Quality of mechanized coffee harvesting in circular planting system

A colheita mecanizada de café se destaca como um dos principais avanços tecnológicos em benefício dos produtores, porém, problemas com planejamento no plantio e desenvolvimento da cultura, bem como falhas na regulagem da colhedora, podem acarretar em redução na eficiência da operação, tornando-a mais estressante para a cultura que a colheita manual. Diante disso, o presente trabalho foi realizado no município de Patos de Minas, MG, com o objetivo de avaliar os danos na parte vegetativa e a qualidade da colheita mecanizada do café cultivado em plantio circular sob pivô central, com duas frequências de vibração das hastes, sob o controle estatístico do processo. Observou-se que a bienalidade negativa sobre a cultura reduziram a carga inicial de café, eliminando o efeito das condições de insolação. Os índices de qualidade da colheita apresentaram distribuição assimétrica, com grande variabilidade nas amostras, sendo apenas a eficiência de derriça influenciada pelos eixos avaliados, e se mostrando estável pelo controle estatístico. Os danos causados às plantas pela colheita apresentaram valores desejáveis, não variando em função dos fatores analisados, mas sendo considerado sob controle estatístico.

Manual do produtor: como evitar desperdicios nas colheitas de soja, do milho e do arroz.

1998

Colheita mecanizada e perdas quantitativas de sementes de crotalária

In mechanized harvesting of seeds can occur losses, which reduce productivity, decrease the profitability and can do serious damage to the producer. The objective of this work was to evaluate the quantitative seed losses of Crotalaria juncea depending on the harvester speed and the rotation of the threshing cylinder. The experiment was conducted in the area of Education, Research and Production Unesp/Jaboticabal, using a entirely casualized design on factorial away 2x3, with two-speed displacement of the machine (1.8 and 3.2 km h(-1)) and three rotations of threshing cylinder (750, 800 and 850 rpm), with 4 repetitions. It was concluded that the measures relating to the development of the plants showed homogeneous behavior, indicating little dispersion of the data. It was observed that the rate of displacement of the harvester and rotation of the drum track not affected the losses in the plataform of cutting. The largest losses of crotalaria seeds occurred on the plataform of cutting the harvester machine, in the form of pods not harvested. It was observed that the total losses in the harvest of crotalaria seed were high, and the losses in pods on the soil, responsible for almost all the losses encountered.

Qualidade física e fisiológica de semente de soja colhida com sistema de trilha axial sob diferentes velocidades de operação e rotações do cilindro trilhador

A colheita mecanizada é ferramenta fundamental no processo produtivo das grandes culturas; se não for realizada adequadamente, poderá resultar em danos mecânicos severos às sementes, acarretando, prejuízos significativos na colheita, particularmente devido à redução da qualidade. Visando a avaliar os danos causados na colheita mecanizada de soja, o presente trabalho teve como objetivo estudar o efeito do sistema de trilha axial sobre a percentagem de bandinhas, impurezas e sementes quebradas de soja cv. M-Soy 8001, em função da velocidade de trabalho e rotação do cilindro trilhador. O delineamento experimental utilizado foi o inteiramente casualizado, em parcelas subdivididas, avaliando-se duas rotações do cilindro trilhador (400 e 500 rpm) e três velocidades de operação (3,5; 4,5 e 5,5 km h-1), com três repetições. Os resultados obtidos indicam que as combinações de velocidade de operação e rotações do cilindro de trilha avaliadas não afetam as variáveis vigor, impurezas, bandinha, emergência em areia e índice de velocidade de germinação e que o aumento da rotação de 400 para 500 rpm ocasiona o aumento de sementes quebradas.

Qualidade da colheita mecanizada de feijão (Phaseolus vulgaris) em dois sistemas de preparo do solo

