Clinical audit of COPD patients requiring hospital admissions in Spain: AUDIPOC study.

BACKGROUNDS AUDIPOC is a nationwide clinical audit that describes the characteristics, interventions and outcomes of patients admitted to Spanish hospitals because of an exacerbation of chronic obstructive pulmonary disease (ECOPD), assessing the compliance of these parameters with current international guidelines. The present study describes hospital resources, hospital factors related to case recruitment variability, patients' characteristics, and adherence to guidelines. METHODOLOGY/PRINCIPAL FINDINGS An organisational database was completed by all participant hospitals recording resources and organisation. Over an 8-week period 11,564 consecutive ECOPD admissions to 129 Spanish hospitals covering 70% of the Spanish population were prospectively identified. At hospital discharge, 5,178 patients (45% of eligible) were finally included, and thus constituted the audited population. Audited patients were reassessed 90 days after admission for survival and readmission rates. A wide variability was observed in relation to most variables, hospital adherence to guidelines, and readmissions and death. Median inpatient mortality was 5% (across-hospital range 0-35%). Among discharged patients, 37% required readmission (0-62%) and 6.5% died (0-35%). The overall mortality rate was 11.6% (0-50%). Hospital size and complexity and aspects related to hospital COPD awareness were significantly associated with case recruitment. Clinical management most often complied with diagnosis and treatment recommendations but rarely (<50%) addressed guidance on healthy life-styles. CONCLUSIONS/SIGNIFICANCE The AUDIPOC study highlights the large across-hospital variability in resources and organization of hospitals, patient characteristics, process of care, and outcomes. The study also identifies resources and organizational characteristics associated with the admission of COPD cases, as well as aspects of daily clinical care amenable to improvement.

Modelagem plana industrial do vestuário: diretrizes para a indústria do vestuário e o ensino-aprendizado

Pós-graduação em Design - FAAC

Modelagem plana industrial do vestuário: diretrizes para a indústria do vestuário e o ensino-aprendizado

The work shows the importance of process modeling in industrial flat field fashion design. This was achieved by a qualitative study identifying vision of modelers, students and teachers about this stage of development and production clothing product in the regional center of Londrina – PR. This research allowed the development of methodological guidelines for the teaching and preparation Modeling Industrial flat clothing.

Guidelines for reporting evaluations based on observational methodology

Resumen tomado de la publicaci??n

A methodology for determination of grade crossing resource-allocation guidelines. Final report.

Federal Railroad Administration, Office of Research and Development, Washington, D.C.

Coastal facility guidelines : a methodology for development with environmental case studies on marinas and power plants : working paper.

Mode of access: Internet.

UsaGame – A new methodology to support user- centered design of touchscreen game applications

Dissertação para Obtenção do Grau de Mestre em Engenharia e Gestão Industrial

Clinical practice guidelines in Portugal : quantitative and qualitative evaluation

