Identificação de fendilhamento de pavimentos e propriedades volumétricas das misturas betuminosas utilizando um Georadar

Dissertação de mestrado integrado em Engenharia Civil

Evaluation of the reconstruction limits of a frequency-independent crosshole georadar waveform inversion scheme in the presence of dispersion

Waveform tomographic imaging of crosshole georadar data is a powerful method to investigate the shallow subsurface because of its ability to provide images of pertinent petrophysical parameters with extremely high spatial resolution. All current crosshole georadar waveform inversion strategies are based on the assumption of frequency-independent electromagnetic constitutive parameters. However, in reality, these parameters are known to be frequency-dependent and complex and thus recorded georadar data may show significant dispersive behavior. In this paper, we evaluate synthetically the reconstruction limits of a recently published crosshole georadar waveform inversion scheme in the presence of varying degrees of dielectric dispersion. Our results indicate that, when combined with a source wavelet estimation procedure that provides a means of partially accounting for the frequency-dependent effects through an "effective" wavelet, the inversion algorithm performs remarkably well in weakly to moderately dispersive environments and has the ability to provide adequate tomographic reconstructions.

Enhancing the vertical resolution of surface georadar data

There are far-reaching conceptual similarities between bi-static surface georadar and post-stack, "zero-offset" seismic reflection data, which is expressed in largely identical processing flows. One important difference is, however, that standard deconvolution algorithms routinely used to enhance the vertical resolution of seismic data are notoriously problematic or even detrimental to the overall signal quality when applied to surface georadar data. We have explored various options for alleviating this problem and have tested them on a geologically well-constrained surface georadar dataset. Standard stochastic and direct deterministic deconvolution approaches proved to be largely unsatisfactory. While least-squares-type deterministic deconvolution showed some promise, the inherent uncertainties involved in estimating the source wavelet introduced some artificial "ringiness". In contrast, we found spectral balancing approaches to be effective, practical and robust means for enhancing the vertical resolution of surface georadar data, particularly, but not exclusively, in the uppermost part of the georadar section, which is notoriously plagued by the interference of the direct air- and groundwaves. For the data considered in this study, it can be argued that band-limited spectral blueing may provide somewhat better results than standard band-limited spectral whitening, particularly in the uppermost part of the section affected by the interference of the air- and groundwaves. Interestingly, this finding is consistent with the fact that the amplitude spectrum resulting from least-squares-type deterministic deconvolution is characterized by a systematic enhancement of higher frequencies at the expense of lower frequencies and hence is blue rather than white. It is also consistent with increasing evidence that spectral "blueness" is a seemingly universal, albeit enigmatic, property of the distribution of reflection coefficients in the Earth. Our results therefore indicate that spectral balancing techniques in general and spectral blueing in particular represent simple, yet effective means of enhancing the vertical resolution of surface georadar data and, in many cases, could turn out to be a preferable alternative to standard deconvolution approaches.

Estudi amb georadar del jaciment arqueològic de Lady Field (Woolston Manor Farm, Somerset, Gran Bretanya)

Projecte de recerca elaborat a partir d’una estada al University of Bristol, Gran Bretanya, durant agost i setembre del 2007. Els objectius del projecte d’estudi del jaciment de Lady Field (Woolston Manor Farm, Somerset, Gran Bretanya) eren, bàsicament, tres: en primer lloc, posar en pràctica els coneixements teòrics assolits durant la formació en prospecció geofísica; en segon lloc, aportar informació complementària a la aportada per la prospecció tradicional i el sondeig amb gradiòmetre magnètic efectuades prèviament per l’equip investigador del centre, arribant a definir millor les estructures poc definides per l’altre sistema i, finalment, obtenir un cas d’estudi sobre un jaciment medieval a Gran Bretanya, on les condicions geològiques i climàtiques, que afecten els resultats de la prospecció, són diferents a les del nostre país. Aquests objectius s’han assolit, ja que s’ha pogut portar a terme una prospecció de camp amb el sistema de georadar, processar les dades i obtenir-ne dades de qualitat i obtenir informació útil i rellevant de cara a la definició de les restes detectades, una vegada feta la interpretació. Els resultats mostren l’aparició en el subsòl del jaciment de quatre possibles fases d’ocupació, entre les que destaquen un moment amb possibles restes d’una antiga xarxa urbana, treballs agrícoles o un sistema de drenatge del terreny. Finalment l’estudi ha pogut constatar que la prospecció amb GPR en aquestes condicions geològiques és possible, tot i que les climàtiques –essencialment la pluja i la humitat del sòl- suposen complicacions a l’hora d’adquirir dades de forma segura per la maquinària i per la qualitat de les dades.

