Influence of glyceryl guaiacolate ether on anesthetics in tilapia compared to benzocaine and eugenol

Objective. The study aimed to investigate the effectiveness of glyceryl guaiacolate ether (GGE) and compare the times of induction, recovery, hematological changes, total protein and glycaemia among anesthetics in Nile tilapia, Oreochromis niloticus. Materials and methods. A total of 60 tilapia distributed in 3 aquariums (N=20) were used, which formed the group benzocaine (100 mg/L), eugenol (50 mg/L) and guaiacol glyceryl ether (9.000 mg/L). After the induction of anesthesia fish blood samples were collected to determine the complete hemogram and glycemia. Then the animals were placed in aquariums with running water for assessing the anesthesia recovery. Results. It was verified that GGE showed longer induction and recovery times as well a significant increase (p<0.05) of glycemia, when compared with the other groups (p<0.05). The concentration of total protein did not differ between groups (p>0.05). An increase in the number of monocytes in the group treated with benzocaine (p<0.05) was observed in the analysis of the hematological parameters with no difference between groups for other variables. Conclusions. Eugenol and benzocaine allow rapid induction and recovery in Nile tilapia, without evidence of stress during handling and GGE showed high induction and recovery times, being inadequate for anesthetic use in Nile tilapia.

2-Arachidonyl glyceryl ether, an endogenous agonist of the cannabinoid CB1 receptor

Two types of endogenous cannabinoid-receptor agonists have been identified thus far. They are the ethanolamides of polyunsaturated fatty acids—arachidonoyl ethanolamide (anandamide) is the best known compound in the amide series—and 2-arachidonoyl glycerol, the only known endocannabinoid in the ester series. We report now an example of a third, ether-type endocannabinoid, 2-arachidonyl glyceryl ether (noladin ether), isolated from porcine brain. The structure of noladin ether was determined by mass spectrometry and nuclear magnetic resonance spectroscopy and was confirmed by comparison with a synthetic sample. It binds to the CB1 cannabinoid receptor (Ki = 21.2 ± 0.5 nM) and causes sedation, hypothermia, intestinal immobility, and mild antinociception in mice. It binds weakly to the CB2 receptor (Ki > 3 μM).

Evaluation of Hemodynamic, Metabolic, and Electrolytic Changes After Graft Reperfusion in a Porcine Model of Intestinal Transplantation

Background. We sought to establish an anesthetic protocol to evaluate the hemodynamic, metabolic, and electrolytic changes after graft reperfusion in pigs undergoing orthotopic intestinal transplant (ITX).Methods. Fifteen pigs were distributed into two groups: GI (n = 6), without immunosuppression, and GII (n = 9), immunosuppressed before surgery with tacrolimus (0.3 mg/kg). The animals were premedicated at 1 hour before surgery with IM acepromazine (0.1 mg/kg), morphine (0.4 mg/kg), ketamine (10 mg/kg), and atropine (0.044 mg/kg IM). Anesthesia induction used equal proportions of diazepam and ketamine (0.1-0.15 mL/kg/IV) and for maintenance in IV infusion of xylazine (1 mg/mL), ketamine (2 mg/mL), and guaiacol glyceryl ether 5% (50 mg/mL), diluted in 250 mL of 5% glucose solution. In addition, recipient pigs were treated with isofluorane inhalation. Heart rate (HR), systolic (SAP), mean (MAP), and diastolic (DAP) arterial pressure, pulse oximetry, respiratory frequency (f), capnography, body temperature (T), blood gas analysis (pH, PaCO(2), PaO(2), base excess, BE; HCO(3)(-), SatO(2)), serum potassium (K), calcium (Ca), sodium, hematocrit (Hct), and glucose (Glu) were measured at four times; MO: after incision (basal value); M1: 10 minutes before reperfusion; and M2 and M3: 10 and 20 minutes after graft reperfusion.Results. All groups behaved in a similar pattern. There was significant hypotension after graft reperfusion in GI and GII (M2 = 56.2 +/- 6.4 and M3 = 57.2 +/- 8.3 mm Hg and M2 = 65.7 +/- 10.2 and M3 = 67.8 +/- 16.8 mm Hg, respectively), accompanied by elevated HR. The ETCO(2) was elevated at M2 (42 mm Hg) and M3 (40 mm Hg). Metabolic acidosis was observed after reperfusion, with significant increase in K levels.Conclusion. The anesthetic protocol for donors and recipients was safe to perform the procedure, allowing control of hemodynamic and metabolic changes after reperfusion without differences regarding immunosuppression.

