Final design and implementation plan for evaluating the effectiveness of FMVSS 108: side marker lamps and high intensity headlamps (only). Tasks #4 and #5 report.

National Highway Traffic Safety Administration, Washington, D.C.

Application of digital image processing techniques to the photometric testing of vehicle headlamps

The aim of this Interdisciplinary Higher Degrees project was the development of a high-speed method of photometrically testing vehicle headlamps, based on the use of image processing techniques, for Lucas Electrical Limited. Photometric testing involves measuring the illuminance produced by a lamp at certain points in its beam distribution. Headlamp performance is best represented by an iso-lux diagram, showing illuminance contours, produced from a two-dimensional array of data. Conventionally, the tens of thousands of measurements required are made using a single stationary photodetector and a two-dimensional mechanical scanning system which enables a lamp's horizontal and vertical orientation relative to the photodetector to be changed. Even using motorised scanning and computerised data-logging, the data acquisition time for a typical iso-lux test is about twenty minutes. A detailed study was made of the concept of using a video camera and a digital image processing system to scan and measure a lamp's beam without the need for the time-consuming mechanical movement. Although the concept was shown to be theoretically feasible, and a prototype system designed, it could not be implemented because of the technical limitations of commercially-available equipment. An alternative high-speed approach was developed, however, and a second prototype syqtem designed. The proposed arrangement again uses an image processing system, but in conjunction with a one-dimensional array of photodetectors and a one-dimensional mechanical scanning system in place of a video camera. This system can be implemented using commercially-available equipment and, although not entirely eliminating the need for mechanical movement, greatly reduces the amount required, resulting in a predicted data acquisiton time of about twenty seconds for a typical iso-lux test. As a consequence of the work undertaken, the company initiated an 80,000 programme to implement the system proposed by the author.

Even moderate visual impairments degrade drivers’ ability to see pedestrians at night

Purpose: To determine the effect of moderate levels of refractive blur and simulated cataracts on nighttime pedestrian conspicuity in the presence and absence of headlamp glare. Methods: The ability to recognize pedestrians at night was measured in 28 young adults (M=27.6 years) under three visual conditions: normal vision, refractive blur and simulated cataracts; mean acuity was 20/40 or better in all conditions. Pedestrian recognition distances were recorded while participants drove an instrumented vehicle along a closed road course at night. Pedestrians wore one of three clothing conditions and oncoming headlamps were present for 16 participants and absent for 12 participants. Results: Simulated visual impairment and glare significantly reduced the frequency with which drivers recognized pedestrians and the distance at which the drivers first recognized them. Simulated cataracts were significantly more disruptive than blur even though photopic visual acuity levels were matched. With normal vision, drivers responded to pedestrians at 3.6x and 5.5x longer distances on average than for the blur or cataract conditions, respectively. Even in the presence of visual impairment and glare, pedestrians were recognized more often and at longer distances when they wore a “biological motion” reflective clothing configuration than when they wore a reflective vest or black clothing. Conclusions: Drivers’ ability to recognize pedestrians at night is degraded by common visual impairments even when the drivers’ mean visual acuity meets licensing requirements. To maximize drivers’ ability to see pedestrians, drivers should wear their optimum optical correction, and cataract surgery should be performed early enough to avoid potentially dangerous reductions in visual performance.

Cost evaluation for nine Federal Motor Vehicle Safety Standards. Volume II: FMVSS 108. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

A relative effectiveness analysis of a selected fixed lighting system versus vehicle headlights. Appendix to final report.

Mode of access: Internet.

Evaluation of glare from following vehicle headlights. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Appendices for evaluation of glare from following vehicle headlights. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Guidelines for improving the stability of headlamp aim. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Interaction between fixed and vehicular illumination systems. Phase II. Interim report.

Federal Highway Administration, Office of Research, Washington, D.C.

Monetary value drivers place on comfort in night driving. Final report.

Federal Highway Administration, Office of Research, Washington, D.C.

Implementation analysis for daytime headlamp use. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Vehicle lighting; a bibliography.

Mode of access: Internet.

Three-beam headlight evaluation. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Development of headlight system performance criteria. Final report.

National Highway Traffic Safety Administration, Washington, D.C.