(Table 1) Chemical composition of Mediterranean halite from DSDP Hole 13-134

Bromine content of a 15 cm halite core from Deep Sea Drilling Project Leg XIII Hole 134 was analyzed at 1.5 cm intervals. The Br varies from 140 to 254 ppm, and three maxima were found to coincide with three postulated horizons of desiccation. The Br profile confirms the interpretation from sedimentologic evidence that Mediterranean salts were deposited in a desiccating basin.

Particle motion near a nuclear detonation in halite : final report/

"Issued: September 5, 1963"--Cover ; "February 1963"--Title page.

Particle motion near a nuclear detonation in halite : preliminary report /

"U.S. Atomic Energy Commission, Plowshare Program ; Project Gnome, Carlsbad, New Mexico, December 10, 1961"--Cover.

Intrusion of Lamprophyre dyke and related deformation effects in the host rock salt: A case study from the Loulé Diapir, Portugal

A rock salt-lamprophyre dyke contact zone (sub-vertical, NE-SW strike) was investigated for its petrographic, mechanic and physical properties by means of anisotropy of magnetic susceptibility CAMS) and rock magnetic properties, coupled with quantitative microstructural analysis and thermal mathematical modelling. The quantitative microstructural analysis of halite texture and solid inclusions revealed good spatial correlation with AMS and halite fabrics. The fabrics of both lamprophyre and rock salt record the magmatic intrusion, "plastic" flow and regional deformation (characterized by a NW-SE trending steep foliation). AMS and microstructural analysis revealed two deformation fabrics in the rock salt: (1) the deformation fabrics in rock salt on the NW side of the dyke are associated with high temperature and high fluid activity attributed to the dyke emplacement; (2) On the opposite side of the dyke, the emplacement-related fabric is reworked by localized tectonic deformation. The paleomagnetic results suggest significant rotation of the whole dyke, probably during the diapir ascent and/or the regional Tertiary to Quaternary deformation. (C) 2014 Elsevier B.V. All rights reserved.

Remediation of a marine shore tailings deposit and the importance of water-rock interaction on element cycling in the coastal aquifer

We present the study of the geochemical processes associated with the first successful remediation of a marine shore tailings deposit in a coastal desert environment (Bahia de Ite, in the Atacama Desert of Peru). The remediation approach implemented a wetland on top of the oxidized tailings. The site is characterized by a high hydrauliz gradient produced by agricultural irrigation on upstream gravel terraces that pushed river water (similar to 500 mg/L SO(4)) toward the sea and through the tailings deposit. The geochemical and isotopic (delta(2)H(water) and delta(18)O(water), delta(34)S(sulfate) , delta(18)O(sulfate)) approach applied here revealed that evaporite horizons (anhydrite and halite) in the gravel terraces are the source of increased concentrations of SO(4), Cl, and Na up to similar to 1500 mg/L in the springs at the base of the gravel terraces. Deeper groundwater interacting with underlying marine sequences increased the concentrations of SO(4), Cl, and Na up to 6000 mg/L and increased the alkalinity up to 923 mg/L CaCO(3) eq. in the coastal aquifer. These waters infiltrated into the tailings deposit at the shelf-tailings interface. Nonremediated tailings had a low-pH oxidation zone (pH 1-4) with significant accumulations of efflorescent salts (10-20 cm thick) at the surface because of upward capillary transport of metal cations in the arid climate. Remediated tailings were characterized by neutral pH and reducing conditions (pH similar to 7, Eh similar to 100 mV). As a result, most bivalent metals such as Cu, Zn, and Ni had very low concentrations (around 0.01 mg/L or below detection limit) because of reduction and sorption processes. In contrast, these reducing conditions increased the mobility of iron from two sources in this system: (1) The originally Fe(III)-rich oxidation zone, where Fe(II) was reduced during the remediation process and formed an Fe(II) plume, and (2) reductive dissolution of Fe(III) oxides present in the original shelf lithology formed an Fe-Mn plume at 10-m depth. These two Fe-rich plumes were pushed toward the shoreline where more oxidizing and higher pH conditions triggered the precipitation of Fe(HI)hydroxide coatings on silicates. These coatings acted as a filter for the arsenic, which naturally infiltrated with the river water (similar to 500 mu g/L As natural background) into the tailings deposit.