Source wavelet estimation for waveform inversion of crosshole georadar data

AbstractFor a wide range of environmental, hydrological, and engineering applications there is a fast growing need for high-resolution imaging. In this context, waveform tomographic imaging of crosshole georadar data is a powerful method able to provide images of pertinent electrical properties in near-surface environments with unprecedented spatial resolution. In contrast, conventional ray-based tomographic methods, which consider only a very limited part of the recorded signal (first-arrival traveltimes and maximum first-cycle amplitudes), suffer from inherent limitations in resolution and may prove to be inadequate in complex environments. For a typical crosshole georadar survey the potential improvement in resolution when using waveform-based approaches instead of ray-based approaches is in the range of one order-of- magnitude. Moreover, the spatial resolution of waveform-based inversions is comparable to that of common logging methods. While in exploration seismology waveform tomographic imaging has become well established over the past two decades, it is comparably still underdeveloped in the georadar domain despite corresponding needs. Recently, different groups have presented finite-difference time-domain waveform inversion schemes for crosshole georadar data, which are adaptations and extensions of Tarantola's seminal nonlinear generalized least-squares approach developed for the seismic case. First applications of these new crosshole georadar waveform inversion schemes on synthetic and field data have shown promising results. However, there is little known about the limits and performance of such schemes in complex environments. To this end, the general motivation of my thesis is the evaluation of the robustness and limitations of waveform inversion algorithms for crosshole georadar data in order to apply such schemes to a wide range of real world problems.One crucial issue to making applicable and effective any waveform scheme to real-world crosshole georadar problems is the accurate estimation of the source wavelet, which is unknown in reality. Waveform inversion schemes for crosshole georadar data require forward simulations of the wavefield in order to iteratively solve the inverse problem. Therefore, accurate knowledge of the source wavelet is critically important for successful application of such schemes. Relatively small differences in the estimated source wavelet shape can lead to large differences in the resulting tomograms. In the first part of my thesis, I explore the viability and robustness of a relatively simple iterative deconvolution technique that incorporates the estimation of the source wavelet into the waveform inversion procedure rather than adding additional model parameters into the inversion problem. Extensive tests indicate that this source wavelet estimation technique is simple yet effective, and is able to provide remarkably accurate and robust estimates of the source wavelet in the presence of strong heterogeneity in both the dielectric permittivity and electrical conductivity as well as significant ambient noise in the recorded data. Furthermore, our tests also indicate that the approach is insensitive to the phase characteristics of the starting wavelet, which is not the case when directly incorporating the wavelet estimation into the inverse problem.Another critical issue with crosshole georadar waveform inversion schemes which clearly needs to be investigated is the consequence of the common assumption of frequency- independent electromagnetic constitutive parameters. This is crucial since in reality, these parameters are known to be frequency-dependent and complex and thus recorded georadar data may show significant dispersive behaviour. In particular, in the presence of water, there is a wide body of evidence showing that the dielectric permittivity can be significantly frequency dependent over the GPR frequency range, due to a variety of relaxation processes. The second part of my thesis is therefore dedicated to the evaluation of the reconstruction limits of a non-dispersive crosshole georadar waveform inversion scheme in the presence of varying degrees of dielectric dispersion. I show that the inversion algorithm, combined with the iterative deconvolution-based source wavelet estimation procedure that is partially able to account for the frequency-dependent effects through an "effective" wavelet, performs remarkably well in weakly to moderately dispersive environments and has the ability to provide adequate tomographic reconstructions.

