The attentional modulation of the flash-lag effect

If a dot is flashed in perfect alignment with a pair of dots rotating around the visual fixation point, most observers perceive the rotating dots as being ahead of the flashing dot (flash-lag effect). This perceptual effect has been interpreted to result from the perceptual extrapolation of the moving dots, the differential visual latencies between flashing and moving stimuli, as well as the modulation of attentional mechanisms. Here we attempted to uncouple the attentional effects brought about by the spatial predictability of the flashing dot from the sensory effects dependent on its visual eccentricity. The stimulus was a pair of dots rotating clockwise around the fixation point. Another dot was flashed at either the upper right or the lower left of the visual field according to three separate blocked situations: fixed, alternate and random positions. Twenty-four participants had to judge, in all three situations, the location of the rotating dots in relation to the imaginary line connecting the flashing dot and the fixation point at the moment the dot was flashed. The flash-lag effect was observed in all three situations, and a clear influence of the spatial predictability of the flashing dot on the magnitude of the perceptual phenomenon was revealed, independently of sensory effects related to the eccentricity of the stimulus in the visual field. These findings are consistent with our proposal that, in addition to sensory factors, the attentional set modulates the magnitude of the differential latencies that give rise to the flash-lag phenomenon.

A psychophysical and computational analysis of the spatio-temporal mechanisms underlying the flash-lag effect

Several accounts put forth to explain the flash-lag effect (FLE) rely mainly on either spatial or temporal mechanisms. Here we investigated the relationship between these mechanisms by psychophysical and theoretical approaches. In a first experiment we assessed the magnitudes of the FLE and temporal-order judgments performed under identical visual stimulation. The results were interpreted by means of simulations of an artificial neural network, that wits also employed to make predictions concerning the F LE. The model predicted that a spatio-temporal mislocalisation would emerge from two, continuous and abrupt-onset, moving stimuli. Additionally, a straightforward prediction of the model revealed that the magnitude of this mislocalisation should be task-dependent, increasing when the use of the abrupt-onset moving stimulus switches from a temporal marker only to both temporal and spatial markers. Our findings confirmed the model`s predictions and point to an indissoluble interplay between spatial facilitation and processing delays in the FLE.

Absence of flash-lag when judging global shape from local positions

When a flash is presented aligned with a moving stimulus, the former is perceived to lag behind the latter (the flash-lag effect). We study whether this mislocalization occurs when a positional judgment is not required, but a veridical spatial relationship between moving and flashed stimuli is needed to perceive a global shape. To do this, we used Glass patterns that are formed by pairs of correlated dots. One dot of each pair was presented moving and, at a given moment, the other dot of each pair was flashed in order to build the Glass pattern. If a flash-lag effect occurs between each pair of dots, we expect the best perception of the global shape to occur when the flashed dots are presented before the moving dots arrive at the position that physically builds the Glass pattern. Contrary to this, we found that the best detection of Glass patterns occurred for the situation of physical alignment. This result is not consistent with a low-level contribution to the flash-lag effect.

Characteristics of motor resonance predict the pattern of flash-lag effects for biological motion

Background - When a moving stimulus and a briefly flashed static stimulus are physically aligned in space the static stimulus is perceived as lagging behind the moving stimulus. This vastly replicated phenomenon is known as the Flash-Lag Effect (FLE). For the first time we employed biological motion as the moving stimulus, which is important for two reasons. Firstly, biological motion is processed by visual as well as somatosensory brain areas, which makes it a prime candidate for elucidating the interplay between the two systems with respect to the FLE. Secondly, discussions about the mechanisms of the FLE tend to recur to evolutionary arguments, while most studies employ highly artificial stimuli with constant velocities. Methodology/Principal Finding - Since biological motion is ecologically valid it follows complex patterns with changing velocity. We therefore compared biological to symbolic motion with the same acceleration profile. Our results with 16 observers revealed a qualitatively different pattern for biological compared to symbolic motion and this pattern was predicted by the characteristics of motor resonance: The amount of anticipatory processing of perceived actions based on the induced perspective and agency modulated the FLE. Conclusions/Significance - Our study provides first evidence for an FLE with non-linear motion in general and with biological motion in particular. Our results suggest that predictive coding within the sensorimotor system alone cannot explain the FLE. Our findings are compatible with visual prediction (Nijhawan, 2008) which assumes that extrapolated motion representations within the visual system generate the FLE. These representations are modulated by sudden visual input (e.g. offset signals) or by input from other systems (e.g. sensorimotor) that can boost or attenuate overshooting representations in accordance with biased neural competition (Desimone & Duncan, 1995).

