Determination of skin friction in strong pressure-gradient equilibrium and near-equilibrium turbulent boundary layers

The conventional Clauser-chart method for determination of local skin friction in zero or weak pressure-gradient turbulent boundary layer flows fails entirely in strong pressure-gradient situations. This failure occurs due to the large departure of the mean velocity profile from the universal logarithmic law upon which the conventional Clauser-chart method is based. It is possible to extend this method,even for strong pressure-gradient situations involving equilibrium or near-equilibrium turbulent boundary layers by making use of the so-called non-universal logarithmic laws. These non-universal log laws depend on the local strength of the pressure gradient and may be regarded as perturbations of the universal log law.The present paper shows that the modified Clauser-chart method, so developed, yields quit satisfactory results in terms of estimation of local skin friction in strongly accelerated or retarded equilibrium and near-equilibrium turbulent boundary layers that are not very close to relaminarization or separation.

Emprego da energia solar para pré-aquecimento de água de reposição de caldeira.

Apresenta-se uma avaliação técnico-econômica para o préaquecimento solar da água de reposição em caldeiras de sistemas de vapor abertos. São empregados, para compor um estudo de caso, os dados de uma indústria de laticínios de médio porte situada próximo da cidade do Rio de Janeiro. Quarenta e oito simulações computacionais do sistema de aquecimento solar (SAS) foram realizadas em TRNSYS, correspondendo aos 5% melhores resultados econômicos de uma série de 2.700 simulações mais simples (método φ-f-chart), programados em MATLAB. Foram empregados dados horários de ano típico meteorológico (TMY) para a cidade do Rio de Janeiro. O ganho econômico foi baseado no consumo evitado dos três combustíveis mais comuns na indústria de laticínios, enquanto o custo de investimento foi composto a partir de valores comerciais e da literatura. Os resultados da avaliação econômica mostraram-se desfavoráveis para a substituição de óleo combustível, favoráveis no caso de caldeiras a gás natural, condicionado a existência de subsídios, e bem competitivos para a substituição de GLP. A eficiência térmica do sistema mostrou ser o parâmetro técnico chave para o desempenho econômico, consequentemente, uma vez que a eficiência se mostrou inversamente proporcional tanto ao volume do reservatório quanto à área de coletores, não há uma configuração ótima para o sistema. Não obstante, os resultados permitiram a proposição de políticas públicas para incentivar o uso da energia solar na indústria leiteira e, consequentemente, contribuir para a preservação ambiental.

马蹄形过水断面临界水深的直接计算法

马蹄形过水断面是无压隧洞较常采用的断面形式之一,水力计算中临界水深的求解无显函数公式,传统的试算法或查图法不仅计算过程繁琐复杂,而且计算精度不高。该文通过对马蹄形断面临界流方程的数学变换,并对本文引入的无量纲参数与相对临界水深的关系分析及数值计算,应用逐步优化拟合原理,得到标准Ⅰ、Ⅱ型马蹄形断面临界水深的直接计算式。实例计算及误差分析表明:在工程实用范围内该公式最大相对误差仅为0.8%,且该式物理概念清晰明确、公式形式简捷,为工程设计及水工设计手册的编制提供有益的参考。

Trophodynamics and stability of regional scale ecosystems in the Northeast Atlantic

This study addresses the long-term stability of three trophic groupings in the Northeast Atlantic at regional scales. The most abundant taxa representing phytoplankton, herbivorous copepods, and carnivorous zooplankton were examined from the Continuous Plankton Recorder database. Multivariate control charts using a Bray–Curtis similarity metric were used to assess whether fluctuations within trophic groupings were within or beyond the expected variability. Two evaluation periods were examined: annual changes between 1960 and 1999 (2000–2009 baseline) and recent changes between 2000 and 2009 (1960–1999 baseline). The trends over time in abundance/biomass of trophic levels were region-specific, especially in carnivorous copepods, where abundance did not mirror trends in the overall study area. The stability of phytoplankton was within the expected limits, although not in 2008 and 2009. Higher trophic levels were less stable, perhaps reflecting the added complexity of interactions governing their abundance. In addition, some regions were consistently less stable than others. Correlations in stability between adjacent trophic levels were positive at large marine ecosystem scale but generally non-significant at regional scales. The study suggests that certain regions may be particularly vulnerable to periods of instability in community structure. The benefits of using the control chart method rather than other multivariate measures of plankton dynamics are discussed.

