Length-frequency estimation for yellowfin tuna (Thunnus albacares) caught by commercial fishing gear in the Eastern Pacific Ocean

ENGLISH: Methods of collecting samples for the purpose of estimating the numbers and weights of fish caught, by length interval, are described. Several models for two-stage sampling are described, and the equations for the estimators and their variances are given. The results from a brief simulation study are used to show the differences between estimates made with the different models. Estimators for the average weights of fish in the catch and their variances are also described. These average weights are used to provide improved estimates of the total annual catches of yellowfin taken from the eastern Pacific Ocean, east of 150°W, between 1955 and 1990. SPANISH: Se describen los métodos de recoger de muestreo para estimar el número o peso de peces capturados, por intervalo de talla. Se describen varios modelos para el muestreo de dos etapas, y se presentan las ecuaciones para los estimadores y sus varianzas. Se usan los resultados de un breve estudio de simulación para indicar las diferencias entre estimaciones realizadas con los distintosmodelos. También se describe un estimador para el peso promedio de peces en la captura y su varianza. Se usan estos estimadores para calcular estimaciones mejoradas de las capturas anuales totales de aleta amarilla tomadas del Océano Pacífico oriental, al este de 150°W, entre 1955 y 1990. (PDF contains 41 pages.)

Fishing gear survey of Lake Alau

This report briefly documents the fishing gear commonly used by local fishers in Lake Alau (Nigeria). Five types of gears are described: gill-net, cast net, Gura trap, longlines, and Clap net

An overview of the Clupeid fishing gear of Kainji Lake

Fishing gears and methods that target the Clupeids are atalla lift net, light attraction, midwater trawl and dala (Clupeid beach seine).Dala fisheries have been the most lucrative fishing gear on Clupeids within the recent past. However, it has been declared as 100% illegal gear having a mesh size of 0.1 mm, because it catches indiscriminately undersized (juveniles/larvae) commercial fish. The ban on the gear was therefore mounted through promulgation and implementation of special fisheries laws for Kainji Lake (Nigeria). Although, the use of Dala fishing gear and method has decreased due to this management approach, its use is currently increased again. It is therefore suggested that the ban on the use of Dala may not be the answer to indiscriminate fisheries, but modification of the gear and methods for harvesting Clupeids should be the main objective

The use and economic benefits of fibres from sisal hemp (Agave sisalana) leaves as supporting ropes for fishing gear

Sisal hemp (Agave sisalana) leaves were harvested and processed using the beating and decomposition methods. The fibres obtained were washed, dried and finally spurned in to cordage of about 4mm diameter 39 pieces of ropes, each measuring 2 meters were altogether spurned. 30 pieces of these ropes were immersed in water for a period of 24 weeks, 6 were placed in a shaded and airily place and 3 were used for the head and footling of gillnet, sinker line of cast net and the main line of long line. Every other week, the ropes in water and air were tested for its breaking strength using an improved 50kg spring balance. At the end of the experiment, it was found the immersed ropes maintained a tensile strength of over 50kg/F for the first 18 weeks, thereafter; there was a gradual weekly reduction in the strength until the 23rd week when the tensile strength was less than 1kg/F. The cost benefit analysis showed that about 5,3146 tons processed fibers could be obtained fro 1ha. capable of being spenced in to 528300m of 4mm diameter cordage. This paper finally recommended the growth of sisal hemp plants by fisher folks so that there will be constant stock for intermittent harvesting for rope spurning

Fishing gear survey of Kainji Lake, northern Nigeria, 1996

A survey was carried out in September 1996 alongside the annual frame survey of Kainji Lake, Nigeria. As in the previous surveys, there were 6 main fishing gear types in use on the lake, which included gill nets, drift nets, beach seines, cast nets, longlines (baited and foul hooking) acid fishing traps. A total of 813 canoes were sampled. The canoe lengths were similar to the previous gear surveys. Altogether 466 gill nets were measured. They had an average length of 149 m, and were mostly bottom set. Of the gill nets measured 68% had a mesh size below 3 inches the minimum mesh size allowable according to the Niger and Kebbi State Fisheries Edict, 1996. Of concern was the large increase in the number of 1 inch meshed nets recorded on the lake. Drift nets had a mean length of 74 m. A total of 88% of all drift nets measured had a mesh size below 2.5 inches, the minimum mesh size stipulated in the State Edict. A total number of 102 beach seines were sampled with a mean length of 110 m, the mesh size in use on the lake remained as 0.1 inches under the Edict beach seines are banned from fishing in Kainji Lake. The decline in the lengths of the beach seines (and therefore catch rates) recorded since l995 was encouraging in the light of the destructive nature of these nets. A total of 30 cast nets were sampled, they had a mean diameter of 9.8 and a mean mesh size of 1.9 inches. All the nets had a hanging ratio of 0.5. Of the cast nets measured 40% had a mesh size below the minimum size of 2 inches recommended by the State Fisheries Edicts. Of concern was the continued rise in the number of gill nets with mesh sizes less than 2 inches. There were 2 types of longlines in operation on the lake. The baited and the foul hooking longlines. They were mostly bottom set and the hook size nos. 12-14 (Kirby sea hook) were predominant. Two types of fishing traps were identified, one was covered with a mesh of thin cane, one with netting material. The fishing traps had a mean height of 0.8 m and a mean width at the vase of 0.53 m. The mean mesh size used was 0.86 inches. Citharinus was reported as the most targeted of all fish species on the lake. Synodontis membranaceous was also targeted by most gears especially the smaller meshed nets. Labeo and Tilapia were low on the list of targeted species but their incidence remains high in the catches. (PDF contains 27 pages)