Lag-time effects on a naturally ventilated large thermometer screen

Systematic natural ventilation effects on measured temperatures within a standard large wooden thermometer screen are investigated under summer conditions, using well-calibrated platinum resistance thermometers. Under low ventilation (2mwind speed u2 < 1.1 m s−1), the screen slightly underestimates daytime air temperature but overestimates air temperature nocturnally by 0.2◦C. The screen’s lag time L lengthens with decreasing wind speed, following an inverse power law relationship between L and u2. For u2 > 2 m s−1, L ∼ 2.5 min, increasing, when calm, to at least 15 min. Spectral response properties of the screen to air temperature fluctuations vary with wind speed because of the lag changes. Ventilation effects are particularly apparent at the higher (>25◦C) temperatures, both through the lag effect and from solar heating. For sites where wind speed decreases with increasing daytime temperature, thermometer screen temperatures may consequently show larger uncertainties at the higher temperatures. Under strong direct beam solar radiation (>850W m−2) the radiation effect is likely to be <0.4◦C. Copyright c 2011 RoyalMeteorological Society

An Analysis of OWI Arrests and Convictions in Iowa, 2011

The primary goal of the project was to document the demographic profile of OWI offenders in Iowa. The study is based on both aggregate and case-level data. The case level data produced a final sample of 118,675 OWI convictions. That occurred from 2000 through 2009. The great majority of convicted offenders were White males. From 2000 through 2009 the percentage of convictions received by women increased by 34%. Defendants’ average age of was 30 years old, and the age cohorts of 15 to 24, 25 to 34, and 34 to 45 were overrepresented among convicted offenders. Whites were underrepresented among OWI defendants. African Americans, Hispanics and Native Americans were overrepresented. From 2000 through 2009, the percentage of aggravated misdemeanor felony OWI convictions received by Hispanics and African Americans increased significantly. The percentage of OWI convictions received by women and African Americans increased significantly after implementation of the .08 BAC law. We did not find convincing evidence of a direct relationship between enforcement trends and the alcohol related traffic fatalities (ARTFs). However, the ten year Iowa conviction trends did provide evidence of a conviction lag effect on Iowa’s ARTFs. The research findings established the basis for a phase two project that would assess the efficacy of OWI sentencing practices in Iowa.

The use of relaxation therapy as an adjunct to traditional psoriasis therapy /

This research investigated the impact of stress management and relaxation techniques on psoriasis. It had a dual purpose to see if stress management and relaxation techniques, as an adjunct to traditional medical treatment, would improve the skin condition of psoriasis. In addition it attempted to provide psoriasis patients with a sense of control over their illness by educating them about the connection between mind and body through learning stress management and relaxation techniques. The former purpose was addressed quantitatively, while the latter was addressed qualitatively. Using an experimental design, the quantitative study tested the efficacy of stress management and relaxation techniques on 38 dermatological patients from St. John's, Newfoundland. The study which lasted ten weeks, suggested a weak relationship between psoriasis and stress. These relationships were not statistically significant. The qualitative data were gathered through unstructured interviews and descriptive/interpretative analysis was used to evaluate them. Patients in the experimental group believed in the mind body connection as it related to their illness and stress. The findings also showed that the patients believed that the stress reduction and relaxation techniques improved their quality of life, their level of psoriasis, and their ability to live with the condition. Based on the contradictory nature of the findings, further research is needed. It is posited that replication of this study would be vastly improved by increasing the sample size to increase the possibility of significant findings. As wel~ increasing the length of time for the experiment would control for the possibility of a lag effect. Finally, the study looked at linear relationships between stress and psoriasis. Further study should ascertain whether the relationship might be nonlinear

