Rôle du cortex pariétal postérieur dans le processus d'intégration visuomotrice - connexions anatomiques avec le cortex moteur et activité cellulaire lors de la locomotion chez le chat

La progression d’un individu au travers d’un environnement diversifié dépend des informations visuelles qui lui permettent d’évaluer la taille, la forme ou même la distance et le temps de contact avec les obstacles dans son chemin. Il peut ainsi planifier en avance les modifications nécessaires de son patron locomoteur afin d’éviter ou enjamber ces entraves. Ce concept est aussi applicable lorsque le sujet doit atteindre une cible, comme un prédateur tentant d’attraper sa proie en pleine course. Les structures neurales impliquées dans la genèse des modifications volontaires de mouvements locomoteurs ont été largement étudiées, mais relativement peu d’information est présentement disponible sur les processus intégrant l’information visuelle afin de planifier ces mouvements. De nombreux travaux chez le primate suggèrent que le cortex pariétal postérieur (CPP) semble jouer un rôle important dans la préparation et l’exécution de mouvements d’atteinte visuellement guidés. Dans cette thèse, nous avons investigué la proposition que le CPP participe similairement dans la planification et le contrôle de la locomotion sous guidage visuel chez le chat. Dans notre première étude, nous avons examiné l’étendue des connexions cortico-corticales entre le CPP et les aires motrices plus frontales, particulièrement le cortex moteur, à l’aide d’injections de traceurs fluorescents rétrogrades. Nous avons cartographié la surface du cortex moteur de chats anesthésiés afin d’identifier les représentations somatotopiques distales et proximales du membre antérieur dans la partie rostrale du cortex moteur, la représentation du membre antérieur située dans la partie caudale de l’aire motrice, et enfin la représentation du membre postérieur. L’injection de différents traceurs rétrogrades dans deux régions motrices sélectionnées par chat nous a permis de visualiser la densité des projections divergentes et convergentes pariétales, dirigées vers ces sites moteurs. Notre analyse a révélé une organisation topographique distincte de connexions du CPP avec toutes les régions motrices identifiées. En particulier, nous avons noté que la représentation caudale du membre antérieur reçoit majoritairement des projections du côté rostral du sillon pariétal, tandis que la partie caudale du CPP projette fortement vers la représentation rostrale du membre antérieur. Cette dernière observation est particulièrement intéressante, parce que le côté caudal du sillon pariétal reçoit de nombreux inputs visuels et sa cible principale, la région motrice rostrale, est bien connue pour être impliquée dans les fonctions motrices volontaires. Ainsi, cette étude anatomique suggère que le CPP, au travers de connexions étendues avec les différentes régions somatotopiques du cortex moteur, pourrait participer à l’élaboration d’un substrat neural idéal pour des processus tels que la coordination inter-membre, intra-membre et aussi la modulation de mouvements volontaires sous guidage visuel. Notre deuxième étude a testé l’hypothèse que le CPP participe dans la modulation et la planification de la locomotion visuellement guidée chez le chat. En nous référant à la cartographie corticale obtenue dans nos travaux anatomiques, nous avons enregistré l’activité de neurones pariétaux, situés dans les portions des aires 5a et 5b qui ont de fortes connexions avec les régions motrices impliquées dans les mouvements de la patte antérieure. Ces enregistrements ont été effectués pendant une tâche de locomotion qui requiert l’enjambement d’obstacles de différentes tailles. En dissociant la vitesse des obstacles de celle du tapis sur lequel le chat marche, notre protocole expérimental nous a aussi permit de mettre plus d’emphase sur l’importance de l’information visuelle et de la séparer de l’influx proprioceptif généré pendant la locomotion. Nos enregistrements ont révélé deux groupes de cellules pariétales activées en relation avec l’enjambement de l’obstacle: une population, principalement située dans l’aire 5a, qui décharge seulement pendant le passage du membre au dessus del’entrave (cellules spécifiques au mouvement) et une autre, surtout localisée dans l’aire 5b, qui est activée au moins un cycle de marche avant l’enjambement (cellules anticipatrices). De plus, nous avons observé que l’activité de ces groupes neuronaux, particulièrement les cellules anticipatrices, était amplifiée lorsque la vitesse des obstacles était dissociée de celle du tapis roulant, démontrant l’importance grandissante de la vision lorsque la tâche devient plus difficile. Enfin, un grand nombre des cellules activées spécifiquement pendant l’enjambement démontraient une corrélation soutenue de leur activité avec le membre controlatéral, même s’il ne menait pas dans le mouvement (cellules unilatérales). Inversement, nous avons noté que la majorité des cellules anticipatrices avaient plutôt tendance à maintenir leur décharge en phase avec l’activité musculaire du premier membre à enjamber l’obstacle, indépendamment de sa position par rapport au site d’enregistrement (cellules bilatérales). Nous suggérons que cette disparité additionnelle démontre une fonction diversifiée de l’activité du CPP. Par exemple, les cellules unilatérales pourraient moduler le mouvement du membre controlatéral au-dessus de l’obstacle, qu’il mène ou suive dans l’ordre d’enjambement, tandis que les neurones bilatéraux sembleraient plutôt spécifier le type de mouvement volontaire requis pour éviter l’entrave. Ensembles, nos observations indiquent que le CPP a le potentiel de moduler l’activité des centres moteurs au travers de réseaux corticaux étendus et contribue à différents aspects de la locomotion sous guidage visuel, notamment l’initiation et l’ajustement de mouvements volontaires des membres antérieurs, mais aussi la planification de ces actions afin d’adapter la progression de l’individu au travers d’un environnement complexe.

