Accounting for the dissociating properties of organic chemicals in LCIA: an uncertainty analysis applied to micropollutants in the assessment of freshwater ecotoxicity

In life cycle impact assessment (LCIA) models, the sorption of the ionic fraction of dissociating organic chemicals is not adequately modeled because conventional non-polar partitioning models are applied. Therefore, high uncertainties are expected when modeling the mobility, as well as the bioavailability for uptake by exposed biota and degradation, of dissociating organic chemicals. Alternative regressions that account for the ionized fraction of a molecule to estimate fate parameters were applied to the USEtox model. The most sensitive model parameters in the estimation of ecotoxicological characterization factors (CFs) of micropollutants were evaluated by Monte Carlo analysis in both the default USEtox model and the alternative approach. Negligible differences of CFs values and 95% confidence limits between the two approaches were estimated for direct emissions to the freshwater compartment; however the default USEtox model overestimates CFs and the 95% confidence limits of basic compounds up to three orders and four orders of magnitude, respectively, relatively to the alternative approach for emissions to the agricultural soil compartment. For three emission scenarios, LCIA results show that the default USEtox model overestimates freshwater ecotoxicity impacts for the emission scenarios to agricultural soil by one order of magnitude, and larger confidence limits were estimated, relatively to the alternative approach.

Persistent organic chemicals of emerging environmental concern

The use of chemicals and chemical derivatives in agriculture and industry has contributed to their accumulation and persistence in the environment. Persistent organic pollutants (POPs) are among the environmental pollutants of most concern since, when improperly handled and disposed, they can persist in the environment, bioaccumulate through the food web, and may create serious public health and environmental problems. Development of an effective degradation process has become an area of intense research. The physical/chemical methods employed, such as volatilization, evaporation, photooxidation, adsorption, or hydrolysis, are not always effective, are very expensive, and, sometimes, lead to generation/disposal of other contaminants. Biodegradation is one of the major mechanisms by which organic contaminants are transformed, immobilized, or mineralized in the environment. A clear understanding of the major processes that affect the interactions between organic contaminants, microorganisms, and environmental matrix is, thus, important for determining persistence of the compounds, for predicting in situ transformation rates, and for developing site remediation. Information on their risks and impact and occurrence in the different environmental matrices is also important, in order to attenuate their impact and apply the appropriate remediation process. This chapter provides information on the fate of pesticides and polycyclic aromatic hydrocarbons (PAHs), their impact, bioavailability, and biodegradation. © Springer Science+Business Media Dordrecht 2014.

Application of chemicals on Ficus carica L. transplanted

This research deals with the effects of chemicals on, transplantation of Ficus carica L. cv. Roxo de Valinhos. Fig plants were sprayed with Transplantone (naphthaleneacetamide plusnaphtaleneacetic acid) 10 g/1 , Oed green (oxyethylene docosanol) 40 ml/1, Good-rite peps (polyethylene polysulfite) 0,6 ml/1, and Mobileaf 200 ml/1. A check treatment and aereduction to half of leaf area were also established. Reduction of leaf area and application of oxyethylene docosanol promoted higher plant survival. The chemicals did not affect the growth of transplanted plants. Auxins constituents of Transplantone increased leaf number of fig plants.

Human Exposure to Endocrine-Disrupting Chemicals and Prenatal Risk Factors for Cryptorchidism and Hypospadias: A Nested Case-Control Study

BACKGROUND. Exposure to xenoestrogens during pregnancy may disturb the development and function of male sexual organs. OBJECTIVE. In this study we aimed to determine whether the combined effect of environmental estrogens measured as total effective xenoestrogen burden (TEXB) is a risk factor for male urogenital malformations. METHODS. In a case-control study, nested in a mother-child cohort (n = 702) established at Granada University Hospital, we compared 50 newborns with diagnosis of cryptorchidism and/or hypospadias with 114 boys without malformations matched by gestational age, date of birth, and parity. Controls did not differ from the total cohort in confounding variables. TEXB and levels of 16 organochlorine pesticides were measured in placenta tissues. Characteristics of parents, pregnancy, and birth were gathered by questionnaire. We used conditional and unconditional regression models to estimate odds ratios (ORs) and 95% confidence intervals (CIs). RESULTS. TEXB from organohalogenated compounds was detectable in 72% and 54% of case and control placentas, respectively. Compared with controls, cases had an OR for detectable versus non-detectable TEXB of 2.82 (95% CI, 1.10-7.24). More pesticides were detected in cases than in controls (9.34 +/- 3.19 vs. 6.97 +/- 3.93). ORs for cases with detectable levels of pesticides, after adjusting for potential confounders in the conditional regression analysis, were o,p'-DDT (OR = 2.25; 95% CI, 1.03-4.89), p,p'-DDT (OR = 2.63; 95% CI, 1.21-5.72), lindane (OR = 3.38; 95% CI, 1.36-8.38), mirex (OR = 2.85; 95% CI, 1.22-6.66), and endosulfan alpha (OR = 2.19; 95% CI, 0.99-4.82). Engagement of mothers in agriculture (OR = 3.47; 95% CI, 1.33-9.03), fathers' occupational exposure to xenoestrogens (OR = 2.98; 95% CI, 1.11-8.01), and history of previous stillbirths (OR = 4.20; 95% CI, 1.11-16.66) were also associated with risk of malformations. CONCLUSIONS We found an increased risk for male urogenital malformations related to the combined effect of environmental estrogens in placenta.