Temporal patterns of memory source incorporations into dreams and their relationships to dreamed locus of control

Les incorporations des mémoires épisodiques dans les rêves apparaissent en formes fragmentées et suivent un modèle temporel distinct qui suit une courbe sinusoïdale. Ce modèle est caractérisé par les incorporations immédiates, qui apparaissent 1-2 jours après l’événement (effet de résidus diurnes), et les incorporations tardives, qui apparaissent 5-7 jours après l’événement (effet de délai). Ces deux effets sont considérés comme des liens entre les processus de consolidation de la mémoire et la formation du rêve. Cette courbe temporelle a été observée pour une variété de stimuli expérimentaux. Cependant, aucune étude à date n’a démontré que le contenu des rêves réagit aux événements diurnes d’une manière plus générale et non-spécifique. Le but de notre étude était d’examiner si deux événements qualitativement distincts, un séjour nocturne au laboratoire (LAB), considéré comme un événement interpersonnel, et une tâche de réalité virtuelle (RV), considérée comme un événement non-interpersonnel, sont intégrés de façon différente dans le contenu onirique. Selon nos hypothèses, 1) les éléments spécifiques liés au LAB et à RV seraient incorporés dans les rêves avec des patrons tendances temporels différents, et 2) les incorporations spécifiques seraient associées à des changements plus généraux dans le locus de contrôle (LoC) du rêve. Vingt-six participants ont passé une nuit dans le laboratoire, ont été exposé à une tâche de RV, et ont rempli un journal de rêve pendant 10 jours. Les rapports de rêve ont été cotés pour les éléments spécifiques portant sur LAB et sur RV, et pour l'évolution générale de LoC du rêve. Nos deux hypothèses ont été confirmées: 1) les incorporations de LAB et RV sont négativement corrélées et apparaissent dans le rêve selon des modèles temporels différents. Les incorporations du LAB ont suivi une courbe sinusoïdale en forme de U, avec un effet de résidu diurne et un effet de délai. Les incorporations de RV ont suivi un patron différent, et ont eu un maximum d’incorporations au jour 4. 2) les scores du LoC du rêve étaient plus externes pour le jour 1 (max incorporations du LAB) et plus internes pour le jour 4 (max incorporations de RV). Ces modèles d'incorporation distincts peuvent refléter des différences dans la façon dont les deux événements ont été traités par les processus de consolidation de la mémoire. Dans ce cas, une expérience interpersonnelle (LAB) était incorporée plus tôt dans le temps. Les résultats suggèrent que LoC du rêve reflète les processus de mémoire plus généraux, qui affectent le contenu du rêve entier, et qui sont partiellement indépendants des incorporations spécifiques.

Impacto dos investimentos em tecnologia de informação no desempenho financeiro das indústrias brasileiras

