Selection and characterisation of geological materials for use as geopolymer precursors

Geopolymer binders are generally formed by reacting powdered aluminosilicate precursors with alkali silicate activators. Most research to date has concentrated on using either pulverised fuel ash or high purity dehydroxylated kaolin (metakaolin) in association with ground granulated blast furnace slag as the main precursor material. However, recently, attention has turned to alternative calcined clays that are abundant throughout the globe and have lower kaolinite contents than commercially available metakaolins. Due to the lack of clear and simple screening protocols enabling assessment of such geological resources for use as precursors in geopolymer systems, the present paper presents results from experimental work that was carried out to develop a functional binder using materials containing kaolinite taken from the Interbasaltic Formation of Northern Ireland. The influence of mineralogy has been examined, and a screening process, using three Interbasaltic materials as examples, that will assist in the rapid selection of suitable geopolymeric precursors from such materials is outlined.

Determination of gold, platinum and palladium in geological samples by inductively coupled plasma-mass spectrometry after separation and preconcentration with C-410 anion exchange resin

A method for the determination of Au, Pt and Pd in geological samples is described. Au, Pt and Pd can be separated and concentrated quantitatively by C-410 anion-exchange resin in the condition of 1.5 mol/L HCl with the adsorption rates of 91.2%, 100.0% and 95.7% respectively. No interference exists from coexisting elements except for Ge(IV), Cr(VI),Ti(IV) in inductively coupled plasma-mass spectrometry. The detection limits are 0.27 mug/L, 0.40 mug/L and 0.19 mug/L for Au, Pt and Pd respectively. The results of these elements in standard geological materials are in agreement with certified values with precision of 19.2% RSD for Au (n = 8), 28.1% RSD for Pt (n=8), and 15.6% RSD for Pd (n=8).

Reading Maud’s remains: Tennyson, geological processes, and palaeontological reconstructions

As Tennyson's “little Hamlet ,” Maud (1855) posits a speaker who, like Hamlet, confronts the ignominious fate of dead remains. Maud's speaker contemplates such remains as bone, hair, shell, and he experiences his world as one composed of hard inorganic matter, such things as rocks, gems, flint, stone, coal, and gold. While Maud's imagery of “stones, and hard substances” has been read as signifying the speaker's desire “unnaturally to harden himself into insensibility” (Killham 231, 235), I argue that these substances benefit from being read in the context of Tennyson's wider understanding of geological processes. Along with highlighting these materials, the text's imagery focuses on processes of fossilisation, while Maud's characters appear to be in the grip of an insidious petrification. Despite the preoccupation with geological materials and processes, the poem has received little critical attention in these terms. Dennis R. Dean, for example, whose Tennyson and Geology (1985) is still the most rigorous study of the sources of Tennyson's knowledge of geology, does not detect a geological register in the poem, arguing that by the time Tennyson began to write Maud, he was “relatively at ease with the geological world” (Dean 21). I argue, however, that Maud reveals that Tennyson was anything but “at ease” with geology. While In Memoriam (1851) wrestles with religious doubt that is both initiated, and, to some extent, alleviated by geological theories, it finally affirms the transcendence of spirit over matter. Maud, conversely, gravitates towards the ground, concerning itself with the corporal remains of life and with the agents of change that operate on all matter. Influenced by his reading of geology, and particularly Charles Lyell's provocative writings on the embedding and fossilisation of organic material in strata in his Principles of Geology (1830–33) volume 2, Tennyson's poem probes the taphonomic processes that result in the incorporation of dead remains and even living flesh into the geological system.

Mechanism on Progressive Failure of a Faulted Rock Slope Due to Slip-Weakening

Slip-weakening is one of the characteristics of geological materials under certain loadings. Non-uniform rock structure may exist in the vicinity of the slip surface for a rock slope. Some portion of the slip surface may be penetrated but the other not. For the latter case, the crack or the fault surface will undergo shear deformation before it becomes a successive surface under a certain loading. As the slipped portion advances,slip-weakening occurs over a distance behind the crack tip. In the weakening zone, the shear strength will decrease from its peak value to residual friction level. The stress will redistribute along the surface of crack and in the weakening zone. Thus the changed local stress concentration leads the crack to extend and the ratio of penetration of the slip surface to increase. From the view of large-scale for the whole slip surface, the shear strength will decrease due to the damage of interior rock structure, and the faulted rock behaves as a softening material. Such a kind of mechanism performs in a large number of practical landslides in the zones experienced strong earthquakes. It should be noted that the mechanism mentioned above is different from that of the breakage of structural clay,in which the geological material is regarded as a medium containing structural lumps and structural bands. In this paper, the softening behavior of a faulted rock should be regarded as a comprehensive result of the whole complicated process including slip-weakening, redistribution of stress, extension of crack tip, and the penetration of the slip surface. This process is accompanied by progressive failure and abrupt structural damage. The size of slip-weakening zone is related to the undergoing strain. Once the relative slide is initiated (local or integrated), the effect of slip-weakening will behave in a certain length behind the crack tip until the formation of the whole slip surface.