Contribution du globus pallidus lors de la locomotion sous guidage visuel.

Les nombreuses études cliniques sur les maladies affectant les noyaux gris centraux (NGC) ont montré l’importance des déficits moteurs engendrés par un dysfonctionnement de ces structures. La locomotion est particulièrement affectée chez ces patients, ce qui suggère un rôle important des NGC dans le contrôle de celle-ci. En revanche, très peu d’études fondamentales ont enregistré l’activité des neurones des NGC durant la locomotion chez des modèles intacts. Le globus pallidus, en tant qu’une des principales structures de sortie des NGC, constitue une cible idéale pour étudier le signal transmis par les NGC au thalamus et au tronc cérébral. L’objectif de notre étude est de mieux comprendre la contribution que joue le segment externe du globus pallidus (GPe) dans le contrôle de la locomotion sous guidage visuel. Cette étude constitue le premier rapport d’enregistrements de l’activité des neurones du GPe lors de modifications volontaires de la marche sous guidage visuel. Notre hypothèse générale est que le GPe contribue au contrôle de la locomotion, et particulièrement lors des modifications de la marche. Nous avons enregistré l’activité des neurones du GPe de chats au repos, puis marchant sur un tapis et enjambant des obstacles. Nos résultats ont révélé que la plupart des cellules montraient peu de changements lors de la locomotion non-obstruée par rapport au repos. En revanche, la moitié des neurones enregistrés présentaient une modulation significative de leur décharge durant l’enjambement de l’obstacle. Nous avons observé une majorité de ces cellules qui diminuaient leur fréquence et un tiers de neurones qui l’augmentaient pendant le pas modifié, suggérant que le GPe exerce sur le mouvement un contrôle dépendant du contexte, permettant sélectivement l’augmentation ou la diminution de l’activité motrice. De plus, presque toutes les cellules déchargeaient durant la totalité de la phase de balancement du membre antérieur controlatéral, ce qui semble indiquer une contribution du GPe dans le timing et la durée de cette phase. Finalement, la moitié des neurones présentaient un changement réciproque entre la condition de lead et la condition de trail. Ce résultat suggère que le GPe participerait à la sélection d’action du membre lors des modifications de la marche. Nos résultats illustrent la complexité de l’activité du GPe lors de la locomotion sous guidage visuel et ils sont compatibles avec une contribution plus générale au mouvement que celle exercée par le cortex moteur.

Reduced knee flexion is a possible cause of increased loading rates in individuals with patellofemoral pain

Stair ascent is an activity that exacerbates symptoms of individuals with patellofemoral pain. The discomfort associated with this activity usually results in gait modification such as reduced knee flexion in an attempt to reduce pain. Although such compensatory strategy is a logical approach to decrease pain, it also reduces the normal active shock absorption increasing loading rates and may lead to deleterious and degenerative changes of the knee joint. Thus, the aims of this study were (i) to investigate whether there is reduced knee flexion in adults with PFP compared to healthy controls; and (ii) to analyze loading rates in these subjects, during stair climbing. Twenty-nine individuals with patellofemoral pain and twenty-five control individuals (18-30years) participated in this study. Each subject underwent three-dimensional kinematic and kinetic analyses during stair climbing on two separate days. Between-groups analyses of variance were performed to identify differences in peak knee flexion and loading rates. Intraclass correlation coefficient was performed to verify the reliability of the variables. On both days, the patellofemoral pain group demonstrated significantly reduced peak knee flexion and increased loading rates. In addition, the two variables obtained high to very high reliability. Reduced knee flexion during stair climbing as a strategy to avoid anterior knee pain does not seem to be healthy for lower limb mechanical distributions. Repeated loading at higher loading rates may be damaging to lower limb joints.

Load during prosthetic gait : is direct measurement better than inverse dynamics?

The knee forces and moments estimated by inverse dynamics and directly measured by a multiaxial transducer were compared during the gait of a transfemoral amputee. The estimated and directly measured forces and moments were relatively close. However, 3D inverse dynamics estimated only partially the forces and moments associated with the deformation of the prosthetic foot and locking of knee mechanism.