Marketing of fishing gear materials and fishing gear making in parts of Kainji Lake basin

The importance of fishing gear in fishing cannot be over-emphasized; as without it fish cannot be obtained. The method used to catch fish affects the condition in which the product is landed. This means that a bad-catching method would produced bad fish to the consumer. To achieve the goal of self-sufficiency in fish production in Nigeria, there is need to address the lingering problems of fishing gear and craft technology, especially in terms of availability of materials and their cost. The sale and making of fishing gear materials are two areas of fisheries, which are yet to be exploited by the general public as forms of businesses for livelihood. The study is conducted in villages around the lower part of Kainji Lake, towards the dam, including New Bussa. It reveals that only the fishermen themselves are involved in making their own fishing gears while those involved in the selling of fishing gear materials like the sheet netting, ropes, twines, floats, sinkers etc are business men and women who may not have any experience of fishing. Also considered in the study is the art of making fishing crafts like the canoe and gourd. Very few entrepreneurs are involved and they are so skilled that each is specialized in the making of only one kind of craft or gear

Fishing gear experiments in Finland

A comparison of some different European methods of estimating the numbers of fish in a lake using different fishing gear is described. The different gears used were 1. surface trawl used by night 2. bottom trawl used by day 3. trammel nets, set in the evening and lifted in the morning 4. surface seine net used by night 5. bottom seine net used by day 6. Fyke nets, emptied each morning and evening 7. gill nets, set in the evening and lifted in the morning. The most variable catches were from those gears used by day on the bottom and the least variable were those used by night at the surface. The work continued by examining the use of acoustic systems for pelagic fish stock assessment. This gear gave reasonable population estimates for pelagic fish 10m and more below the surface. The advantage of the accoustic method is that it is quick and requires little labour. Its disadvantage is that it is not possible to identify the species and so it must be supplemented by another, conventional method.

Interactions between marine mammals and pelagic longline fishing gear in the U.S. Atlantic Ocean between 1992 and 2004

The U.S. East Coast pelagic longline fishery has a history of interactions with marine mammals, where animals are hooked and entangled in longline gear. Pilot whales (Globicephala spp.) and Risso’s dolphin (Grampus griseus) are the primary species that interact with longline gear. Logistic regression was used to assess the environmental and gear characteristics that influence interaction rates. Pilot whale inter-actions were correlated with warm water temperatures, proximity to the shelf break, mainline lengths greater than 20 nautical miles, and damage to swordfish catch. Similarly, Risso’s dolphin interactions were correlated with geographic location, proximity the shelf break, the length of the mainline, and bait type. The incidental bycatch of marine mammals is likely associated with depredation of the commercial catch and is increased by the overlap between marine mammal and target species habitats. Altering gear characteristics and fishery practices may mitigate incidental bycatch and reduce economic losses due to depredation.

Diversity of selective and non-selective fishing gear and their impact on inland fisheries in Bangladesh

The paper describes the wide range of traditional fishing gear used by subsistence and professional fishers in the inland waters in Bangladesh as well as their impact on the fisheries and the environment. The negative impacts indicate the need for regulation of specific types of fishing gear at particular times of the year. An awareness/training program should be extended to the fishermen to create awareness of the long-term effects of their fishing practices and to impart knowledge of fishing laws.

Who's working on fishing gear design and construction for small-scale fisheries?

The findings are presented of a search conducted on traditional fishing gear design and construction using the ASFA database (1971-90) and the ICLARM Library and professional staff collections.

A study of the crab pot as a fishing gear

The crab pot as a fishing gear was introduced in Maryland waters, following some years of greatly expanded use in Virginia, during the 1939 season, and was widely used during 1940. The 1941 session of the Maryland Legislature, however, illegalized the crab pot. Since that time the device has been given up almost entirely by Maryland fishermen, its attempted use in a commercial way having persisted in diminishing numbers in only one region of the state.

Technical terms in fishing gear materials and gear fabrication

Papers dealing with technical terms in fisheries science are few. This paper however, covers only one or two aspects of the subject, namely fishing gear materials and fishing gear fabrication. Similar papers on other aspects are also planned. Short explanations or descriptions are also given wherever considered necessary.