Os resultados obtidos possibilitam afirmar que as indústrias que mais investiram em Tecnologia de Informação (TI), no período de 2001 a 2011, obtiveram maior crescimento da sua receita operacional e resultados operacionais mais eficazes, comparadas com as indústrias que investiram menos no período. De acordo com o modelo proposto, para as empresas estudadas foi possível encontrar, no prazo de dois anos, um crescimento de 7% no resultado operacional para cada 1% a mais de investimentos em TI. Destaca-se o objetivo da pesquisa de identificar e analisar os impactos dos gastos e investimentos em tecnologia de informação no desempenho financeiro das indústrias brasileiras, para alcançá-lo, adotou-se um modelo de pesquisa que utilizou métricas contábeis-financeiras e indicadores de uso TI, bem como a combinação de técnicas estatísticas para as análises. O trabalho aprofunda e amplia as discussões existentes sobre a avaliação dos investimentos em TI e como aferir o impacto desta sobre o desempenho organizacional. O universo do estudo foi composto pelas companhias brasileiras, de capital aberto, do ramo industrial, com ações ativas na BOVESPA, totalizando 119 companhias. Por meio de uma survey obteve-se os dados complementares referentes aos gastos e investimentos em TI; os questionários semiestruturados foram encaminhados diretamente ao Gerente de TI (Chief Information Officer). Estes esforços na coleta de dados primários possibilitaram a obtenção de uma amostra bastante significativa, com 63 indústrias, ou seja, 53% da população estudada. Após coleta, a análise dos dados foi desenvolvida em três etapas: (1) Análise Fatorial (AF) para seleção de fatores de desempenho que resultou no final do processo em doze variáveis para o modelo da pesquisa; (2) Análise de Cluster (AC) que evidenciou três agrupamentos distintos de indústrias por suas características e desempenho e (3) Regressão Múltipla que adotou um modelo econométrico dinâmico, estimado pelo Método dos Momentos Generalizado (GMM), satisfazendo as condições do modelo de Arellano-Bond (1991). Salienta-se que o modelo proposto permitiu tratar de forma adequada metodologicamente as correlações espúrias, possibilitando identificar que os gastos e investimentos em TI, (IGTI t-2), de dois períodos anteriores impactaram no Resultado Operacional Atual, (ROPt), evidenciando o efeito tardio, ou lag effect. Além disso, foi constatado que outras variáveis de rentabilidade e liquidez impactam neste resultado, também adotando defasagem das variáveis. A principal variável de TI da pesquisa, o IGTI, é calculada pela soma de gastos e investimentos em TI anuais (OPEX/CAPEX), dividida pela Receita Operacional Líquida anual. Para pesquisas futuras, há a possibilidade de buscar medidas de avaliação por tipos (categorias) de investimento em TI, visando ao aprofundamento da análise destes impactos no desempenho setorizado (ligado a cada investimento) e da análise de clusters, adotando o modelo de análise da pesquisa.

