BIOMECHANICAL BEHAVIOR OF THE SYSTEM PROSTHESIS/DENTAL IMPLANT: ANALYSIS BY THE PHOTOELASTICITY METHOD

One of the main reasons for the failure in dental implant treatments is the overload, which can cause bone resorption and later, the osseointegration loss in the implant. Therefore, the aim of this study was to analyze the tension generated around dental implants in the rehabilitation of three mandible posterior teeth, varying the connection type, the disposal, and the quantity of implants. The photoelasticity method was used in order to accomplish it. Through photoelasticity, the quantity and localization of the tensions around the implants in the different studied groups were compared (three straight line implants, three offset placement implants, two implants with a mesial cantilever, and two implants with a pontic). The results showed that the tension quantity and disposition around the dental implants of the connection external hexagon and internal hexagon were similar in all groups. In the group where the cantilever was used, an increase of the tension around the implant, adjacent to the cantilever, was observed. From the results it is concluded that the type of connection used in this study did not influence the tension quantity and distribution around the implants; however, the prosthetic configuration with the cantilever use, led to an increase of the tension around the implant, adjacent to the cantilever.

Genetic relatedness of commensal strains of Candida albicans carried in the oral cavity of patients' dental prosthesis users in Brazil

The aim of this study is to describe the degree of yeast-colonization in diabetic and hemodialysed-users of dental prostheses. Individuals (306) were examined using an oral rinse technique in order to evaluate the incidence of yeast-carriage, and genotype of C. albicans. Yeasts were isolated from 68.4% (91/133) individual's dental prostheses users. Dental prostheses were found to be a significant factor for the yeast colonization (P < 0.05). Overall, the intensity of carriage was higher in diabetic patients as compared with health and hemodialysed individuals (P < 0.05). The isolation rates were: C. albicans (51.7%), C. parapsilosis (20.9%), C. tropicalis (14.3%), C. glabrata (6.6%), C. krusei (3.3%), C. rugosa (1.1%), and Pichia (Pichia ohmeri, 2.2%). Ready-To-Go RAPD Analysis Beads were used and primer OPJ 6 distinguished the C. albicans isolates found in prostheses users. All the isolates were grouped into 11 RAPD profiles in four main clusters and, the average S (AB) for the entire collection of 47 C. albicans isolates were 0.779 +/- 0.178. Over 85% of isolates had a similarity level higher than or equal to 0.8 reinforcing the idea that the use of dental prostheses, independently of the host's clinical condition, probably provides the necessary conditions for these strains to gain a growth-specific advantage over others.

Leakage of the arterial prosthesis of an Impella RVAD

Seromas occurring around a vascular graft are a rare complication. We report a life-threatening plasma leakage that occurred through the polytetrafluoroethylene vascular prosthesis of an Impella right ventricular assist device (Impella RD [Impella Cardiosystems GmbH, Aachen, Germany]) implanted in a 62-year-old patient with acute right ventricular failure after cardiac transplantation. The leakage became progressively massive. Weaning the patient from the right ventricular assist device was not possible. The prosthesis was thus wrapped within a pericardial patch to contain the leakage. Three days later the patient could be successfully weaned and the pump was removed. The clinical evolution was favorable.

Flight testing of an augmented separation management system providing separation protection during failure of the central communication network

Future air traffic management concepts often involve the proposal of automated separation management algorithms that replaces human air traffic controllers. This paper proposes a new type of automated separation management algorithm (based on the satisficing approach) that utilizes inter-aircraft communication and a track file manager (or bank of Kalman filters) that is capable of resolving conflicts during periods of communication failure. The proposed separation management algorithm is tested in a range of flight scenarios involving during periods of communication failure, in both simulation and flight test (flight tests were conducted as part of the Smart Skies project). The intention of the conducted flight tests was to investigate the benefits of using inter-aircraft communication to provide an extra layer of safety protection in support air traffic management during periods of failure of the communication network. These benefits were confirmed.

Failure of the plasma-sprayed coating of lanthanum hexaluminate

Lanthanum magnesium hexaluminate (LaMgAl11O19, LMA) is an attractive material for thermal barrier coatings (TBCs), and the failure of its coating was studied in this work by thermal cycling, X-ray diffraction, dilatometric measurement and thermal gravimetric-differential thermal analysis. The dilatometric measurement indicates that even though the bulk material of LMA has a higher sintering-resistance than the typical TBC material, i.e. yttria-stabilized zirconia (YSZ), the plasma sprayed coating of LMA has two serious contractions due to the re-crystallization of LMA and phase transitions of alumina.

