Exporting to Eastern Europe : principles and practice, including a case study of the market for fire fighting equipment

East-West trade has grown rapidly since the sixties, stimulating a parallel expansion in the literature on the subject. An extensive review of this literature shows how: (i) most of the issues involved have at their source the distinctions between East and West in political ideology and/or economic management, and (ii) there has been a tendency to keep theoretical and practical perspectives on the subject too separate. This thesis demonstrates the importance of understanding the fundamental principles implied in the first point, and represents an attempt to bridge the gap identified in the second. A detailed study of the market for fire fighting equipment in Eastern Europe is undertaken in collaboration with a medium-sized company, Angus Fire Armour Limited. Desk research methods are combined with visits to the market to assess the potential for the company's products, and recommendations for future strategy are made. The case demonstrates the scope and limitations of various research methods for the East European market, and a model for market research relevant to all companies is developed. Tne case study highlights three areas largely neglected in the literature: (i) the problems of internal company adaptation to East European conditions; (ii) the division of responsibility between foreign trade organisations; and (iii) bribery and corruption in East-West trade. Further research into the second topic - through a survey of 36 UK exporters - and the third - through analysis of publicised corruption cases - confirms the representativeness of the Angus experience, and reflects on the complexity of the Bast European import process, which does not always function as is commonly supposed. The very complexity of the problems confronting companies reaffirms the need to appreciate the principles underlying the subject, while the detailed analysis into questions of, originally, a marketing nature, reveals wider implications for East-West trade and East-West relations.

Escape worthiness of vehicles for occupancy survivals and crashes. Second part: appendices. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Sistemas de automação e manutenção de edifícios: concepção dos sistemas de detecção e protecção contra incêndios de uma unidade industrial

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Haven Hall -- Fire June 1950.

Jordan & Anderson, architect (1863); Spier & Rohns (1898). The old Law Building was renamed Haven Hall in 1933. It becomes one of the main buildings for LS&A used by Departments of History, Sociology and Journalism. The old Law Library became a study hall and Bureau of Government Library. Extension Division also had offices in Haven Hall.

H-house

The author's approach to the problems associated with building in bushfire prone landscapes comes from 12 years of study of the biophysical and cultural landscapes in the Great Southern Region of Western Australia - research which resulted in the design and construction of the H-house at Bremer Bay. The house was developed using a 'ground up' approach whereby Dr Weir conducted topographical surveys and worked with a local botanist and a bushfire risk consultant to ascertain the level of threat that fire presented to this particular site. The intention from the outset however, was not to design a bushfire resistant house per se, but to develop a design which would place the owners in close proximity to the highly biodiverse heath vegetation of their site. The research aim was to find ways - through architectural design-to link the patterns of usage of the house with other site specific conditions related to the prevailing winds, solar orientation and seasonal change. The H-house has a number of features which increase the level of bushfire safety. These include: Fire rated roller shutters (tested by the CSIRO for ember attack and radiant heat), Fire resistant double glazing (on windows not protected by the shutters), Fibre-cement sheet cladding of the underside of the elevated timber floor structure, Manually operated high pressure sprinkler system on exposed timber decks, A fire refuge (an enlarged laundry, shower area) within the house with a dedicated cabinet for fire fighting equipment) and A low pressure solar powered domestic water supply system.

Projecte d’instal∙lacions d’un edifici mixte d’habitatges, local industrial i aparcament

Aquest projecte tracta d’un estudi tècnic, disseny i càlcul de les instal∙lacions d’un edifici mixte d’habitatges, local comercial i zona d’aparcament, complint la normativa que li pertoca segons l’ús a que es destina l’espai. L’edifici objecte d’aquest projecte es troba situat a la cruïlla Platja d’Aro s/n de la localitat de Santa Cristina d’Aro, i es tracta com un edifici de nova construcció. L’abast del projecte contempla les instal∙lacions elèctriques, tèrmiques, contra incendis, sanejament i de salubritat, per tal d’assolir les fases executives del projecte, així com les legalitzacions de les diferents activitats que es desenvolupen a l’edifici (aparcament de vehicles, comercial, taller de reparació de vehicles a motor i d’ús administratiu). Es pretén fer un estudi integral de les instal∙lacions i mesures correctores que es poden realitzar en un edifici amb les característiques esmentades