Mechanism Analysis of Landslide of a Layered Slope Induced by Drawdown of Water Level

The frequent drawdown of water level of Yangtze River will greatly influence the stability of the widely existing slopes in the Three Gorges reservoir zone, especially those layered ones. Apart from the fluctuating speed of water level, the different geological materials will also play important roles in the failure of slopes. Thus, it must be first to study the mechanism of such a landslide caused by drawdown of water level.A new experimental setup is designed to study the performance of a layered slope under the drawdown of water level. The pattern of landslide of a layered slope induced by drawdown of water level has been explored by means of simulating experiments. The influence of fluctuating speed of water level on the stability of the layered slope is probed,especially the whole process of deformation and development of landslide of the slope versus time. The experimental results show that the slope is stable during the water level rising, and the sliding body occurs in the upper layer of the slope under a certain drawdown speed of water level. In the process of slope failure, some new small sliding body will develop on the main sliding body, and the result is that they speed up the disassembly of the whole slope.Based on the simulating experiment on landslide of a layered slope induced by drawdown of water level, the stress and displacement field of the slope are calculated.The seepage velocity, the pore water pressure, and the gradient of pore water head are also calculated for the whole process of drawdown of water level. The computing results are in good agreement with the experimental results. Accordingly, the mechanism of deformation and landslide of the layered slope induced by drawdown of water level is analyzed. It may provide basis for treating this kind of layered slopes in practical engineering.

Lu-Hf同位素的MC-ICP-MS实验方法及其在华北克拉通典型火山岩研究中的应用

Over past ten years, a great development has been made in the Lu-Hf isotopic system with the advent of MC-ICP-MS. Based on a comprehensive review of available references in the related field, a novel analytical protocol of three exchange chromatographies after one mixed acid attacking geological samples was developed in this work, which not only avoids common multiple sample treatments for natural inhomegeneous samples, but also is useful for Rb-Sr, Sm-Nd and Lu-Hf isotopic system simultaneously, especially for the garnet- and apatite-bearing rocks for the Sm-Nd and Lu-Hf geochronology. An analytical procedure for the Lu and Hf concentration in geological samples determined by by ID-MC-ICP-MS was detailedly investigated. The Hf yield is > 90 % and total procedural blank is less than. 50 pg for Hf and 10 pg for Lu, respectively. The developed method was successfully applied to the determination of Lu and Hf concentrations for USGS geological materials. A one-column procedure for Hf purification in geological samples using common anion exchange chromatography and its isotopic analyses by MC-ICP-MS were also established. Multiple analyses of Standard Reference Materials demonstrate that this method was simple, time-saving, cheap and efficient, especially suitable for the Hf isotopic compositions of young samples. Finally, the measurements of Sr and Nd isotopic compositions using Neptune MC-ICP-MS were described briefly, which indicates that Neptune MC-ICP-MS can precisely measure Sr and Nd isotopic compositions as the TIMS does, even more efficient and less time-consuming than the TIMS method. The Hf isotopic characteristics of typical volcanic rocks (Cenozoic Changle-Linqu basalts, Mesozoic Fangcheng basalts, Mesozoic Jianguo basalts, Mesozoic Wulahada high-Mg andesite, Cenozoic Fanshi, Zuoquan and Xiyang-Pingding basalts of the Taihang Mountains, Paleozoic diamondiferous Menyin and Fuxian Kimblites) from the North China Craton were firstly studied in this work. Coupled with Nd isotopic compositions, it shows that the Hf isotopes could be a better tracer for mantle sources than the Nd isotopes. Individual kimberlite fields from both the Mengyin and Fuxian regions have quite uniform Hf isotopic compositions, similar to the situation for the Nd isotopes.