Efectividad de la ketamina en depresión bipolar: revisión sistemática de la literatura

Introducción: Aunque el hallazgo clínico más distintivo del Trastorno Afectivo Bipolar es el ánimo patológicamente elevado, este no suele ser el estado de ánimo prevalente de la enfermedad. La fase depresiva del trastorno o depresión bipolar es más crónica, conlleva a un mayor deterioro de la funcionalidad y representa un reto terapéutico habitual. En la actualidad, el manejo farmacológico de la depresión bipolar suele consistir en combinaciones de al menos dos medicamentos distintos, incluyendo estabilizadores del afecto (litio y anticonvulsivantes), antipsicóticos atípicos y antidepresivos. El objetivo central de este trabajo es evaluar la efectividad de la Ketamina en la depresión bipolar. Métodos: Revisión sistemática de la literatura de artículos que proporcionen información sobre la eficacia de la Ketamina en la fase depresiva del Trastorno Bipolar. Resultados: De los 147 artículos arrojados por la búsqueda, dos cumplieron los criterios de selección (n=33). En comparación con placebo, ketamina tiene un efecto antidepresivo rápido y duradero, incluso en pacientes que han recibido más de 3 medicamentos previamente. No se reportaron efectos adversos severos durante los estudios. Discusión. La evidencia actual apunta a que la ketamina es útil para el manejo de la depresión bipolar, incluso cuando es resistente al tratamiento, es segura y puede tener cierto efecto antisuicida. Es necesario ampliar la evidencia existente.

A.S.T.M. manual on presentation of data : including Supplement A ... Supplement B ... Tables of squares and square roots /

Manual "originally issued in 1933; two supplements covering additonal material ... issued separately in 1935 ... combining this material in one volume and amplifying certain sections of the text"--Fore. to second printing, March, 1937.

The use of solar colletor for heating and electricity for a single family house

The presented work is related to the use of solar energy for the needs of heating and electricity for a single house located in Poland. Electricity will provided by energy conversion in the turbine by means of Organic Rankine Cycle (ORC), in which the operating medium (water heated in solar collector) is heating refrigerator in the heating exchanger. The solar installation is integrated with heat accumulator and wood boiler, which is used in the situation that collector is not enough to fill requirements of thermal comfort. There are chosen also all the necessary components of the system. In the work is also performed the economic assessment, by F chart method, to evaluate the profitability of the project, taking into total costs and savings.

A method for predicting rain-induced instability of an individual slope

Awareness to avoid losses and casualties due to rain-induced landslide is increasing in regions that routinely experience heavy rainfall. Improvements in early warning systems against rain-induced landslide such as prediction modelling using rainfall records, is urgently needed in vulnerable regions. The existing warning systems have been applied using stability chart development and real-time displacement measurement on slope surfaces. However, there are still some drawbacks such as: ignorance of rain-induced instability mechanism, mislead prediction due to the probabilistic prediction and short time for evacuation. In this research, a real-time predictive method was proposed to alleviate the drawbacks mentioned above. A case-study soil slope in Indonesia that failed in 2010 during rainfall was used to verify the proposed predictive method. Using the results from the field and laboratory characterizations, numerical analyses can be applied to develop a model of unsaturated residual soils slope with deep cracks and subject to rainwater infiltration. Real-time rainfall measurement in the slope and the prediction of future rainfall are needed. By coupling transient seepage and stability analysis, the variation of safety factor of the slope with time were provided as a basis to develop method for the real-time prediction of the rain-induced instability of slopes. This study shows the proposed prediction method has the potential to be used in an early warning system against landslide hazard, since the FOS value and the timing of the end-result of the prediction can be provided before the actual failure of the case study slope.

Improved Analysis Method for Wave-Induced Pipeline Stability on Sandy Seabed

The existing Det Norske Veritas DNV Recommended Practice RP E305 for pipeline on-bottom stability is mainly based on the pipe–soil interaction model reported by Wagner et al. in 1987, and the wake model reported by Lambrakos et al. in 1987, to calculate the soil resistance and the hydrodynamic forces upon pipeline, respectively. Unlike the methods in the DNV Practice, in this paper, an improved analysis method is proposed for the on-bottom stability of a submarine pipeline, which is based on the relationships between Um/ gD 0.5 and Ws / D2 for various restraint conditions obtained by the hydrodynamic loading experiments, taking into account the coupling effects between wave, pipeline, and sandy seabed. The analysis procedure is illustrated with a detailed flow chart. A comparison is made between the submerged weights of pipeline predicted with the DNV Practice and those with the new method. The proposed analysis method may provide a helpful tool for the engineering practice of pipeline on-bottom stability design.

A hitchhiker's guide to assessing young people's physical activity : deciding what method to use

Researchers and practitioners interested in assessing physical activity in  children are often faced with the dilemma of what instrument to use. While there is a plethora of physical activity instruments to choose from, there is currently no guide regarding the suitability of common assessment instruments. The purpose of this paper is to provide a user’s guide for selecting physical activity assessment instruments appropriate for use with children and adolescents. While recommendations regarding specific instruments are not provided, the guide offers information about key attributes and considerations for the use of eight physical activity assessment approaches: heart rate monitoring; accelerometry; pedometry; direct observation; self-report; parent report; teacher report; and diaries/logs. Attributes of instruments and other factors to be considered in the selection of assessment instruments include: population (age); sample size; respondent burden; method/delivery mode; assessment time frame; physical activity information required (data output); data management; measurement error; cost (instrument and administration) and other limitations. A decision flow chart has been developed to assist researchers and practitioners to select an appropriate method of assessing physical activity. Five real-life scenarios are presented to illustrate this process in light of key instrument attributes. It is important that researchers, practitioners and policy makers understand the strengths and limitations of different methods of assessing physical activity, and are guided on selection of the most appropriate instrument/s to suit their needs.