Waveform inversion of crosshole georadar data: influence of source wavelet variability and the suitability of a single wavelet assumption

Waveform-based tomographic imaging of crosshole georadar data is a powerful method to investigate the shallow subsurface because of its ability to provide images of electrical properties in near-surface environments with unprecedented spatial resolution. A critical issue with waveform inversion is the a priori unknown source signal. Indeed, the estimation of the source pulse is notoriously difficult but essential for the effective application of this method. Here, we explore the viability and robustness of a recently proposed deconvolution-based procedure to estimate the source pulse during waveform inversion of crosshole georadar data, where changes in wavelet shape with location as a result of varying near-field conditions and differences in antenna coupling may be significant. Specifically, we examine whether a single, average estimated source current function can adequately represent the pulses radiated at all transmitter locations during a crosshole georadar survey, or whether a separate source wavelet estimation should be performed for each transmitter gather. Tests with synthetic and field data indicate that remarkably good tomographic reconstructions can be obtained using a single estimated source pulse when moderate to strong variability exists in the true source signal with antenna location. Only in the case of very strong variability in the true source pulse are tomographic reconstructions clearly improved by estimating a different source wavelet for each transmitter location.

Resultados preliminares en la caracterización geométrica 3D de un litosoma arenoso de progradación deltaica mediante Georadar (GPR) (Fm. Arenisca de Roda, Eoceno, Cuenca de Graus-Tremp).

A set of GPR profiles have been recorded in order to determine the 3D geometry of a prograding delta-front sandbody (Roda sandstone formation, Eocene, Graus-Tremp basin). Common Mid Points (CMP) also have been recorded to obtain the velocity of the electromagnetic wave in ground. In order to build the topsurface of a 3D prism a set of topographic points have been acquired. Most of the GPR profiles are oriented parallel to the progradation direction (NNE-SSW) and show the expected geometries. The 3D prism has been built from the individual profiles, which shows the three dimensional geometry of the sandy lithosome.

Aquisição e construção de modelos estáticos análogos a reservatórios petrolíferos com tecnologia lidar e georadar

The present work develops a methodology to establish a 3D digital static models petroleum reservoir analogue using LIDAR and GEORADAR technologies. Therefore, this work introduce The methodolgy as a new paradigm in the outcrop study, to purpose a consistent way to integrate plani-altimetric data, geophysics data, and remote sensing products, allowing 2D interpretation validation in contrast with 3D, complexes depositional geometry visualization, including in environmental immersive virtual reality. For that reason, it exposes the relevant questions of the theory of two technologies, and developed a case study using TerraSIRch SIR System-3000 made for Geophysical Survey Systems, and HDS3000 Leica Geosystems, using the two technologies, integrating them GOCAD software. The studied outcrop is plain to the view, and it s located at southeast Bacia do Parnaíba, in the Parque Nacional da Serra das Confusões. The methodology embraces every steps of the building process shows a 3D digital static models petroleum reservoir analogue, provide depositional geometry data, in several scales for Simulation petroleum reservoir

Imageamento digital de paleocavernas colapsadas com georadar

In this study, the methodological procedures involved in digital imaging of collapsed paleocaves in tufa using GPR are presented. These carbonate deposits occur in the Quixeré region, Ceará State (NE Brazil), on the western border of the Potiguar Basin. Collapsed paleocaves are exposed along a state road, which were selected to this study. We chose a portion of the called Quixeré outcrop for making a photomosaic and caring out a GPR test section to compare and parameterize the karst geometries on the geophysical line. The results were satisfactory and led to the adoption of criteria for the interpretation of others GPR sections acquired in the region of the Quixeré outcrop. Two grids of GPR lines were acquired; the first one was wider and more spaced and guided the location of the second grid, denser and located in the southern part of the outcrop. The radargrams of the second grid reveal satisfactorily the collapsed paleocaves geometries. For each grid has been developed a digital solid model of the Quixeré outcrop. The first model allows the recognition of the general distribution and location of collapsed paleocaves in tufa deposits, while the second more detailed digital model provides not only the 3D individualization of the major paleocaves, but also the estimation of their respective volumes. The digital solid models are presented here as a new frontier in the study of analog outcrops to reservoirs (for groundwater and hydrocarbon), in which the volumetric parameterization and characterization of geological bodies become essential for composing the databases, which together with petrophysical properties information, are used in more realistic computer simulations for sedimentary reservoirs.

