The influence of the alveolar ridge shape on the stress distribution in a free-end saddle removable partial denture supported by implant

The alveolar ridge shape plays an important role in predicting the demand on the support tooth and alveolar bone in the removable partial denture (RPD) treatment. However, these data are unclear when the RPD is associated with implants. This study evaluated the influence of the alveolar ridge shape on the stress distribution of a free-end saddle RPD partially supported by implant using 2-dimensioanl finite element analysis (FEA). Four mathematical models (M) of a mandibular hemiarch simulating various alveolar ridge shapes (1-distal desceding, 2- concave, 3-horizontal and 4-distal ascending) were built. Tooth 33 was placed as the abutment. Two RPDs, one supported by tooth and fibromucosa (MB) and other one supported by tooth and implant (MC) were simulated. MA was the control (no RPD). The load (50N) were applied simultaneously on each cusp. Appropriate boundary conditions were assigned on the border of alveolar bone. Ansys 10.0 software was used to calculate the stress fields and the von Mises equivalent stress criteria (σvM) was applied to analyze the results. The distal ascending shape showed the highest σvM for cortical and medullar bone. The alveolar ridge shape had little effect on changing the σvM based on the same prosthesis, mainly around the abutment tooth.

T-Bar clasp-retained removable partial denture as an alternative to implant-based prosthetic treatment

This article reports the case of a 55-year-old female patient who presented with unsatisfactory temporary crowns in the right mandibular premolars and molars, and a premolar-to-molar fixed partial denture in the left side. The clinical and radiographic examinations revealed a fracture of the left first premolar that was a retainer of the fixed partial denture and required extraction. Initially, the acrylic resin crowns were replaced by new ones, and a provisional RPD was made using acrylic resin and orthodontic wire clasps to resolve the problem arising from the loss of the fixed partial denture. Considering the patient's high esthetic demands, the treatment options for the definitive prosthetic treatment were discussed with her and rehabilitation with implant-supported dentures was proposed because the clinical conditions of the residual alveolar ridge were suitable for implant installation, and the patient's general health was excellent. However, the patient did not agree because she knew of a failed case of implant-retained denture in a diabetic individual and was concerned. The patient was fully informed that implant installation was the best indication for her case, but the arguments were not sufficient to change her decision. The treatment possibilities were presented and the patient opted for a clasp-retained removable partial denture (RPD) associated with the placement of crowns in the pillar teeth. The temporary RPD was replaced by the definitive RPD constructed subsequently. Although RPD was not the first choice, satisfactory esthetic and functional outcomes were achieved, overcaming the patient's expectations. This case report illustrates that the dentist must be prepared to deal with situations where, for reasons that cannot be managed, the patient does not accept the treatment considered as the most indicated for his/her case. Alternatives must be proposed and the functional and esthetic requirements must be fulfilled in the best possible manner.

Periodontal ligament influence on the stress distribution in a removable partial denture supported by implant: a finite element analysis

Objective: The non-homogenous aspect of periodontal ligament (PDL) has been examined using finite element analysis (FEA) to better simulate PDL behavior. The aim of this study was to assess, by 2-D FEA, the influence of non-homogenous PDL on the stress distribution when the free-end saddle removable partial denture (RPD) is partially supported by an osseointegrated implant. Material and Methods: Six finite element (FE) models of a partially edentulous mandible were created to represent two types of PDL (non-homogenous and homogenous) and two types of RPD (conventional RPD, supported by tooth and fibromucosa; and modified RPD, supported by tooth and implant [10.00x3.75 mm]). Two additional FE models without RPD were used as control models. The non-homogenous PDL was modeled using beam elements to simulate the crest, horizontal, oblique and apical fibers. The load (50 N) was applied in each cusp simultaneously. Regarding boundary conditions the border of alveolar ridge was fixed along the x axis. The FE software (Ansys 10.0) was used to compute the stress fields, and the von Mises stress criterion (sigma vM) was applied to analyze the results. Results: The peak of sigma vM in non-homogenous PDL was higher than that for the homogenous condition. The benefits of implants were enhanced for the non-homogenous PDL condition, with drastic sigma vM reduction on the posterior half of the alveolar ridge. The implant did not reduce the stress on the support tooth for both PDL conditions. Conclusion: The PDL modeled in the non-homogeneous form increased the benefits of the osseointegrated implant in comparison with the homogeneous condition. Using the non-homogenous PDL, the presence of osseointegrated implant did not reduce the stress on the supporting tooth.