Dentre as etapas de produção do feijoeiro a colheita é uma das mais importantes, porque pode interferir de maneira decisiva na qualidade e no custo de produção. Assim, objetivou-se avaliar a qualidade da operação da colheita mecanizada de feijão (Phaseolus vulgaris), cultivado sob preparo convencional e plantio direto. As variáveis analisadas foram: o nível de ruído emitido, calculado através de um medidor de pressão sonora; o desempenho operacional, sendo monitorado o consumo de combustível, a patinagem dos rodados e a velocidade de deslocamento do conjunto coletados em uma central digital (datalogger); e a operação de colheita quanto à matéria seca e densidade de palhada, e as perdas na colheita. A velocidade e os consumos horário e operacional apresentaram distribuição normal dos dados, enquanto que o nível de ruído apresentou distribuição assimétrica. As perdas na colheita mecanizada de feijão e a densidade de palhada apresentaram baixa variabilidade e distribuição normal. Assim, apenas o consumo horário e a produção de matéria seca de palhada apresentaram comportamento instável em relação ao controle estatístico de processo, enquanto os demais indicadores mostraram condições de manter a qualidade da operação de colheita tanto no preparo convencional de solo quanto no plantio direto.

Variabilidade espacial e controle estatístico do processo de perdas na colheita mecanizada do algodoeiro

Dentro do processo produtivo, a colheita, se mal conduzida, poderá causar prejuízos quali-quantitativos no produto final. Dessa forma, esse trabalho teve o objetivo de avaliar as perdas quantitativas, no solo e na planta, na colheita mecanizada de algodão, no ano agrícola de 2006, em Ipameri-GO, em um talhão de 1,4 ha, sendo georreferenciados 41 pontos, distanciados de 50 m no sentido da curva de nível e 9 m entre fileiras. As amostras foram coletadas colocando-se uma armação de 4,5 m² sobre o solo, coletando todo o algodão caído no solo e, em seguida, fez-se a coleta do algodão que permaneceu na planta após a passagem da colhedora. Além das perdas quantitativas determinaram-se o teor médio de água do algodão e o Rendimento Potencial Máximo (RPM). Foram construídas cartas de controle para verificar a qualidade da operação de colheita. Observou-se que as perdas na colheita do algodão foram altas, principalmente as perdas no solo (PS), indicando que a colhedora não apresentou boa eficiência de colheita. As perdas no solo não apresentaram dependência espacial, enquanto as perdas na planta e totais apresentaram dependência moderada e forte, respectivamente. O processo de colheita de algodão não se encontra dentro dos padrões de qualidade, sob o ponto de vista de controle estatístico de processo, devendo ser revistas as condições de colheita.

Desempenho operacional do conjunto trator-recolhedora de feijão

A colheita mecanizada do feijão apresenta altos custos. Além disso, as características botânicas e a alta tendência ao acamamento do feijoeiro dificultam o uso de colhedoras combinadas. O presente trabalho teve como objetivo avaliar o desempenho operacional do conjunto trator-recolhedora-trilhadora de feijão e quantificar as perdas ocasionadas durante a colheita, em Jaboticabal, SP. Foi utilizado delineamento inteiramente casualizado, com fatorial 2 x 3, combinando-se dois sistemas de preparo de solo (convencional e plantio direto) e três velocidades teóricas de trabalho (V1, V2 e V3, correspondendo a 4,0; 4,9 e 5,8km h-1, respectivamente), com quatro repetições, totalizando 24 observações. O nível de ruído, os consumos volumétrico e ponderal, a taxa de alimentação da máquina, a matéria seca e a densidade da palhada, as perdas na plataforma da recolhedora e totais não são influenciadas pelos sistemas de preparo do solo (preparo convencional e plantio direto) e pelas velocidades de trabalho. As perdas ocorridas no sistema de trilha, separação e limpeza são menores na velocidade de 4,9km h-1.

Perdas quantitativas na colheita mecanizada de soja em diferentes condições operacionais de duas colhedoras

Mechanized harvesting losses are one of the main problems in the soybean production. This work aimed characterize the quantitative losses of productivity for area, in the mechanized harvesting system in commercial production soybean grains, in function of harvesting displacement speed and year of production. The test was accomplished using a randomized design in a fatorial scheme 2x2, being treatments composed by two harvesting operating in two speeds, 4,0 a 4,5 km h(-1) and 6,0 a 7,0 km h(-1), with five replications for each treatment. The harvesting used Massey Ferguson 5650 Advanced, year of production 2003 e Massey Ferguson 5650 Advanced, year of production 2004. They were evaluated the soybean grains losses caused by the cleaning and separation systems, cut deficiency in the harvesting cutterhead and total losses. The results showed the losses of systems of separation was influenced by harvesting, and the others variables are not significative alterations and the losses in the systems of cleaning showed more contribution for the total losses.