Identification of concurrent control chart patterns with singular spectrum analysis and learning vector quantization

Identification of unnatural control chart patterns (CCPs) from manufacturing process measurements is a critical task in quality control as these patterns indicate that the manufacturing process is out-of-control. Recently, there have been numerous efforts in developing pattern recognition and classification methods based on artificial neural network to automatically recognize unnatural patterns. Most of them assume that a single type of unnatural pattern exists in process data. Due to this restrictive assumption, severe performance degradations are observed in these methods when unnatural concurrent CCPs present in process data. To address this problem, this paper proposes a novel approach based on singular spectrum analysis (SSA) and learning vector quantization network to identify concurrent CCPs. The main advantage of the proposed method is that it can be applied to the identification of concurrent CCPs in univariate manufacturing processes. Moreover, there are no permutation and scaling ambiguities in the CCPs recovered by the SSA. These desirable features make the proposed algorithm an attractive alternative for the identification of concurrent CCPs. Computer simulations and a real application for aluminium smelting processes confirm the superior performance of proposed algorithm for sets of typical concurrent CCPs.

Slope stability analysis for filled slopes using finite element limit analysis method

This paper uses the finite element upper and lower bound limit analysis to assess the stability of slopes mostly found in embankment cases where frictional materials are filled on purely cohesive undrained clay. For comparison purposes, the commonly used stability assessment method, limit equilibrium method (LEM) is also employed. The final results for both methods are then presented in the form of comprehensive chart solutions for the convenience of practicing engineers during preliminary slope designs. The failure mechanism will also be discussed in this paper. Ultimately, it should be noted that finite element limit analysis method holds the upper hand as its prior assumptions are not required. Thus, the obtained failure mechanism from the slope stability analysis will be more realistic. Hence, it will provide a better understanding for the slope failure surface. Therefore, engineers should design more carefully when the LEM is applied to the slopes with frictional materials filled on purely cohesive undrained clay. © 2014 American Society of Civil Engineers.

A new sampling strategy to reduce the effect of autocorrelation on a control chart

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Radiographic and safety details of vertebral body stenting: results from a multicenter chart review

BACKGROUND Up to one third of BKP treated cases shows no appreciable height restoration due to loss of both restored height and kyphotic realignment after balloon deflation. This shortcoming has called for an improved method that maintains the height and realignment reached by the fully inflated balloon until stabilization of the vertebral body by PMMA-based cementation. Restoration of the physiological vertebral body height for pain relief and for preventing further fractures of adjacent and distant vertebral bodies must be the main aim for such a method. A new vertebral body stenting system (VBS) stabilizes the vertebral body after balloon deflation until cementation. The radiographic and safety results of the first 100 cases where VBS was applied are presented. METHODS During the planning phase of an ongoing international multicenter RCT, radiographic, procedural and followup details were retrospectively transcribed from charts and xrays for developing and testing the case report forms. Radiographs were centrally assessed at the institution of the first/senior author. RESULTS 100 patients (62 with osteoporosis) with a total of 103 fractured vertebral bodies were treated with the VBS system. 49 were females with a mean age of 73.2 years; males were 66.7 years old. The mean preoperative anterior-middle-posterior heights were 20.3-17.6-28.0 mm, respectively. The mean local kyphotic angle was 13.1[degree sign]. The mean preoperative Beck Index (anterior edge height/posterior edge height) was 0.73, the mean alternative Beck Index (middle height/posterior edge height) was 0.63. The mean postoperative heights were restored to 24.5-24.6-30.4 mm, respectively. The mean local kyphotic angle was reduced to 8.9[degree sign]. The mean postoperative Beck Index was 0.81, the mean alternative one was 0.82. The overall extrusion rate was 29.1%, the symptomatic one was 1%. In the osteoporosis subgroup there were 23.8% extrusions. Within the three months followup interval there were 9% of adjacent and 4% of remote new fractures, all in the osteoporotic group. CONCLUSIONS VBS showed its strengths especially in realignment of crush and biconcave fractures. Given that fracture mobility is present, the realignment potential is sound and increases with the severity of preoperative vertebral body deformation.

The Sumner line of position furnished ready to lay down upon the chart by means of tables of simultaneous hour angle and azimuth of celestial bodies. Latitude 60æ N. to 60æ S.--declination 27æ N. to 27æ S.

"The plan of arrangement and scope of these tables, as well as the method of using them in navigation, were conceived by Mr. G.W. Littehales, C.E. Hydrographic office, Washington D.C."--Pref., p.iii.