Effects of Deicing Salt Trace Compounds on Deterioration of Portland Cement Concrete, HR-271, 1987

A study was made of the detrimental effects of trace amounts of calcium sulfate (occurring naturally in halite deposits used for deicing) on portland cement concrete pavements. It was found that sulfate introduced as gypsum with sodium chloride in deicing brines can have detrimental effects on portland cement mortar. Concentrations of sulfate as low as 0.5% of the solute rendered the brine destructive. Conditions of brine application were critical to specimen durability. The mechanisms of deterioration were found to be due to pore filling resulting from compound formation and deposition. A field evaluation of deteriorating joints suggests that the sulfate phenomena demonstrated in the laboratory also operates in the field. A preliminary evaluation was made of remedies: limits on sulfates, fly ash admixtures, treatment of existing pavement, and salt treatments. This report gives details of the research objectives, experimental design, field testing, and possible solutions. Recommendations for further study are presented.

Geochemical evolution of active porphyry copper tailings impoundments : from alkaline deposition towards acidification

J. Smuda: Geochemical evolution of active porphyry copper tailings impoundments Thesis abstract Mine waste is the largest volume of materials handled in the world. The oxidation of sulfidic mine waste may result in the release of acid mine drainage (AMD) rich in heavy metals and arsenic to the environment, one of the major problems the mining industry is facing today. To control and reduce this environmental impact, it is crucial to identify the main geochemical and hydrological processes influencing contaminant liberation, transport, and retention. This thesis presents the results of a geochemical, mineralogical and stable isotope study (δ2H, δ18O, δ34S) from two active porphyry copper tailings impoundments in Mediterranean (Carén tailings impoundment, El Teniente mine, Central Chile) and hyper-arid climate (Talabre tailings impoundment, Chuquicamata, Northern Chile) from the deposition in alkaline environment (pH 10.5) towards acidification after several years of exposure. The major hydrological results were the identification of vertical contaminant and water transport in the uppermost, not water-saturated zone, triggered by capillary rise due to evaporation, and infiltration downwards due to new tailings deposition, and of horizontal transport in the groundwater zone. At the surface of the sedimented tailings, evaporation of pore water led to the precipitation of Na-Ca-Mg sulfates (e.g., gypsum, tenorite), in hyper-arid climate also halite. At the Carén tailings impoundment, renewed deposition in a 4-week interval inhibited a pH decrease below neutral values and the formation of an efflorescent salt crust. At the Talabre tailings impoundment, deposition breaks of several years resulted in the formation of acidic oxidation zones in the timeframe of less than 4 years. This process enabled the transport of liberated Cu, Zn, and Fe via capillary rise to the surface, where these metals precipitated as heavy-metal sulfates (e.g., devilline, krohnkite) and chlorides (eriochalcite, atacamite). Renewed depositing may dissolve efflorescent salts and transport liberated elements towards the groundwater zone. This zone was found to be highly dynamic due to infiltration and mixing with water from different sources, like groundwater, catchment water, and infiltration from superficial waters. There, Cu was found to be partially mobile due to complexation with Cl (in Cl-rich groundwater, Talabre) and dissolved organic matter (in zones with infiltration of catchment water rich in dissolved organic matter, Carén). A laboratory study on the isotopic fractionation of sulfur and oxygen of sulfate in different minerals groups (water-soluble sulfates, low- and high-crystalline Fe(III) oxyhydroxides) contributed to the use of stable isotopes as tracer of geochemical and transport processes for environmental