Newly Automated System For Integrated Assessment Of The Conditions Of Underwater Gas Pipelines

An underwater gas pipeline is the portion of the pipeline that crosses a river beneath its bottom. Underwater gas pipelines are subject to increasing dangers as time goes by. An accident at an underwater gas pipeline can lead to technological and environmental disaster on the scale of an entire region. Therefore, timely troubleshooting of all underwater gas pipelines in order to prevent any potential accidents will remain a pressing task for the industry. The most important aspect of resolving this challenge is the quality of the automated system in question. Now the industry doesn't have any automated system that fully meets the needs of the experts working in the field maintaining underwater gas pipelines. Principle Aim of this Research: This work aims to develop a new system of automated monitoring which would simplify the process of evaluating the technical condition and decision making on planning and preventive maintenance and repair work on the underwater gas pipeline. Objectives: Creation a shared model for a new, automated system via IDEF3; Development of a new database system which would store all information about underwater gas pipelines; Development a new application that works with database servers, and provides an explanation of the results obtained from the server; Calculation of the values MTBF for specified pipelines based on quantitative data obtained from tests of this system. Conclusion: The new, automated system PodvodGazExpert has been developed for timely and qualitative determination of the physical conditions of underwater gas pipeline; The basis of the mathematical analysis of this new, automated system uses principal component analysis method; The process of determining the physical condition of an underwater gas pipeline with this new, automated system increases the MTBF by a factor of 8.18 above the existing system used today in the industry.

Risk-based maintenance model for offshore oil and gas pipelines:a case study

Offshore oil and gas pipelines are vulnerable to environment as any leak and burst in pipelines cause oil/gas spill resulting in huge negative Impacts on marine lives. Breakdown maintenance of these pipelines is also cost-intensive and time-consuming resulting in huge tangible and intangible loss to the pipeline operators. Pipelines health monitoring and integrity analysis have been researched a lot for successful pipeline operations and risk-based maintenance model is one of the outcomes of those researches. This study develops a risk-based maintenance model using a combined multiple-criteria decision-making and weight method for offshore oil and gas pipelines in Thailand with the active participation of experienced executives. The model's effectiveness has been demonstrated through real life application on oil and gas pipelines in the Gulf of Thailand. Practical implications. Risk-based inspection and maintenance methodology is particularly important for oil pipelines system, as any failure in the system will not only affect productivity negatively but also has tremendous negative environmental impact. The proposed model helps the pipelines operators to analyze the health of pipelines dynamically, to select specific inspection and maintenance method for specific section in line with its probability and severity of failure.

Assessment of the Performance of Acoustic and Mass Balance Methods for Leak Detection in Pipelines for Transporting Liquids

On-line leak detection is a main concern for the safe operation of pipelines. Acoustic and mass balance are the most important and extensively applied technologies in field problems. The objective of this work is to compare these leak detection methods with respect to a given reference situation, i.e., the same pipeline and monitoring signals acquired at the inlet and outlet ends. Experimental tests were conducted in a 749 m long laboratory pipeline transporting water as the working fluid. The instrumentation included pressure transducers and electromagnetic flowmeters. Leaks were simulated by opening solenoid valves placed at known positions and previously calibrated to produce known average leak flow rates. Results have clearly shown the limitations and advantages of each method. It is also quite clear that acoustics and mass balance technologies are, in fact, complementary. In general, an acoustic leak detection system sends out an alarm more rapidly and locates the leak more precisely, provided that the rupture of the pipeline occurs abruptly enough. On the other hand, a mass balance leak detection method is capable of quantifying the leak flow rate very accurately and of detecting progressive leaks.

Digital radiography for the inspection of weld seams of pipelines - better sensitivity