Effect of inaccuracies in anthropometric data and linked-segment inverse dynamic modeling on kinetics of gait in persons with partial foot amputation

The accuracy of data derived from linked-segment models depends on how well the system has been represented. Previous investigations describing the gait of persons with partial foot amputation did not account for the unique anthropometry of the residuum or the inclusion of a prosthesis and footwear in the model and, as such, are likely to have underestimated the magnitude of the peak joint moments and powers. This investigation determined the effect of inaccuracies in the anthropometric input data on the kinetics of gait. Toward this end, a geometric model was developed and validated to estimate body segment parameters of various intact and partial feet. These data were then incorporated into customized linked-segment models, and the kinetic data were compared with that obtained from conventional models. Results indicate that accurate modeling increased the magnitude of the peak hip and knee joint moments and powers during terminal swing. Conventional inverse dynamic models are sufficiently accurate for research questions relating to stance phase. More accurate models that account for the anthropometry of the residuum, prosthesis, and footwear better reflect the work of the hip extensors and knee flexors to decelerate the limb during terminal swing phase.

Functional outcome of transfemoral amputees fitted with an osseointegrated fixation : temporal gait characteristics

The purpose of this study was to characterise the functional outcome of 12 transfemoral amputees fitted with osseointegrated fixation using temporal gait characteristics. The objectives were (A) to present the cadence, duration of gait cycle, support and swing phases with an emphasis on the stride-to-stride and participant-to-participant variability, and (B) to compare these temporal variables with normative data extracted from the literature focusing on transfemoral amputees fitted with a socket and able-bodied participants. The temporal variables were extracted from the load applied on the residuum during straight level walking, which was collected at 200 Hz by a transducer. A total of 613 strides were assessed. The cadence (46±4 strides/min), the duration of the gait cycle (1.29±0.11 s), support (0.73±0.07 s, 57±3% of CG) and swing (0.56±0.07 s, 43±3% of GC) phases of the participants were 2% quicker, 3%, 6% shorter and 1% longer than transfemoral amputees using a socket as well as 11% slower, 9%, 6% and 13% longer than able-bodied, respectively. All combined, the results indicated that the fitting of an osseointegrated fixation has enabled this group of amputees to restore their locomotion with a highly functional level. Further longitudinal and cross-sectional studies would be required to confirm these outcomes. Nonetheless, the data presented can be used as benchmark for future comparisons. It can also be used as input in generic algorithms using templates of patterns of loading to recognise activities of daily living and to detect falls.

Bioactive mesopore-glass microspheres with controllable protein-delivery properties by biomimetic surface modification

Microsphere systems with the ideal properties for bone regeneration need to be bioactive, and at the same time possess the capacity for controlled protein/drug-delivery; however, the current crop of microsphere system fails to fulfill these properties. The aim of this study was to develop a novel protein-delivery system of bioactive mesoporous glass (MBG) microspheres by a biomimetic method through controlling the density of apatite on the surface of microspheres, for potential bone tissue regeneration. MBG microspheres were prepared by using the method of alginate cross-linking with Ca2+ ions. The cellular bioactivity of MBG microspheres was evaluated by investigating the proliferation and attachment of bone marrow stromal cell (BMSC). The loading efficiency and release kinetics of bovine serum albumin (BSA) on MBG microspheres were investigated after coprecipitating with biomimetic apatite in simulated body fluids (SBF). The results showed that MBG microspheres supported BMSC attachment and the Si containing ionic products from MBG microspheres stimulated BMSCs proliferation. The density of apatite on MBG microspheres increased with the length of soaking time in SBF. BSA-loading efficiency of MBG was significantly enhanced by co-precipitating with apatite. Furthermore, the loading efficiency and release kinetics of BSA could be controlled by controlling the density of apatite formed on MBG microspheres. Our results suggest that MBG microspheres are a promising protein-delivery system as a filling material for bone defect healing and regeneration.

Body size and walking cadence affect lower extremity joint power in children's gait

Obese children move less and with greater difficulty than normal-weight counterparts but expend comparable energy. Increased metabolic costs have been attributed to poor biomechanics but few studies have investigated the influence of obesity on mechanical demands of gait. This study sought to assess three-dimensional lower extremity joint powers in two walking cadences in 28 obese and normal-weight children. 3D-motion analysis was conducted for five trials of barefoot walking at self-selected and 30% greater than self-selected cadences. Mechanical power was calculated at the hip, knee, and ankle in sagittal, frontal and transverse planes. Significant group differences were seen for all power phases in the sagittal plane, hip and knee power at weight acceptance and hip power at propulsion in the frontal plane, and knee power during mid-stance in the transverse plane. After adjusting for body weight, group differences existed in hip and knee power phases at weight acceptance in sagittal and frontal planes, respectively. Differences in cadence existed for all hip joint powers in the sagittal plane and frontal plane hip power at propulsion. Frontal plane knee power at weight acceptance and sagittal plane knee power at propulsion were significantly different between cadences. Larger joint powers in obese children contribute to difficulty performing locomotor tasks, potentially decreasing motivation to exercise.