studies. The results highlight that a detailed geochemical, stable isotope and mineralogical study permits the identification of contamination processes and pathways already during the deposition of mine tailings. This knowledge allows the early planning of adequate actions to reduce and control the environmental impact during tailings deposition and after the closing of the impoundment. J. Smuda: Geochemical evolution of active porphyry copper tailings impoundments Résumé de these Les déchets miniers constituent les plus grands volumes de matériel gérés dans le monde. L'oxydation des déchets miniers sulfuriques peut conduire à la libération de drainages miniers acides (DMA) riches en métaux et arsenic dans l'environnement, ce qui est l'un des principaux problèmes de l'industrie minière aujourd'hui. Pour contrôler et réduire ces impacts sur l'environnement, il est crucial d'identifier les principaux processus géochimiques et hydrologiques influençant la libération, le transport et la rétention des contaminants. Cette thèse présente les résultats d'une étude géochimique, minéralogique et des isotopes stables (δ2H, δ18O, δ34S) sur des déchets miniers de 2 sites de dépôt actifs en climat méditerranéen (Dépôt de déchets de Carén, mine de El Teniente, Centre du Chili) et en climat hyper-aride (Dépôt de déchets de Talabre, mine de Chuquicamata, Nord du Chili). L'objectif était d'étudier l'évolution des déchets de la déposition en milieu alcalin (pH = 10.5) vers l'acidification après plusieurs années d'exposition. Le principal résultat hydrologique a été l'identification de 2 types de transport : un transport vertical de l'eau et des contaminants dans la zone non saturée en surface, induit par la montée capillaire due à l'évaporation et par l'infiltration subséquente de la déposition de sédiments frais ; et un transport horizontal dans la zone des eaux souterraines. À la surface des déchets, l'évaporation de l'eau interstitielle conduit à la précipitation de sulfates de Na-Ca-Mg (ex. gypse, ténorite) et halite en climat hyper-aride. Dans le site de Carén, une nouvelle déposition de déchets frais à 4 semaines intervalle a empêché la baise du pH en deçà des valeurs neutres et la formation d'une croûte de sels efflorescentes en surface. Dans le site de Talabre, les fentes de dessiccation des dépôts ont entraîné la formation d'une zone d'oxydation à pH acide en moins de 4 ans. Ce processus a permis la libération et le transport par capillarité de Cu, Zn, Fe vers la surface, où ces éléments précipitent sous forme de sulfates de métaux lourds (ex., dévilline, krohnkite) de chlorures (ex. ériochalcite, atacamite). Une nouvelle déposition de sédiments frais pourrait dissoudre ces sels et les transporter vers la zone des eaux souterraines. Cette dernière zone était très dynamique en raison du mélange d'eaux provenant de différentes sources, comme les eaux souterraines, l'eau de captage et l'infiltration des eaux superficielles. Egalement dans cette zone, le cuivre était partiellement mobile à cause de la formation de complexe avec le chlore (dans les zone riche en Cl, Talabre) et avec la matière organique dissoute (dans les zones où s'infiltre l'eau de captage riche en matière organique, Carén). Une étude en laboratoire sur le fractionnement des isotopes stables de sulfure et d'oxygène des sulfates dans différents groupes de minéraux (sulfates hydrosolubles, sulfures de oxy-hydroxyde de Fe(III) faiblement ou fortement cristallins) a permis d'apporter une contribution à leur utilisation comme traceurs dans l'étude des processus géochimiques et de transport lors d'études environnementales. Les résultats montrent qu'une étude détaillée de la géochimie, des isotopes stables et de la minéralogie permet d'identifier les processus et les voies de contamination déjà pendant la période de dépôt des déchets miniers. Cette connaissance permet de planifier, dès le début de l'exploitation, des mesures adéquates pour réduire et contrôler l'impact sur l'environnement pendant la période de dépôts de déchets miniers et après la fermeture du site.