Sulfur and strontium isotope composition of the Llobregat River (NE Spain): Tracers of natural and anthropogenic chemicals in stream waters

The use of sulfur and strontium isotopes as tracers for the source/s of water contaminants have been applied to the water of the Llobregat River system (NE Spain). Surface water samples from June 1997 were collected from the Llobregat River and its main tributaries and creeks. The chemistry of most stream waters are controlled mainly by the weathering of Tertiary chemical sediments within the drainage basin. The largest variation in delta(34)S values were found in the small creeks with values ranging from -9.9 to 15parts per thousand, whilst in the main river channels values ranged from 6.3 to 12.4parts per thousand. The Sr-87/Sr-86 ratio for dissolved strontium ranged from 0.70795 for a non-polluted site to 0.70882 for a polluted one. Most of the waters with high NO3 and low Ca/Na ratio converge to the same Sr-87/Sr-86 value, pointing to dominant pollutant end member contribution or a mixing of pollutants with an isotopic composition around 0.7083-0.7085. Although the concentration of the natural inputs in the river for sulfate and strontium are high, as a result of the sulfate outcrops within the geology of the basin, their isotopic characteristics suggest that they can be used as a discriminating device in water pollution problems. However to establish the detailed characteristics of the isotopes as geochemical tools, specific high-resolution case studies are necessary in small areas, where the inputs are well known.

Estrogenic activity assessment of environmental chemicals using in vitro assays: identification of two new estrogenic compounds.

Environmental chemicals with estrogenic activities have been suggested to be associated with deleterious effects in animals and humans. To characterize estrogenic chemicals and their mechanisms of action, we established in vitro and cell culture assays that detect human estrogen receptor [alpha] (hER[alpha])-mediated estrogenicity. First, we assayed chemicals to determine their ability to modulate direct interaction between the hER[alpha] and the steroid receptor coactivator-1 (SRC-1) and in a competition binding assay to displace 17ss-estradiol (E(2)). Second, we tested the chemicals for estrogen-associated transcriptional activity in the yeast estrogen screen and in the estrogen-responsive MCF-7 human breast cancer cell line. The chemicals investigated in this study were o,p'-DDT (racemic mixture and enantiomers), nonylphenol mixture (NPm), and two poorly analyzed compounds in the environment, namely, tris-4-(chlorophenyl)methane (Tris-H) and tris-4-(chlorophenyl)methanol (Tris-OH). In both yeast and MCF-7 cells, we determined estrogenic activity via the estrogen receptor (ER) for o,p'-DDT, NPm, and for the very first time, Tris-H and Tris-OH. However, unlike estrogens, none of these xenobiotics seemed to be able to induce ER/SRC-1 interactions, most likely because the conformation of the activated receptor would not allow direct contacts with this coactivator. However, these compounds were able to inhibit [(3)H]-E(2) binding to hER, which reveals a direct interaction with the receptor. In conclusion, the test compounds are estrogen mimics, but their molecular mechanism of action appears to be different from that of the natural hormone as revealed by the receptor/coactivator interaction analysis.

Optimal Usage of De-Icing Chemicals when Scraping Ice, Final Report of Project HR 391, 2003

Optimal Usage of De-Icing Chemicals when Scraping Ice, Final Report of Project HR 391

Transgenic plant factories for the production of biopolymers and plateform chemicals

In the mid-to long-term, resource constraints will force society to cover a significant share of the future demand for fuels, materials and chemicals by renewable resources. This trend is already visible in the increasing conversion of carbohydrates and plant oils to fuels, chemicals, and polymers. In this perspective, we discuss current efforts and ideas to produce platform chemicals and polymers directly in transgenic plants.

Modification de la composition des cigarettes durant te XXe siècle: rôle de l'industrie du tabac et effet sur la dépendance tabagique [Chemicals added to cigarettes and their effects on tobacco dependence]

This paper summarizes data on the factors involved in addiction and dependence to cigarettes. Nicotine has been intensively studied by the tobacco industry, for instance for its addictive effect at the lowest possible rates. The addition of diammonium phosphate and urea produces an alcalinization of the pH of cigarette smoke, and promotes the absorption and the trans-membrane passage of nicotine. The taste, the smell of smoke, and the visual aspect of the pack of cigarettes are also sensory components that promote addiction. Finally, menthol, sugar, cocoa and liquorice added to cigarettes also play a role in dependence and addiction to cigarettes by, for instance, making an anesthetic effect on the airways.

Optimal Usage of De-Icing Chemicals when Scraping Ice, November 2003

One of the challenges that faces the winter maintainer is how much chemical to apply to the road under given conditions. Insufficient chemical can lead to the road surface becoming slick, and the road thus becoming unsafe. In all likelihood, additional applications will have to be made, requiring additional effort and use of resources. However, too much chemical can also be bad. While an excess of chemical will ensure (in most circumstances) that a safe road condition is achieved, it may also result in a substantial waste of chemical (with associated costs for this waste) and in ancillary damage to the road itself and to the surrounding environment. Ideally, one should apply what might be termed the “goldilocks” amount of chemical to the road: Not too much, and not too little, but just right. Of course the reality of winter maintenance makes achieving the “goldilocks” application rate somewhat of a fairy tale. In the midst of a severe storm, when conditions are poor and getting worse, the last thing on a plow operator’s mind is a minute adjustment in the amount of chemical being applied to the road. However, there may be considerable benefit and substantial savings to be achieved if chemical applications can be optimized to some degree, so that wastage is minimized without compromising safety. The goal of this study was to begin to develop such information through a series of laboratory studies in which the force needed to scrape ice from concrete blocks was measured, under a variety of chemical application conditions.