Research in mechanical farm equipment /

Cover title.

In the matter of International Harvester Company, East Moline Works, and United Farm Equipment and Metal Workers of America, Local 104 (CIO) : proceeding of arbitration, allowance rule grievances.

Mode of access: Internet.

The Tractor field book, with power farm equipment specifications.

Title varies slightly.

How to repair and build farm equipment with arc welding.

Mode of access: Internet.

Farm practices : plowing, harrowing, planting, cultivating.

Mode of access: Internet.

Permanent farm construction; a manual on farm concrete.

Mode of access: Internet.

Hardware building materials, farm and garden curriculum guide /

Developed under contractual agreements RD3-A9-240 and R-33-X-0442-240 between the Illinois State Board of Education, Dept. of Adult, Vocational and Technical Education, Research and Development Section and the Dept. of Vocational Education Studies, Southern Illinois University, Carbondale.

The distribution and spread of citrus canker in Emerald, Australia

Citrus canker is a disease of citrus and closely related species, caused by the bacterium Xanthomonas citri subsp. citri. This disease, previously exotic to Australia, was detected on a single farm [infested premise-1, (IP1). IP is the terminology used in official biosecurity protocols to describe a locality at which an exotic plant pest has been confirmed or is presumed to exist. IP are numbered sequentially as they are detected] in Emerald, Queensland in July 2004. During the following 10 months the disease was subsequently detected on two other farms (IP2 and IP3) within the same area and studies indicated the disease first occurred on IP1 and spread to IP2 and IP3. The oldest, naturally infected plant tissue observed on any of these farms indicated the disease was present on IP1 for several months before detection and established on IP2 and IP3 during the second quarter (i.e. autumn) 2004. Transect studies on some IP1 blocks showed disease incidences ranged between 52 and 100% (trees infected). This contrasted to very low disease incidence, less than 4% of trees within a block, on IP2 and IP3. The mechanisms proposed for disease spread within blocks include weather-assisted dispersal of the bacterium (e.g. wind-driven rain) and movement of contaminated farm equipment, in particular by pivot irrigator towers via mechanical damage in combination with abundant water. Spread between blocks on IP2 was attributed to movement of contaminated farm equipment and/or people. Epidemiology results suggest: (i) successive surveillance rounds increase the likelihood of disease detection; (ii) surveillance sensitivity is affected by tree size; and (iii) individual destruction zones (for the purpose of eradication) could be determined using disease incidence and severity data rather than a predefined set area.

The distribution and spread of citrus canker in Emerald, Australia

Citrus canker is a disease of citrus and closely related species, caused by the bacterium Xanthomonas citri subsp. citri. This disease, previously exotic to Australia, was detected on a single farm [infested premise-1, (IP1). IP is the terminology used in official biosecurity protocols to describe a locality at which an exotic plant pest has been confirmed or is presumed to exist. IP are numbered sequentially as they are detected] in Emerald, Queensland in July 2004. During the following 10 months the disease was subsequently detected on two other farms (IP2 and IP3) within the same area and studies indicated the disease first occurred on IP1 and spread to IP2 and IP3. The oldest, naturally infected plant tissue observed on any of these farms indicated the disease was present on IP1 for several months before detection and established on IP2 and IP3 during the second quarter (i.e. autumn) 2004. Transect studies on some IP1 blocks showed disease incidences ranged between 52 and 100% (trees infected). This contrasted to very low disease incidence, less than 4% of trees within a block, on IP2 and IP3. The mechanisms proposed for disease spread within blocks include weather-assisted dispersal of the bacterium (e.g. wind-driven rain) and movement of contaminated farm equipment, in particular by pivot irrigator towers via mechanical damage in combination with abundant water. Spread between blocks on IP2 was attributed to movement of contaminated farm equipment and/or people. Epidemiology results suggest: (i) successive surveillance rounds increase the likelihood of disease detection; (ii) surveillance sensitivity is affected by tree size; and (iii) individual destruction zones (for the purpose of eradication) could be determined using disease incidence and severity data rather than a predefined set area.

The Nebraska Agricultural Outlook for 1938

Each year the federal government gathers data relating to agriculture through the various departments of the United States Department of Agriculture. These data are classified and analyzed by the Bureau of Agricultural Economics at Washington and all information which may be helpful to farmers is published. For several years it has been the policy of the Department of Rural Economics and the Agricultural Extension Service of the College of Agriculture, Lincoln, to select from the federal information facts which may be especially helpful to Nebraska farmers. These facts and other economic conditions in Nebraska are published this year as the Agricultural Outlook for Nebraska, 1938. The Outlook should be helpful in the marketing of the crops and livestock on hand. It should also be helpful in making farm plans for 1938.

BADGERS (Taxidea taxus) AS OCCASIONAL PESTS IN AGRICULTURE

The badger (Taxidea taxus). because of its strong propensity for digging, is considered North America's fossorial carnivore, feeding mostly on ground squirrels, pocket gophers, and mice throughout much of the western and midwestern continent. Badger excavations, primarily in search of food, produce mounds and deep holes which can damage alfalfa and other crops and damage farm equipment and water systems. Depredations include poultry, waterfowl, and eggs. Overall, the badger is considered a relatively minor vertebrate pest. As a furbearer it is considered a renewable natural resource. Most local pest problems are currently reduced through leghold trapping and shooting. Habitat modification through continuous rodent control is effective and a long-lasting badger control method.

