Stratigraphic Model Predictions of Geoacoustic Properties

Geoacoustic properties of the seabed have a controlling role in the propagation and reverberation of sound in shallow-water environments. Several techniques are available to quantify the important properties but are usually unable to adequately sample the region of interest. In this paper, we explore the potential for obtaining geotechnical properties from a process-based stratigraphic model. Grain-size predictions from the stratigraphic model are combined with two acoustic models to estimate sound speed with distance across the New Jersey continental shelf and with depth below the seabed. Model predictions are compared to two independent sets of data: 1) Surficial sound speeds obtained through direct measurement using in situ compressional wave probes, and 2) sound speed as a function of depth obtained through inversion of seabed reflection measurements. In water depths less than 100 m, the model predictions produce a trend of decreasing grain-size and sound speed with increasing water depth as similarly observed in the measured surficial data. In water depths between 100 and 130 m, the model predictions exhibit an increase in sound speed that was not observed in the measured surficial data. A closer comparison indicates that the grain-sizes predicted for the surficial sediments are generally too small producing sound speeds that are too slow. The predicted sound speeds also tend to be too slow for sediments 0.5-20 m below the seabed in water depths greater than 100 m. However, in water depths less than 100 m, the sound speeds between 0.5-20-m subbottom depth are generally too fast. There are several reasons for the discrepancies including the stratigraphic model was limited to two dimensions, the model was unable to simulate biologic processes responsible for the high sound-speed shell material common in the model area, and incomplete geological records necessary to accurately predict grain-size

Estimating bottom properties with a vector sensor array during MakaiEx 2005

Nowadays, vector sensors which measure both acoustic pressure and particle velocity begin to be available in underwater acoustic systems, normally configured as vector sensor arrays (VSA). The spatial filtering capabilities of a VSA can be used, with advantage over traditional pressure only hydrophone arrays, for estimating acoustic field directionality as well as arrival times and spectral content, which could open up the possibility for its use in bottom properties' estimation. An additional motivation for this work is to test the possibility of using high frequency probe signals (say above 2 kHz) for reducing size and cost of actual sub bottom profilers and current geoacoustic inversion methods. This work studies the bottom related structure of the VSA acquired signals, regarding the emitted signal waveform, frequency band and source-receiver geometry in order to estimate bottom properties, specially bottom reflection coefficient characteristics. Such a system was used during the Makai 2005 experiment, off Kauai I., Hawai (USA) to receive precoded signals in a broad frequency band from 8 up to 14 kHz. The agreement between the observed and the modelled acoustic data is discussed and preliminary results on the bottom reflection estimation are presented.

Gridded bathymetry from multibeam echosounder HS-DS2 data of the cruise M52/1 (2002)

Bathymetry based on data recorded during M52-1 between 02.01.2002 and 01.02.2002 in the Black Sea. The cruise was focused on studying the distribution, structure and architecture of gas hydrate deposits in the Black Sea as well as their relationship to fluid migration pathways. While high-resolution geoacoustic investigation tools covering a whole range of frequencies and techniques render detailed images of near-surface gas hydrates and associated fluid migration pathways.

(Table 1) Physical properties of sediments at DSDP Holes 79-545 and 79-547A

Laboratory measurements of the acoustic and physical properties of deep-sea sediments and rocks are important for the interpretation of seismic reflection and refraction data and estimation of in situ physical property values. Furthermore, the results of such measurements can be used to design geoacoustic models of the upper oceanic crust that can relate the physical properties of deep-sea sediments to lithology, depth of burial, and diagenetic effects (Hamilton, 1980; Milholland et al., 1980). The purpose of this paper is to report the results of laboratory measurements of wet-bulk density, compressionalwave velocity, and velocity anisotropy on sediments cored during DSDP Leg 79. The sample suite consists of 11 calcareous claystones and clay-rich chalks recovered between 370 to 720 m sub-bottom at Holes 545 and 547A.

(Table 1) Age determination of ODP Leg 166 holes

Thick, late Quaternary sediment sections were recovered at several sites on the leeward slope of Great Bahama Bank during Leg 166 of the Ocean Drilling Program. These sections have paleoceanographic records with potentially high temporal resolution. To make an initial assessment of the records corresponding to the Holocene highstand of sea level, we have identified and dated the sediments from the four upper slope sites (1004, 1005, 1008, and 1009) that were deposited during the period of time which spans the last glaciation through the Holocene. Age identifications are based upon the abundances of the Globorotalia menardii complex of planktonic foraminifera, the stable oxygen isotopic ratios of bulk sediment and the planktonic foraminifera Globogerinoides ruber, and AMS C-14 dating of bulk sediment. Comparison of these data with the sediment lithologic and geoacoustic properties shows that consistent stratigraphic relationships exist at each site: The uppermost interval of aragonite-rich sediments corresponds to the Holocene highstand of sea level (i.e. oxygen isotope stage 1) and these sediments are underlain by a relatively thin interval of aragonite-poor, partially lithified sediments which corresponds to the last glaciation when sea level was significantly lower than today (i.e. oxygen isotope stages 2-4). The Leg 166 upper slope sites possess carbonate accumulation and paleoceanographic proxy records with very high temporal resolution, with Sites 1004, 1008, and 1009 appearing to have the greatest stratigraphic integrity. Comparison of core and high-resolution seismic profile data establishes the Holocene nature of the uppermost seismic unit in the stratigraphic package of the western slope of Great Bahama Bank.