Forensic Geology in Environmental Crime: Illegal Waste Movement Burial in Northern Ireland

The illegal burial of waste often occurs in locations where loose, transferable material is abundant, allowing covert pits to be dug or filled. The transfer of waste material onto suspects and their vehicles during loading, unloading, and burial is common, as is the case during other criminal activities such as the burial of murder victims. We use two case studies to show that the established principles of using geological materials in excluding or linking suspects can be applied to illegal waste disposal. In the first case, the layering of different geological materials on the tailgate of a container used to transport toxic waste demonstrated where the vehicle had been and denied the owner's alibi, associating him with an illegal dumpsite. In the second case, an unusual suite of minerals, recovered from a suspect's trousers, provided the intelligence that led environmental law enforcement officers to an illegal waste burial site.

Source depletion and extent of melting in the Tongan sub-arc mantle

The fluid immobile High Field Strength Elements (HFSE) Nb and Ta can be used to distinguish between the effects of variable extents of melting and prior source depletion of the Tongan sub-arc mantle. Melting of spinel Iherzolite beneath the Lau Basin back-arc spreading centres has the ability to fractionate Nb from Ta due to the greater compatibility of the latter in clinopyroxene. The identified spatial variation in plate velocities and separation of melt extraction zones, combined with extremely depleted lavas make Tonga an ideal setting in which to test models for arc melt generation and the role of back-arc magmatism. We present new data acquired by laser ablation-ICPMS of fused sample glasses produced without the use of a melt fluxing agent. The results show an arc trend towards strongly sub-chondritic Nb/Ta (

Hidroquímica e qualidade das águas subterrâneas da Ilha de Santiago - Cabo Verde

A ilha de Santiago, Cabo Verde é uma ilha de origem vulcânica, constituída basicamente por lavas e piroclastos, localizada no Oceano Atlântico ao lado da costa ocidental de África. A ilha é caracterizada por três unidades hidrogeológicas, sendo estas a Formação de Base (semi-confinada), a Formação Intermédia (freática) e a Formação Recente (freática), que apresentam características geológicas e comportamentos hidráulicos que as diferenciam, recebendo recarga directa e/ ou diferida por infiltração das águas de chuva e descarregam ao mar, na rede hidrográfica ou, ainda, em outros níveis aquíferos subjacentes, desde que induzidos por gradientes hidráulicos favoráveis. O clima de Santiago é árido a semi-árido, com precipitações muito escassas e irregulares, condicionadas na sua distribuição pela altitude, ventos e orientação das vertentes, dando por vezes origem a períodos de seca prolongados. Em anos de ‘boa’ chuva, as precipitações propiciam a existência temporária de recursos hídricos superficiais e a recarga dos recursos de água subterrânea. Foi realizado um estudo hidrogeoquímico detalhado da ilha que incluiu a recolha de amostras em 133 pontos de água, entre furos, poços e nascentes. A composição química das águas analisadas na ilha de Santiago apresenta significativas variações em função da geologia e do tempo de residência. Na ausência de episódios de contaminação, as águas subterrâneas têm uma composição do tipo bicarbonatada-sódica (HCO3-Na) nas zonas mais altas da ilha, onde afloram as formações da Unidade Aquífera Intermédia. Nas zonas mais próximas da costa ocorrem águas de composição cloretada-magnesiana (Cl-Mg) ou cloretada-sódica (Cl-Na). Estas últimas predominam nas partes terminais das ribeiras, onde afloram materiais de elevada permeabilidade, e o excesso de bombagem para irrigação tem conduzido a um avanço da cunha de intrusão marinha. A ocorrência da fácies Cl-Na é neste caso o resultado de processos de intercâmbio catiónico que ocorrem durante o processo de intrusão e é concordante com os elevados teores de cloretos e de condutividade eléctrica observados. Os resultados das análises de isótopos estáveis de oxigénio-18 e deutério, realizadas em amostras recolhidas a distintas altitudes, revelam um gradiente negativo com a altitude, que já tinha sido verificado em outras ilhas com declives acentuados, permitindo assim determinar altitudes de recarga de água subterrânea. Os estudos hidrogeoquímicos até agora realizados permitiram caracterizar os principais níveis aquíferos da ilha de Santiago, colocando em evidência a limitada recarga do aquífero e o risco de gradual degradação dos recursos de água subterrânea por fenómenos de intrusão salina e contaminação agrícola. Estes resultados revelam a importância da gestão integrada da qualidade e quantidade dos parcos recursos de água subterrânea na ilha de Santiago.

