Reliability analysis of encapsulation methods for lead -based paint through an accelerated life testing

The adverse health effects of long-term exposure to lead are well established, with major uptake into the human body occurring mainly through oral ingestion by young children. Lead-based paint was frequently used in homes built before 1978, particularly in inner-city areas. Minority populations experience the effects of lead poisoning disproportionately. ^ Lead-based paint abatement is costly. In the United States, residents of about 400,000 homes, occupied by 900,000 young children, lack the means to correct lead-based paint hazards. The magnitude of this problem demands research on affordable methods of hazard control. One method is encapsulation, defined as any covering or coating that acts as a permanent barrier between the lead-based paint surface and the environment. ^ Two encapsulants were tested for reliability and effective life span through an accelerated lifetime experiment that applied stresses exceeding those encountered under normal use conditions. The resulting time-to-failure data were used to extrapolate the failure time under conditions of normal use. Statistical analysis and models of the test data allow forecasting of long-term reliability relative to the 20-year encapsulation requirement. Typical housing material specimens simulating walls and doors coated with lead-based paint were overstressed before encapsulation. A second, un-aged set was also tested. Specimens were monitored after the stress test with a surface chemical testing pad to identify the presence of lead breaking through the encapsulant. ^ Graphical analysis proposed by Shapiro and Meeker and the general log-linear model developed by Cox were used to obtain results. Findings for the 80% reliability time to failure varied, with close to 21 years of life under normal use conditions for encapsulant A. The application of product A on the aged gypsum and aged wood substrates yielded slightly lower times. Encapsulant B had an 80% reliable life of 19.78 years. ^ This study reveals that encapsulation technologies can offer safe and effective control of lead-based paint hazards and may be less expensive than other options. The U.S. Department of Health and Human Services and the CDC are committed to eliminating childhood lead poisoning by 2010. This ambitious target is feasible, provided there is an efficient application of innovative technology, a goal to which this study aims to contribute. ^

Annual report - National Institute of Environmental Health Sciences.

Mode of access: Internet.

Modélisation de l’exposition à la silice cristalline dans le secteur de la construction

L’exposition prolongée par inhalation à des poussières de taille respirable contenant de la silice cristalline est reconnue pour causer des maladies respiratoires dont le cancer du poumon et la silicose. De nombreuses études ont relevé la surexposition des travailleurs de la construction à la silice cristalline, puisque ce composé est présent dans de nombreux matériaux utilisés sur les chantiers. L’évaluation de l’exposition à la silice cristalline dans cette industrie constitue un défi en raison de la multitude de conditions de travail et de la nature éphémère des chantiers. Afin de mieux cerner cette problématique, une banque de données d’exposition professionnelle compilée à partir de la littérature a été réalisée par une équipe de l’Université de Montréal et de l’IRSST, et constitue le point de départ de ce travail. Les données présentes dans la banque ont été divisées en fonction de la stratégie d’échantillonnage, résultant en deux analyses complémentaires ayant pour objectif d’estimer les niveaux d’exposition sur le quart de travail en fonction du titre d’emploi, et selon la nature de la tâche exécutée. La méthode de Monte Carlo a été utilisée pour recréer les échantillons provenant de données rapportées sous forme de paramètres de synthèse. Des modèles Tobit comprenant les variables de titre d’emploi, tâche exécutée, durée, année et stratégie d’échantillonnage, type de projet, secteur d’activité, environnement et moyens de maîtrise ont été développés et interprétés par inférence multimodèle. L’analyse basée sur le quart de travail a été réalisée à partir de 1346 données d’exposition couvrant 11 catégories de titre d’emploi. Le modèle contenant toutes les variables a expliqué 22% de la variabilité des mesures et la durée, l’année et la stratégie d’échantillonnage étaient d’importants prédicteurs de l’exposition. Les chantiers de génie civil et les projets de nouvelle construction étaient associés à des expositions plus faibles, alors que l’utilisation de moyens de maîtrise diminuait les concentrations de 18% à l’extérieur et de 24% à l’intérieur. Les moyennes géométriques les plus élevées prédites pour l’année 1999 sur 8 heures étaient retrouvées chez les foreurs (0.214 mg/m3), les travailleurs souterrains (0.191 mg/m3), les couvreurs (0.146 mg/m3) et les cimentiers-applicateurs (0.125 mg/m3). 1566 mesures réparties en 27 catégories de tâches étaient contenues dans la seconde analyse. Le modèle contenant toutes les variables a expliqué 59% des niveaux d’exposition, et l’ensemble des variables contextuelles étaient fortement prédictives. Les moyennes géométriques prédites pour l’année 1998 et selon la durée médiane par tâche dans la banque de données étaient plus élevées lors du bouchardage du béton (1.446 mg/m3), du cassage de pièces de maçonnerie avec autres outils (0.354 mg/m3), du décapage au jet de sable (0.349 mg/m3) et du meulage de joints de brique (0.200 mg/m3). Une diminution importante des concentrations a été observée avec les systèmes d’arrosage (-80%) et d’aspiration des poussières (-64%) intégrés aux outils. L’analyse en fonction des titres d’emploi a montré une surexposition généralisée à la valeur guide de l’ACGIH et à la norme québécoise, indiquant un risque à long terme de maladies professionnelles chez ces travailleurs. Les résultats obtenus pour l’évaluation en fonction de la tâche exécutée montrent que cette stratégie permet une meilleure caractérisation des facteurs associés à l’exposition et ainsi de mieux cibler les priorités d’intervention pour contrôler les niveaux d’exposition à la silice cristalline sur les chantiers de construction durant un quart de travail.