Conventional radiography, using industrial radiographic films, has its days numbered. Digital radiography, recently, has taken its place in various segments of products and services, such as medicine, aerospace, security, automotive, etc. As well as the technological trend, the digital technique has brought proven benefits in terms of productivity, sensitivity, the environment, tools for image treatment, cost reductions, etc. If the weld to be inspected is on a serried product, such as, for example, a pipe, the best option for the use of digital radiography is the plane detector, since its use can reduce the length of the inspection cycle due to its high degree of automation. This work tested welded joints produced with the submerged arc process, which were specially prepared in such a way that it shows small artificial cracks, which served as the basis forcomparing the sensitivity levels of the techniques involved. After carrying out the various experiments, the digital meth odshowed the highest sensitivity for the image quality indicator (IQI) of the wire and also in terms of detecting small discontinuities, indicating that the use of digital radiography using the plane detector had advantages over the conventional technique (Moreira et al. Digital radiography, the use of plane detectors for the inspection of welds in oil pipes and gas pipes.9th COTEQ and XXV National Testing Congress for Non Destructive Testing and Inspection; Salvador, Bahia, Brazil and Bavendiek et al. New digital radiography procedure exceeds film sensitivity considerably in aerospace applications. ECNDT; 2006; Berlin). The works were carried out on the basis of the specifications for oil and gas pipelines, API 5L 2004 edition (American Petroleum Institute. API 5L: specification for line pipe. 4th ed. p. 155; 2004) and ISO 3183 2007 edition (International Organization for Standardization, ISO 3183. Petroleum and gas industries - steel pipes for pi pelines transportation systems. p. 143; 2007). © 2010 Taylor & Francis.

Security of Russian gas supplies to the EU - the question of infrastrucutral connections. OSW Point of View, February 2005

The energy security of countries importing energy resources depends largely on the shape and quality of operational transport connections. This is particularly important in the case of natural gas supplies. Natural gas is transported mostly by gas pipelines which permanently connect gas producers and consumers. Thus Europe as a consumer is "tied" to certain gas suppliers for anywhere between a dozen and several tens of years. As their own resources are becoming depleted, the EU Member States get increasingly dependent on import of natural gas. The present paper discusses the existing and projected gas transport routes from Russia to the EU. The first part deals with the importance of gas exports to the economy of the Russian Federation, and the second delves into the EU Member States' dependence on gas imports. Then this paper examines the differences in perceiving the energy security issue between the old and the new Member States, those differences stemming from the different degrees of their dependence on Russian supplies. In the third part, two new transport route projects for Russian gas supplies to the EU are compared and it is argued that from the point of view of the Community's interests, the Yamal gas pipeline is a better solution than the North European (Trans-Baltic) gas pipeline.

Eastchester project, Iroquois Gas Transmission System. L.P. : environmental impact statement.

F also available in microfiche.

Official file of comments received on Alaska Natural Gas Transportation System draft environmental impact statement.

Comments received by U.S. EIS Task force.

Comments on the "Decision and report to Congress on the Alaska natural gas transportation system" issued by the President, September 22, 1977 /

Cover title

Pipeline accident report : Exxon Gas System, Inc., natural gas explosion and fire, Robstown, Texas, December 7, 1976.

Report date: Oct. 13, 1977.

Report of the ICC staff : investigation with recommendations, accident in the River West area, January 17, 1992, Chicago, Illinois : the Peoples Gas Light and Coke Company.

"June 1993."

Alaska natural gas transportation system final environmental impact statement--alternatives.

Cover title.

Alaska natural gas transportation system final environmental impact statement--glossary.

Cover title.

Ground cracking and frost heaving associated with chilled gas pipeline operations in Britain

This thesis investigates the soil-pipeline interactions associated with the operation of large-diameter chilled gas pipelines in Britain, these are frost/pipe heave and ground cracking. The investigation was biased towards the definition of the mechanism of ground cracking and, the parameters which influence its generation and subsequent development, especially its interaction with frost heave. The study involved a literature review, questionnaire, large-scale test and small-scale laboratory model experiments. The literature review concentrated on soil-pipeline interactions and frost action, with frost/pipe heave often reported but ground cracking was seldom reported. A questionnaire was circulated within British Gas to gain further information on these interactions. The replies indicated that if frost/pipe heave was reported, ground cracking was also likely to be observed. These soil-pipeline interactions were recorded along 19% of pipelines in the survey and were more likely along the larger diameter, higher flow pipelines. A large-scale trial along a 900 mm pipeline was undertaken to assess the soil thermal, hydraulic and stress regimes, together with pipe and ground movements. Results indicated that cracking occurred intermittently along the pipeline during periods of rapid frost/pipe heave and ground movement and, that frozen annulus growth produced a ground surface profile was approximated by a normal probability distribution curve. This curve indicates maximum tensile strain directly over the pipe centre. Finally a small-scale laboratory model was operated to further define the ground cracking mechanism. Ground cracking was observed at small upward ground surface movement, and with continued movement the ground crack increased in width and depth. At the end of the experiments internal soil failure planes slanting upwards and away from the frozen annulus were noted. The suggested mechanism for ground cracking involved frozen annulus growth producing tensile strain in the overlying unfrozen soil, which when sufficient produced a crack.