Auditive und visuelle Perzeption bei Abseitsentscheidungen im Fussball

Einleitung Die hohe Quote von fehlerhaften Abseitsentscheidungen im Fußball (ca. 26%, Helsen et al., 2006) könnte dadurch erklärt werden, dass Schiedsrichterassistenten zum Zeitpunkt des Passes die Abseitslinie fixieren und den Moment des Passes nur peripher wahr-nehmen (Catteeuw et al., 2009). Diese Annahme wurde geprüft, indem in einem Virtual-Reality-Setting systematisch visuelle (Spielerpositionen) und akustische (Passgeräusch) Informationen manipuliert wurden. Methode In Experiment 1 hatten 28 Teilnehmer die Aufgabe, Abseitsentscheidungen aus der Per-spektive des Schiedsrichterassistenten zu treffen. Dabei wurde das Passgeräusch mani-puliert (Geräusch bei Ballabgabe: 100 ms zu früh, 100 ms zu spät, ohne). Erwartet wurde, dass die Entscheidungsrichtigkeit bei asynchronen Geräuschen sinkt. In Experiment 2 wurde in drei Gruppen die (1) Distanz zum Assistent, (2) Exzentrizität des Passgebers (Winkel zwischen Passgeber und Abseitslinie) oder (3) der zu fixierende Spieler (letzter Verteidiger oder Passgeber) manipuliert. Je Gruppe hatten 20 Teilnehmer die Aufgabe, den Moment des Passes per Knopfdruck anzugeben und Abseitsentscheidungen zu tref-fen. Zu fixierende Orte wurden instruiert und durch Eyetracking geprüft. Prädiziert wurde, dass (1) große Exzentrizitäten und (2) große Entfernungen des Passgebers die Präzision der Passwahrnehmung und die Entscheidungsrichtigkeit senken und (3) der Passmo-ment bei Fixation des Passgebers präziser erkannt wird als bei Fixation des letzten Ver-teidigers. Ergebnisse Die bisher vorliegenden Ergebnisse aus Experiment 1 zeigen, dass die akustische Wahrnehmung des Passes die Entscheidungsrichtigkeit beeinflusst, F(2, 54)= 7.44, p = .01, ηp2 = .22, indem verzögerte Ballgeräusche die Zahl der „Flag-Errors“ (fälschlicher-weise auf Abseits entschieden) erhöht und die der „Non-Flag-Errors“ (Abseits nicht er-kannt) senkt. Experiment 2 wird zeigen, welche Rolle hierbei periphere visuelle Informa-tionen spielen. Diskussion Die vermutete Rückführung von fehlerhaften Abseitsentscheidungen auf periphere (vi-suelle) Wahrnehmungsaspekte konnte bestätigt werden. Der relative Einfluss auditiver und visueller Informationen auf die Fehlerquote gilt es weiter zu untersuchen. Literatur Catteeuw, P., Helsen, W., Gilis, B., Van Roie, E., & Wagemans, J. (2009). Visual scan patterns and decision-making skills of expert assistant referees in offside situations. Journal of Sport & Exercise Psychol-ogy, 31, 786-797. Helsen, W., Gilis, B., & Weston, M. (2006). Errors in judging “offside” in association football: Test of the optical error versus the perceptual flash-lag hypothesis. Journal of Sports Sciences, 24, 521–528.

Hidrodinamica de planeadores submarinos y su impacto en la funcionalidad de sensores CTD

