Der Antisemitismus : ein Krebsschaden, der am Marke unseres Volkslebens frißt

von J. Pestalozzi

Methylation of GpG Island promoters in uveal melanoma

ABSTRACT : Background: Inactivation of tumour-related genes by promoter hypermethylation is a common epigenetic event in the development of a variety of tumours. Aim: To investigate in primary uveal melanoma the status of promoter methylation of genes thought to be involved in tumour development: p16, TIMP3, RASSF1, RARB, FHIT, hTERT and APC. Methods: Gene promoter methylation was studied by methylation-sensitive single-strand conformation analysis and dot-blot assay in a series of 23 primary uveal melanomas. All DNA samples were obtained from paraffin-embedded formalin-fixed tissue blocks. Results: hTERT promoter methylation was found with a relatively high frequency (52%). Promoter methylation of p16, TIMP3, RASSF1, RARB, FHIT and APC was a rare event. For none of these genes did promoter methylation exceed 15% of tumour samples, and, for some genes (FHIT and APC), no methylation was found at all. Furthermore, promoter methylation was absent in 39% (9/ 23) of cases. In only 22% (5/23) of cases was hypermethylation of at least two promoters observed. Conclusions: Promoter methylation of hTERT is a regular event in uveal melanoma. Hypermethylation of the other genes studied does not seem to be an essential element in the development of this tumour. As promoter methylation of APC, RASSF1 and RARB is often observed in cutaneous melanoma, these results suggest that different epigenetic events occur in the development of cutaneous and uveal melanoma. RAPPORT DE SYNTHESE : L'inactivation de gènes par une hyperméthylation de leur promoteur apparaît être un événement épigénétique fréquent, se retrouvant dans de nombreuses tumeurs. Dans cette étude, nous avons investigué dans des mélanomes primaires de l'uvée l'état de méthylation du promoteur de gènes fréquemment impliqués dans le développent tumoral tels que p16, TIMP3, RASSFI, RARB, FHIT, hTERT et APC. La méthylation des promoteurs de gènes a été étudiée par methylationsensitive single-strand conformation analysis (MS-SSCA) et dot blot assay (MS-DBA) dans une série de 23 mélanomes primaires de l'uvée. Tous les échantillons tissulaires provenaient de matériel fixé dans le formol et conservé dans des blocs de parraffine. Nous avons identifié une fréquence relativement élevée (52%) pour la méthylation du promoteur de hTERT. En ce qui concerne le reste des gènes étudiés, nous avons retrouvé des fréquences de méthylation de promoteurs relativement basses avec 13% pour RASSF1, 13% pour RARB 13%, 9% pour TIMP3 et 4% pour p16. Nous n'avons pas retrouvé d'hyperméthylation des promoteurs des gènes APC et FRIT. La méthylation de hTERT apparaît être un événement important dans la biologie du mélanome de l'uvée. L'hyperméthylation des autres gènes évalués ne semble pas être cruciale dans le développent de cette tumeur. Comme la méthylation des promoteurs des gènes APC, RASSF1 et RARB a été fréquemment observée dans le mélanome de la peau, notre étude tend à démontrer que des mécanismes épigénétiques différents surviennent dans le développement respectif de ces tumeurs.

Continuous hydride generation in the presence of L- cysteine for the determination of arsenic, bismuth, antimony and tin in steels by inductively coupled plasma atomic emission spectrometry

Arsenic, bismuth, germanium, antimony and tin were simultaneously determined by continuous hydride generation and inductively coupled plasma-atomic emission spectrometry . I Hydrides were introduced into four different types of gas-liquid separators. Two of the gas-liquid separators were available in-house. A third was developed for this project and a fourth was based on a design used by CET AC. The best signal intensity was achieved by the type II frit-based gas-liquid separator, but the modified Cetac design gave promise for the future, due to low relative standard deviation. A method was developed for the determination of arsenic, bismuth, antimony and tin in low-alloy steels. Four standard reference materials from NIST were dissolved in 10 mL aqua regia without heat. Good agreement was obtained between experimental values and certified values for arsenic, bismuth, antimony and tin. The method was developed to provide the analyst with the opportunity to determine the analytes by using simple aqueous standards to prepare calibration lines. Within the limits of the samples analyzed, the method developed is independent of matrix.

Simple and effective technical procedures for the packing and application of nanospray PicoFrit HPLC columns for proteomic analyses

A simple procedure was developed for packing PicoFrit HPLC columns with chromatographic stationary phase using a reservoir fabricated from standard laboratory HPLC fittings. Packed columns were mounted onto a stainless steel ultra-low volume precolumn filter assembly containing a 0.5-mu m pore size steel frit. This format provided a conduit for the application of the nanospray voltage and protected the column from obstruction by sample material. The system was characterised and operational performance assessed by analysis of a range of peptide standards (n = 9).