Densidade de semeadura da soja e profundidade de deposição do adubo no sistema plantio direto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of the sample area in the variability of losses in the mechanical harvesting of soybeans

The mechanical harvesting is an important stage in the production process of soybeans and, in this process; the loss of a significant number of grains is common. Despite the existence of mechanisms to monitor these losses, it is still essential to use sampling methods to quantify them. Assuming that the size of the sample area affects the reliability and variability between samples in quantifying losses, this paper aimed to analyze the variability and feasibility of using different sizes of sample area (1, 2 and 3 m²) in quantifying losses in the mechanical harvesting of soybeans. Were sampled 36 sites and the cutting losses, losses by other mechanisms of the combine and total losses were evaluated, as well as the water content in seeds, straw distribution and crop productivity. Data were subjected to statistical analysis (descriptive statistics and analysis of variance) and Statistical Control Process (SCP). The coefficients of variation were similar for the three frames available. Combine losses showed stable behavior, whereas cutting losses and total losses showed unstable behavior. The frame size did not affect the quantification and variability of losses in the mechanical harvesting of soybeans, thus a frame of 1 m² can be used for determining losses.

Sediment and nutrient losses from exotic Pinus plantation management operations under simulated rainfall

Rainfall simulation experiments were carried out to measure runoff and soil water fluxes of suspended solids, total nitrogen, total phosphorus, dissolved organic carbon and total iron from sites in Pinus plantations on the coastal lowlands of south-eastern Queensland subjected to various operations (treatments). The operations investigated were cultivated and nil-cultivated site preparation, fertilised site preparation, clearfall harvesting and prescribed burning; these treatments were compared with an 8-y-old established plantation. Flow-weighted mean concentrations of total nitrogen and total phosphorus in surface runoff from the cultivated and nil-cultivated site-preparation, clearfall harvest, prescribed burning and 8-y-old established plantation treatments were very similar. However, both the soil water and the runoff from the fertilised site preparation treatment contained more nitrogen (N) and phosphorus (P) than the other treatments - with 3.10 mg N L-1 and 4.32 mg P L-1 (4 and 20 times more) in the runoff. Dissolved organic carbon concentrations in runoff from the nil-cultivated site-preparation and prescribed burn treatments were elevated. Iron concentrations were highest in runoff from the nil-cultivated site-preparation and 8-y-old established plantation treatments. Concentrations of suspended solids in runoff were higher from cultivated site preparation and prescribed burn treatments, and reflect the great disturbance of surface soil at these sites. The concentrations of all analytes were highest in initial runoff from plots, and generally decreased with time. Total nitrogen (mean 7.28, range 0.11-13.27 mg L-1) and total phosphorus (mean 11.60, range 0.06-83.99 mg L-1) concentrations in soil water were between 2 and 10 times greater than in surface runoff, which highlights the potential for nutrient fluxes in interflow (i.e. in the soil above the water table) through the general plantation area. Implications in regard to forest management are discussed, along with results of larger catchment-scale studies.

Harvesting undelimbed Scots pine (Pinus sylvestris L.) from first thinnings for integrated production of kraft pulp and energy

The present study evaluates the feasibility of undelimbed Scots pine (Pinus sylvestris L.) for integrated production of pulp and energy in a kraft pulp mill from the technical, economic and environmental points of view, focusing on the potential of bundle harvesting. The feasibility of tree sections for pulp production was tested by conducting an industrial wood-handling experiment, laboratory cooking and bleaching trials, using conventional small-diameter Scots pine pulpwood as a reference. These trials showed that undelimbed Scots pine sections can be processed in favourable conditions as a blend with conventional small-diameter pulpwood without reducing the pulp quality. However, fibre losses at various phases of the process may increase when using undelimbed material. In the economic evaluation, both pulp production and wood procurement costs were considered, using the relative wood paying capability of a kraft pulp mill as a determinant. The calculations were made for three Scots pine first-thinning stands with the breast-height diameter of the removal (6 12 cm) as the main distinctive factor. The supply chains included in the comparison were based on cut-to-length harvesting, whole-tree harvesting and bundle harvesting (whole-tree bundling). With the current ratio of pulp and energy prices, the wood paying capability declines with an increase in the proportion of the energy fraction of the raw material. The supply system based on the cut-to-length method was the most efficient option, resulting in the highest residual value at stump in most cases. A decline in the pulp price and an increase in the energy price improved the competitiveness of the whole-tree systems. With short truck transportation distances and low pulp prices, however, the harvesting of loose whole trees can result in higher residual value at stump in small-diameter stands. While savings in transportation costs did not compensate for the high cutting and compaction costs by the second prototype of the bundle harvester, an increase in transportation distances improved its competitiveness. Since harvesting undelimbed assortments increases nutrient export from the site, which can affect soil productivity, the whole-tree alternatives included in the present study cannot be recommended on infertile peatlands and mineral soils. The harvesting of loose whole trees or bundled whole trees implies a reduction in protective logging residues and an increase in site traffic or payloads. These factors increase the risk of soil damage, especially on peat soils with poor bearing capacity. Within the wood procurement parameters which were examined, the CO2 emissions of the supply systems varied from 13 27 kg m3. Compaction of whole trees into bundles reduced emissions from transportation by 30 39%, but these reductions were insufficient to compensate for the increased emissions from cutting and compaction.