Distributed control of gait for a humanoid robot

This paper describes a walking gait for a humanoid robot with a distributed control system. The motion for the robot is calculated in real time on a central controller, and sent over CAN bus to the distributed control system. The distributed control system loosely follows the motion patterns from the central controller, while also acting to maintain stability and balance. There is no global feedback control system; the system maintains its balance by the interaction between central gait and soft control of the actuators. The paper illustrates a straight line walking gait and shows the interaction between gait generation and the control system. The analysis of the data shows that successful walking can be achieved without maintaining strict local joint control, and without explicit global balance coordination.

Family-focused weight management program for five- to nine-year-olds incorporating parenting skills training with healthy lifestyle information to support behaviour modification

his case study aims to describe how general parenting principles can be used as part of parent-led, family-focused child weight management that is in line with current Australian Clinical Practice Guidelines. A parent-led, family-focused child weight management program was designed for use by dietitians with parents of young children (five- to nine-year-olds). The program utilises the cornerstones of overweight treatment: diet, activity, behaviour modification and family support delivered in an age-appropriate, family-focused manner. Parents participate in 16 sessions (4 parenting-focused, 8 lifestyle-focused and 4 individual telephone support calls) conducted weekly, fortnightly then monthly over six months. This case study illustrates how a family used the program, resulting in reduced degree of overweight and stabilised waist circumference in the child over 12 months. In conclusion, linking parenting skills to healthy family lifestyle education provides an innovative approach to family-focused child weight management. It addresses key Australian Clinical Practice Guidelines, works at the family level, and provides a means for dietitians to easily adopt age-appropriate behaviour modification as part of their practice.

Evolving a locus based gait for a humanoid robot

This paper describes a process for evolving a stable humanoid walking gait that is based around parameterised loci of motion. The parameters of the loci are chosen by an evolutionary process based on the criteria that the robot's ZMP (zero moment point) follows a desirable path. The paper illustrates the evolution of a straight line walking gait. The gait has been tested on a 1.2 m tall humanoid robot (GuRoo). The results, apart form illustrating a successful walk, illustrate the effectiveness of the ZMP path criterion in not only ensuring a stable walk, but also in achieving efficient use of the actuators.

Development of accident modification factors on intersection crash maneuvers

In order to estimate the safety impact of roadway interventions engineers need to collect, analyze, and interpret the results of carefully implemented data collection efforts. The intent of these studies is to develop Accident Modification Factors (AMF's), which are used to predict the safety impact of various road safety features at other locations or in upon future enhancements. Models are typically estimated to estimate AMF's for total crashes, but can and should be estimated for crash outcomes as well. This paper first describes data collected with the intent estimate AMF's for rural intersections in the state of Georgia within the United Sates. Modeling results of crash prediction models for the crash outcomes: angle, head-on, rear-end, sideswipe (same direction and opposite direction) and pedestrian-involved crashes are then presented and discussed. The analysis reveals that factors such as the Annual Average Daily Traffic (AADT), the presence of turning lanes, and the number of driveways have a positive association with each type of crash, while the median width and the presence of lighting are negatively associated with crashes. The model covariates are related to crash outcome in different ways, suggesting that crash outcomes are associated with different pre-crash conditions.

Modification and validation of a microwave-assisted digestion method for subsequent ICP-MS determination of selected heavy metals in sediment and fish samples in Agusan River, Philippines

This study investigated, validated, and applied the optimum conditions for a modified microwave assisted digestion method for subsequent ICP-MS determination of mercury, cadmium, and lead in two matrices relevant to water quality, that is, sediment and fish. Three different combinations of power, pressure, and time conditions for microwave-assisted digestion were tested, using two certified reference materials representing the two matrices, to determine the optimum set of conditions. Validation of the optimized method indicated better recovery of the studied metals compared to standard methods. The validated method was applied to sediment and fish samples collected from Agusan River and one of its tributaries, located in Eastern Mindanao, Philippines. The metal concentrations in sediment ranged from 2.85 to 341.06 mg/kg for Hg, 0.05 to 44.46 mg/kg for Cd and 2.20 to 1256.16 mg/kg for Pb. The results indicate that the concentrations of these metals in the sediments rapidly decrease with distance downstream from sites of contamination. In the selected fish species, the metals were detected but at levels that are considered safe for human consumption, with concentrations of 2.14 to 6.82 μg/kg for Hg, 0.035 to 0.068 μg/kg for Cd, and 0.019 to 0.529 μg/kg for Pb.