Amostragem da emissão de material particulado em ambientes externos

The concern of the society with regard to the pollution if becomes each bigger and necessary time. This pollution generates damage for who is in contact, as much in economic terms how much in quality of life. The particulate matter is one of the main polluting the air, being the most harmful to human health, fine particles and ultra fine (below 2.5 μm in diameter). With this, this work had as objective to mensurar the pollution of air for material particulado through samplings in an urban center, in a siderurgical industry, a conventional coal bunker and a forest fire. The equipment used for the sampling of particles had been the DataRam4 (model DR 4000) and the Impactador de Andersen, both developed by company THERMO SCIENTIFIC. The first equipment uses a system of nefelometry and the second uses a gravimetrical system of sampling. During the carried through samplings, it can be observed in some cases the difficulty in the breath, badly be and low visibility that this type of pollutant can cause. In most cases the results were disturbing. In industry, conventional coal bunker and in the forest were measured values high concentration for particles smaller diameters. Peak concentrations issued were: 40,000 μg/m³, 182,000 μg/m³ and 400,000 μg/m³ for the industry, conventional coal bunker and forest, respectively. Already in the urban centre were satisfactory results, always staying within the limit allowed by the rules in force so far in the country

Incêndios de petróleo e pretoquímicos: biorremediação de áreas afetadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análisis y reducción del riesgo de explosión por incendio en los almacenes de pirotecnia

Un incendio en el interior de un almacén de pirotecnia puede provocar la iniciación más o menos simultánea de los artículos existentes en su interior, con su consecuente onda de choque potenciada por la presión de los propios gases generados en su interior. La finalidad de esta tesis doctoral consiste en analizar los fenómenos que se desarrollan como consecuencia de un incendio interior en los almacenes de pirotecnia y establecer posibles medidas eficaces de prevención y protección con objeto de reducir el riesgo de explosión.. Inicialmente se llevó a cabo un análisis del riesgo de explosión, evaluando las consecuencias en caso de producirse un fuego interior. Los resultados fueron catastróficos. Finalmente, y con objeto de minimizar la posibilidad de producirse un incendio en el interior de un almacén, se evaluaron diferentes sistemas de detección y extinción automática de incendios para almacenes pirotécnicos, realizándose pruebas a escala real. En particular, la presente tesis consta de los siguientes trabajos: 1) Evaluación de la sobrepresión generada por la explosión de artificios pirotécnicos en el interior de almacenes, mediante pruebas de explosión de artículos pirotécnicos, con el fin de evaluar las posibles consecuencias en caso de materializarse una explosión, y disponer de información que permita conocer el grado de resistencia de las estructuras de los almacenes, así como el diseño adecuado de las mismas para soportar los efectos de tales explosiones. 2) Evaluación del efecto de un incendio en el interior de un almacén de pirotecnia mediante pruebas a escala real, con el fin de evaluar la posibilidad de la iniciación simultánea de los artículos pirotécnicos almacenados en su interior, y su consecuente explosión, así como las consecuencias en caso de materializarse la explosión. 3) Análisis de sistemas de detección y extinción automática de incendios para almacenes de pirotecnia, mediante la realización de pruebas a escala real para verificar la eficiencia y eficacia de tales sistemas y agentes para sofocar un incendio pirotécnico de forma tal que se evite la posible explosión asociada. 4) Evaluación de nuevos agentes extintores utilizados en los sistemas de extinción automática de incendios, que actualmente se están utilizando en el sector pirotécnico nacional, mediante la realización de pruebas a escala real. Los resultados obtenidos han permitido al Ministerio de Industria, Energía y Turismo actualizar la reglamentación vigente aplicable (Instrucción Técnica Complementaria número 17 del Reglamento de artículos pirotécnicos y cartuchería, aprobado por el Real Decreto 563/2010, de 7 de mayo). ABSTRACT A fire inside a pyrotechnics magazine can cause the more or less simultaneous initiation of the stored articles, with the wave of shock that is produced promoted by the pressure of the gases generated in its interior. The purpose of this PhD thesis is to analyze the phenomena that develop as a result of a fire inside the pyrotechnics stores and establish possible effective prevention and protection measures to reduce the risk of explosionAn analysis of the risk of explosion and fire consequences in a pyrotechnic magazine, testing to real scale, was initially carried out. The results were catastrophic. Finally, and in order to minimize the possibility of a fire inside a pyrotechnic magazine, different systems of detection and automatic extinction of fires in pyrotechnic magazines were evaluated, testing to real scale. Particularly, this thesis has the following parts: 1) Evaluation of the pressure generated by the pyrotechnic explosion in a magazine, with explosión tests of pyrotechnic articles, in order to evaluate the possible consequences in case of materialize an explosion, and provide information to know the resistance grade of the magazine structures, as well as the right design of those to withstand the effects of such explosions. 2) Evaluation of the effect of a fire inside a pyrotechnic magazine by full-scale tests, in order to evaluate the possibility of simultaneous initiation of the pyrotechnic articles stored inside, and the resulting explosion, as well as the consequences in case of materialize an explosion. 3) Analysis and evaluation of detection and automatic fire extinguishing in pyrotechnic magazines, by full-scale tests in order to verify the efficiency and effectiveness of such systems and agents to quell a pyrotechnic fire and avoid the posible mass explosion. 4) Evaluation of new extinguishing agent used in automatic fire extinguishers, which are currently being used in the national fireworks industry, by full-scale tests. The results obtained have allowed the Ministry of Industry, Energy and Tourism, update the current regulation (Complementary Technical Instruction 17 of the Regulation of Pyrotecnic Articles and Ammunition, approved by the Royal Decree 563/2010, of May 7).

