Some advances in study of crack identification problems

In the present paper, the crack identification problems are investigated. This kind of problems belong to the scope of inverse problems and are usually ill-posed on their solutions. The paper includes two parts: (1) Based on the dynamic BIEM and the optimization method and using the measured dynamic information on outer boundary, the identification of crack in a finite domain is investigated and a method for choosing the high sensitive frequency region is proposed successfully to improve the precision. (2) Based on 3-D static BIEM and hypersingular integral equation theory, the penny crack identification in a finite body is reduced to an optimization problem. The investigation gives us some initial understanding on the 3-D inverse problems.

A BIEM optimization method for fracture dynamics inverse problem

In the present paper, based on the theory of dynamic boundary integral equation, an optimization method for crack identification is set up in the Laplace frequency space, where the direct problem is solved by the author's new type boundary integral equations and a method for choosing the high sensitive frequency region is proposed. The results show that the method proposed is successful in using the information of boundary elastic wave and overcoming the ill-posed difficulties on solution, and helpful to improve the identification precision.

Mutation frequency of non-ESBL phenotype SENTRY (Asia-Pacific) isolates of Klebsiella pneumoniae conversion to an ESBL positive phenotype

Extended spectrum β-lactamases or ESBLs, which are derived from non-ESBL precursors by point mutation of β-lactamase genes (bla), are spreading rapidly all over the world and have caused considerable problems in the treatment of infections caused by bacteria which harbour them. The mechanism of this resistance is not fully understood and a better understanding of these mechanisms might significantly impact on choosing proper diagnostic and treatment strategies. Previous work on SHV β-lactamase gene, blaSHV, has shown that only Klebsiella pneumoniae strains which contain plasmid-borne blaSHV are able to mutate to phenotypically ESBL-positive strains and there was also evidence of an increase in blaSHV copy number. Therefore, it was hypothesised that although specific point mutation is essential for acquisition of ESBL activity, it is not yet enough, and blaSHV copy number amplification is also essential for an ESBL-positive phenotype, with homologous recombination being the likely mechanism of blaSHV copy number expansion. In this study, we investigated the mutation rate of non-ESBL expressing K. pneumoniae isolates to an ESBL-positive status by using the MSS-maximum likelihood method. Our data showed that blaSHV mutation rate of a non-ESBL expressing isolate is lower than the mutation rate of the other single base changes on the chromosome, even with a plasmid-borne blaSHV gene. On the other hand, mutation rate from a low MIC ESBL-positive (≤ 8 µg/mL for cefotaxime) to high MIC ESBL-positive (≥16 µg/mL for cefotaxime) is very high. This is because only gene copy number increase is needed which is probably mediated by homologous recombination that typically takes place at a much higher frequencies than point mutations. Using a subinhibitory concentration of novobiocin, as a homologous recombination inhibitor, revealed that this is the case.

Count-min sketches for estimating password frequency within Hamming distance two

The count-min sketch is a useful data structure for recording and estimating the frequency of string occurrences, such as passwords, in sub-linear space with high accuracy. However, it cannot be used to draw conclusions on groups of strings that are similar, for example close in Hamming distance. This paper introduces a variant of the count-min sketch which allows for estimating counts within a specified Hamming distance of the queried string. This variant can be used to prevent users from choosing popular passwords, like the original sketch, but it also allows for a more efficient method of analysing password statistics.

Technological tools for science classrooms : choosing and using for productive and sustainable teaching and learning experiences