Avoiding Negligence and Profusion: The failure of the Joint-Stock form in the Anglo-Indian Tea Trade, 1840-1870

In the 19th century, firms operating in the Anglo-Indian tea trade were organised using a variety ownership forms including the partnership, joint-stock and a combination of the two known as the Managing agency. Faced with both an increasing need for fixed capital and high agency costs caused by the distance between owners and managers, the firms adapted and increasingly adopted the hybrid managing agency model to overcome these problems. Using new data from Calcutta and Bengal Commercial Registers and detailed case studies of the Assam Company and Gillanders, Arbuthnot and Co, this paper demonstrates that British entrepreneurs did not see the choice of ownership as a dichotomy or firm boundaries as fixed, but instead innovatively drew on the strengths of different forms of ownership to compete and grow successfully.

Analysis of the late correspondence between our administration and Great Britain & France, with an attempt to show what are the real causes of the failure of the negotiation.

Ten pieces originally published in the Columbian Centinel. A later edition with imprint New York, Printed for E. Sargeant, 1809, contains two additional pieces.

Civilian casualties – do we really care? The failure of the revolution in military affairs of non-lethal weapons in the U.S., Russia and Israel

Causing civilian casualties during military operations has become a much politicised topic in international relations since the Second World War. Since the last decade of the 20th century, different scholars and political analysts have claimed that human life is valued more and more among the general international community. This argument has led many researchers to assume that democratic culture and traditions, modern ethical and moral issues have created a desire for a world without war or, at least, a demand that contemporary armed conflicts, if unavoidable, at least have to be far less lethal forcing the military to seek new technologies that can minimise civilian casualties and collateral damage. Non-Lethal Weapons (NLW) – weapons that are intended to minimise civilian casualties and collateral damage – are based on the technology that, during the 1990s, was expected to revolutionise the conduct of warfare making it significantly less deadly. The rapid rise of interest in NLW, ignited by the American military twenty five years ago, sparked off an entirely new military, as well as an academic, discourse concerning their potential contribution to military success on the 21st century battlefields. It seems, however, that except for this debate, very little has been done within the military forces themselves. This research suggests that the roots of this situation are much deeper than the simple professional misconduct of the military establishment, or the poor political behaviour of political leaders, who had sent them to fight. Following the story of NLW in the U.S., Russia and Israel this research focuses on the political and cultural aspects that have been supposed to force the military organisations of these countries to adopt new technologies and operational and organisational concepts regarding NLW in an attempt to minimise enemy civilian casualties during their military operations. This research finds that while American, Russian and Israeli national characters are, undoubtedly, products of the unique historical experience of each one of these nations, all of three pay very little regard to foreigners’ lives. Moreover, while it is generally argued that the international political pressure is a crucial factor that leads to the significant reduction of harmed civilians and destroyed civilian infrastructure, the findings of this research suggest that the American, Russian and Israeli governments are well prepared and politically equipped to fend off international criticism. As the analyses of the American, Russian and Israeli cases reveal, the political-military leaderships of these countries have very little external or domestic reasons to minimise enemy civilian casualties through fundamental-revolutionary change in their conduct of war. In other words, this research finds that employment of NLW have failed because the political leadership asks the militaries to reduce the enemy civilian casualties to a politically acceptable level, rather than to the technologically possible minimum; as in the socio-cultural-political context of each country, support for the former appears to be significantly higher than for the latter.

Balancing the role of the dental school in teaching, research and patient care; including care for underserved areas

Inequalities within dentistry are common and are reflected in wide differences in the levels of oral health and the standard of care available both within and between countries and communities. Furthermore there are patients, particularly those with special treatment needs, who do not have the same access to dental services as the general public. The dental school should aim to recruit students from varied backgrounds into all areas covered by the oral healthcare team and to train students to treat the full spectrum of patients including those with special needs. It is essential, however, that the dental student achieves a high standard of clinical competence and this cannot be gained by treating only those patients with low expectations for care. Balancing these aspects of clinical education is difficult. Research is an important stimulus to better teaching and better clinical care. It is recognized that dental school staff should be active in research, teaching, clinical work and frequently administration. Maintaining a balance between the commitments to clinical care, teaching and research while also taking account of underserved areas in each of these categories is a difficult challenge but one that has to be met to a high degree in a successful, modern dental school.

Efficient but destructive: a test of the dental wash technique using secondary electron microscopy

The Boyadjian et al dental wash technique provides, in certain contexts, the only chance to analyze and quantify the use of plants by past populations and is therefore an important milestone for the reconstruction of paleodiet. With this paper we present recent investigations and results upon the influence of this method on teeth. A series of six teeth from a three thousand years old Brazilian shellmound (Jabuticabeira II) was examined before and after dental wash. The main focus was documenting the alteration of the surfaces and microstructures. The status of all teeth were documented using macrophotography, optical light microscopy, and atmospheric Secondary Electron Microscopy (aSEM) prior and after applying the dental wash technique. The comparison of pictures taken before and after dental wash showed the different degrees of variation and damage done to the teeth but, also, provided additional information about microstructures, which have not been visible before. Consequently we suggest that dental wash should only be carried out, if absolutely necessary, after dental pathology, dental morphology and microwear studies have been accomplished. (C) 2010 Elsevier Ltd. All rights reserved.