Reduction Measurements for Calculation in Fuzzy Experiment Scheme

The papers is dedicated to the questions of modeling and basing super-resolution measuring- calculating systems in the context of the conception “device + PC = new possibilities”. By the authors of the article the new mathematical method of solution of the multi-criteria optimization problems was developed. The method is based on physic-mathematical formalism of reduction of fuzzy disfigured measurements. It is shown, that determinative part is played by mathematical properties of physical models of the object, which is measured, surroundings, measuring components of measuring-calculating systems and theirs cooperation as well as the developed mathematical method of processing and interpretation of measurements problem solution.

Functional encryption for threshold functions (or fuzzy IBE) from lattices

Cryptosystems based on the hardness of lattice problems have recently acquired much importance due to their average-case to worst-case equivalence, their conjectured resistance to quantum cryptanalysis, their ease of implementation and increasing practicality, and, lately, their promising potential as a platform for constructing advanced functionalities. In this work, we construct “Fuzzy” Identity Based Encryption from the hardness of the Learning With Errors (LWE) problem. We note that for our parameters, the underlying lattice problems (such as gapSVP or SIVP) are assumed to be hard to approximate within supexponential factors for adversaries running in subexponential time. We give CPA and CCA secure variants of our construction, for small and large universes of attributes. All our constructions are secure against selective-identity attacks in the standard model. Our construction is made possible by observing certain special properties that secret sharing schemes need to satisfy in order to be useful for Fuzzy IBE. We also discuss some obstacles towards realizing lattice-based attribute-based encryption (ABE).

Active yaw control of a vehicle using a Fuzzy logic algorithm

Yaw rate of a vehicle is highly influenced by the lateral forces generated at the tire contact patch to attain the desired lateral acceleration, and/or by external disturbances resulting from factors such as crosswinds, flat tire or, split-μ braking. The presence of the latter and the insufficiency of the former may lead to undesired yaw motion of a vehicle. This paper proposes a steer-by-wire system based on fuzzy logic as yaw-stability controller for a four-wheeled road vehicle with active front steering. The dynamics governing the yaw behavior of the vehicle has been modeled in MATLAB/Simulink. The fuzzy controller receives the yaw rate error of the vehicle and the steering signal given by the driver as inputs and generates an additional steering angle as output which provides the corrective yaw moment. The results of simulations with various drive input signals show that the yaw stability controller using fuzzy logic proposed in the current study has a good performance in situations involving unexpected yaw motion. The yaw rate errors of a vehicle having the proposed controller are notably smaller than an uncontrolled vehicle's, and the vehicle having the yaw stability controller recovers lateral distance and desired yaw rate more quickly than the uncontrolled vehicle.

Modelagem Fuzzy para previsão de uma série temporal de energia elétrica.

Esta dissertação testa e compara dois tipos de modelagem para previsão de uma mesma série temporal. Foi observada uma série temporal de distribuição de energia elétrica e, como estudo de caso, optou-se pela região metropolitana do Estado da Bahia. Foram testadas as combinações de três variáveis exógenas em cada modelo: a quantidade de clientes ligados na rede de distribuição de energia elétrica, a temperatura ambiente e a precipitação de chuvas. O modelo linear de previsão de séries temporais utilizado foi um SARIMAX. A modelagem de inteligência computacional utilizada para a previsão da série temporal foi um sistema de Inferência Fuzzy. Na busca de um melhor desempenho, foram feitos testes de quais variáveis exógenas melhor influenciam no comportamento da energia distribuída em cada modelo. Segundo a avaliação dos testes, o sistema Fuzzy de previsão foi o que obteve o menor erro. Porém dentre os menores erros, os resultados dos testes também indicaram diferentes variáveis exógenas para cada modelo de previsão.

