Kuljetusten suunnittelujärjestelmän toteutus

Kuusakoski Oy on maailmanlaajuisesti toimiva kierrätysyritys, jolla on yli 100 toimipistettä 10 eri maassa. Toimipisteistä osa pelkästään vastaanottaa kierrätysmateriaalia, osassa suoritetaan myös kierrätysmateriaalin jatkojalostusta. Lisäksi Kuusakoski Oy tarjoaa kierrätysmateriaalin noutopalvelua asiakkailleen. Edellä mainituista syistä kuljetus ja logistiikka nousevat yrityksen toiminnassa merkittävään rooliin. Tässä diplomityössä tehtiin Kuusakoski Oy:n kuljetusten suunnittelujärjestelmän toteutus. Järjestelmän toteutuksen teknisessä tutkimisessa keskityttiin kolmeen pääaiheeseen: ohjelmistoarkkitehtuuriin, karttapalvelujen sekä ajoneuvopäätteen ja toimistosovellusten väliseen rajapintaan. Diplomityön empiirisessä osuudessa käsitellään järjestelmän toimintaa sekä tietokannan että käyttöliittymän näkökulmasta.

HIGHER-DERIVATIVE SCHWINGER MODEL

Using the operator formalism, we obtain the bosonic representation for the free fermion field satisfying an equation of motion with higher-order derivatives. Then, we consider the operator solution of a generalized Schwinger model with higher-derivative coupling. Since the increasing of the derivative order implies the introduction of an equivalent number of extra fermionic degrees of freedom, the mass acquired by the gauge field is bigger than the one for the standard two-dimensional QED. An analysis of the problem from the functional integration point of view corroborates the findings of canonical quantization, and corrects certain results previously announced in the literature on the basis of Fujikawa's technique.

Applications of High Speed Configurable Logic Devices in Modern Particle Physics Experiments

Several activities were conducted during my PhD activity. For the NEMO experiment a collaboration between the INFN/University groups of Catania and Bologna led to the development and production of a mixed signal acquisition board for the Nemo Km3 telescope. The research concerned the feasibility study for a different acquisition technique quite far from that adopted in the NEMO Phase 1 telescope. The DAQ board that we realized exploits the LIRA06 front-end chip for the analog acquisition of anodic an dynodic sources of a PMT (Photo-Multiplier Tube). The low-power analog acquisition allows to sample contemporaneously multiple channels of the PMT at different gain factors in order to increase the signal response linearity over a wider dynamic range. Also the auto triggering and self-event-classification features help to improve the acquisition performance and the knowledge on the neutrino event. A fully functional interface towards the first level data concentrator, the Floor Control Module, has been integrated as well on the board, and a specific firmware has been realized to comply with the present communication protocols. This stage of the project foresees the use of an FPGA, a high speed configurable device, to provide the board with a flexible digital logic control core. After the validation of the whole front-end architecture this feature would be probably integrated in a common mixed-signal ASIC (Application Specific Integrated Circuit). The volatile nature of the configuration memory of the FPGA implied the integration of a flash ISP (In System Programming) memory and a smart architecture for a safe remote reconfiguration of it. All the integrated features of the board have been tested. At the Catania laboratory the behavior of the LIRA chip has been investigated in the digital environment of the DAQ board and we succeeded in driving the acquisition with the FPGA. The PMT pulses generated with an arbitrary waveform generator were correctly triggered and acquired by the analog chip, and successively they were digitized by the on board ADC under the supervision of the FPGA. For the communication towards the data concentrator a test bench has been realized in Bologna where, thanks to a lending of the Roma University and INFN, a full readout chain equivalent to that present in the NEMO phase-1 was installed. These tests showed a good behavior of the digital electronic that was able to receive and to execute command imparted by the PC console and to answer back with a reply. The remotely configurable logic behaved well too and demonstrated, at least in principle, the validity of this technique. A new prototype board is now under development at the Catania laboratory as an evolution of the one described above. This board is going to be deployed within the NEMO Phase-2 tower in one of its floors dedicated to new front-end proposals. This board will integrate a new analog acquisition chip called SAS (Smart Auto-triggering Sampler) introducing thus a new analog front-end but inheriting most of the digital logic present in the current DAQ board discussed in this thesis. For what concern the activity on high-resolution vertex detectors, I worked within the SLIM5 collaboration for the characterization of a MAPS (Monolithic Active Pixel Sensor) device called APSEL-4D. The mentioned chip is a matrix of 4096 active pixel sensors with deep N-well implantations meant for charge collection and to shield the analog electronics from digital noise. The chip integrates the full-custom sensors matrix and the sparsifification/readout logic realized with standard-cells in STM CMOS technology 130 nm. For the chip characterization a test-beam has been set up on the 12 GeV PS (Proton Synchrotron) line facility at CERN of Geneva (CH). The collaboration prepared a silicon strip telescope and a DAQ system (hardware and software) for data acquisition and control of the telescope that allowed to store about 90 million events in 7 equivalent days of live-time of the beam. My activities concerned basically the realization of a firmware interface towards and from the MAPS chip in order to integrate it on the general DAQ system. Thereafter I worked on the DAQ software to implement on it a proper Slow Control interface of the APSEL4D. Several APSEL4D chips with different thinning have been tested during the test beam. Those with 100 and 300 um presented an overall efficiency of about 90% imparting a threshold of 450 electrons. The test-beam allowed to estimate also the resolution of the pixel sensor providing good results consistent with the pitch/sqrt(12) formula. The MAPS intrinsic resolution has been extracted from the width of the residual plot taking into account the multiple scattering effect.