Estudo de sistemas vítreos para infiltração em alumina

The system in-Ceram Alumina, produced by VITA, consists in a technique of prepare of a substructure of ceramics to dental crowns. First burning is made in the alumina decanted by slip casting process under a stone die that reproduces the tooth prepared to receive a crown. In a second burning, alumina is infiltrated by vitreous system, giving to this set a high mechanic resistance. In this work, it s made a study of the composition of a new infiltrating material more used nowadays, giving to alumina desirable mechanics proprieties to its using like substructure of support to ceramic s crown used in the market today. The addition of Lanthanum oxide (frit A) and calcium oxide (frit B) was made in attempt to increase the viscosity of LZSA and to reduce fusion temperature. The frits were put over samples of alumina and took to the tubular oven to 1400ºC under vacuum for two groups (groups 1 and 2). For another two groups (groups 3 and 4) it was made a second infiltration, following the same parameters of the first. A fifth group was utilized like group of control where the samples of pure alumina were not submitted to any infiltrating process. Glasses manifested efficient both in quality and results of analysis of mechanic resistance, being perfectly compatible with oral environment in this technical requisite. The groups that made a second infiltration had he best results of fracture toughness, qualify the use in the oral cavity in this technical question. The average of results achieved for mechanic resistance to groups 1, 2, 3, 4 and 5 were respectively 98 MPa, 90 MPa, 144 MPa, 236 MPa and 23 MPa

Crystallization of SiO2-CaO-Na2O Glass Using Sugarcane Bagasse Ash as Silica Source

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Obtenção, caracterização e aplicação de lipases vegetais

Pós-graduação em Ciências Biológicas (Botânica) - IBB

Obtaining lipases from byproducts of orange juice processing

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Velocity-density systematics for basalts at DSPD Leg 54 Holes

Precise velocity and density measurements at atmospheric and elevated pressures have been obtained on basalts drilled in 13 holes during Leg 54. The vp-sigma data show systematics which are controlled by the degree of crystallinity (or conversely, glassiness), microstructure, and original mineralogy and chemistry. Extensively fractionated basalts with marked iron enrichment produce anomalously low measured velocities at densities above 2.90 g/cm**3. Also, the effective in situ pressure acting on Leg 54 basalts is less than hydrostatic, and perhaps close to zero. At zero effective pressure, the measured velocities average 2.5 km/s higher than East Pacific Rise upper crustal velocities determined by seismic refraction. This implies that the in situ velocities are undoubtedly a result of the highly fragmented nature of East Pacific Rise crust.

Sobranīe sochinenīĭ.

Contents: 1. Otdi︠e︡l istoricheskīĭ -- 2. Otdi︠e︡l istoriko-topograficheskīĭ, arkheologicheskīĭ i ėtnograficheskīĭ -- 3. I︠A︡zykoznanīe, istorīi︠a︡ slovesnosti.

Chumat͡skii͡a narodnyi͡a pi͡esni.

Unaccompanied melodies, 3 leaves at end.

[A collection of stories and miscellaneous articles translated into Danish from English and other languages, including some articles written originally in Danish.]

Title supplied.

Pair of Eyes

Sculpture, Techniques, Greek; 1 1/2 in.x 2 1/64 in.; marble, frit, quartz, obisidan and bronze

Estudo de sistemas vítreos para infiltração em alumina

The system in-Ceram Alumina, produced by VITA, consists in a technique of prepare of a substructure of ceramics to dental crowns. First burning is made in the alumina decanted by slip casting process under a stone die that reproduces the tooth prepared to receive a crown. In a second burning, alumina is infiltrated by vitreous system, giving to this set a high mechanic resistance. In this work, it s made a study of the composition of a new infiltrating material more used nowadays, giving to alumina desirable mechanics proprieties to its using like substructure of support to ceramic s crown used in the market today. The addition of Lanthanum oxide (frit A) and calcium oxide (frit B) was made in attempt to increase the viscosity of LZSA and to reduce fusion temperature. The frits were put over samples of alumina and took to the tubular oven to 1400ºC under vacuum for two groups (groups 1 and 2). For another two groups (groups 3 and 4) it was made a second infiltration, following the same parameters of the first. A fifth group was utilized like group of control where the samples of pure alumina were not submitted to any infiltrating process. Glasses manifested efficient both in quality and results of analysis of mechanic resistance, being perfectly compatible with oral environment in this technical requisite. The groups that made a second infiltration had he best results of fracture toughness, qualify the use in the oral cavity in this technical question. The average of results achieved for mechanic resistance to groups 1, 2, 3, 4 and 5 were respectively 98 MPa, 90 MPa, 144 MPa, 236 MPa and 23 MPa