Criterios para el dimensionamiento de redes de riego robustas frente a cambios en la alternativa de cultivos

En los años 50 y 60 del siglo XX se produjo en Europa un cambio en la concepción de los sistemas de riego, en los cuales se pasó del regadío por superficie al presurizado y con ello del riego por turnos al riego a la demanda. Las ventajas de este nuevo sistema de riego dieron lugar a una gran expansión de las redes colectivas de riego a presión, especialmente en los países del arco mediterráneo y del Sur de Europa (Francia, España, Italia, Portugal y Grecia). Desde entonces el riego presurizado a la demanda ha tenido una evolución permanente, en la que han mejorado los equipos y las técnicas de aplicación del riego, siempre con una clara orientación hacía el incremento de la productividad. Esta evolución unida a los vaivenes de los mercados, al abaratamiento de los transportes y la globalización, y a las subvenciones agrícolas, ha propiciado que las alternativas de cultivos previstas hayan sufrido cambios. El cambio de la alternativa de cultivos hacia otros más exigentes desde el punto de vista de las necesidades hídricas tiene como consecuencia el aumento de los consumos, circunstancia para cual debe estar capacitada la red. Otros fenómenos como el cambio climático, de amplio interés a día de hoy, presentan algunos escenarios en lo que se prevé un incremento de las temperaturas que unido a una reducción en las precipitaciones, supondría también que se elevarían las necesidades de riego de los cultivos. Todas estas circunstancias deben ser contempladas en la redacción de los proyectos de transformación de nuevas zonas regables y en los de modernización de las existentes. Las redes de riego deben estar dimensionadas para poder atender dichos incrementos de consumo. La fortaleza de la red para atender variaciones en las demandas de agua se convierte por tanto en una premisa del proyecto. Dicha fortaleza se puede conseguir de formas diferentes y a costos distintos, puesto que en el proceso de dimensionamiento estadístico de los caudales circulantes en punta de campaña intervienen muchas variables y parámetros de riego. En la presente tesis doctoral se analiza en detalle el estado del arte en la materia, se efectúa un análisis de la función específica y la influencia en el cálculo de cada uno de los parámetros, se establece un procedimiento de actuación que optimice el dimensionamiento de la red colectiva para que ésta disponga de la robustez necesaria para hacer frente a incrementos potenciales de consumo de agua sobre la previsiones de base del proyecto y se establecen los criterios, rangos y combinaciones de parámetros que permiten dotar a la red de la fortaleza necesaria de la manera más eficiente posible. During the 1950s and 1960s the design of irrigation systems in Europe underwent change. Traditional surface irrigation was replaced by pressure irrigation, with the delivery method shifting from a scheduled type to an on-demand one. The advantages obtained with this new system led to a significant development of on-demand pressurised irrigation districts, especially in the Southern countries (France, Greece, Italy, Portugal and Spain). On-demand pressurised irrigation has since evolved in a continuous manner in which, with the purpose of gaining productivity, on-farm equipment and automation instruments have seen improvements. Such developments, along with market fluctuations, reductions in transport costs, globalisation and the influence of agricultural subsidies, have resulted in changes in the crop pattern. The farming of new crops may require more water and the consumption may become greater. In addition to this, other phenomena, such as the frequently-debated effects of climate change, reveal scenarios in which an increase in temperatures and the accompanying reductions in rainfall are expected. One consequence of this would be an increase in irrigation requirements and subsequent impact on irrigation networks. All such circumstances should be taken into account in both the design of new irrigation districts and the upgrading of the existing ones. Irrigation networks should be of a size that allows them to meet increases in consumption. The robustness of the network, defined as its capacity to absorb increments in water requirements, becomes a key point to be taken into account in the design phase. Given that there are several parameters that influence the calculus of design flows, such robustness may be obtained in different ways and at varying costs. In the context of this, the thesis reviews the state of the art, analyses the role and influence of each parameter, establishes a procedure for checking the design and robustness of on-demand irrigation networks, and sets design criteria for selecting the most effective range and combination of parameters that provide the network with such robustness.

Die Landwirtschaft in den Vereinigten Staaten von Nord-Amerika : mit besonderer Berücksichtigung der für die einheimische Landwirtschaft brauchbaren technischen Methoden ... /

Decorative paper covered boards.

Agriculture machinery service technician /

Project staff: Sharon Schwarz, Tom Wiles, William Schreck, Steve Johnson.

Aplicadora autopropulsada de productos fitosanitarios para cultivos hortícolas con control mecánico o electrónico de la dosis

La aplicadora está basada en la utilización de un sistema autopropulsado de tracción mecánica, el cual dispone de un sistema de rodadura de cadenas. Sobre dicho equipo de tracción, se dispondrán de los diversos elementos necesarios para realizar la aplicación de productos fitosanitarios, como por ejemplo un equipo de pulverización, nebulización, etc. El equipo podrá ser utilizado como pulverizador, atomizador, nebulizador y sistema de distribución acoplado a una, instalación fija de productos fitosanitarios de un invernadero, controlando en todas las ocasiones la dosis aplicada sin depender del operario encargado de la aplicación. Este dispositivo presenta una alternativa más eficaz en lo referente a la uniformidad de la distribución, lo que genera una disminución en las dosis aplicadas beneficiando las condiciones de seguridad del operario y el impacto sobre el medio ambiente.