RESUMO: Introdução As normas de orientação clínica são ferramentas úteis na translação de conhecimentos desde a investigação para a prática clínica diária. Estratégias ativas de implementação de normas de orientação clínica requerem elevado esforço organizacional e financeiro. Quando os recursos são escassos, as estratégias passivas podem ser a única opção de disseminação. Desde 2011 a Direção Geral da Saúde publicou cento e cinquenta e nove normas de orientação clínica. Nesta Tese é feita uma avaliação do impacto que estratégias de disseminação de normas de orientação clínica têm no padrão de prescrição dos médicos e uma avaliação qualitativa do processo das normas de orientação clínica em Portugal. Métodos: O primeiro artigo é um estudo quasi experimental usando uma série de análises temporais interrompida para comparar os níveis observados e esperados de prescrição de inibidores da ciclooxigenasa-2, antes e depois da publicação da norma de orientação clínica sobre a utilização de anti-inflamatórios não esteroides. O segundo estudo é um artigo de opinião e debate no qual numa primeira parte contextualiza o processo das normas da Direcção Geral da Saúde, na segunda parte aponta virtudes e defeitos no processo e a terceira parte constitui uma contribuição com vista à melhoria do processo. Discussão A produção de normas de orientação clínica requer metodologia rigorosa e complexa. A literatura médica revela que a translação de conhecimento é uma tarefa árdua. Estratégias de implementação ativas requerem recursos financeiros e organizacionais sólidos. Estratégias de implementação passivas podem representar uma solução aceitável se os recursos financeiros e organizacionais escasseiam. Pouco é conhecido sobre a eficácia destas estratégias fora do contexto de investigação. Com esta Tese pretendo contribuir para a clarificação desta resposta, outros países e instituições podem ver utilidade nesta informação, bem como pretendo contribuir para a discussão e melhoria do processo das normas de orientação clínica em Portugal. ------------------ ABSTRACT: Introduction Clinical practice guidelines can help address the failure to translate research findings into clinical practice. Active clinical practice guidelines implementation strategies require active efforts from organizations and are resource and financially demanding. Passive implementation strategies may represent the only option if resources are scarce. Out of research environment, real world efficacy of passive implementation strategies is still undetermined. Since 2011 the Portuguese General Health Directorate published one hundred and fifty nine guidelines. In this Thesis I evaluate the impact of passive dissemination of clinical practice guideline in clinician’s prescription behavior and review, from a qualitative point of view, the Portuguese clinical practice guideline process. Methods The first study is a quasi-experimental study using a retrospective interrupted time-series analysis design to compare the observed and expected prescription of cyclooxygenase-2 before and after the non steroidal antiinflammatory guideline publication. The second study is an opinion and debate article in which I firstly review the General Health Directorate guideline process. The second part states positive and negative aspects in the process and the third part is a contribution aimed at improving the process in the future. Discussion Clinical practice guidelines production demands a rigorous and complex methodology. medical iterature reveals that knowledge translation is a difficult task. Active implementation strategies demand solid financial and organizational resources. Passive implementation strategies may represent an acceptable solution if financial and organizational resources are scarce. Little is known about the efficacy of these strategies out of the research context. With this Thesis I intend to contribute to clarify this question, other countries and institutions with similar conditions may find this information useful, and also to contribute for the discussion and general improvement of national clinical practice guidelines process.

Evaluation system in the European Commission : DEVCO’S evaluation methodology

Mestrado em Economia e Políticas Públicas

Appropriate treatment for Crohn's disease: methodology and summary results of a multidisciplinary international expert panel approach--EPACT.

BACKGROUND/AIMS: For many therapeutic decisions in Crohn's disease (CD), high-grade evidence is lacking. To assist clinical decision-making, explicit panel-based appropriateness criteria were developed by an international, multidisciplinary expert panel. METHODS: 10 gastroenterologists, 3 surgeons and 2 general practitioners from 12 European countries assessed the appropriateness of therapy for CD using the RAND Appropriateness Method. Their assessment was based on the study of a recent literature review of the subject, combined with their own expert clinical judgment. Panelists rated clinical indications and treatment options using a 9-point scale (1 = extremely inappropriate; 9 = extremely appropriate). These scenarios were then discussed in detail at the panel meeting and re-rated. Median ratings and disagreement were used to aggregate ratings into three assessment categories: appropriate (A), uncertain (U) and inappropriate (I). RESULTS: 569 specific indications were rated, dealing with 9 clinical presentations: mild/moderate luminal CD (n = 104), severe CD (n = 126), steroid-dependent CD (n = 25), steroid-refractory CD (n = 37), fistulizing CD (n = 49), fibrostenotic CD (n = 35), maintenance of medical remission of CD (n = 84), maintenance of surgical remission (n = 78), drug safety in pregnancy (n = 24) and use of infliximab (n = 7). Overall, 146 indications (26%) were judged appropriate, 129 (23%) uncertain and 294 (52%) inappropriate. Frank disagreement was low (14% overall) with the greatest disagreement (54% of scenarios) being observed for treatment of steroid-refractory disease. CONCLUSIONS: Detailed explicit appropriateness criteria for the appropriate use of therapy for CD were developed for the first time by a European expert panel. Disease location, severity and previous treatments were the main factors taken into account. User-friendly access to EPACT criteria is available via an Internet site, www.epact.ch, allowing prospective evaluation and improvement of appropriateness of current CD therapy.