Los recientes desarrollos tecnológicos permiten la transición de la oceanografía observacional desde un concepto basado en buques a uno basado en sistemas autónomos en red. Este último, propone que la forma más eficiente y efectiva de observar el océano es con una red de plataformas autónomas distribuidas espacialmente y complementadas con sistemas de medición remota. Debido a su maniobrabilidad y autonomía, los planeadores submarinos están jugando un papel relevante en este concepto de observaciones en red. Los planeadores submarinos fueron específicamente diseñados para muestrear vastas zonas del océano. Estos son robots con forma de torpedo que hacen uso de su forma hidrodinámica, alas y cambios de flotabilidad para generar movimientos horizontales y verticales en la columna de agua. Un sensor que mide conductividad, temperatura y profundidad (CTD) constituye un equipamiento estándar en la plataforma. Esto se debe a que ciertas variables dinámicas del Océano se pueden derivar de la temperatura, profundidad y salinidad. Esta última se puede estimar a partir de las medidas de temperatura y conductividad. La integración de sensores CTD en planeadores submarinos no esta exenta de desafíos. Uno de ellos está relacionado con la precisión de los valores de salinidad derivados de las muestras de temperatura y conductividad. Específicamente, las estimaciones de salinidad están significativamente degradadas por el retardo térmico existente, entre la temperatura medida y la temperatura real dentro de la celda de conductividad del sensor. Esta deficiencia depende de las particularidades del flujo de entrada al sensor, su geometría y, también se ha postulado, del calor acumulado en las capas de aislamiento externo del sensor. Los efectos del retardo térmico se suelen mitigar mediante el control del flujo de entrada al sensor. Esto se obtiene generalmente mediante el bombeo de agua a través del sensor o manteniendo constante y conocida su velocidad. Aunque recientemente se han incorporado sistemas de bombeo en los CTDs a bordo de los planeadores submarinos, todavía existen plataformas equipadas con CTDs sin dichos sistemas. En estos casos, la estimación de la salinidad supone condiciones de flujo de entrada al sensor, razonablemente controladas e imperturbadas. Esta Tesis investiga el impacto, si existe, que la hidrodinámica de los planeadores submarinos pudiera tener en la eficiencia de los sensores CTD. Específicamente, se investiga primero la localización del sensor CTD (externo al fuselaje) relativa a la capa límite desarrollada a lo largo del cuerpo del planeador. Esto se lleva a cabo mediante la utilización de un modelo acoplado de fluido no viscoso con un modelo de capa límite implementado por el autor, así como mediante un programa comercial de dinámica de fluidos computacional (CFD). Los resultados indican, en ambos casos, que el sensor CTD se encuentra fuera de la capa límite, siendo las condiciones del flujo de entrada las mismas que las del flujo sin perturbar. Todavía, la velocidad del flujo de entrada al sensor CTD es la velocidad de la plataforma, la cual depende de su hidrodinámica. Por tal motivo, la investigación se ha extendido para averiguar el efecto que la velocidad de la plataforma tiene en la eficiencia del sensor CTD. Con este propósito, se ha desarrollado un modelo en elementos finitos del comportamiento hidrodinámico y térmico del flujo dentro del CTD. Los resultados numéricos indican que el retardo térmico, atribuidos originalmente a la acumulación de calor en la estructura del sensor, se debe fundamentalmente a la interacción del flujo que atraviesa la celda de conductividad con la geometría interna de la misma. Esta interacción es distinta a distintas velocidades del planeador submarino. Específicamente, a velocidades bajas del planeador (0.2 m/s), la mezcla del flujo entrante con las masas de agua remanentes en el interior de la celda, se ralentiza debido a la generación de remolinos. Se obtienen entonces desviaciones significantes entre la salinidad real y aquella estimada. En cambio, a velocidades más altas del planeador (0.4 m/s) los procesos de mezcla se incrementan debido a la turbulencia e inestabilidades. En consecuencia, la respuesta del sensor CTD es mas rápida y las estimaciones de la salinidad mas precisas que en el caso anterior. Para completar el trabajo, los resultados numéricos se han validado con pruebas experimentales. Específicamente, se ha construido un modelo a escala del sensor CTD para obtener la confirmación experimental de los modelos numéricos. Haciendo uso del principio de similaridad de la dinámica que gobierna los fluidos incompresibles, los experimentos se han realizado con flujos de aire. Esto simplifica significativamente la puesta experimental y facilita su realización