Total intravenous anaesthesia in ponies using detomidine, ketamine and guaiphenesin: Pharmacokinetics, cardiopulmonary and endocrine effects

Pharmacokinetics and some pharmacological effects of anaesthesia induced by a combination of detomidine, ketamine and guaiphenesin were investigated in eight ponies. Cardiopulmonary function was studied and plasma met-enkephalin, dynorphin, β-endorphin; arginine vasopressin, adrenocorticotrophin, cortisol, 11-deoxycortisol and catecholamine concentrations were measured. The combination produced slight cardiorespiratory depression, hyperglycaemia and a reduction in haematocrit. There were no changes in plasma opioids, pituitary peptides or catecholamines. Plasma cortisol concentration decreased and plasma 11-deoxycortisol increased indicating a suppression of steroidogenesis. Steady state ketamine and guaiphenesin concentrations were attained during the infusion period, and ketamine concentrations likely to provide adequate analgesia for surgical operations were achieved (more than 2.2 μg ml-1). Steady state detomidine concentration was not attained. The ponies took on average 68 minutes to recover to standing and the recovery was uneventful.

Efeitos cardiorrespiratórios da administração subaracnóide de cetamina ou da associação com ifenprodil em equinos anestesiados com sevofluorano

Pós-graduação em Cirurgia Veterinária - FCAV

Guaiacol transprotection: replacement of the phenoxy isopropyl protecting function by acetyl

A one-step method for the conversion of isopropyl protected guaiacols to the corresponding acetates is reported. Treating 6-substituted isopropyl protected guaiacols with trimethylsilyl trifluoromethanesulfonate in a mixture of acetic anhydride and acetonitrile affords 6-substituted guaiacol acetates in yields ranging from 35% to 99%. (C) 2003 Elsevier Ltd. All rights reserved.

Emulsified systems based on glyceryl monostearate and potassium cetyl phosphate: Scale-up and characterization of physical properties

introducing a pharmaceutical product on the market involves several stages of research. The scale-up stage comprises the integration of previous phases of development and their integration. This phase is extremely important since many process limitations which do not appear on the small scale become significant on the transposition to a large one. Since scientific literature presents only a few reports about the characterization of emulsified systems involving their scaling-up, this research work aimed at evaluating physical properties of non-ionic and anionic emulsions during their manufacturing phases: laboratory stage and scale-up. Prototype non-ionic (glyceryl monostearate) and anionic (potassium cetyl phosphate) emulsified systems had the physical properties by the determination of the droplet size (D[4,3 1, mu m) and rheology profile. Transposition occurred from a batch of 500-50,000 g. Semi-industrial manufacturing involved distinct conditions: intensity of agitation and homogenization. Comparing the non-ionic and anionic systems, it was observed that anionic emulsifiers generated systems with smaller droplet size and higher viscosity in laboratory scale. Besides that, for the concentrations tested, augmentation of the glyceryl monostearate emulsifier content provided formulations with better physical characteristics. For systems with potassium cetyl phosphate, droplet size increased with the elevation of the emulsifier concentration, suggesting inadequate stability. The scale-up provoked more significant alterations on the rheological profile and droplet size on the anionic systems than the non-ionic. (C) 2008 Elsevier B.V. All rights reserved.

NMR study of the radiation-induced cross-linking of poly(tetrafluoroethylene-co-perfluoromethyl vinyl ether)

The gamma-radiolysis of poly(tetrafluoroethylene-co-perfuoromethyl vinyl ether) (TFE/PMVE) was investigated using solid state F-19 and C-13 NMR spectroscopy. Chain scission products identified in the polymer were saturated chain ends -CF2CF3 (G = 1.0), methyl ether end groups -CF2OCF3 (G = 0.9), acid end groups -CF2COOH (G = 0.5), and a small amount of terminal unsaturation -CF=CF2 (G = 0.2). A mechanism for the formation of these scission products was proposed and the G value for main chain scission, G(S), was determined to be 1.4. Cross-linking of TFE/PMVE was found to proceed via a Y-linking mechanism. The G value for cross-linking, G(X), was determined to be 0.9. A maximum of 0.2 mol % cross-links were formed under the experimental conditions.