Pharmacokinetic software for the health sciences - Choosing the right package for teaching purposes

Computer assisted learning has an important role in the teaching of pharmacokinetics to health sciences students because it transfers the emphasis from the purely mathematical domain to an 'experiential' domain in which graphical and symbolic representations of actions and their consequences form the major focus for learning. Basic pharmacokinetic concepts can be taught by experimenting with the interplay between dose and dosage interval with drug absorption (e.g. absorption rate, bioavailability), drug distribution (e.g. volume of distribution, protein binding) and drug elimination (e.g. clearance) on drug concentrations using library ('canned') pharmacokinetic models. Such 'what if' approaches are found in calculator-simulators such as PharmaCalc, Practical Pharmacokinetics and PK Solutions. Others such as SAAM II, ModelMaker, and Stella represent the 'systems dynamics' genre, which requires the user to conceptualise a problem and formulate the model on-screen using symbols, icons, and directional arrows. The choice of software should be determined by the aims of the subject/course, the experience and background of the students in pharmacokinetics, and institutional factors including price and networking capabilities of the package(s). Enhanced learning may result if the computer teaching of pharmacokinetics is supported by tutorials, especially where the techniques are applied to solving problems in which the link with healthcare practices is clearly established.

International mobility in the Pharmacy degree at the school of allied health sciences of Oporto

Background: The Erasmus program is a subprogram of the Lifelong Learning program, exclusive for Higher Education that promotes (among other initiatives), the mobility of students(studies, training or internships). The mobility of students of higher education seeks to improve the quality and development of future professionals, providing a multidisciplinary and multicultural experience. Setting: Academic Pharmacy/Pharmacy Technicians Methods: We conducted a descriptive and transversal study on the implementation of the mobility program and analyze the results, which involved applying a survey to students. Results: Since 2009/2010, the Pharmacy Degree at ESTSP has established 7 SMs protocols resulting in an average mobility of 5 students IN and 7 Students OUT. We have also endeavoured in SMp Protocols for extracurricular training with an average of 3 students OUT. The application process is normally open during the year before the mobility period. For most of the students involved, this was a first time opportunity to be in a foreign country and more than 70% choose the mobility program because it is seen as a possibility to improve their curriculum, for personal development or even to pursue employment opportunities abroad. The mobility for teachers is also encouraged. Conclusions: The exchange of experiences and training, acquired during cooperation activities should be an element of continuous dynamics and institutional affirmation. Initiatives such as the ERASMUS Program contribute to the educational and scientific enrichment, and promote international competitiveness among Higher Education Institutions.

Clustering of variables with a three-way approach for health sciences

TPM Vol. 21, No. 4, December 2014, 435-447 – Special Issue © 2014 Cises.

Psychological distress in health sciences college students and its relationship with academic engagement

Objective: To determine the prevalence of psychological distress and its relationship with academic engagement (absorption, dedication and vigor), sex and degree among students from four public universities. Method: A non-experimental,comparative correlational, quantitative investigation without intervention. Study population: 1840 nursing and physical therapy students. The data collection tool used was a questionnaire. Results: A 32.2% prevalence of psychological distress was found in the subjects; a correlation between vigor and psychological distress was found for all of the subjects and also for women. High absorption and dedication scores and low psychological distress scores predicted higher vigor scores. Conclusion: The risk of psychological distress is high, especially for women. Women seem to have a higher level of psychological distress than men. Vigor, energy and mental resilience positively influence psychological distress and can be a vehicle for better results during the learning and studying process.