Geochemistry and water quality of Lake Qarun, Egypt

Water geochemistry is a very important tool for studying the water quality in a given area. Geology and climate are the major natural factors controlling the chemistry of most natural waters. Anthropogenic impacts are the secondary sources of contamination in natural waters. This study presents the first integrative approach to the geochemistry and water quality of surface waters and Lake Qarun in the Fayoum catchment, Egypt. Moreover, geochemical modeling of Lake Qarun was firstly presented. The Nile River is the main source of water to the Fayoum watershed. To investigate the quality and geochemistry of this water, water samples from irrigation canals, drains and Lake Qarun were collected during the period 2010‒2013 from the whole Fayoum drainage basin to address the major processes and factors governing the evolution of water chemistry in the investigation area. About 34 physicochemical quality parameters, including major ions, oxygen isotopes, trace elements, nutrients and microbiological parameters were investigated in the water samples. Multivariable statistical analysis was used to interpret the interrelationship between the different studied parameters. Geochemical modeling of Lake Qarun was carried out using Hardie and Eugster’s evolutionary model and a model simulated by PHREEQC software. The crystallization sequence during evaporation of Lake Qarun brine was also studied using a Jänecke phase diagram involving the system Na‒K‒Mg‒ Cl‒SO4‒H2O. The results show that the chemistry of surface water in the Fayoum catchment evolves from Ca- Mg-HCO3 at the head waters to Ca‒Mg‒Cl‒SO4 and eventually to Na‒Cl downstream and at Lake Qarun. The main processes behind the high levels of Na, SO4 and Cl in downstream waters and in Lake Qarun are dissolution of evaporites from Fayoum soils followed by evapoconcentration. This was confirmed by binary plots between the different ions, Piper plot, Gibb’s plot and δ18O results. The modeled data proved that Lake Qarun brine evolves from drainage waters via an evaporation‒crystallization process. Through the precipitation of calcite and gypsum, the solution should reach the final composition "Na–Mg–SO4–Cl". As simulated by PHREEQC, further evaporation of lake brine can drive halite to precipitate in the final stages of evaporation. Significantly, the crystallization sequence during evaporation of the lake brine at the concentration ponds of the Egyptian Salts and Minerals Company (EMISAL) reflected the findings from both Hardie and Eugster’s evolutionary model and the PHREEQC simulated model. After crystallization of halite at the EMISAL ponds, the crystallization sequence during evaporation of the residual brine (bittern) was investigated using a Jänecke phase diagram at 35 °C. This diagram was more useful than PHREEQC for predicting the evaporation path especially in the case of this highly concentrated brine (bittern). The predicted crystallization path using a Jänecke phase diagram at 35 °C showed that halite, hexahydrite, kainite and kieserite should appear during bittern evaporation. Yet the actual crystallized mineral salts were only halite and hexahydrite. The absence of kainite was due to its metastability while the absence of kieserite was due to opposed relative humidity. The presence of a specific MgSO4.nH2O phase in ancient evaporite deposits can be used as a paleoclimatic indicator. Evaluation of surface water quality for agricultural purposes shows that some irrigation waters and all drainage waters have high salinities and therefore cannot be used for irrigation. Waters from irrigation canals used as a drinking water supply show higher concentrations of Al and suffer from high levels of total coliform (TC), fecal coliform (FC) and fecal streptococcus (FS). These waters cannot be used for drinking or agricultural purposes without treatment, because of their high health risk. Therefore it is crucial that environmental protection agencies and the media increase public awareness of this issue, especially in rural areas.