In this age of rapidly evolving technology, teachers are encouraged to adopt ICTs by government, syllabus, school management, and parents. Indeed, it is an expectation that teachers will incorporate technologies into their classroom teaching practices to enhance the learning experiences and outcomes of their students. In particular, regarding the science classroom, a subject that traditionally incorporates hands-on experiments and practicals, the integration of modern technologies should be a major feature. Although myriad studies report on technologies that enhance students’ learning outcomes in science, there is a dearth of literature on how teachers go about selecting technologies for use in the science classroom. Teachers can feel ill prepared to assess the range of available choices and might feel pressured and somewhat overwhelmed by the avalanche of new developments thrust before them in marketing literature and teaching journals. The consequences of making bad decisions are costly in terms of money, time and teacher confidence. Additionally, no research to date has identified what technologies science teachers use on a regular basis, and whether some purchased technologies have proven to be too problematic, preventing their sustained use and possible wider adoption. The primary aim of this study was to provide research-based guidance to teachers to aid their decision-making in choosing technologies for the science classroom. The study unfolded in several phases. The first phase of the project involved survey and interview data from teachers in relation to the technologies they currently use in their science classrooms and the frequency of their use. These data were coded and analysed using Grounded Theory of Corbin and Strauss, and resulted in the development of a PETTaL model that captured the salient factors of the data. This model incorporated usability theory from the Human Computer Interaction literature, and education theory and models such as Mishra and Koehler’s (2006) TPACK model, where the grounded data indicated these issues. The PETTaL model identifies Power (school management, syllabus etc.), Environment (classroom / learning setting), Teacher (personal characteristics, experience, epistemology), Technology (usability, versatility etc.,) and Learners (academic ability, diversity, behaviour etc.,) as fields that can impact the use of technology in science classrooms. The PETTaL model was used to create a Predictive Evaluation Tool (PET): a tool designed to assist teachers in choosing technologies, particularly for science teaching and learning. The evolution of the PET was cyclical (employing agile development methodology), involving repeated testing with in-service and pre-service teachers at each iteration, and incorporating their comments i ii in subsequent versions. Once no new suggestions were forthcoming, the PET was tested with eight in-service teachers, and the results showed that the PET outcomes obtained by (experienced) teachers concurred with their instinctive evaluations. They felt the PET would be a valuable tool when considering new technology, and it would be particularly useful as a means of communicating perceived value between colleagues and between budget holders and requestors during the acquisition process. It is hoped that the PET could make the tacit knowledge acquired by experienced teachers about technology use in classrooms explicit to novice teachers. Additionally, the PET could be used as a research tool to discover a teachers’ professional development needs. Therefore, the outcomes of this study can aid a teacher in the process of selecting educationally productive and sustainable new technology for their science classrooms. This study has produced an instrument for assisting teachers in the decision-making process associated with the use of new technologies for the science classroom. The instrument is generic in that it can be applied to all subject areas. Further, this study has produced a powerful model that extends the TPACK model, which is currently extensively employed to assess teachers’ use of technology in the classroom. The PETTaL model grounded in data from this study, responds to the calls in the literature for TPACK’s further development. As a theoretical model, PETTaL has the potential to serve as a framework for the development of a teacher’s reflective practice (either self evaluation or critical evaluation of observed teaching practices). Additionally, PETTaL has the potential for aiding the formulation of a teacher’s personal professional development plan. It will be the basis for further studies in this field.

Choosing an appropriate index to construct dominance hierarchies in animal societies: a comparison of three indices

A plethora of indices have been proposed and used to construct dominance hierarchies in a variety of vertebrate and invertebrate societies, although the rationale for choosing a particular index for a particular species is seldom explained. In this study, we analysed and compared three such indices, viz Clutton-Brock et al.'s index (CBI), originally developed for red deer, Cervus elaphus, David's score (DS) originally proposed by the statistician H. A. David and the frequency-based index of dominance (FDI) developed and routinely used by our group for the primitively eusocial wasps Ropalidia marginata and Ropalidia cyathiformis. Dominance ranks attributed by all three indices were strongly and positively correlated for both natural data sets from the wasp colonies and for artificial data sets generated for the purpose. However, the indices differed in their ability to yield unique (untied) ranks in the natural data sets. This appears to be caused by the presence of noninteracting individuals and reversals in the direction of dominance in some of the pairs in the natural data sets. This was confirmed by creating additional artificial data sets with noninteracting individuals and with reversals. Based on the criterion of yielding the largest proportion of unique ranks, we found that FDI is best suited for societies such as the wasps belonging to Ropalidia, DS is best suited for societies with reversals and CBI remains a suitable index for societies such as red deer in which multiple interactions are uncommon. (C) 2009 The Association for the Study of Animal Behaviour. Published by Elsevier Ltd. All rights reserved.

Phase and amplitude reconstruction from a single carrier-frequency interferogram without phase unwrapping

A rapid algorithm for phase and amplitude reconstruction from a single spatial-carrier interferogram is proposed by bringing a phase-shifting mechanism into reconstruction of a carrier-frequency interferogram. The algorithm reconstructs phase through directly obtaining and integrating its real-value derivatives, avoiding a phase unwrapping process. The proposed method is rapid and easy to implement and is made insensitive to the profile of the interferogram boundaries by choosing a suitable integrating path. Moreover, the algorithm can also be used to reconstruct the amplitude of the object wave expediently without retrieving the phase profile in advance. The feasibility of this algorithm is demonstrated by both numerical simulation and experiment. (c) 2008 Optical Society of America.