Identificazione dei meccanismi molecolari responsabili del ruolo oncosoppressivo della molecola CD99 nell'osteosarcoma

CD99, glicoproteina di membrana codificata dal gene MIC2, è coinvolta in numerosi processi cellulari, inclusi adesione, migrazione, apoptosi, differenziamento e regolazione del trafficking intracellulare di proteine, in condizioni fisiologiche e patologiche. Nell’osteosarcoma risulta scarsamente espressa ed ha ruolo oncosoppressivo. L’isoforma completa (CD99wt) e l’isoforma tronca (CD99sh), deleta di una porzione del dominio intracellulare, influenzano in modo opposto la malignità tumorale. In questo studio, comparando cellule di osteosarcoma caratterizzate da differenti capacità metastatiche e diversa espressione di CD99, abbiamo valutato la modulazione dei contatti cellula-cellula, la riorganizzazione del citoscheletro di actina e la modulazione delle vie di segnalazione a valle del CD99, al fine di identificare i meccanismi molecolari regolati da questa molecola e responsabili del comportamento migratorio e invasivo delle cellule di osteosarcoma. L'espressione forzata di CD99wt induce il reclutamento di N-caderina e β-catenina a livello delle giunzioni aderenti ed inibisce l'espressione di molecole cruciali nel processo di rimodellamento del citoscheletro di actina, come ACTR2, ARPC1A, Rho-associated, coiled–coil-containing protein kinase 2 (ROCK2), nonché di ezrina, membro della famiglia ezrin/radixin/moesin e chiaramente associata con la progressione tumorale e la metastatizzazione dell’OS. Gli studi funzionali identificano ROCK2 come mediatore fondamentale nella regolazione della migrazione e della diffusione metastatica dell’osteosarcoma. Mantenendo cSRC in una conformazione inattiva, CD99wt inibisce la segnalazione mediata da ROCK2 inducendo una diminuzione dell’ezrina a livello della membrana accompagnata dalla traslocazione in membrana di N-caderina e β-catenina, principali ponti molecolari per il citoscheletro di actina. La ri-espressione di CD99wt, generalmente presente negli osteoblasti, ma perso nelle cellule di osteosarcoma, attraverso l'inibizione dell'attività di cSrc e ROCK2, aumenta la forza di contatto e riattiva i segnali anti-migratori ostacolando l’azione pro-migratoria, altrimenti dominante, dell’ezrina nell’osteosarcoma. Abbiamo infine valutato la funzione di ROCK2 nel sarcoma di Ewing: nonostante il ruolo oncogenico esercitato da CD99, ROCK2 guida la migrazione cellulare anche in questa neoplasia.

Aplicación móvil multiplataforma para el aprendizaje de lenguajes de programación. Caso práctico con Swift

En este proyecto se ha estudiado el abanico de posibilidades que las plataformas web y móviles ofrecen para aprender lenguajes de programación compilados. A continuación, se ha realizado el diseño y la implementación de una plataforma para el aprendizaje de lenguajes de programación desde dispositivos móviles, con posibilidad de compilación remota desde la aplicación desarrollada, analizando el proceso y las elecciones de desarrollo tomadas. Así, se ha desarrollado una app mediante la plataforma de desarrollo Cordova, que puede ser distribuida para todas las plataformas móviles que esta soporta, incluyendo las más populares: iOS y Android. Para la parte servidora se ha utilizado un servidor Apache (PHP) y el sistema NoSQL MongoDB para la base de datos. Para mayor facilidad en la gestión del contenido de la app, se ha desarrollado en paralelo un gestor web de la base de datos, el cual permite añadir, editar y eliminar contenido de la misma a través de una interfaz agradable y funcional. ABSTRACT. In this project I have studied the range of possibilities that web and mobile platforms offer to learn compiled programming languages. Next, I have designed and implemented a platform for learning programming languages from mobile devices, giving the possibility of remote compilation within the developed application. In this terms, I have developed an app with the Cordova development platform, which can be distributed for all the mobile platforms Cordova supports, including the most popular ones: iOS and Android. For the server part, I have used an Apache (PHP) server and the NoSQL database system MongoDB. In order to offer a more usable system and a better database management, I have also developed a web manager for the database, from which database content can be added, edited and removed, through a clear and functional interface.