The origin of brines underlying Lake Kinneret

Lake Kinneret (LK) is a relatively fresh water take situated in the Dead Sea Rift (DSR) Valley. The pore water (PW) in the sediments underlying LK pelagic zone have significantly higher salinity than that of the lake. The concentrations of major ion solutes (Cl, Br, Na, K, Mg) in PW from six 2.4 m to 5.1 m long sediment cores increase linearly with depth, indicating the occurrence of saline, deep seated brines. The upper part of the PW column is affected by the much fresher boundary with LK water and in most cores is characterized by gradually increasing Br/Cl and decreasing Na, Mg, K/Cl molar ratios, which tend to stabilize at about 2.0 m below the sediment surface. The 'stable' molar ratios in the deeper PW vary spatially and are supposed to represent the ratios in the deep underlying brines at each site. When plotted as Na/Cl vs. Br/Cl, the stable ratios of the northern and central part of the lake fall close to a straight line which characterizes many of the brines in the DSR Valley. However, the respective ratios in the southern part of the lake fall markedly off the DSR line. Moreover, Na/Cl and K/Cl molar ratios in the south are significantly higher than in the central and northern parts. delta Cl-37 measured in present LK water is ca. 0.0 parts per thousand. Along the PW column at the lake center, delta Cl-37 is becoming more positive with depth, reaching values of about +0.5 parts per thousand to +0.6 parts per thousand at 3 m depth. Even more positive values (+0.7 parts per thousand to +0.8 parts per thousand) are detected further north, in PW from deeper sediment layers. In contrast, in PW from the southeastern part of the lake, delta Cl-37 is becoming more negative with depth (-1.0 parts per thousand at similar to 2.6 m). It is suggested that these isotopic differences are also indicative of spatial variability in the PW brine sources. O-18 and D values in the PW of all 3 m long cores are similar and resemble the respective levels in LK. The source of H2O in 3 m deep, bed sediments is claimed to be the overlying lake water, and therefore water isotopes do not provide a clue regarding the original water isotopic composition in the underlying brines. PW from the southeast with higher K/Cl and Na/Cl but lower concentrations of these solutes, suggest leaching by meteoric water of sub-surface halite and post-halite salt formations, while the more saline PW from the northern and central parts, that have lower K/Cl and Na/Cl, and higher Br/Cl, are similar to DSR brines and represent underlying residual brines. (C) 2009 Elsevier B.V. All rights reserved.

Os efeitos Delaware e Groningen: um estudo quantitativo por elementos finitos

Os efeitos Delaware e Groningen são dois tipos de anomalia que afetam ferramentas de eletrodos para perfilagem de resistividade. Ambos os efeitos ocorrem quando há uma camada muito resistiva, como anidrita ou halita, acima do(s) reservatório(s), produzindo um gradiente de resistividade muito similar ao produzido por um contato óleo-água. Os erros de interpretação produzidos têm ocasionado prejuízos consideráveis à indústria de petróleo. A PETROBRÁS, em particular, tem enfrentado problemas ocasionados pelo efeito Groningen sobre perfis obtidos em bacias paleozóicas da região norte do Brasil. Neste trabalho adaptamos, com avanços, uma metodologia desenvolvida por LOVELL (1990), baseada na equação de Helmholtz para H_Φ, para modelagem dos efeitos Delaware e Groningen. Solucionamos esta equação por elementos finitos triangulares e retangulares. O sistema linear gerado pelo método de elementos finitos é resolvido por gradiente bi-conjugado pré-condicionado, sendo este pré-condicionador obtido por decomposição LU (Low Up) da matriz de stiffness. As voltagens são calculadas por um algoritmo, mais preciso, recentemente desenvolvido. Os perfis são gerados por um novo algoritmo envolvendo uma sucessiva troca de resistividade de subdomínios. Este procedimento permite obter cada nova matriz de stiffness a partir da anterior pelo cálculo, muito mais rápido, da variação dessa matriz. Este método permite ainda, acelerar a solução iterativa pelo uso da solução na posição anterior da ferramenta. Finalmente geramos perfis sintéticos afetados por cada um dos efeitos para um modelo da ferramenta Dual Laterolog.

Efeitos das variações sazonais do clima tropical úmido sobre as águas e sedimentos de manguezais do estuário do rio Marapanim, costa nordeste do Estado do Pará

ABSTRACT: To evaluate the short period climatic variations impact over Amazonic mangrove ecosystem, studies were carried out on the northeast coast of Para State. Sediments, surficial and interstitial waters were collected and examinated throughout salinity, pH and Eh (mV) measurements; mineralogical determination using X-ray diffraction and electronic microscopy. Chemical analysis of dissolved sulfides, sulfate and chloride, among others were made in samples collected seasonally, under spring and neap tides conditions. The seasonal chloride variations in the interstitial waters shows 20 g/l during the dry season and less of 10 g/l in the season; the concentration in surficial are higher at neap tides (rainy season) and spring tide (dry season). The dissolved sulfides were found only at 10 cm, indicating sediment exposure to the atmospheric oxygen advectives fluxes. The dissolved iron rates increases between 0-10 cm and the pH tends to neutrality. The saturation of interstitial waters at dry season is indicated by evaporitic minerals: gypsum and halite. The pluviometric variations are responsible by gradual changes in the nutrient and physical chemical properties of surficial and interstitial waters, into the saline equilibrium control at coastal waters, in the salinization and desalinization of sediments and the distribution of mangrove vegetation at the estuary. The prolonged exposure of sediments during the dry season and the morphological characteristics contribute to the total or partial oxidation of surficial sediments, modifying the mineralogy of sediments and the physical chemical characteristics of interstitial waters.