Choosing the most suitable analogue redesign method for forward-type digital power converters

This work proposes a method to objectively determine the most suitable analogue redesign method for forward type converters under digital voltage mode control. Particular emphasis is placed on determining the method which allows the highest phase margin at the particular switching and crossover frequencies chosen by the designer. It is shown that at high crossover frequencies with respect to switching frequency, controllers designed using backward integration have the largest phase margin; whereas at low crossover frequencies with respect to switching frequency, controllers designed using bilinear integration have the largest phase margins. An accurate model of the power stage is used for simulation, and experimental results from a Buck converter are collected. The performance of the digital controllers is compared to that of the equivalent analogue controller both in simulation and experiment. Excellent correlation between the simulation and experimental results is presented. This work will allow designers to confidently choose the analogue redesign method which yields the greater phase margin for their application.

A simple method for choosing the parameters of a two degree-of-freedom tuned vibration absorber

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Because someone has recommended it - Patients’ reasons for choosing acupuncture or qigong

Question: Recent research has indicated a considerable contribution of placebo effects to the outcome of acupuncture treatments: especially patients’ expectations seem to have an influence [1] and [2]. In this context it is important to better understand the patient–practitioner relationship. The aim of this study was to investigate why patients in Switzerland choose acupuncture or qigong, and what they expect from the treatment and the practitioners [3]. Methods: A qualitative survey with open questions was performed among 38 patients newly enrolled for treatment in 7 different practices for Traditional Chinese Medicine ((TCM); 6 practices for acupuncture, 1 for qigong). Questions aimed to identify reasons for choosing TCM, knowledge about its range of indications, and patients’ expectations towards method and therapist. Answers were categorised and analysed by frequency. Results: The most common reasons for choosing TCM were recommendation by acquaintances, the idea of trying a new treatment and the perception of TCM as being a gentle method. The majority of respondents had poor knowledge about the range of conditions to be treated with TCM: pain of the musculoskeletal system, headaches and chronic problems were considered as main indications. Surprisingly, gynaecological or gastro-intestinal diseases were not mentioned by the respondents. Practitioners were expected to have professional competence, provide information, empathy and understanding. Conclusions: The most striking result of this survey was the fact that patients knew very little about TCM and its indications. Thus, more precise information about TCM and other complementary methods should be offered to the general public, which would help patients to decide whether to consider TCM for the treatment of their disease. And, on the other hand, for the therapists it is important to better understand and respond to patients’ expectations in order to achieve better treatment results. The results of this qualitative survey were briefly discussed with the participating practitioners, who found them remarkable and support further quantitative studies. We plan to further investigate this topic. References 1. J. Pariente, P. White, R.S.J. Frackowiak, G. Lewith. Neuroimage, 25 (2005), pp. 1161–1167 2. M. Karst, D. Schneidewind, D. Scheinichen. Forsch Komplementmed, 17 (2010), pp. 21–27 3. S.D. Klein. Dt Ztschr f Akup, 52 (2009), pp. 18–23

"Because someone has recommended it" - patients' reasons for choosing acupuncture or qigong

Background Recent research has indicated a considerable contribution of placebo effects to the outcome of acupuncture treatments: especially patients’ expectations seem to have an influence [1, 2]. In this context it is important to better understand the patient-practitioner relationship. The aim of this study was to investigate why patients in Switzerland choose acupuncture or qigong, and what they expect from the treatment and the practitioners [3]. Method A qualitative survey with open questions was performed among 38 patients newly enrolled for treatment in 7 different practices for Traditional Chinese Medicine ((TCM); 6 practices for acupuncture, 1 for qigong). Questions aimed to identify reasons for choosing TCM, knowledge about its range of indications, and patients’ expectations towards method and therapist. Answers were categorised and analysed by frequency. Results The most common reasons for choosing TCM were recommendation by acquaintances, the idea of trying a new treatment and the perception of TCM as being a gentle method. The majority of respondents had poor knowledge about the range of conditions to be treated with TCM: pain of the musculoskeletal system, headaches and chronic problems were considered as main indications. Surprisingly, gynaecological or gastro-intestinal diseases were not mentioned by the respondents. Practitioners were expected to have professional competence, provide information, empathy and understanding. Discussion The most striking result of this survey was the fact that patients knew very little about TCM and its indications. Thus, more precise information about TCM and other complementary methods should be offered to the general public, which would help patients to decide whether to consider TCM for the treatment of their disease. And, on the other hand, for the therapists it is important to better understand and respond to patients’ expectations in order to achieve better treatment results. The results of this qualitative survey were briefly discussed with the participating practitioners, who found them remarkable and support further quantitative studies. We plan to further investigate this topic. Literature 1 Pariente J et al., Neuroimage 2005;25:1161-67 2 Karst M et al., Forsch Komplementmed 2010;17:21-7 3 Klein SD., Dt Ztschr f Akup. 2009;52:18-23

