Gap Analysis For Implementing Tqm In Seafood Exporting Firms

Gap analysis is a very useful tool for firms contemplating adoption of a new system. This paper envisages the use of the gap analysis tool as a precursor for Indian seafood exporting firms to adopt total quality management. Total quality management (TQM) is a management philosophy which strives to put quality at the forefront of all its decision-making, thereby satisfying customers. We therefore recommend that firms adopt the TQM system for better alignment of management goals. The gap analysis tool serves as a roadmap for TQM implementation, by showing the management where they actually are and where they want to be. The main gaps were found to be in the areas of usage of SPC tools (66.7%), benchmarking (65.6%), top management commitment (56.25%) and customer focus (48.1%).

Yield gap analysis and assessment of climate-induced yield trends of irrigated rice in selected provinces of the Philippines

This study describes a combined empirical/modeling approach to assess the possible impact of climate variability on rice production in the Philippines. We collated climate data of the last two decades (1985-2002) as well as yield statistics of six provinces of the Philippines, selected along a North-South gradient. Data from the climate information system of NASA were used as input parameters of the model ORYZA2000 to determine potential yields and, in the next steps, the yield gaps defined as the difference between potential and actual yields. Both simulated and actual yields of irrigated rice varied strongly between years. However, no climate-driven trends were apparent and the variability in actual yields showed no correlation with climatic parameters. The observed variation in simulated yields was attributable to seasonal variations in climate (dry/wet season) and to climatic differences between provinces and agro-ecological zones. The actual yield variation between provinces was not related to differences in the climatic yield potential but rather to soil and management factors. The resulting yield gap was largest in remote and infrastructurally disfavored provinces (low external input use) with a high production potential (high solar radiation and day-night temperature differences). In turn, the yield gap was lowest in central provinces with good market access but with a relatively low climatic yield potential. We conclude that neither long-term trends nor the variability of the climate can explain current rice yield trends and that agroecological, seasonal, and management effects are over-riding any possible climatic variations. On the other hand the lack of a climate-driven trend in the present situation may be superseded by ongoing climate change in the future.

A gap analysis of ornithological research in the brazilian state of Roraima

Neste artigo, o esforço de investigação ornitológica no estado de Roraima será investigado utilizando abordagens de análises de lacunas. Basicamente, apresentaremos uma síntese sobre todo o esforço ornitológico feito até o momento em Roraima, visando responder as seguintes questões: (a) quais os locais bem amostrados para aves? (b) quais são as lacunas geográficas de investigação? (c) em que estágio de descobertas está o inventário das espécies de aves em Roraima? (d) quais são os macro-hábitats prioritários para investigação? (e) quais os tipos de vegetação bem investigados e quais os que podem ser classificados como prioritários para investigação? Como resultados, detectamos Oitenta e duas localidades com algum tipo de informação ornitológica. Dentre essas, a Estação Ecológica de Maracá (442 sp), seguido pelo Parque Nacional do Viruá (420 sp), Colônia do Apiaú (320 sp), Mucajaí (267 sp), e Pacaráima (212 sp), são as cinco localidades com maior grau de conhecimento ornitológico dentro do estado. Nos últimos 20 anos apenas duas localidades ornitológicas em Roraima podem ser acrescidas à lista de sítios bem estudados de acordo com o critério de pelo menos 100 espécies registradas (peles, gravações de voz e observações visuais): Parque Nacional do Viruá e a Fazenda Paraense. Cinco áreas são aqui apontadas como lacunas de amostragem da avifauna de Roraima e devem receber prioridade para novos inventários e estudos sobre a avifauna dessa região, são elas: Noroeste do estado, nas áreas junto à fronteira com a Venezuela e divisa com o Estado do Amazonas; Baixo Rio Branco, desde a cidade de Caracaraí à sua foz; Florestas de terra firme no sudeste do Estado; As savanas do nordeste junto à fronteira com a Guiana e as regiões de floresta montana e os tepuis.

The Illinois Gap Analysis final report, 2006.

U.S. Geological Survey, Department of Interior Cooperative Agreement No. 14-48-0003-95-1090

Survey-gap analysis in expeditionary research: where do we go from here?