Maps as risk mitigation tools. Adaptation of the Swiss hazard assessment and mapping methodology to a Moroccan site: Beni Mellal

Dans le contexte climatique actuel, les régions méditerranéennes connaissent une intensification des phénomènes hydrométéorologiques extrêmes. Au Maroc, le risque lié aux inondations est devenu problématique, les communautés étant vulnérables aux événements extrêmes. En effet, le développement économique et urbain rapide et mal maîtrisé augmente l'exposition aux phénomènes extrêmes. La Direction du Développement et de la Coopération suisse (DDC) s'implique activement dans la réduction des risques naturels au Maroc. La cartographie des dangers et son intégration dans l'aménagement du territoire représentent une méthode efficace afin de réduire la vulnérabilité spatiale. Ainsi, la DDC a mandaté ce projet d'adaptation de la méthode suisse de cartographie des dangers à un cas d'étude marocain (la ville de Beni Mellal, région de Tadla-Azilal, Maroc). La méthode suisse a été adaptée aux contraintes spécifiques du terrain (environnement semi-aride, morphologie de piémont) et au contexte de transfert de connaissances (caractéristiques socio-économiques et pratiques). Une carte des phénomènes d'inondations a été produite. Elle contient les témoins morphologiques et les éléments anthropiques pertinents pour le développement et l'aggravation des inondations. La modélisation de la relation pluie-débit pour des événements de référence, et le routage des hydrogrammes de crue ainsi obtenus ont permis d'estimer quantitativement l'aléa inondation. Des données obtenues sur le terrain (estimations de débit, extension de crues connues) ont permis de vérifier les résultats des modèles. Des cartes d'intensité et de probabilité ont été obtenues. Enfin, une carte indicative du danger d'inondation a été produite sur la base de la matrice suisse du danger qui croise l'intensité et la probabilité d'occurrence d'un événement pour obtenir des degrés de danger assignables au territoire étudié. En vue de l'implémentation des cartes de danger dans les documents de l'aménagement du territoire, nous nous intéressons au fonctionnement actuel de la gestion institutionnelle du risque à Beni Mellal, en étudiant le degré d'intégration de la gestion et la manière dont les connaissances sur les risques influencent le processus de gestion. L'analyse montre que la gestion est marquée par une logique de gestion hiérarchique et la priorité des mesures de protection par rapport aux mesures passives d'aménagement du territoire. Les connaissances sur le risque restent sectorielles, souvent déconnectées. L'innovation dans le domaine de la gestion du risque résulte de collaborations horizontales entre les acteurs ou avec des sources de connaissances externes (par exemple les universités). Des recommandations méthodologiques et institutionnelles issues de cette étude ont été adressées aux gestionnaires en vue de l'implémentation des cartes de danger. Plus que des outils de réduction du risque, les cartes de danger aident à transmettre des connaissances vers le public et contribuent ainsi à établir une culture du risque. - Severe rainfall events are thought to be occurring more frequently in semi-arid areas. In Morocco, flood hazard has become an important topic, notably as rapid economic development and high urbanization rates have increased the exposure of people and assets in hazard-prone areas. The Swiss Agency for Development and Cooperation (SADC) is active in natural hazard mitigation in Morocco. As hazard mapping for urban planning is thought to be a sound tool for vulnerability reduction, the SADC has financed a project aimed at adapting the Swiss approach for hazard assessment and mapping to the case of Morocco. In a knowledge transfer context, the Swiss method was adapted to the semi-arid environment, the specific piedmont morphology and to socio-economic constraints particular to the study site. Following the Swiss guidelines, a hydro-geomorphological map was established, containing all geomorphic elements related to known past floods. Next, rainfall / runoff modeling for reference events and hydraulic routing of the obtained hydrographs were carried out in order to assess hazard quantitatively. Field-collected discharge estimations and flood extent for known floods were used to verify the model results. Flood hazard intensity and probability maps were obtained. Finally, an indicative danger map as defined within the Swiss hazard assessment terminology was calculated using the Swiss hazard matrix that convolves flood intensity with its recurrence probability in order to assign flood danger degrees to the concerned territory. Danger maps become effective, as risk mitigation tools, when implemented in urban planning. We focus on how local authorities are involved in the risk management process and how knowledge about risk impacts the management. An institutional vulnerability "map" was established based on individual interviews held with the main institutional actors in flood management. Results show that flood hazard management is defined by uneven actions and relationships, it is based on top-down decision-making patterns, and focus is maintained on active mitigation measures. The institutional actors embody sectorial, often disconnected risk knowledge pools, whose relationships are dictated by the institutional hierarchy. Results show that innovation in the risk management process emerges when actors collaborate despite the established hierarchy or when they open to outer knowledge pools (e.g. the academia). Several methodological and institutional recommendations were addressed to risk management stakeholders in view of potential map implementation to planning. Hazard assessment and mapping is essential to an integrated risk management approach: more than a mitigation tool, danger maps represent tools that allow communicating on hazards and establishing a risk culture.