Inclusões fluidas crepitadas, fluidos hipersalinos e aquo-carbônicos em quartzo associado a rochas micáceas no Granito Xinguara - Terreno Granito-Greenstone de Rio Maria, PA

As rochas micáceas encontradas no Granito Xinguara, terreno Granito-Greenstone de Rio Maria, Pará, são compostas por muscovita e clorita com níveis de quartzo intercalados, que formam uma xistosidade bem desenvolvida. Essa xistosidade é cortada por veios de quartzo. Ambas as gerações de quartzo apresentam os mesmos tipos de inclusões fluidas em halos ou trilhas secundárias de composições variadas entre aquosas, aquo-carbônicas e saturadas em torno de grandes inclusões primárias crepitadas ou em trilhas transgranulares secundárias. A grande variação de temperaturas de homogeneização, a alta salinidade, as evidências de estrangulamento e a existência das inclusões crepitadas permitem supor forte influência de alterações pós-formacionais e reequilíbrio relacionados à intrusão do granito. Essas rochas foliadas são, portanto, enclaves metassedimentares afetados por fluidos graníticos hipersalinos aquo-carbônicos.

Mineralogia e geoquímica de sedimentos de manguezais da costa amazônica: o exemplo do estuário do rio Marapanim (Pará)

Os manguezais do estado do Pará representam importante segmento da costa norte brasileira sobre os quais pouco se conhece das características geológicas e as relações com área(s)-fonte. A pesquisa foi realizada no estuário do rio Marapanim, na costa paraense, para demonstrar a contribuição de sedimentos continentais para a formação dos sedimentos dos manguezais. Foram coletados sedimentos da Formação Barreiras e solos dela derivados (principais fontes terrígenas), e os sedimentos de manguezal. Nos sedimentos de manguezal foram realizadas análises granulométricas, determinação dos teores de carbono (C %) e medidas de pH, Eh e salinidade intersticial. A determinação mineralógica e a geoquímica multi-elementar foi feita nos sedimentos lamosos e nos sedimentos continentais adjacentes, para comparações. Os sedimentos de manguezal são sílticoargilosos (> 90 %), com teores de carbono entre 0,75 a 3,5 %. A mineralogia principal é composta por quartzo, goethita, hematita, caulinita, illita, além de zircão, turmalina, estaurolita e cianita como acessórios, assinatura mineralógica típica dos sedimentos da Formação Barreiras e dos solos. De ocorrência comum nesses manguezais, os minerais neoformados são: esmectita, feldspato potássico, pirita, halita, gipso e a jarosita. O enriquecimento em SiO₂, Al₂O₃, Fe₂O₃, e TiO₂ nos manguezais e os níveis crustais dos metais-traço refletem o clima tropical e a composição mineralógica da área-fonte, rica em quartzo e caulinita e a ausência de influência antrópica. A composição química associada à matéria orgânica, abundantes diatomáceas além de Fe, S e os aportes de Cl^-, Na⁺, K⁺, Ca⁺⁺ e Mg⁺⁺ da água do mar, identificam o ambiente deposicional e os minerais autigênicos. O padrão de fracionamento dos elementos-traço nos manguezais também corrobora a marcante contribuição da área-fonte continental. Esses sedimentos apresentam o predomínio dos Elementos Terras Rara Leves (ETRL) sobre os Elementos Terras Raras Pesados (ETRP) com elevadas razões de Th/Co; La/Th; La/Sc; La/Co e Zr/Sc e Th/ Sc e Ba/Co, elementos presentes nas rochas ígneas félsicas que originaram os sedimentos terrígenos.