Word order in Yiddish narrative discourse

Based on data from spoken narrative discourse in Yiddish, this paper analyses two structures common in Yiddish narrations: The placement of the finite verb in the first position of a declarative sentence, and topicalization.Like German, Yiddish word order is generally centered around a verb-second rule. However, both Yiddish and spoken German show configurations of word order that go against the rule, where the finite verb occupies the first position of the utterance. From a functional-pragmatic point of view, these structures can be said to serve special purposes in the interaction between speaker and listener, sometimes in particular discourse types.Differences and similarities in word order between Yiddish and German enable us to comment on the relationship between these two closely related languages.

Dynamics of learning with restricted training sets

The dynamics of supervised learning in layered neural networks were studied in the regime where the size of the training set is proportional to the number of inputs. The evolution of macroscopic observables, including the two relevant performance measures can be predicted by using the dynamical replica theory. Three approximation schemes aimed at eliminating the need to solve a functional saddle-point equation at each time step have been derived.

Functional elucidation of pag through the generation of truncation and point mutants

T-cell signalling, PAG, adaptor proteins, lipid rafts, palmitoylation, chemokine induced migration

Freezing of 4He and its liquid-solid interface from density functional theory

We show that, at high densities, fully variational solutions of solidlike types can be obtained from a density functional formalism originally designed for liquid 4He . Motivated by this finding, we propose an extension of the method that accurately describes the solid phase and the freezing transition of liquid 4He at zero temperature. The density profile of the interface between liquid and the (0001) surface of the 4He crystal is also investigated, and its surface energy evaluated. The interfacial tension is found to be in semiquantitative agreement with experiments and with other microscopic calculations. This opens the possibility to use unbiased density functional (DF) methods to study highly nonhomogeneous systems, like 4He interacting with strongly attractive impurities and/or substrates, or the nucleation of the solid phase in the metastable liquid.

Formation and distribution of point defects on a disclination line near a free nematic interface

Point defects of opposite signs can alternately nucleate on the -1/2 disclination line that forms near the free surface of a confined nematic liquid crystal. We show the existence of metastable configurations consisting of periodic repetitions of such defects. These configurations are characterized by a minimal interdefect spacing that is seen to depend on sample thickness and on an applied electric field. The time evolution of the defect distribution suggests that the defects attract at small distances and repel at large distances.

The use of heterogeneous chemistry for the characterization of functional groups at the gas/particle interface of soot and TiO(2) nanoparticles

Six gases (N((CH3)3), NH2OH, CF3COOH, HCl, NO2, O3) were selected to probe the surface of seven combustion aerosol (amorphous carbon, flame soot) and three types of TiO2 nanoparticles using heterogeneous, that is gas-surface reactions. The gas uptake to saturation of the probes was measured under molecular flow conditions in a Knudsen flow reactor and expressed as a density of surface functional groups on a particular aerosol, namely acidic (carboxylic) and basic (conjugated oxides such as pyrones, N-heterocycles) sites, carbonyl (R1-C(O)-R2) and oxidizable (olefinic, -OH) groups. The limit of detection was generally well below 1% of a formal monolayer of adsorbed probe gas. With few exceptions most investigated aerosol samples interacted with all probe gases which points to the coexistence of different functional groups on the same aerosol surface such as acidic and basic groups. Generally, the carbonaceous particles displayed significant differences in surface group density: Printex 60 amorphous carbon had the lowest density of surface functional groups throughout, whereas Diesel soot recovered from a Diesel particulate filter had the largest. The presence of basic oxides on carbonaceous aerosol particles was inferred from the ratio of uptakes of CF3COOH and HCl owing to the larger stability of the acetate compared to the chloride counterion in the resulting pyrylium salt. Both soots generated from a rich and a lean hexane diffusion flame had a large density of oxidizable groups similar to amorphous carbon FS 101. TiO2 15 had the lowest density of functional groups among the three studied TiO2 nanoparticles for all probe gases despite the smallest size of its primary particles. The used technique enabled the measurement of the uptake probability of the probe gases on the various supported aerosol samples. The initial uptake probability, g0, of the probe gas onto the supported nanoparticles differed significantly among the various investigated aerosol samples but was roughly correlated with the density of surface groups, as expected. [Authors]

Probing functional groups at the gas-aerosol interface using heterogeneous titration reactions: a tool for predicting aerosol health effects?

