Fresamento de Eucalyptus grandis

The process of milling wood is widely used in operations such as planing and manufacturing frames . Machines like planers , desengrossadeiras , routers , moldureiras and machining centers employ the milling process for cutting wood . In this work the process of milling CNC machining center of Eucalyptus grandis was studied because this is very much used in furniture , but without consistent studies on this process . This work a CNC machining center brand TECH Z1 for analysis of surface quality ( Ra ) in relation to the variation of cutting speed and feed in concordant and discordant tangential milling and face milling was used . We used Eucalyptus grandis . Four forward speeds ( 3, 5 , 7, and 9 m / min ) for four shear rates ( 5,9; 8,4; 10,9 and 13,4 m/s ) were used. Was used for testing a cutter finishing top speed steel with helical teeth 16mm in diameter . 6 repetitions for each test condition were performed . From the results it was observed that the best results for roughness Vc = 10,9 m / s were obtained for the milling concordant with the forward speed Vf = 7 m / min. As for Vf = 5 m / min the best finish was achieved with Vc = 8,4 m /s in discordant for milling . The feedrate and cutting influenced the roughness . The senses of concordant and discordant and cut the top and the top had a significant difference in roughness

Análise do acabamento superficial e da potência consumida na usinagem de fresamento frontal e cilíndrico tangencial da madeira de eucalipto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Otimização do fresamento de roscas internas com a técnica de interpolação helicoidal

In machining of internal threads, dedicated tools, known as taps, are needed for each profile type, diameter, and low cutting speed values are used when compared to main machining processes. This restriction in the cutting speed is associated with the difficulty of synchronizing the tool s rotation speed and feed velocity in the process. This fact restricts the flexibility and makes machining lead times longer when manufacturing of components with threads is required. An alternative to the constraints imposed by the tap is the thread milling with helical interpolation technique. The technique is the fusion of two movements: rotation and helical interpolation. The tools may have different configurations: a single edge or multiple edges (axial, radial or both). However, thread milling with helical interpolation technique is relatively new and there are limited studies on the subject, a fact which promotes challenges to its wide application in the manufacturing shop floor. The objective of this research is determine the performance of different types of tools in the thread milling with helical interpolation technique using hardened steel workpieces. In this sense, four tool configurations were used for threading milling in AISI 4340 quenched and tempered steel (40 HRC). The results showed that climb cut promoted a greater number of machined threads, regardless of tool configuration. The upcut milling causes chippings in cutting edge, while the climb cutting promotes abrasive wear. Another important point is that increase in hole diameter by tool diameter ratio increases tool lifetime

Efeitos do teor de umidade da madeira no fresamento de Pinus Elliottii

Pós-graduação em Engenharia Mecânica - FEG

Estudo do fresamento de madeiras em centro de usinagem CNC

The lack of research related to wood machining processes, including the milling, as well as the increased use of this material in the industrial sector, it creates a need to increase research involving these processes, as the sector is in full technological and environmental remodeling. This paper studies the process of milling wood, presenting an analysis of the effects of cutting speed on surface quality by measuring roughness. We used a forward speed three cutting speeds, two species of wood (Pinus elliottii and Eucalyptus grandis) and two milling tools (roughing and finishing) machined by milling concordant and discordant. Each condition was repeated six times, and the measurements were performed in the opposite direction and in favor of cutting tool, generating results of the parameters Ra (average roughness) totaling 144 trials with it. These results were statistically analyzed using analysis of variance and Tukey test. Finally it was concluded that there are significant differences between the results of varying roughness when cutting speeds, milling and types of machining types tested

Fresamento de madeiras de média densidade: MDF

The technological expansion and market manufactured wood as wood paneling makes the research of processes involving this material are increasingly necessary . The present study examines the milling process MDF - fiberboard with average density endmill with helical teeth , with the analysis of the surface finish by evaluating the surface roughness ( Ra) and analysis of the power consumption . We analyzed three types of cuts in milling : concordant , discordant , and cut top . We used 5 rpm (6000 , 8000 , 10000 , 12000 and 14000 RPM) , establishing five-speed cutting, 301 , 402 ,502, 603 and 703 m / min respectively. Five forward speeds and 4, 6, 8, 10 and 12 m / min. Each condition was repeated six times , totaling 180 tests. The results of roughness were obtained from rugosimeter data and the power consumption were obtained by Hall-effect sensor . These results were statistically analyzed using analysis of variance and Tukey test . Finally it was concluded that there are few significant differences between the results themselves vary roughness when cutting speeds and feed and no major differences in power consumption . The best surface quality and lower power consumption were for cutting speed of 703 m / min . To varying forward speed , the speed of 4 m / min showed better surface quality and lower power consumption