Avaliação da influência da angulação do implante osseointegrado associado à prótese parcial removível classe I mandibular pelo método dos elementos finitos

Pós-graduação em Odontologia - FOA

Prótese parcial removível de extremidade livre associada a um implante osseointegrado: influência do ligamento periodontal na distribuição interna das tensões

Pós-graduação em Odontologia - FOA

Influência do formato do rebordo alveolar na distribuição interna das tensões em prótese parcial removível dento-implantossuportada

Pós-graduação em Odontologia - FOA

Avaliação da desadaptação das selas de próteses parciais removíveis após 1 a 5 anos de uso

The non-adaptation of the removable partial prosthesis (RPP) base to fibromucosal tissue is caused by resorption of residual ridges (RRR). The onset of bone resorption, which occurs after tooth extraction and continues throughout life, is accelerated by local or systemic factors. Aim: Assess the degree of non-adaptation of removable partial prosthesis saddles and the factors that influence it. Methodology: A sectional study was conducted with 81 patients using RPP who had their prostheses installed between 2003 and 2007 (1 to 5 years of use) at the Faculty of Dentistry of the Universidade Federal do Rio Grande do Norte (UFRN). After anamnese and clinical examination, a cast was made with polyether-based material, using the base of the prosthesis to make the impression. The base of the saddle was loaded with the casting material and positioned in the mouth, applying pressure on the supports. After polymerization, the material was removed from the saddle and measurements were taken at 3 different points using a pachymeter. Results: The non-adaptation of the saddle increased significantly with years of use (p = 0.005). The tooth-tissue supported prostheses obtained higher mean non-adaptation values than those of tooth supported prostheses (p < 0.001). Flaccid mucosa showed the worst non-adaptation results, which were statistically different from resilient mucosa (p < 0.001). The greater the extension of the saddle, the greater the non-adaptation (p < 0.001). The natural tooth antagonistic arch yielded better results than did RPP and total prosthesis (p < 0.001). Saddle non-adaptation at the free end was less near the pillar tooth and greater in the more posterior region (p < 0.001). When adaptation of the supports to the niches was poor, greater saddle non-adaptation occurred than when it was good or fair (p < 0.001). Saddles located in the posterior region of the arch had greater non-adaptation than those in the anterior region (p = 0.023). Conclusion: The mean non-adaptation of the saddle to the residual ridges was 0.27 mm. It can be concluded that, even with the use of RPP, bone height reduction was slight within the 1-5-year period of use. The following are factors that influence adaptation of the RPP saddle base: years of use, age, force transmission path to the alveolar bone, location of the toothless area, antagonistic arch, type of mucosa, adaptation of supports to the niche and extension of the saddle

Limb constriction as a complication of intra-uterine vesico-amniotic shunt: Fetoscopic release