Research expeditions into remote areas to collect biological specimens provide vital information for understanding biodiversity. However, major expeditions to little-known areas are expensive and time consuming, time is short, and well-trained people are difficult to find. In addition, processing the collections and obtaining accurate identifications takes time and money. In order to get the maximum return for the investment, we need to determine the location of the collecting expeditions carefully. In this study we used environmental variables and information on existing collecting localities to help determine the sites of future expeditions. Results from other studies were used to aid in the selection of the environmental variables, including variables relating to temperature, rainfall, lithology and distance between sites. A survey gap analysis tool based on 'ED complementarity' was employed to select the sites that would most likely contribute the most new taxa. The tool does not evaluate how well collected a previously visited site survey site might be; however, collecting effort was estimated based on species accumulation curves. We used the number of collections and/or number of species at each collecting site to eliminate those we deemed poorly collected. Plants, birds, and insects from Guyana were examined using the survey gap analysis tool, and sites for future collecting expeditions were determined. The south-east section of Guyana had virtually no collecting information available. It has been inaccessible for many years for political reasons and as a result, eight of the first ten sites selected were in that area. In order to evaluate the remainder of the country, and because there are no immediate plans by the Government of Guyana to open that area to exploration, that section of the country was not included in the remainder of the study. The range of the ED complementarity values dropped sharply after the first ten sites were selected. For plants, the group for which we had the most records, areas selected included several localities in the Pakaraima Mountains, the border with the south-east, and one site in the north-west. For birds, a moderately collected group, the strongest need was in the north-west followed by the east. Insects had the smallest data set and the largest range of ED complementarity values; the results gave strong emphasis to the southern parts of the country, but most of the locations appeared to be equidistant from one another, most likely because of insufficient data. Results demonstrate that the use of a survey gap analysis tool designed to solve a locational problem using continuous environmental data can help maximize our resources for gathering new information on biodiversity. (c) 2005 The Linnean Society of London.

Mutual dependency grid for stakeholder mapping: a component-based approach to supply chain participant analysis

Stakeholder analysis plays a critical role in business analysis. However, the majority of the stakeholder identification and analysis methods focus on the activities and processes and ignore the artefacts being processed by human beings. By focusing on the outputs of the organisation, an artefact-centric view helps create a network of artefacts, and a component-based structure of the organisation and its supply chain participants. Since the relationship is based on the components, i.e. after the stakeholders are identified, the interdependency between stakeholders and the focal organisation can be measured. Each stakeholder is associated with two types of dependency, namely the stakeholder’s dependency on the focal organisation and the focal organisation’s dependency on the stakeholder. We identify three factors for each type of dependency and propose the equations that calculate the dependency indexes. Once both types of the dependency indexes are calculated, each stakeholder can be placed and categorised into one of the four groups, namely critical stakeholder, mutual benefits stakeholder, replaceable stakeholder, and easy care stakeholder. The mutual dependency grid and the dependency gap analysis, which further investigates the priority of each stakeholder by calculating the weighted dependency gap between the focal organisation and the stakeholder, subsequently help the focal organisation to better understand its stakeholders and manage its stakeholder relationships.

Acredita Portugal: How to improve the implementation rate of entrepreneurial projects?

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

A solution for estimates in software development projects

The Corporate world is becoming more and more competitive. This leads organisations to adapt to this reality, by adopting more efficient processes, which result in a decrease in cost as well as an increase of product quality. One of these processes consists in making proposals to clients, which necessarily include a cost estimation of the project. This estimation is the main focus of this project. In particular, one of the goals is to evaluate which estimation models fit the Altran Portugal software factory the most, the organization where the fieldwork of this thesis will be carried out. There is no broad agreement about which is the type of estimation model more suitable to be used in software projects. Concerning contexts where there is plenty of objective information available to be used as input to an estimation model, model-based methods usually yield better results than the expert judgment. However, what happens more frequently is not having this volume and quality of information, which has a negative impact in the model-based methods performance, favouring the usage of expert judgement. In practice, most organisations use expert judgment, making themselves dependent on the expert. A common problem found is that the performance of the expert’s estimation depends on his previous experience with identical projects. This means that when new types of projects arrive, the estimation will have an unpredictable accuracy. Moreover, different experts will make different estimates, based on their individual experience. As a result, the company will not directly attain a continuous growing knowledge about how the estimate should be carried. Estimation models depend on the input information collected from previous projects, the size of the project database and the resources available. Altran currently does not store the input information from previous projects in a systematic way. It has a small project database and a team of experts. Our work is targeted to companies that operate in similar contexts. We start by gathering information from the organisation in order to identify which estimation approaches can be applied considering the organization’s context. A gap analysis is used to understand what type of information the company would have to collect so that other approaches would become available. Based on our assessment, in our opinion, expert judgment is the most adequate approach for Altran Portugal, in the current context. We analysed past development and evolution projects from Altran Portugal and assessed their estimates. This resulted in the identification of common estimation deviations, errors, and patterns, which lead to the proposal of metrics to help estimators produce estimates leveraging past projects quantitative and qualitative information in a convenient way. This dissertation aims to contribute to more realistic estimates, by identifying shortcomings in the current estimation process and supporting the self-improvement of the process, by gathering as much relevant information as possible from each finished project.