The Determination of Total Hydrogen, Carbon, Nitrogen and Sulfur in Silicates, Silicate Rocks, Soils and Sediments

Determinations of the volatile elements carbon, hydrogen, sulfur and nitrogen in many geological RM, performed with the LECO CHN and SC analysers, are presented. The method allowed the determination of S in concentrations from a few % m/m to 0.001% m/m or less, of C from % m/m to 0.01% m/m and of H from % m/m to 0.004% m/m. Accuracy was usually better than the XRF method (for S). All obtained values passed the Sutarno-Steger test, which establishes that vertical bar(mean(analysed) - mean(certified))vertical bar/ S(certified) < 2, for the cases with an appropriate number of determinations (n > 10 for each element). It was possible to perform routine determination of C, H and S with the instrumentation, coupled with the determination of major and minor elements in geological materials. Determination of nitrogen could also be performed on an exploratory basis, with improvements in the method dependent on the future availability of more reference materials with reliable composition of this element.

Metodologia para determinação de arsênio, antimônio e bismuto por espectrometria de emissão óptica com fonte de plasma acoplado indutivamente (ICPOES) e geração de hidretos aplicada à rochas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

DETERMINAÇÃO DE ARSÊNIO, ANTIMÔNIO E BISMUTO EM ROCHAS POR ESPECTROMETRIA DE EMISSÃO ÓPTICA COM FONTE DE PLASMA ACOPLADO INDUTIVAMENTE (ICP-OES) E GERAÇÃO DE HIDRETOS

No presente trabalho descreve-se o método para determinação de arsênio, antimônio e bismuto em materiais geológicos, utilizando a geração de hidretos acoplado ao ICP-OES, que proporciona a determinação, com exatidão, dos elementos de interesse em concentrações abaixo de 1 ppm. O método é sensível e, por isso, está sujeito a interferências, como as causadas por elementos presentes na matriz. Desenvolveu-se uma técnica de dissolução eficiente e foram realizados diversos tratamentos com dopagens de soluções-padrão e testes com o uso de tiouréia e iodeto de potássio com ácido ascórbico em diferentes concentrações, com o objetivo de minimizar possíveis interferências presentes na matriz. Os resultados finais, mediante a dissolução de material geológico de referência internacional na determinação de arsênio, bismuto e antimônio, mostraram recuperações superiores à 97% em amostras com concentrações abaixo de 1 ppm.

Caracterização mineralógica e química das fontes de poeira e sua influência na atmosfera da região do polo cerâmico de Santa Gertrudes (SP)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

"Brienzi" - The blue Vivianite man of Switzerland: Time since death estimation of an adipocere body

In 1996, a cadaver in adipocere condition was discovered in a bay of the Brienzer See in Switzerland. The torso was named "Brienzi" following the "Iceman" Ötzi. Several outer parts of the body were incrusted; the incrustation was in blue color. Further investigations showed that the bluish covering of parts of the adipocere torso were a mineral known as Vivianite. Vivianite (Fe(3)(PO(4))(2-)(H(2)O)(8)) is an iron phosphate mineral with needle lengths between 100 and 150μm. It is normally associated in a context with organic archaeological and geological materials (some hundreds to millions of years old). Hitherto, it is only described in three cases of human remains. We were able to reconstruct the following facts about 'Brienzi': The man drowned in Lake Brienz or in one of its tributaries during the 1700s. The body was subsequently covered with sedimentation and thus buried under water. An earthquake produced an underwater landslide which eventually exposed the corpse.

High precision determination of the terrestrial 40K abundance

Recent improvements in the precision of mass spectrometric measurements have reduced the uncertainty of K-Ar and 39Ar-40Ar ages measured on geological materials. Now the major sources of uncertainty are the uncertainties on the 40K decay constant and the absolute abundance of 40K. In order to improve on this situation we determined the abundance of the 40K isotope in terrestrial standards. A ThermoFischer Triton+ thermal ionization mass spectrometer was used for K isotope ratio measurements of the NIST K standard reference materials SRM 918b and SRM 985. Ion beams were measured in Faraday cups with amplifiers equipped with 1E10, 1E11 and 1E12 Ω resistors. Three measurement protocols were used: (A) dynamic measurement with in-run fractionation correction by normalization to the IUPAC recommended isotope ratio 41K/39K = 0.0721677; (B) total evaporation; (C) a modified total evaporation with interblock baseline measurements. Different measurement protocols were combined with different loading procedures. The best results were obtained by loading samples on single tantalum filaments with 0.1M H3PO4. The total ion yields (ionization + transmission) were tested for the evaporation procedures (B) and (C) and ranged up to 48 %. The resulting best estimate for the 40K/39K ratio is 0.000 125 116 ± 57 (2σ), corresponding to 40K/K = (1.1668 ± 8; 2σ) x 10-4.