Análise do processo de fresamento de MDF em centro de usinagem CNC

Pós-graduação em Engenharia Mecânica - FEG

Estudo da nitretação a plasma aplicada em ferramentas para fresamento

Este trabalho tem como objetivo estudar a influência do tratamento superficial, através da técnica de nitretação a plasma, no processo de fresamento com fresas de aço rápido AISI M2. Foram investigados os efeitos deste tratamento superficial no processo de corte, variando-se a forma de refrigeração/lubrificação das fresas com fluído de corte convencional (emulsão) em abundância, com minimização e sem fluído (lubrificação a seco). Na nitretação, a composição da mistura de gases utilizada nos experimentos foi de 5% N2 e 95% H2 em volume, a uma pressão de tratamento de 5 mbar (3,8 Torr). A temperatura utilizada foi de 440oC, durante um tempo de tratamento de 30 minutos, resultando em uma camada nitretada com uma zona de difusão com aproximadamente 8µm de profundidade. As ferramentas empregadas no processo de fresamento foram investigadas através de medição de forças de usinagem, medições de desgaste na superfície de incidência (flanco) e na superfície de saída (face), sendo as camadas nitretadas caracterizadas por metalografia óptica e microdureza. Foi observado um desempenho superior das fresas nitretadas apenas para as condições de corte a seco.

Aplicação de um sistema robótico utilizando recursos de sistemas CAD/CAM para o processo de fresamento

Sistemas produtivos industriais podem combinar, em células de manufatura, diferentes características de automação de processos permitindo interfaceamento e possibilitando a flexibilização e otimização da manufatura. Nos processos de fabricação, as dificuldades para a execução de processos de usinagem convencional ou mesmo através de comando numérico, quando se dispõe de máquinas adequadas para a fabricação de peças de geometrias complexas, podem limitar a criatividade, bem como dificultar o desenvolvimento do processo produtivo de forma otimizada. As dificuldades encontradas vão desde fixação das peças, necessidades de dispositivos especiais, restrições nos volumes de trabalho de máquinas CNC e mesmo a geração de trajetórias complexas para máquinas com limitações de eixos. Este trabalho propõe uma metodologia alternativa para usinagem, especialmente fresamento, com desenvolvimento de um algoritmo capaz de, através da utilização de recursos de sistemas CAD/CAM, traduzir arquivos gráficos para uma linguagem de programação utilizada em robôs. Na aplicação utilizam-se recursos dos sistemas CAD/CAM para gerar, numa primeira etapa, o código de programação para máquinas-ferramenta de comando numérico e posterior adaptação, para aplicação em sistemas robóticos. Informações de caminhos de ferramenta para usinagem em máquinas CNC são convertidos, através de uma interface computacional, em trajetórias a serem seguidas por uma ferramenta guiada por um manipulador de robô industrial. Os parâmetros de processo são também adequados as restrições dos sistemas robotizados. A viabilidade do sistema proposto é confirmada através de testes realizados em modelos de superfícies complexas, onde o objetivo do referido trabalho foi alcançado.

Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro

This work presents the results, analyses and conclusions about a study carried out with objective of minimizing the thermal cracks formation on cemented carbide inserts during face milling. The main focus of investigation was based on the observation that milling process is an interrupted machining process, which imposes cyclic thermal loads to the cutting tool, causing frequent stresses changes in its superficial and sub-superficial layers. These characteristics cause the formation of perpendicular cracks from cutting edge which aid the cutting tool wear, reducing its life. Several works on this subject emphasizing the thermal cyclic behavior imposed by the milling process as the main responsible for thermal cracks formation have been published. In these cases, the phenomenon appears as a consequence of the difference in temperature experienced by the cutting tool with each rotation of the cutter, usually defined as the difference between the temperatures in the cutting tool wedge at the end of the cutting and idle periods (T factor). Thus, a technique to minimize this cyclic behavior with objective of transforming the milling in an almost-continuous process in terms of temperature was proposed. In this case, a hot air stream was applied into the idle period, during the machining process. This procedure aimed to minimize the T factor. This technique was applied using three values of temperature from the hot air stream (100, 350 e 580 oC) with no cutting fluid (dry condition) and with cutting fluid mist (wet condition) using the hot air stream at 580oC. Besides, trials at room temperature were carried out. Afterwards the inserts were analyzed using a scanning electron microscope, where the quantity of thermal cracks generated in each condition, the wear and others damages was analyzed. In a general way, it was found that the heating of the idle period was positive for reducing the number of thermal cracks during face milling with cemented carbide inserts. Further, the cutting fluid mist application was effective in reducing the wear of the cutting tools.

A valiação da integridade superficial e usinabilidade de engrenagens forjadas utilizando fresamento com alta velocidade de corte

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da força de usinagem e energia específica de corte no fresamento com alta velocidade de corte

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo dos mecanismos governantes do efeito de escala na microusinagem

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito do fresamento com alta velocidade de corte na integridade superficial de aços ferríticos com grãos ultrafinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito do fresamento com alta velocidade de corte na usinabilidade de aços ferríticos com grãos ultrafinos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)