The complex chemical and physical nature of combustion and secondary organic aerosols (SOAs) in general precludes the complete characterization of both bulk and interfacial components. The bulk composition reveals the history of the growth process and therefore the source region, whereas the interface controls--to a large extent--the interaction with gases, biological membranes, and solid supports. We summarize the development of a soft interrogation technique, using heterogeneous chemistry, for the interfacial functional groups of selected probe gases [N(CH(3))(3), NH(2)OH, CF(3)COOH, HCl, O(3), NO(2)] of different reactivity. The technique reveals the identity and density of surface functional groups. Examples include acidic and basic sites, olefinic and polycyclic aromatic hydrocarbon (PAH) sites, and partially and completely oxidized surface sites. We report on the surface composition and oxidation states of laboratory-generated aerosols and of aerosols sampled in several bus depots. In the latter case, the biomarker 8-hydroxy-2'-deoxyguanosine, signaling oxidative stress caused by aerosol exposure, was isolated. The increase in biomarker levels over a working day is correlated with the surface density N(i)(O3) of olefinic and/or PAH sites obtained from O(3) uptakes as well as with the initial uptake coefficient, γ(0), of five probe gases used in the field. This correlation with γ(0) suggests the idea of competing pathways occurring at the interface of the aerosol particles between the generation of reactive oxygen species (ROS) responsible for oxidative stress and cellular antioxidants.

Optimizing the Testing Process in Module Testing – Functional Testing Interface

Today's business environment has become increasingly unexpected and fast changing because of the global competition. This new environment requires the companies to organize their control differently, e.g. by logistic process thinking. Logistic process thinking in software engineering applies the principles of production process to immaterial products. Processes must be optimized, so that every phase adds value to the customer, and the lead times can be cut shorter to meet the new customer requirements. The purpose of this thesis is to examine and optimize the testing processes of software engineering concentrating on module testing, functional testing and their interface. The concept of logistic process thinking is introduced through production process, value added model and process management. Also theory of testing based on literature is presented, concentrating on module testing and functional testing. The testing processes of the Case Company are presented together with the project models in which they are implemented. The real life practices in module testing and functional testing and their interface are examined through interviews. These practices are analyzed against the processes and the testing theory, through which ideas for optimizing the testing process are introduced. The project world of the Case Company is also introduced together with two example testing projects in different life cycle phases. The examples give a view of how much effort of the project is put in different types of testing.

Freezing of 4He and its liquid-solid interface from density functional theory

We show that, at high densities, fully variational solutions of solidlike types can be obtained from a density functional formalism originally designed for liquid 4He . Motivated by this finding, we propose an extension of the method that accurately describes the solid phase and the freezing transition of liquid 4He at zero temperature. The density profile of the interface between liquid and the (0001) surface of the 4He crystal is also investigated, and its surface energy evaluated. The interfacial tension is found to be in semiquantitative agreement with experiments and with other microscopic calculations. This opens the possibility to use unbiased density functional (DF) methods to study highly nonhomogeneous systems, like 4He interacting with strongly attractive impurities and/or substrates, or the nucleation of the solid phase in the metastable liquid.

Electronic structure of point defects in controlled self-doping of the TiO2 (110) surface: Combined photoemission spectroscopy and density functional theory study

Point defects in metal oxides such as TiO2 are key to their applications in numerous technologies. The investigation of thermally induced nonstoichiometry in TiO2 is complicated by the difficulties in preparing and determining a desired degree of nonstoichiometry. We study controlled self-doping of TiO2 by adsorption of 1/8 and 1/16 monolayer Ti at the (110) surface using a combination of experimental and computational approaches to unravel the details of the adsorption process and the oxidation state of Ti. Upon adsorption of Ti, x-ray and ultraviolet photoemission spectroscopy (XPS and UPS) show formation of reduced Ti. Comparison of pure density functional theory (DFT) with experiment shows that pure DFT provides an inconsistent description of the electronic structure. To surmount this difficulty, we apply DFT corrected for on-site Coulomb interaction (DFT+U) to describe reduced Ti ions. The optimal value of U is 3 eV, determined from comparison of the computed Ti 3d electronic density of states with the UPS data. DFT+U and UPS show the appearance of a Ti 3d adsorbate-induced state at 1.3 eV above the valence band and 1.0 eV below the conduction band. The computations show that the adsorbed Ti atom is oxidized to Ti2+ and a fivefold coordinated surface Ti atom is reduced to Ti3+, while the remaining electron is distributed among other surface Ti atoms. The UPS data are best fitted with reduced Ti2+ and Ti3+ ions. These results demonstrate that the complexity of doped metal oxides is best understood with a combination of experiment and appropriate computations.