Effect of temperature on the gamma-radiolysis of poly(tetrafluoroethylene-co-perfluoromethyl vinyl ether)

The effect of irradiation temperature on the polymer properties was investigated for the fluoroelastomer poly(tetrafluoroethylene-co-perfluoromethylvinyl ether) (TFE/PMVE). TFE/PMVE samples were gamma-irradiated to 150 kGy at temperatures ranging from 77 K to 373 K. Analysis of the sol/gel behaviour, tensile properties, and glass transition temperatures indicated that crosslinking commenced in the temperature range 195 to 263 K, for a dose of 150 kGy. The latter temperature was 13 K below the glass transition temperature. Crosslinking remained relatively constant to higher temperatures. Chain scission reactions were found to occur well below the glass transition temperature and increased at higher temperatures. The optimum temperature for the radiation crosslinking of TFE/PMVE, for the temperatures investigated, was 263 K. (C) 1998 Elsevier Science Ltd. All rights reserved.

Thermal and mechanical properties of radiation crosslinked poly(tetrafluoroethylene-co-perfluoromethyl vinyl ether)

The gamma-radiolysis of poly(tetrafluoroethylene-co-perfluoromethyl vinyl ether) (TFE/PMVE) was investigated using chemical and mechanical analyses. The polymer was found to form an insoluble network with a dose of gelation of 15.8 kGy. Tensile and glass transition temperature measurements indicated the predominance of crosslinking, with optimal elastomeric properties reached in the dose range of 120 to 200 kGy. Photoacoustic FTIR spectroscopy CPAS) showed the formation of new carboxylic acid end groups on irradiation. These new end groups were shown to decrease the thermal oxidative stability of the crosslinked network as determined by thermal gravimetric analysis. Electron spin resonance (ESR) studies of the polymer at 77 K indicated the presence of radical precursors. A G-value of 1.1 was determined for radical production at 77 K. Comparison of radical concentrations for a copolymer with a different mole ratio of PMVE, indicated that the PMVE units contribute to scission reactions. (C) 1998 Elsevier Science Ltd. All rights reserved.

The use of crosslinking promoters in the gamma-radiolysis of poly(tetrafluoroethylene-co-perfluoromethylvinyl ether). I

Incorporation of 1 wt % of triallyl isocyanurate (TAIC) significantly enhanced the radiation crosslinking of the perfluoroelastomer, poly(tetrafluoroethylene-co-perfluoromethylvinyl ether) (TFE/PMVE). The dose for gelation was lowered by 70% with the presence of TAIC. The additive also improved the tensile properties of TFE/ PMVE both before and after crosslinking by irradiation. Higher radical yields were obtained with the presence of TAIC at 77 K, indicating the crosslinking promoter was acting as a radical trap. ESR studies showed that radiolysis of TAIC and subsequent photobleaching cleaved an allyl branch from the ring structure. Upon thermal annealing, an allyl radical on the TAIC molecule was observed. (C) 1999 John Wiley & Sons, Inc.

Polymerization of diglycidyl ether of bisphenol A/diaminodiphenyl sulfone epoxy resins using radio frequency fields

Curing of diglycidyl ether of bisphenol A/diaminodiphenyl sulfone (DGEBA/DDS) epoxy resin has been effected by heating with radio frequency (RF) radiation at frequencies of 30-99 MHz. The epoxy resins can be cured rapidly at low RF power levels. Comparison of the kinetics of the RF curing with thermal curing while maintaining the same curing temperature revealed no differences. Previous differences in rates of thermal and microwave curing are believed to be due to lack of temperature control during microwave curing. For RF curing,the rate of cure, at constant power level, increases at lower RF frequency, thus emphasizing one of the principal advantages of RF curing over microwave curing. (C) 1999 John Wiley & Sons, Inc.