Complete fetal bladder outlet obstruction was first diagnosed in a fetus at 13.5 weeks. After sequential vesico-centesis had shown good renal function, a vesico-amniotic shunt was inserted at 17 weeks with a Rodeck catheter. The procedure was successful and amniotic fluid volume re-accumulated to normal levels. A detailed scan at 20 weeks showed that the distal free end of the catheter was wound round the left fetal thigh. As the fetus grew, there was progressive constriction of the fetal thigh by the catheter. By 29 weeks, Doppler blood flow changes to the left leg were apparent. Fetoscopic surgery was performed at 30 weeks to release the constriction. The catheter was divided successfully, but the divided end of the shunt subsequently retracted into the fetal abdomen, producing urinary ascites, bilateral hydroureter and hydronephrosis. The baby was delivered at 31.5 weeks in good condition. Endoscopic resection of anterior and posterior urethral valves was performed at 6 months of age. At 2 years, the child has normal renal function, growth parameters and developmental milestones. Mild indentation of the left thigh was still apparent, although there was no functional impairment. Copyright (C) 2002 S. Karger AG, Basel.

Salvage Flexor Hallucis Longus Transfer for a Failed Achilles Repair: Endoscopic Technique

Flexor hallucis longus (FHL) transfer is a well-established treatment option in failed Achilles tendon (AT) repair and has been routinely performed as an open procedure. We detail the surgical steps needed to perform an arthroscopic transfer of the FHL for a chronic AT rupture. The FHL tendon is harvested as it enters in its tunnel beneath the sustentaculum tali; a tunnel is then drilled in the calcaneus as near to the AT footprint as possible. By use of a suture-passing device, the free end of the FHL is advanced to the plantar aspect of the foot. After adequate tension is applied to the construct, the tendon is fixed in place with an interference screw in an inside-out fashion. This minimally invasive approach is a safe and valid alternative to classic open procedures with the obvious advantages of preserving the soft-tissue envelope and using a biologically intact tendon.

Observation on the morphology of Australorbis glabratus

The present morphological study of A. glabratus was based on the observation of shell, radula, renal region and genitalia of 50 specimens having a shell diameter of 18 mm. In this summary we record the data pertaining to the chracteristics that can be used in systematics. The numerals refere to the mean and their standard deviation; no special reference being made, they correspond to length measurements. Shell: 18 mm in diameter, 5.59 ± 0.24 mm in greatest width, 5 to 6 whorls. Right side umbilicated, left one weakly depressed. Last whorl about thrice as tall as the penultimate one at the aperture, the measurements being taken on the right side. Aperture perpendicular or a little oblique. Body, extended: 47.06 ± 3.31 mm. Renal tube: Narrow and elongated, 23.84 ± 1.90 mm, showing a pigmented ridge along its ventral surface. Ovotestis: 12.78 ± 1.50 mm. Mainly trifurcate diverticula attaching in fan-like manner to the collecting canal (this arrangement is seen to best advantage in the cephalic middle of the ovotestis). The collecting canal greatly swells at the cephalic end, narrowing suddenly as it leaves the ovotestis. Ovisperm duct: 13.70 ± 1.68 mm, including the non-unwound seminal vesicle. The latter, situated about 1 mm from the beginning af the ovisperm duct, was 1.14 ± 0.29 mm in greatest diameter, and is beset by numerous short diverticula. Sperm duct: 14.16 ± 1.27 mm, pursuing a sinous course along the oviduct. Prostate: Prostate duct 5.53 ± 0.74 mm, collecting a row of long diverticula, the latter 21.6 ± 3.5 in number. Last diverticulum generally simple or bifurcate, penultimate generally arborescent, bifurcate or simple, antepenultimate nearly always arborescent, the remaining ones arborescent. The arborescent diverticula frequently give off secondary branches. Vas deferens: 17.50 ± 2.05 mm. The ratio vas deferens/vergic sac was 4.7 ± 0.6. Verge: 3.70 ± 0.54 mm long, 0.12 ± 0.03 mm wide. Free end tapering to a point where the sperm canal opens. No penial stylet. Vergic sac: 3.77 ± 0.50 mm long, 0.19 ± 0.01 mm wide. The length ratio vergic sac/preputium was 1 ± 0.02. Preputium: Deeply pigmented, 3.79 ± 0.40 mm long, 0.89 ± 0.12 mm wide in the middle. Muscular diaphragm between it and the vergic sac. Two muscular pilasters along its lateral walls. Oviduct: 10.24 ± 1.29 mm, suddenly swollen at the cephalic end so that it forms a folded pouch capping the beginning of the uterus. Uterus: 10.58 ± 1.18 mm. Vagina: 2.06 ± 0.15 mm long, 0.32 ± 0.05 mm wide, showing a swelling at its caudal portion, just above the opening of the spermathecal duct. Spermatheca: 1.57 ± 0.41 mm long, 0.92 ± 0.23 mm wide. Spermathecal duct 1.15 ± 0.23 mm. Radula: 125 to 163 rows of teeth (mean 141.4 ± 9.8). Radula formula 27-1-27 to 34-1-34 (mean 30.9 ± 1.7).