Diversity of the Quality Criteria in Qualitative Research in the Health Sciences: Lessons from a Lexicometric Analysis Composed of 133 Guidelines

A review of health sciences literature shows a substantial increase in qualitative publications. This work incorporates a certain number of research quality guidelines. We present the results of the Alceste® lexicometric analysis, which includes 133 quality grids for qualitative research covering five disciplinary fields of the health sciences: medicine and epidemiology, public health and health education, nursing, health sociology and anthropology, psychiatry and psychology. This analysis helped to cross-check the disciplinary fields with the various objectives assigned to the different criteria in the grids examined. The results obtained with Alceste® show the variability of the objectives sought by the authors of the guidelines. These discrepancies are not directly associated to disciplinary fields, and appear to be more closely linked to different qualitative research conceptualizations within the disciplines, and with essential qualitative research validation criteria. These conceptualizations must be clarified to help users better understand the objectives targeted by the grids, and promote more appreciation for qualitative research in the health sciences.

Quality of Qualitative Research in the Health Sciences : Analysis of the Common Criteria Present in 58 Assessment Guidelines by Expert Users

The number of qualitative research methods has grown substantially over the last twenty years, both in social sciences and, more recently, in the health sciences. This growth came with questions on the quality criteria needed to evaluate this work, and numerous guidelines were published. The latters include many discrepancies though, both in their vocabulary and construction. Many expert evaluators decry the absence of consensual and reliable evaluation tools. The authors present the results of an evaluation of 58 existing guidelines in 4 major health science fields (medicine and epidemiology; nursing and health education; social sciences and public health; psychology / psychiatry, research methods and organization) by expert users (article reviewers, experts allocating funds, editors, etc.). The results propose a toolbox containing 12 consensual criteria with the definitions given by expert users. They also indicate in which disciplinary field each type of criteria is known to be more or less essential. Nevertheless, the authors highlight the limitations of the criteria comparability, as soon as one focuses on their specific definitions. They conclude that each criterion in the toolbox must be explained to come to broader consensus and identify definitions that are consensual to all the fields examined and easily operational.

Adherence and perceptions regarding simulation training in undergraduate health Sciences

BACKGROUND: Simulation techniques are spreading rapidly in medicine. Suc h resources are increasingly concentrated in Simulation Laboratories. The MSRP-USP is structuring such a laboratory and is interested in the prevalence of individual initiatives that could be centralized there. The MSRP-USP currently has five full-curriculum courses in the health sciences: Medicine, Speech Therapy, Physical Therapy, Nutrition, and Occupational Therapy, all consisting of core disciplines. GOAL: To determine the prevalence of simulation techniques in the regular courses at MSRP-USP. METHODS: Coordinators of disciplines in the various courses were interviewed using a specifically designed semi-structured questionnaire, and all the collected data were stored in a dedicated database. The disciplines were grouped according to whether they used (GI) or did not use (GII) simulation resources. RESULTS AND DISCUSSION: 256 disciplines were analyzed, of which only 18.3% used simulation techniques, varying according to course: Medicine (24.7.3%), Occupational Therapy (23.0%), Nutrition (15.9%), Physical Therapy (9.8%), and Speech Therapy (9.1%). Computer simulation programs predominated (42.5%) in all five courses. The resources were provided mainly by MSRP-USP (56.3%), with additional funding coming from other sources based on individual initiatives. The same pattern was observed for maintenance. There was great interest in centralizing the resources in the new Simulation Laboratory in order to facilitate maintenance, but there was concern about training and access to the material. CONCLUSIONS: 1) The MSRP-USP simulation resources show low complexity and are mainly limited to computer programs; 2) Use of simulation varies according to course, and is most prevalent in Medicine; 3) Resources are scattered across several locations, and their acquisition and maintenance depend on individual initiatives rather than central coordination or curricular guidelines

Introducing e-learning in a large multisite academic health sciences centre: a case study of e-curriculum planning and educator support /

This qualitative study investigated how a team of 7 hospital educators collaborated to develop e-curriculum units to pilot for a newly acquired learning -r management system at a large, multisite academic health sciences centre. A case study approach was used to examine how the e-Curriculum Team was structured, how the educators worked together to develop strategies to better utilize e-leaming in their ovwi practice, what e-curriculum they chose to develop, and how they determined their priorities for e-curriculum development. It also inquired into how they planned to involve other educators in using e-leaming. One set of semistructured interviews with the 6 hospital educators involved in the project, as well as minutes of team meetings and the researcher's journal, were analyzed (the researcher was also a hospital educator on the team). Project management structure, educator support, and organizational pressures on the implementation project feature prominently in the case study. This study suggests that implementation of e-leaming will be more successful if (a) educators involved in the development of e-leaming curriculum are supported in their role as change agents, (b) the pain of vmleaming current educational practice is considered, (c) the limitations of the software being implemented are recognized, (d) time is spent leaming about best practice, and (e) the project is protected as much as possible from organizational pressures and distractions.