Consensus statement of the European guidelines on clinical management of HIV-1 tropism testing

Introduction: Testing for HIV tropism is recommended before prescribing a chemokine receptor blocker. To date, in most European countries HIV tropism is determined using a phenotypic test. Recently, new data have emerged supporting the use of a genotypic HIV V3-loop sequence analysis as the basis for tropism determination. The European guidelines group on clinical management of HIV-1 tropism testing was established to make recommendations to clinicians and virologists. Methods: We searched online databases for articles from Jan 2006 until March 2010 with the terms: tropism or CCR5-antagonist or CCR5 antagonist or maraviroc or vicriviroc. Additional articles and/or conference abstracts were identified by hand searching. This strategy identified 712 potential articles and 1240 abstracts. All were reviewed and finally 57 papers and 42 abstracts were included and used by the panel to reach a consensus statement. Results: The panel recommends HIV-tropism testing for the following indications: i) drug-naïve patients in whom toxicity or limited therapeutic options are foreseen; ii) patients experiencing therapy failure whenever a treatment change is considered. Both the phenotypic Enhanced Trofile assay (ESTA) and genotypic population sequencing of the V3-loop are recommended for use in clinical practice. Although the panel does not recommend one methodology over another it is anticipated that genotypic testing will be used more frequently because of its greater accessibility, lower cost and shorter turnaround time. The panel also provides guidance on technical aspects and interpretation issues. If using genotypic methods, triplicate PCR amplification and sequencing testing is advised using the G2P interpretation tool (clonal model) with an FPR of 10%. If the viral load is below the level of reliable amplification, proviral DNA can be used, and the panel recommends performing triplicate testing and use of an FPR of 10%. If genotypic DNA testing is not performed in triplicate the FPR should be increased to 20%. Conclusions: The European guidelines on clinical management of HIV-1 tropism testing provide an overview of current literature, evidence-based recommendations for the clinical use of tropism testing and expert guidance on unresolved issues and current developments. Current data support both the use of genotypic population sequencing and ESTA for co-receptor tropism determination. For practical reasons genotypic population sequencing is the preferred method in Europe.

Development of Abutment Design Standards for Local Bridge Designs, Volume 1 of 3, Development of Design Methodology, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume (this volume) summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Development of Abutment Design Standards for Local Bridge Designs, Volume 3 of 3, Verification of Design Methodology, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume (this volume) provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

ESPEN Guidelines on Parenteral Nutrition: intensive care.

Nutritional support in the intensive care setting represents a challenge but it is fortunate that its delivery and monitoring can be followed closely. Enteral feeding guidelines have shown the evidence in favor of early delivery and the efficacy of use of the gastrointestinal tract. Parenteral nutrition (PN) represents an alternative or additional approach when other routes are not succeeding (not necessarily having failed completely) or when it is not possible or would be unsafe to use other routes. The main goal of PN is to deliver a nutrient mixture closely related to requirements safely and to avoid complications. This nutritional approach has been a subject of debate over the past decades. PN carries the considerable risk of overfeeding which can be as deleterious as underfeeding. Therefore the authors will present not only the evidence available regarding the indications for PN, its implementation, the energy required, its possible complementary use with enteral nutrition, but also the relative importance of the macro- and micronutrients in the formula proposed for the critically ill patient. Data on long-term survival (expressed as 6 month survival) will also be considered a relevant outcome measure. Since there is a wide range of interpretations regarding the content of PN and great diversity in its practice, our guidance will necessarily reflect these different views. The papers available are very heterogeneous in quality and methodology (amount of calories, nutrients, proportion of nutrients, patients, etc.) and the different meta-analyses have not always taken this into account. Use of exclusive PN or complementary PN can lead to confusion, calorie targets are rarely achieved, and different nutrients continue to be used in different proportions. The present guidelines are the result of the analysis of the available literature, and acknowledging these limitations, our recommendations are intentionally largely expressed as expert opinions.