Towards novel biogas upgrading processes

Biogas production has considerable development possibilities not only in Finland but all over the world since it is the easiest way of creating value out of various waste fractions and represents an alternative source of renewable energy. Development of efficient biogas upgrading technology has become an important issue since it improves the quality of biogas and for example facilitating its injection into the natural gas pipelines. Moreover, such upgrading contributes to resolving the issue of increasing CO2 emissions and addresses the increasing climate change concerns. Together with traditional CO2 capturing technologies a new class of recently emerged sorbents such as ionic liquids is claimed as promising media for gas separations. In this thesis, an extensive comparison of the performance of different solvents in terms of CO2 capture has been performed. The focus of the present study was on aqueous amine solutions and their mixtures, traditional ionic liquids, ‘switchable’ ionic liquids and poly(ionic liquid)s in order to reveal the best option for biogas upgrading. The CO2 capturing efficiency for the most promising solvents achieved values around 50 - 60 L CO2 / L absorbent. These values are superior to currently widely applied water wash biogas upgrading system. Regeneration of the solvent mixtures appeared to be challenging since the loss of initial efficiency upon CO2 release was in excess of 20 - 40 vol %, especially in the case of aqueous amine solutions. In contrast, some of the ionic liquids displayed reversible behavior. Thus, for selected “switchable” ionic and poly(ionic liquid)s the CO2 absorption/regeneration cycles were performed 3 - 4 times without any notable efficiency decrease. The viscosity issue, typical for ionic liquids upon CO2 saturation, was addressed and the information obtained was evaluated and related to the ionic interactions. The occurrence of volatile organic compounds (VOCs) before and after biogas upgrading was studied for biogas produced through anaerobic digestion of waste waters sludge. The ionic liquid [C4mim][OAc] demonstrated its feasibility as a promising scrubbing media and exhibited high efficiency in terms of the removal of VOCs. Upon application of this ionic liquid, the amount of identified VOCs was diminished by around 65 wt %, while the samples treated with the aqueous mixture of 15 wt % N-methyldiethanolamine with addition of 5 wt % piperazine resulted in 32 wt % reduction in the amounts of volatile organic compounds only.

Analyse géographique des investissements internationaux de la China National Petroleum Corporation

Ce mémoire propose une analyse de l’expansion internationale de la China National Petroleum Corporation (CNPC) et des impacts de cette expansion sur la sécurité énergétique de la Chine. Dans le cadre de cette recherche, l’approvisionnement énergétique d’un pays est jugé sécuritaire lorsqu’une quantité suffisante de ressources nécessaires pour combler sa demande en énergie sont présentes, disponibles et accessibles et que son approvisionnement en services énergétiques demeure fiable et abordable. La recherche comporte quatre volets. Le premier volet porte sur les étapes de la restructuration de l’industrie pétrolière chinoise depuis 1949. Celle-ci est analysée au travers des changements dans les modes de gestion des compagnies pétrolières nationales et dans leurs relations avec le gouvernement chinois. Le deuxième volet traite de la diversification et des nouvelles spécialisations de CNPC. Ces aspects sont étudiés dans le cadre d’une analyse du pourcentage de ses actifs dans chaque segment industriel (aval, intermédiaire et amont) obtenus grâce à ses rapports annuels. Le troisième volet aborde la répartition géographique des activités de la compagnie que l’on étudie à l’aide d’une analyse approfondie de près de 150 investissements, acquisitions et contrats réalisés à l’étranger entre 1992 et 2014. Le quatrième volet aborde les impacts des investissements à l’étranger de la compagnie sur la sécurité énergétique de la Chine. Ces impacts sont mesurés par l’entremise d’une analyse des flux pétroliers internationaux vers la Chine que l’on compare à la production de CNPC par pays. Ce mémoire permet de déterminer que l’expansion internationale de CNPC sert d’abord et avant tout les intérêts économiques de la compagnie. Ce sont surtout ses investissements dans la construction d’infrastructures de transport (oléoducs, gazoducs ainsi que les usines et terminaux de liquéfaction de gaz naturel liquéfié) qui apportent des bénéfices directs à la sécurité énergétique de la Chine. La contribution des investissements dans les autres secteurs est beaucoup moins systématique et dépend largement de la période au cours de laquelle ils ont été effectués.