Bats of Borneo: diversity, distributions and representation in protected areas

Protected areas are valuable in conserving tropical biodiversity, but an insufficient understanding of species diversity and distributions makes it difficult to evaluate their effectiveness. This is especially true on Borneo, a species rich island shared by three countries, and is particularly concerning for bats, a poorly known component of mammal diversity that may be highly susceptible to landscape changes. We reviewed the diversity, distributions and conservation status of 54 bat species to determine the representation of these taxa in Borneo's protected areas, and whether these reserves complement each other in terms of bat diversity. Lower and upper bound estimates of bat species composition were characterised in 23 protected areas and the proposed boundaries of the Heart of Borneo conservation area. We used lower and upper bound estimates of species composition. By using actual inventories, species representation was highly irregular, and even if some reserves were included in the Heart of Borneo, the protected area network would still exhibit low complementarity. By inferring species presence from distributions, composition between most reserves was similar, and complementarity was much higher. Predicting species richness using abundance information suggested that bat species representation in reserves may lie between these two extremes. We recommend that researchers better sample biodiversity over the island and address the conservation threats faced in Borneo both within and outside protected areas. While the Heart of Borneo Initiative is commendable, it should not divert attention from other conservation areas.

Representativeness of terrestrial ecosystems in Chile's protected area system

Because protected areas are a major means of conservation, the extent to which ecosystems are represented under different protection regimes needs to be ascertained. A gap analysis approach was used to assess the representativeness of Chile's terrestrial ecosystems in differing kinds of protected areas. Terrestrial ecosystems were described in terms of potential vegetation, employing three protection scenarios. Scenario 1 was based exclusively on the Chilean National System of Protected Wild Areas (SNASPE). Scenario 2 included all types of public protected areas, namely SNASPE, nature sanctuaries and Ministry of National Heritage lands. Scenario 3 included all items in Scenario 2, but also included private protected areas and biodiversity priority sites. There is insufficient protection of terrestrial ecosystems under the Scenario 2. In addition to the low level of ecosystem protection provided by state protected areas (only 42 of the 127 terrestrial ecosystems had >10% of their area protected), 23 terrestrial ecosystems were identified as having no protection at the national level. Gaps in protection were concentrated in the North (both coastal and inland desertic scrub), Central (thorny scrub, thorny forests, sclerophyllous forests and deciduous coastal forests) and Austral (steppe ecosystems) regions of Chile. These gaps include ecosystems that are of global conservation importance.

Modeling competencies and capabilities in knowledge intensive business environment

Tämän diplomityön päämääränä oli tutkia Perloksen teknologiaosaamisia. Perloksen tavoitteena on tulevaisuudessa yhdistää ja soveltaa uusia teknologioita ja älykkäitä materiaaleja muovimekaniikkaan.Ideana oli mallintaa Perloksen osaamisia ja osaamisgapeja ottaen huomioon heidän tulevaisuuden visionsa. Projektituotteena osaamisten mallintamisessa oli Perlos Healthcaren asiakkaan analysoiva mittauslaite. Tutkimuksen arvo on huomattava sillä tunnistamalla osaamisensa ja kyvykkyytensä yritys pystyy luomaan paremman tarjooman vastatessaan koko ajan kasvaviin asiakasvaatimuksiin. Tutkimus on osa TEKESin rahoittamaa LIIMA -projektia. Työn ensimmäisessä osassa esitellään osaamiseen ja partneroitumiseen liittyviä teorioita. Osaamisten mallintaminen tehtiin Excel -pohjaisella työkalulla. Se sisältää projektituotteeseen liittyen osaamisriippuvuuksien mallintamisen ja gap -analyysin. Yhtenä tutkimusmetodina käytettiin haastattelututkimusta. Työ ja sen tulokset antavat operatiivista hyötyä teknologioiden ja markkinoiden välisessä kentässä.

Toteutettavuustarkastelu toiminnanohjausjärjestelmäprojektissa

Työn tavoitteena oli suorittaa tekninen sekä toiminnallinen toteutettavuustarkastelu asiakasdataan kohdistuvien muutosten suhteen erään suuren metsäteollisuusyrityksen toiminnanohjausjärjestelmäprojektissa. Ensin selvitettiin toiminnanohjausjärjestelmän käsite, toteutettavuustarkastelun rooli IT -projektissa sekä toteutettavuustarkastelun suorittamisen vaiheet. Teoriaosuus koottiin pääasiassa kirjallisuuden ja internetlähteiden avulla.Empiirisessä osuudessa toteutettiin ja dokumentoitiin toteutettavuustarkastelu vaihe vaiheelta. Kohdetta lähestyttiin ylhäältä -alas menetelmällä. Pääpaino oli asiakaskoodien, järjestelmiin tarvittavien muutosten sekä työnkulun muuttamisen toteutettavuuden tarkastelussa. Empiirisen osuuden informaation kerääminen suoritettiin asiantuntijoiden haastattelujen avulla. Kerättyä tietoa sovellettiin teoriaosuuden sekä projektidokumenttien menetelmien mukaisesti. Lopputulokseksi saatiin täysivaltainen toteutettavuustarkastelu, joka pitää sisällään kohteen taustaselvitykset, nykyisen ja tulevan tilanteen kuvaukset, poikkeavuusanalyysit sekä jatkotoimenpide-ehdotukset. Tutkimuksessa päädyttiin siihen, että projekti on toteutettavissa tutkitulta alueelta.