Processus post-transcriptionnels inédits dans la mitochondrie des diplonémides

Notre laboratoire a récemment découvert un mode d’expression des gènes mitochondriaux inédit chez le protozoaire biflagellé Diplonema papillatum. Outre son ADNmt formé de centaines de chromosomes circulaires, ses gènes sont fragmentés. Le gène cox1 qui code pour la sous unité I de la cytochrome oxydase est formé de neuf modules portés par autant de chromosomes. L’ARNm de cox1 est obtenu par épissage en trans et il est également édité par insertion de six uridines entre deux modules. Notre projet de recherche a porté sur une étude globale des processus post-transcriptionnels du génome mitochondrial de diplonémides. Nous avons caractérisé la fragmentation de cox1 chez trois autres espèces appartenant aux deux genres du groupe de diplonémides à savoir : Diplonema ambulator, Diplonema sp. 2 et Rhynchopus euleeides. Le gène cox1 est fragmenté en neuf modules chez tous ces diplonémides mais les modules sont portés par des chromosomes de taille et de séquences différentes d’une espèce à l’autre. L’étude des différentes espèces a aussi montrée que l’édition par insertion de six uridines entre deux modules de l’ARNm de cox1 est commune aux diplonémides. Ainsi, la fragmentation des gènes et l’édition des ARN sont des caractères communs aux diplonémides. Une analyse des transcrits mitochondriaux de D. papillatum a permis de découvrir quatre autres gènes mitochondriaux édités, dont un code pour un ARN ribosomique. Donc, l'édition ne se limite pas aux ARNm. De plus, nous avons montré qu’il n’y a pas de motifs d’introns de groupe I, de groupe II, de type ARNt ou d’introns impliqués dans le splicéosome et pouvant être à l’origine de l’épissage des modules de cox1. Aucune complémentarité significative de séquence n’existe entre les régions flanquantes de deux modules voisins, ni de résidus conservés au sein d’une espèce ou à travers les espèces. Nous avons donc conclu que l’épissage en trans de cox1 chez les diplonémides fait intervenir un nouveau mécanisme impliquant des facteurs trans plutôt que cis. L’épissage et l’édition de cox1 sont dirigés probablement par des ARN guides, mais il est également possible que les facteurs trans soient des molécules protéiques ou d’ADN. Nous avons élucidé les processus de maturation des transcrits mitochondriaux de D. papillatum. Tous les transcrits subissent trois étapes coordonnées et précises, notamment la maturation des deux extrémités, l’épissage, la polyadénylation du module 3’ et dans certains cas l’édition. La maturation des extrémités 5’ et 3’ se fait parallèlement à l’épissage et donne lieu à trois types d’intermédiaires. Ainsi, un transcrit primaire avec une extrémité libre peut se lier à son voisin. Cet épissage se fait apparemment sans prioriser un certain ordre temporel alors que dans le cas des transcrits édités, l’édition précède l`épissage. Ces études donnant une vue globale de la maturation des transcrits mitochondriaux ouvrent la voie à des analyses fonctionnelles sur l’épissage et l’édition chez D. papillatum. Elles sont le fondement pour finalement élucider les mécanismes moléculaires de ces deux processus post-transcriptionnels de régulation dans ce système intriguant.