Fuzzy clustering of non-convex patterns using global optimization

This paper discusses various extensions of the classical within-group sum of squared errors functional, routinely used as the clustering criterion. Fuzzy c-means algorithm is extended to the case when clusters have irregular shapes, by representing the clusters with more than one prototype. The resulting minimization problem is non-convex and non-smooth. A recently developed cutting angle method of global optimization is applied to this difficult problem

Modeling and control of flatness in cold rolling mill using fuzzy petri nets

Today, having a good flatness control in steel industry is essential to ensure an overall product quality, productivity and successful processing. Flatness error, given as difference between measured strip flatness and target curve, can be minimized by modifying roll gap with various control functions. In most practical systems, knowing the definition of the model in order to have an acceptable control is essential. In this paper, a fuzzy Petri net method for modeling and control of flatness in cold rolling mill is developed. The method combines the concepts of Petri net and fuzzy control theories. It focuses on the fuzzy decision making problems of the fuzzy rule tree structures. The method is able to detect and recover possible errors that can occur in the fuzzy rule of the knowledge-based system. The method is implemented and simulated. The results show that its error is less than that of a PI conventional controller.

A non-linear programming-based similarity reasoning scheme for modelling of monotonicity-preserving multi-input fuzzy inference systems

In this paper, the zero-order Sugeno Fuzzy Inference System (FIS) that preserves the monotonicity property is studied. The sufficient conditions for the zero-order Sugeno FIS model to satisfy the monotonicity property are exploited as a set of useful governing equations to facilitate the FIS modelling process. The sufficient conditions suggest a fuzzy partition (at the rule antecedent part) and a monotonically-ordered rule base (at the rule consequent part) that can preserve the monotonicity property. The investigation focuses on the use of two Similarity Reasoning (SR)-based methods, i.e., Analogical Reasoning (AR) and Fuzzy Rule Interpolation (FRI), to deduce each conclusion separately. It is shown that AR and FRI may not be a direct solution to modelling of a multi-input FIS model that fulfils the monotonicity property, owing to the difficulty in getting a set of monotonically-ordered conclusions. As such, a Non-Linear Programming (NLP)-based SR scheme for constructing a monotonicity-preserving multi-input FIS model is proposed. In the proposed scheme, AR or FRI is first used to predict the rule conclusion of each observation. Then, a search algorithm is adopted to look for a set of consequents with minimized root means square errors as compared with the predicted conclusions. A constraint imposed by the sufficient conditions is also included in the search process. Applicability of the proposed scheme to undertaking fuzzy Failure Mode and Effect Analysis (FMEA) tasks is demonstrated. The results indicate that the proposed NLP-based SR scheme is useful for preserving the monotonicity property for building a multi-input FIS model with an incomplete rule base.

A new monotonicity index for fuzzy rule-based systems

A search in the literature reveals that mathematical conditions (usually sufficient conditions) for the Fuzzy Inference System (FIS) models to satisfy the monotonicity property have been developed. A monotonically-ordered fuzzy rule base is important to maintain the monotonicity property of an FIS. However, it may difficult to obtain a monotonically-ordered fuzzy rule base in practice. We have previously introduced the idea of fuzzy rule relabeling to tackle this problem. In this paper, we further propose a monotonicity index for the FIS system, which serves as a metric to indicate the degree of a fuzzy rule base fulfilling the monotonicity property. The index is useful to provide an indication whether a fuzzy rule base should (or should not) be used in practice, even with fuzzy rule relabeling. To illustrate the idea, the zero-order Sugeno FIS model is exemplified. We add noise as errors into the fuzzy rule base to formulate a set of non-monotone fuzzy rules. As such, the metric also acts as a measure of noise in the fuzzy rule base. The results show that the proposed metric is useful to indicate the degree of a fuzzy rule base fulfilling the monotonicity property.

From ranking fuzzy numbers to solving fuzzy linear programming: a comprehensive review

Solving fuzzy linear programming (FLP) requires the employment of a consistent ranking of fuzzy numbers. Ineffective fuzzy number ranking would lead to a flawed and erroneous solving approach. This paper presents a comprehensive and extensive review on fuzzy number ranking methods. Ranking techniques are categorised into six classes based on their characteristics. They include centroid methods, distance methods, area methods, lexicographical methods, methods based on decision maker's viewpoint, and methods based on left and right spreads. A survey on solving approaches to FLP is also reported. We then point out errors in several existing methods that are relevant to the ranking of fuzzy numbers and thence suggest an effective method to solve FLP. Consequently, FLP problems are converted into non-fuzzy single (or multiple) objective linear programming based on a consistent centroid-based ranking of fuzzy numbers. Solutions of FLP are then obtained by solving corresponding crisp single (or multiple) objective programming problems by conventional methods.