en condiciones con medios limitados. Las pruebas experimentales han confirmado cualitativamente los resultados numéricos. Más aun, se sugiere en esta Tesis que la respuesta del sensor CTD mejoraría significativamente añadiendo un generador de turbulencia en localizaciones adecuadas al interno de la celda de conductividad. ABSTRACT Recent technological developments allow the transition of observational oceanography from a ship-based to a networking concept. The latter suggests that the most efficient and effective way to observe the Ocean is through a fleet of spatially distributed autonomous platforms complemented by remote sensing. Due to their maneuverability, autonomy and endurance at sea, underwater gliders are already playing a significant role in this networking observational approach. Underwater gliders were specifically designed to sample vast areas of the Ocean. These are robots with a torpedo shape that make use of their hydrodynamic shape, wings and buoyancy changes to induce horizontal and vertical motions through the water column. A sensor to measure the conductivity, temperature and depth (CTD) is a standard payload of this platform. This is because certain ocean dynamic variables can be derived from temperature, depth and salinity. The latter can be inferred from measurements of temperature and conductivity. Integrating CTD sensors in glider platforms is not exempted of challenges. One of them, concerns to the accuracy of the salinity values derived from the sampled conductivity and temperature. Specifically, salinity estimates are significantly degraded by the thermal lag response existing between the measured temperature and the real temperature inside the conductivity cell of the sensor. This deficiency depends on the particularities of the inflow to the sensor, its geometry and, it has also been hypothesized, on the heat accumulated by the sensor coating layers. The effects of thermal lag are usually mitigated by controlling the inflow conditions through the sensor. Controlling inflow conditions is usually achieved by pumping the water through the sensor or by keeping constant and known its diving speed. Although pumping systems have been recently implemented in CTD sensors on board gliders, there are still platforms with unpumped CTDs. In the latter case, salinity estimates rely on assuming reasonable controlled and unperturbed flow conditions at the CTD sensor. This Thesis investigates the impact, if any, that glider hydrodynamics may have on the performance of onboard CTDs. Specifically, the location of the CTD sensor (external to the hull) relative to the boundary layer developed along the glider fuselage, is first investigated. This is done, initially, by applying a coupled inviscid-boundary layer model developed by the author, and later by using a commercial software for computational fluid dynamics (CFD). Results indicate, in both cases, that the CTD sensor is out of the boundary layer, being its inflow conditions those of the free stream. Still, the inflow speed to the CTD sensor is the speed of the platform, which largely depends on its hydrodynamic setup. For this reason, the research has been further extended to investigate the effect of the platform speed on the performance of the CTD sensor. A finite element model of the hydrodynamic and thermal behavior of the flow inside the CTD sensor, is developed for this purpose. Numerical results suggest that the thermal lag effect is mostly due to the interaction of the flow through the conductivity cell and its geometry. This interaction is different at different speeds of the glider. Specifically, at low glider speeds (0.2 m/s), the mixing of recent and old waters inside the conductivity cell is slowed down by the generation of coherent eddy structures. Significant departures between real and estimated values of the salinity are found. Instead, mixing is enhanced by turbulence and instabilities for high glider speeds (0.4 m/s). As a result, the thermal response of the CTD sensor is faster and the salinity estimates more accurate than for the low speed case. For completeness, numerical results have been validated against model tests. Specifically, a scaled model of the CTD sensor was built to obtain experimental confirmation of the numerical results. Making use of the similarity principle of the dynamics governing incompressible fluids, experiments are carried out with air flows. This significantly simplifies the experimental setup and facilitates its realization in a limited resource condition. Model tests qualitatively confirm the numerical findings. Moreover, it is suggested in this Thesis that the response of the CTD sensor would be significantly improved by adding small turbulators at adequate locations inside the conductivity cell.