Large deviations of Rouse polymer chain: first passage problem

The purpose of this paper is to investigate several analytical methods of solving first passage (FP) problem for the Rouse model, a simplest model of a polymer chain. We show that this problem has to be treated as a multi-dimensional Kramers' problem, which presents rich and unexpected behavior. We first perform direct and forward-flux sampling (FFS) simulations, and measure the mean first-passage time $\tau(z)$ for the free end to reach a certain distance $z$ away from the origin. The results show that the mean FP time is getting faster if the Rouse chain is represented by more beads. Two scaling regimes of $\tau(z)$ are observed, with transition between them varying as a function of chain length. We use these simulations results to test two theoretical approaches. One is a well known asymptotic theory valid in the limit of zero temperature. We show that this limit corresponds to fully extended chain when each chain segment is stretched, which is not particularly realistic. A new theory based on the well known Freidlin-Wentzell theory is proposed, where dynamics is projected onto the minimal action path. The new theory predicts both scaling regimes correctly, but fails to get the correct numerical prefactor in the first regime. Combining our theory with the FFS simulations lead us to a simple analytical expression valid for all extensions and chain lengths. One of the applications of polymer FP problem occurs in the context of branched polymer rheology. In this paper, we consider the arm-retraction mechanism in the tube model, which maps exactly on the model we have solved. The results are compared to the Milner-McLeish theory without constraint release, which is found to overestimate FP time by a factor of 10 or more.

Maxillary complete denture movement during chewing in mandibular removable partial denture wearers

To evaluate the pattern of maxillary complete denture movement during chewing for free-end removable partial dentures (RPD) wearers, compared to maxillary and mandibular complete denture wearers. Eighteen edentulous participants (group I) and 10 volunteers with bilateral posterior edentulous mandibles (group II) comprised the sample. Measures of mean denture movement and its variability were obtained by a kinesiographic instrument K6-I Diagnostic System, during the mastication of bread and a polysulphide block. Data were analysed using two-way anova (alpha = 0.05). Upper movement during chewing was significantly lower for group II, regardless of the test food. The test food did not influence the vertical or lateral position of the denture bases, but more anterior dislocation was found when polysulphide blocks were chewed. Group II presented lower intra-individual variability for the vertical axis. Vertical displacement was also more precise with bread as a test food. It can be concluded that mandibular free-end RPD wearers show smaller and more precise movements than mandibular complete denture wearers.

Falhas e complicações com o uso de prótese parcial removível inferior de extremidade livre bilateral

Aim: To determine the frequency and type of complications related to removable partial denture (RPD) less, Kennedy Class I, over time . Materials and Methods: This observational study consisted of a sample of 65 users PPR lower arches in Kennedy Class I and dentures, rehabilitated in the Department of Dentistry, Federal University of Rio Grande do Norte (UFRN). Patients were followed through periodic controls during periods of 60 days, 6 months and 1 year from installation. After the first year of control had other returns annually. The occurrence of complications or prosthetic failure was observed and recorded in a specific clinical record over 39 months. The patterns of failures observed were classified in the following situations: occurrence of traumatic ulcers after 2 months of installation, lack of retention, fracture or caries in the rest, fracture or dislocation of the artificial teeth, the larger connector fracture, fracture clip fracture support, poor support (need to reline the denture) and prosthesis fracture. Results: The incidence of complications was low frequency, being higher in the second year of use of the prosthesis. Among the complications that occurred more is the loss of retention (31.57%). Failures more severe and difficult to solve as the fracture elements of the metal structure of the PPR had low occurrence and were represented by only one case of the larger connector (5.3%) fractures. Conclusion: Removable partial dentures mandibular free end opposing of the conventional dentures have a low complication rate after 39 months of use when subjected to periodic controls