Harvesting Excitons Via Two Parallel Channels for Efficient White Organic LEDs with Nearly 100% Internal Quantum Efficiency: Fabrication and Emission-Mechanism Analysis

By incorporating two phosphorescent dyes, namely, iridium(III)[bis(4,6-difluorophenyl)-pyridinato-N,C-2']picolinate (Flrpic) for blue emission and bis(2-(9,9-diethyl-9H-fluoren-2-yl)-1-phenyl-1 H-benzoimidazol-N,C-3) iridium(acetylacetonate) ((fbi)(2)Ir(acac)) for orange emission, into a single-energy well-like emissive layer, an extremely high-efficiency white organic light-emitting diode (WOLED) with excellent color stability is demonstrated. This device can achieve a peak forward-viewing power efficiency of 42.5 lm W-1, corresponding to an external quantum efficiency (EQE) of 19.3% and a current efficiency of 52.8 cd A(-1). Systematic studies of the dopants, host and dopant-doped host films in terms of photophysical properties (including absorption, photoluminescence, and excitation spectra), transient photoluminescence, current density-voltage characteristics, and temperature-dependent electroluminescence spectra are subsequently performed, from which it is concluded that the emission natures of Flrpic and (fbi)(2)Ir(acac) are, respectively, host-guest energy transfer and a direct exciton formation process. These two parallel pathways serve to channel the overall excitons to both dopants, greatly reducing unfavorable energy losses.

Rapid Losses of Surface Elevation following Tree Girdling and Cutting in Tropical Mangroves.

Discussion Conclusions Materials and Methods Acknowledgments Author Contributions References Reader Comments (0) Figures Abstract The importance of mangrove forests in carbon sequestration and coastal protection has been widely acknowledged. Large-scale damage of these forests, caused by hurricanes or clear felling, can enhance vulnerability to erosion, subsidence and rapid carbon losses. However, it is unclear how small-scale logging might impact on mangrove functions and services. We experimentally investigated the impact of small-scale tree removal on surface elevation and carbon dynamics in a mangrove forest at Gazi bay, Kenya. The trees in five plots of a Rhizophora mucronata (Lam.) forest were first girdled and then cut. Another set of five plots at the same site served as controls. Treatment induced significant, rapid subsidence (−32.1±8.4 mm yr−1 compared with surface elevation changes of +4.2±1.4 mm yr−1 in controls). Subsidence in treated plots was likely due to collapse and decomposition of dying roots and sediment compaction as evidenced from increased sediment bulk density. Sediment effluxes of CO2 and CH4 increased significantly, especially their heterotrophic component, suggesting enhanced organic matter decomposition. Estimates of total excess fluxes from treated compared with control plots were 25.3±7.4 tCO2 ha−1 yr−1 (using surface carbon efflux) and 35.6±76.9 tCO2 ha−1 yr−1 (using surface elevation losses and sediment properties). Whilst such losses might not be permanent (provided cut areas recover), observed rapid subsidence and enhanced decomposition of soil sediment organic matter caused by small-scale harvesting offers important lessons for mangrove management. In particular mangrove managers need to carefully consider the trade-offs between extracting mangrove wood and losing other mangrove services, particularly shoreline stabilization, coastal protection and carbon storage.