A new fuzzy-based combined prediction interval for wind power forecasting

This paper makes use of the idea of prediction intervals (PIs) to capture the uncertainty associated with wind power generation in power systems. Since the forecasting errors cannot be appropriately modeled using distribution probability functions, here we employ a powerful nonparametric approach called lower upper bound estimation (LUBE) method to construct the PIs. The proposed LUBE method uses a new framework based on a combination of PIs to overcome the performance instability of neural networks (NNs) used in the LUBE method. Also, a new fuzzy-based cost function is proposed with the purpose of having more freedom and flexibility in adjusting NN parameters used for construction of PIs. In comparison with the other cost functions in the literature, this new formulation allows the decision-makers to apply their preferences for satisfying the PI coverage probability and PI normalized average width individually. As the optimization tool, bat algorithm with a new modification is introduced to solve the problem. The feasibility and satisfying performance of the proposed method are examined using datasets taken from different wind farms in Australia.

Previsão de cargas elétricas através de uma Rede Neural Híbrida Back-ART Fuzzy

Pós-graduação em Engenharia Elétrica - FEIS

Modelagem e controle de sistemas fuzzy Takagi-Sugeno

Pós-graduação em Engenharia Elétrica - FEIS

Metodologia baseada em sistema fuzzy intervalar do tipo-2 para detecção e identificação de faltas de incipientes em motores de indução

Desde a incorporação da automação no processo produtivo, a busca por sistemas mais eficientes, objetivando o aumento da produtividade e da qualidade dos produtos e serviços, direcionou os estudos para o planejamento de estratégias que permitissem o monitoramento de sistemas com o intuito principal de torna-los mais autônomos e robustos. Por esse motivo, as pesquisas envolvendo o diagnóstico de faltas em sistemas industriais tornaram-se mais intensivas, visto a necessidade da incorporação de técnicas para monitoramente detalhado de sistemas. Tais técnicas permitem a verificação de perturbações, falta ou mesmo falhas. Em vista disso, essa trabalho investiga técnicas de detecção e diagnostico de faltas e sua aplicação em motores de indução trifásicos, delimitando o seu estudo em duas situações: sistemas livre de faltas, e sobre atuação da falta incipiente do tipo curto-circuitoparcial nas espiras do enrolamento do estator. Para a detecção de faltas, utilizou-se analise paramétrica dos parâmetros de um modelo de tempo discreto, de primeira ordem, na estrutura autoregressivo com entradas exógenas (ARX). Os parâmetros do modelo ARX, que trazem informação sobre a dinâmica dominante do sistema, são obtidos recursivamente pela técnica dos mínimos quadrados recursivos (MQR). Para avaliação da falta, foi desenvolvido um sistema de inferência fuzzy (SIF) intervala do tipo-2, cuja mancha de incerteza ou footprint of uncertainty (FOU), características de sistema fuzzy tipo-2, é ideal como forma de representar ruídos inerentes a sistemas reais e erros numéricos provenientes do processo de estimação paramétrica. Os parâmetros do modelo ARX são entradas para o SIF. Algoritmos genéricos (AG’s) foram utilizados para otimização dos SIF intervalares tipo-2, objetivando reduzir o erro de diagnóstico da falta identificada na saída desses sistemas. Os resultados obtidos em teste de simulação computacional demonstram a efetividade da metodologia proposta.

Análise dos indicadores biométricos e nutricionais da cultura da alface (Lactuca sativa L.) irrigada com água tratada magneticamente utilizando modelagem fuzzy

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Fuzzy data envelopment analysis:a discrete approach

Data envelopment analysis (DEA) as introduced by Charnes, Cooper, and Rhodes (1978) is a linear programming technique that has widely been used to evaluate the relative efficiency of a set of homogenous decision making units (DMUs). In many real applications, the input-output variables cannot be precisely measured. This is particularly important in assessing efficiency of DMUs using DEA, since the efficiency score of inefficient DMUs are very sensitive to possible data errors. Hence, several approaches have been proposed to deal with imprecise data. Perhaps the most popular fuzzy DEA model is based on a-cut. One drawback of the a-cut approach is that it cannot include all information about uncertainty. This paper aims to introduce an alternative linear programming model that can include some uncertainty information from the intervals within the a-cut approach. We introduce the concept of "local a-level" to develop a multi-objective linear programming to measure the efficiency of DMUs under uncertainty. An example is given to illustrate the use of this method.