Estudo da contaminação por hidrocarbonetos em postos de serviços de Abaetetuba-PA utilizando georadar

O trabalho apresenta os resultados de um levantamento Geofísico utilizando o método Radar de Penetração de Solo (GPR) ou Georadar para detectar possíveis zonas de contaminação provocadas por vazamentos de derivados de hidrocarbonetos em postos de serviços da região urbana do município de Abaetetuba, no estado do Pará. A metodologia foi aplicada em postos de serviços porque eles constituem uma das principais fontes potenciais urbanas de contaminação do solo e de aqüíferos rasos por combustíveis. Conceitos básicos sobre a contaminação por derivados do petróleo e sua interação com o subsolo são apresentados, juntamente com os princípios básicos que permitem o entendimento do funcionamento do método GPR para o problema abordado. Durante o trabalho, foram realizadas medidas do nível de água em poços rasos, visando a elaboração de um mapa de fluxo subterrâneo. A interpretação geofísica foi auxiliada pelo conhecimento do comportamento do fluxo hídrico subterrâneo local, que mostra o sentido de movimentação da provável contaminação. A correlação entre os dados de GPR, os dados de fluxo e as informações sobre o histórico dos postos levaram a classificá-los em suspeitos de produzir contaminação e possivelmente contaminados.

GEORADAR: applicazioni ingegneristiche finalizzate alla difesa idraulica del territorio

L’oggetto di questo lavoro è la verifica dell’applicabilità e dell’efficacia del GPR per identificare la presenza di cavità scavate da animali all’interno di manufatti arginali. In particolare, sono stati messi in luce soprattutto i limiti e le potenzialità di questa tecnica rispetto alle diverse condizioni ambientali nelle quali ci si trova ad operare e al grado di risoluzione del problema.

Aquisição e construção de modelos estáticos análogos a reservatórios petrolíferos com tecnologia lidar e georadar

The present work develops a methodology to establish a 3D digital static models petroleum reservoir analogue using LIDAR and GEORADAR technologies. Therefore, this work introduce The methodolgy as a new paradigm in the outcrop study, to purpose a consistent way to integrate plani-altimetric data, geophysics data, and remote sensing products, allowing 2D interpretation validation in contrast with 3D, complexes depositional geometry visualization, including in environmental immersive virtual reality. For that reason, it exposes the relevant questions of the theory of two technologies, and developed a case study using TerraSIRch SIR System-3000 made for Geophysical Survey Systems, and HDS3000 Leica Geosystems, using the two technologies, integrating them GOCAD software. The studied outcrop is plain to the view, and it s located at southeast Bacia do Parnaíba, in the Parque Nacional da Serra das Confusões. The methodology embraces every steps of the building process shows a 3D digital static models petroleum reservoir analogue, provide depositional geometry data, in several scales for Simulation petroleum reservoir

Analisi di una tecnica di indagine non distruttiva per la localizzazione delle barre di armatura nel C.A.: il georadar.

Il Ground Penetrating Radar (GPR) è una tecnica di indagine non distruttiva che si basa sulla teoria della propagazione delle onde elettromagnetiche. Questa tecnologia venne inizialmente utilizzata per indagini geologiche, ma più recentemente è stata introdotta anche per lo studio di altri materiali quali calcestruzzo, legno e asfalto. Questa tecnologia investigativa può essere utilizzata per varie problematiche : • Localizzazione di oggetti all’interno del materiale inglobante • Determinazione dello spessore dello strato del materiale oggetto di studio (calcestruzzo, asfalto, terreno, legno) • Proprietà del materiale, inclusa umidità ed eventuale presenza di vuoti Nella fase iniziale di questo lavoro di tesi sono stati studiati i principi fisici di funzionamento, la metodologia di elaborazione dei dati restituiti dallo strumento e di interpretazione dei risultati. Successivamente, è stato posto l’obbiettivo di verificare l’applicabilità del georadar nel rintracciare i ferri di armatura nelle travi da ponte. Quest’ultime sono spesso realizzate tramite l’impiego della precompressione con cavi post-tesi che implica la presenza di guaine con all’interno i relativi trefoli di tensionamento. Per simulare tali condizioni sono state realizzate in laboratorio delle “travi campione” con guaine in differente materiale, con differente posizionamento e con differente tecnologia di posa, in modo tale da permettere di studiare diversi scenari. Di seguito le differenti tipologie di travi : - Trave con guaine metalliche ; - Trave con guaine plastiche ; - Trave con interruzioni in polistirolo lungo le guaine (per simulare la corrosione delle stesse); - Travi con trefoli inseriti all’interno delle guaine (per studiarne l’influenza sul segnale).

Gestão integrada dos recursos hídricos da região de Fafe: caracterização da qualidade das águas superficiais, potencial hidrogeológico das rochas fraturadas

Dissertação de mestrado em Geociências (área de especialização em Recursos Geológicos)