Flash floods and their effects on the development in El-Qaá plain area in South Sinai, Egypt

The arid regions are dominated to a much larger degree than humid regions by major catastrophic events. Although most of Egypt lies within the great hot desert belt; it experiences especially in the north some torrential rainfall, which causes flash floods all over Sinai Peninsula. Flash floods in hot deserts are characterized by high velocity and low duration with a sharp discharge peak. Large sediment loads may be carried by floods threatening fields and settlements in the wadis and even people who are living there. The extreme spottiness of rare heavy rainfall, well known to desert people everywhere, precludes any efficient forecasting. Thus, although the limitation of data still reflects pre-satellite methods, chances of developing a warning system for floods in the desert seem remote. The relatively short flood-to-peak interval, a characteristic of desert floods, presents an additional impediment to the efficient use of warning systems. The present thesis contains introduction and five chapters, chapter one points out the physical settings of the study area. There are the geological settings such as outcrop lithology of the study area and the deposits. The alluvial deposits of Wadi Moreikh had been analyzed using OSL dating to know deposits and palaeoclimatic conditions. The chapter points out as well the stratigraphy and the structure geology containing main faults and folds. In addition, it manifests the pesent climate conditions such as temperature, humidity, wind and evaporation. Besides, it presents type of soils and natural vegetation cover of the study area using unsupervised classification for ETM+ images. Chapter two points out the morphometric analysis of the main basins and their drainage network in the study area. It is divided into three parts: The first part manifests the morphometric analysis of the drainage networks which had been extracted from two main sources, topographic maps and DEM images. Basins and drainage networks are considered as major influencing factors on the flash floods; Most of elements were studied which affect the network such as stream order, bifurcation ratio, stream lengths, stream frequency, drainage density, and drainage patterns. The second part of this chapter shows the morphometric analysis of basins such as area, dimensions, shape and surface. Whereas, the third part points the morphometric analysis of alluvial fans which form most of El-Qaá plain. Chapter three manifests the surface runoff through rainfall and losses analysis. The main subject in this chapter is rainfall which has been studied in detail; it is the main reason for runoff. Therefore, all rainfall characteristics are regarded here such as rainfall types, distribution, rainfall intensity, duration, frequency, and the relationship between rainfall and runoff. While the second part of this chapter concerns with water losses estimation by evaporation and infiltration which are together the main losses with direct effect on the high of runoff. Finally, chapter three points out the factors influencing desert runoff and runoff generation mechanism. Chapter four is concerned with assessment of flood hazard, it is important to estimate runoff and tocreate a map of affected areas. Therefore, the chapter consists of four main parts; first part manifests the runoff estimation, the different methods to estimate runoff and its variables such as runoff coefficient lag time, time of concentration, runoff volume, and frequency analysis of flash flood. While the second part points out the extreme event analysis. The third part shows the map of affected areas for every basin and the flash floods degrees. In this point, it has been depending on the DEM to extract the drainage networks and to determine the main streams which are normally more dangerous than others. Finally, part four presets the risk zone map of total study area which is of high inerest for planning activities. Chapter five as the last chapter concerns with flash flood Hazard mitigation. It consists of three main parts. First flood prediction and the method which can be used to predict and forecast the flood. The second part aims to determine the best methods which can be helpful to mitigate flood hazard in the arid zone and especially the study area. Whereas, the third part points out the development perspective for the study area indicating the suitable places in El-Qaá plain for using in economic activities.

The effect of recombinant recoverin on the photoresponse of truncated rod photoreceptors

Recoverin is a heterogeneously acylated calcium-binding protein thought to regulate visual transduction. Its effect on the photoresponse was investigated by dialyzing the recombinant protein into truncated salamander rod outer segments. At high Ca2+ (Ca), myristoylated recoverin (Ca-recoverin) prolonged the recovery phase of the bright flash response but had less effect on the dim flash response. The prolongation of recovery had an apparent Kd for Ca of 13 μM and a Hill coefficient of 2. The prolongation was shown to be mediated by inhibition of rhodopsin deactivation. After a sudden imposed drop in Ca concentration, the effect of recoverin switched off with little lag. The myristoyl (C14:0) modification of recoverin increased its activity 12-fold, and the C12:0 or C14:2 acyl group gave similar effects. These experiments support the notion that recoverin mediates Ca-dependent inhibition of rhodopsin phosphorylation and thereby controls light-triggered phosphodiesterase activity, particularly at high light levels.

Multiple effect flash (MEF) evaporator,

Mode of access: Internet.

Effect of terbium(III) on the binding of aromatic guests with sodium taurocholate aggregates

The effect of binding Tb(3+) to sodium taurocholate aggregates containing polyaromatic hydrocarbon guests was examined using pyrene and 1-ethylnaphthalene as guests that bind to the primary aggregate, and 1-naphthyl-1-ethanol as a secondary aggregate guest. Time-resolved fluorescence quenching studies were used to study the binding site properties, while laser flash photolysis quenching studies provided information on the dynamics of the guest-aggregate system. Both the primary and secondary aggregate binding sites became more compact in the presence of bound Tb(3+), while only the primary aggregate became more accessible to anionic molecules. The binding dynamics for the guest-primary aggregate system became faster when Tb(3+) was bound to the aggregate. In contrast, for the guest-secondary aggregate the presence of Tb(3+) resulted in a small decrease in the dissociation rate constant. The influence of bound Tb(3+) on the primary and secondary bile salt aggregates is significantly different, which affects how these aggregates can be used as supramolecular host systems to modify guest reactivity.