Determining the Effectiveness of the Therapeutic Recreation Specialist - Certified Training at Baycrest Health Sciences

The purpose of this study was to determine the effectiveness of the “Champion” training of the Therapeutic Recreation Specialist – Certified (TRSC) at Baycrest Health Sciences (BHS). BHS recently implemented a new model for Therapeutic Recreation Services that employs the model of champion for implementation of both best and next practices within the organization. This mixed methods study used both case study and program evaluation in order to understand whether the training that comprised of five different topics allowed the six participants to develop the skills needed to be champions. The results supported that learning did occur during the training and that the experience was positive for the participants. The overall finding from this study is that while the training was useful, the participants did not feel confident about utilizing these skills without further training; hence, this training can only be considered an introduction to the concepts presented.

Caractérisation de la composante toxicocinétique du facteur d’ajustement pour la variabilité interindividuelle utilisé en analyse du risque toxicologique

Un facteur d’incertitude de 10 est utilisé par défaut lors de l’élaboration des valeurs toxicologiques de référence en santé environnementale, afin de tenir compte de la variabilité interindividuelle dans la population. La composante toxicocinétique de cette variabilité correspond à racine de 10, soit 3,16. Sa validité a auparavant été étudiée sur la base de données pharmaceutiques colligées auprès de diverses populations (adultes, enfants, aînés). Ainsi, il est possible de comparer la valeur de 3,16 au Facteur d’ajustement pour la cinétique humaine (FACH), qui constitue le rapport entre un centile élevé (ex. : 95e) de la distribution de la dose interne dans des sous-groupes présumés sensibles et sa médiane chez l’adulte, ou encore à l’intérieur d’une population générale. Toutefois, les données expérimentales humaines sur les polluants environnementaux sont rares. De plus, ces substances ont généralement des propriétés sensiblement différentes de celles des médicaments. Il est donc difficile de valider, pour les polluants, les estimations faites à partir des données sur les médicaments. Pour résoudre ce problème, la modélisation toxicocinétique à base physiologique (TCBP) a été utilisée pour simuler la variabilité interindividuelle des doses internes lors de l’exposition aux polluants. Cependant, les études réalisées à ce jour n’ont que peu permis d’évaluer l’impact des conditions d’exposition (c.-à-d. voie, durée, intensité), des propriétés physico/biochimiques des polluants, et des caractéristiques de la population exposée sur la valeur du FACH et donc la validité de la valeur par défaut de 3,16. Les travaux de la présente thèse visent à combler ces lacunes. À l’aide de simulations de Monte-Carlo, un modèle TCBP a d’abord été utilisé pour simuler la variabilité interindividuelle des doses internes (c.-à-d. chez les adultes, ainés, enfants, femmes enceintes) de contaminants de l’eau lors d’une exposition par voie orale, respiratoire, ou cutanée. Dans un deuxième temps, un tel modèle a été utilisé pour simuler cette variabilité lors de l’inhalation de contaminants à intensité et durée variables. Ensuite, un algorithme toxicocinétique à l’équilibre probabiliste a été utilisé pour estimer la variabilité interindividuelle des doses internes lors d’expositions chroniques à des contaminants hypothétiques aux propriétés physico/biochimiques variables. Ainsi, les propriétés de volatilité, de fraction métabolisée, de voie métabolique empruntée ainsi que de biodisponibilité orale ont fait l’objet d’analyses spécifiques. Finalement, l’impact du référent considéré et des caractéristiques démographiques sur la valeur du FACH lors de l’inhalation chronique a été évalué, en ayant recours également à un algorithme toxicocinétique à l’équilibre. Les distributions de doses internes générées dans les divers scénarios élaborés ont permis de calculer dans chaque cas le FACH selon l’approche décrite plus haut. Cette étude a mis en lumière les divers déterminants de la sensibilité toxicocinétique selon le sous-groupe et la mesure de dose interne considérée. Elle a permis de caractériser les déterminants du FACH et donc les cas où ce dernier dépasse la valeur par défaut de 3,16 (jusqu’à 28,3), observés presqu’uniquement chez les nouveau-nés et en fonction de la substance mère. Cette thèse contribue à améliorer les connaissances dans le domaine de l’analyse du risque toxicologique en caractérisant le FACH selon diverses considérations.