The Choosing Healthy Options of Starches (CHOOS) diet and dietary intake self-monitoring for weight loss among adolescent females

Previous research has shown dietary intake self-monitoring, and culturally tailored weight loss interventions to be effective tools for weight loss. Technology can be used to tailor weight loss interventions to better suit adolescents. There is a lack of research to date on the use of personal digital assistants (PDAs) to self-monitor dietary intake among adolescents. The objective of this study was to determine the difference in dietary intake self-monitoring frequency between using a Personal Digital Assistant (PDA) or paper logs as a diet diary in obese adolescent females; and to describe differences in diet adherence, as well as changes in body size and self-efficacy to resist eating. We hypothesized dietary intake self-monitoring frequency would be greater during PDA use than during paper log use. This study was a randomized crossover trial. Participants recorded their diet for 4 weeks: 2 weeks on a PDA and 2 weeks on paper logs. Thirty-four obese females ages 12-20 were recruited for participation. Thirty were included in analyses. Participants recorded more entries/day while using the paper logs (4.10 entries/day ± 0.63) than while using the PDA (3.01 entries/day ±0.75) (p<0.001). Significantly more meals and snacks were skipped during paper log use (0.81/day ± 0.65) than during PDA use (0.23/day ± 0.22) (p=0.011). Changes in body size (BMI, weight, and waist circumference) and self-efficacy to resist eating did not differ significantly between PDA and paper log use. When compared to paper logs, participants felt the PDA was more convenient (p=0.020), looked forward to using the PDA more (p=0.008), and would rather continue using the PDA than the paper logs (p=0.020). The findings of this study indicate use of a PDA as a dietary intake self-monitoring tool among adolescents would not result in increased dietary intake self-monitoring to aid in weight loss. Use of paper logs would result in greater data returned to clinicians, though use of PDAs would likely get adolescents more excited about adhering to recommendations to record their diet. Future research should look at updated communication devices, such as cell phones and other PDAs with additional features, and the role they can play in increasing dietary intake self-monitoring among adolescents.^

Guideline-based decision support has a small, non-sustained effect on transthoracic echocardiography ordering frequency.

BACKGROUND: Guidance for appropriate utilisation of transthoracic echocardiograms (TTEs) can be incorporated into ordering prompts, potentially affecting the number of requests. METHODS: We incorporated data from the 2011 Appropriate Use Criteria for Echocardiography, the 2010 National Institute for Clinical Excellence Guideline on Chronic Heart Failure, and American College of Cardiology Choosing Wisely list on TTE use for dyspnoea, oedema and valvular disease into electronic ordering systems at Durham Veterans Affairs Medical Center. Our primary outcome was TTE orders per month. Secondary outcomes included rates of outpatient TTE ordering per 100 visits and frequency of brain natriuretic peptide (BNP) ordering prior to TTE. Outcomes were measured for 20 months before and 12 months after the intervention. RESULTS: The number of TTEs ordered did not decrease (338±32 TTEs/month prior vs 320±33 afterwards, p=0.12). Rates of outpatient TTE ordering decreased minimally post intervention (2.28 per 100 primary care/cardiology visits prior vs 1.99 afterwards, p<0.01). Effects on TTE ordering and ordering rate significantly interacted with time from intervention (p<0.02 for both), as the small initial effects waned after 6 months. The percentage of TTE orders with preceding BNP increased (36.5% prior vs 42.2% after for inpatients, p=0.01; 10.8% prior vs 14.5% after for outpatients, p<0.01). CONCLUSIONS: Ordering prompts for TTEs initially minimally reduced the number of TTEs ordered and increased BNP measurement at a single institution, but the effect on TTEs ordered was likely insignificant from a utilisation standpoint and decayed over time.