-1871- Alpena, Mich.

Shows aftermath of large fire

The morning after the night before: campfires revisited

Even eight hours after a campfire has been extinguished with sand, it retains sufficient heat to cause a full-thickness burn with contact of one second. Because extinguishing with sand disguises the danger, this is a particular hazard for children. The only safe way to extinguish a campfire is with water.

Aplicação de Ligas com Memória de Forma como Dispositivos de Segurança

As ligas com memória de forma Ni-Ti apresentam diversas características bastante úteis, das quais podemos realçar a sua elevada resistência à corrosão, às vibrações e geração de forças superiores quando comparadas com outros atuadores. Estas ligas apresentam diversas áreas de aplicabilidade em diferentes aéreas de pesquisa, como a metalomecânica, a robótica, aplicações espaciais, sendo mais relevante para este trabalho a sua aplicação em mecanismos de segurança para portas e acessos. Com este trabalho, pretendemos contribuir para uma forma eficaz de combate e contenção de incêndios em navios, através da apresentação de um mecanismo que vai permitir o corte de ventilação e isolamento no local do incêndio, permitindo criar uma fronteira de fumos que levará ao combate do incêndio por asfixia. O trabalho descreve um mecanismo idealizado com a utilização de ligas com memória de forma, que vai proceder à libertação de um flap, para isolamento da ventilação, na presença de temperatura proveniente do incêndio. Descreve também ensaios termomecânicos realizados, para determinação das características das molas e seu comportamento em determinadas situações chave. Para isto, irão ser utilizadas duas molas com diferentes gamas de temperatura, com o intuito de demonstrar a eficácia na utilização de diversos atuadores de ligas com memória de forma. Todos os testes foram feitos na presença de gamas de temperatura que se assemelham aos valores de atuação dos sistemas automáticos de extinção por água, pelo que os resultados obtidos, ilustram a verdadeira eficácia e utilidade do mecanismo, em casos reais.