Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

Estudo da obtenção de cerâmica composta de alumina e beta alumina sódica utilizando-se resíduo cerâmico de velas de ignição e pó químico de extintores de incêndio

Ceramic materials the alumina base are large industrial applications. They are required for these products, specific characteristics obtained by following strict criteria during the manufacturing process. However, after life, not always these products are reused by a suitable waste management process. In ceramist context, advance research aimed at the reuse of waste aimed at obtaining ceramics and composite materials, with marked reduction of conventional raw materials. Aiming to generate scientific, technological and environmental contribution, this work studied to obtain a composite of alumina ceramic (Al2O3) and sodium beta alumina (NaAl11O17 ), and as starting materials the residue of the ceramic insulator of spark plugs, as a source alumina (Al2O3) powder and unusable sodium bicarbonate (NaHCO3) of fire extinguishers, as a source of sodium oxide (Na2O). The final ceramic product was obtained from a conventional mixture of sodium aluminum oxide in appropriate molar proportions. Sample spark plugs were obtained, discarded by lifetime, specific to a manufacturer, which, after passing through mechanical stress (grinding, magnetic purification, washing, drying and grinding the high energy), which resulted in residue powder with ceramic content of 84.34 % alumina (Al2O3), found by FRX chemical analysis, the phases present and identified by DRX. The dry chemical fire extinguisher, baking soda-based (NaHCO3) with expired, was obtained through direct collection of the waste generated during maintenance. Subjected to heat treatment at 120 °C , the NaHCO3 powder was decomposed in sodium oxide ( Na2O), which, subjected to chemical analysis (FRX) and mineralogical (DRX) revealed a content of 86.62 % sodium oxide (Na2O) . In the following steps the experimental procedure, chemical formulations were made on a molar basis of the starting material (1:9, 1:10 and 1:11 de Na2O/ Al2O3) inclusion of additives, milling parameters, sieve analysis, dilatometry, conformation of specimens, sintering in firing steps at 800 °C , 1000 °C and 1.200 °C with varying stays 30 , 60 and 120 minutes in each of the levels. The characterization of the final product was made by the following physical tests: water absorption, porosity, linear shrinkage, mineralogical analysis by DRX and microstructural analysis by MEV. A higher formation of sodium beta alumina (NaAl11O17), in sintered specimens in levels of 1.200 °C and 120 minutes, despite the prevailing coexistence of alpha phase alumina (Al2O3). From the results obtained opens up prospects for the reuse of waste studied in this work, the potter context and in other technological areas.

Manejo químico de plantas adultas de Digitaria insularis com glyphosate isolado e em mistura com chlorimuronethyl ou quizalofop-p-tefuril em área de plantio direto

O objetivo deste trabalho foi avaliar a eficácia do herbicida glyphosate, isolado e em mistura com chlorimuron-ethyl ou quizalofop-p-tefuril, e o efeito da adição de óleo mineral à calda de glyphosate e chlorimuron-ethy no controle de plantas adultas de Digitaria insularis, em área sob sistema de plantio direto. Foram desenvolvidos dois experimentos, em condições de campo, um de novembro de 2005 a fevereiro de 2006 e outro de novembro de 2006 a janeiro de 2007, em Jaboticabal (SP). O delineamento experimental foi o de blocos ao acaso, em esquema fatorial, com quatro repetições. No primeiro experimento, foram avaliadas oito combinações (Fator A) entre o glyphosate (0,72; 1,44; 2,16 e 2,88 kg ha-1) e o chlorimuron-ethyl (0 e 10 g ha-1), três doses (Fator B) de óleo mineral (0; 0,5 e 1,0 L ha-1) e uma testemunha mantida infestada sem a aplicação de herbicida. No segundo, foram estudadas seis associações (Fator A) entre o glyphosate (1,44; 2,16 e 2,88 kg ha-1) e o quizalofop-p-tefuril (0 e 120 g ha-1) e um tratamento de quizalofop-p-tefuril (120 g ha-1) isolado, combinados com aplicações sequenciais (Fator B) de glyphosate (0; 0,72 e 1,44 kg ha-1), pulverizado 15 dias após a primeira a aplicação, além de uma testemunha infestada sem a aplicação de herbicida. Nas avaliações iniciais, no experimento de 2005/ 2006, em plantas pulverizadas com as maiores doses de glyphosate, isolado ou em mistura ao chlorimuron, havia injúrias visuais severas, com classificação do controle de bom (71% a 80%) a muito bom (81% a 90%). Com o decorrer do tempo, as plantas rebrotaram revelando seu potencial de recuperação e a ineficácia dos herbicidas no controle definitivo desta espécie. A adição de óleo mineral à calda de glyphosate e chlorimuron não contribuiu para o controle de D. insularis. No outro experimento, o quizalofop isolado e a sua associação ao glyphosate, combinados à aplicação sequencial de 1,44 kg ha-1 de glyphosate, resultaram em melhor controle da planta daninha.

Análise químico-farmacêutica de cefazolina sódica em pó liofilizado para solução injetável

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise químico-farmacêutica de teicoplanina em pó liofilizado

Pós-graduação em Ciências Farmacêuticas - FCFAR

Informe Anual del Laboratorio Químico para Abonos y Alimentos Concentrados para Animales Domesticos, Rio Piedras, P.R

Mode of access: Internet.

Evaluación del efecto de cal y urea en la sobrevivencia de P. solanacearum E.F. Smith raza dos causante del moko bacteriano en musáceas

Con el objetivo de determinar el efecto de cal, urea y la combinación de ambos en la sobrevivencia del moko bacteriano en plantaciones de Musáceas, se desarrolló en la finca TICOMO en el Km 9 carretera Managua-El Crucero en el período de Octubre del 95 a Julio del 96 el presente estudio de investigación, el cual se dividió en dos etapas: una etapa de campo que incluyó metodología para la realización de los tratamientos, formas de muestreo de suelo y período para muestrear. La otra etapa se realizó en Laboratorio y consistió en la realización de pruebas bioquímicas para la identificación de la bacteria, métodos de siembra y conteos de colonias. Dentro del mismo período se realizó una encuesta a los productores del departamento de Rivas. Se realizaron análisis económicos de los tratamientos y se compararon con el producto químico Glifosato. Como resultado final de la Evaluación se obtuvo que la urea reduce en un 93.89% las colonias de bacterias iniciales, en segundo termino la cal disminuyó las colonias de bacterias en un 88.29%, la combinación de ambos tratamientos aminoró en un 86.5% el número de colonias de bacterias y el testigo redujo el 71.86% de la población. En general la Urea P.S el tratamiento más eficaz para bajar las poblaciones de bacterias en menor tiempo comparado con los otros tratamientos; cabe señalar que con sólo el saneamiento en la plantación la bacteria sin ningún tipo de tratamiento puede disminuir sus poblaciones, pero significará esperar mayor tiempo para que la bacteria descienda sus poblaciones y se atrasaría la época de resiembra, quedando a criterio del productor el utilizar o no sólo el saneamiento. Los resultados de las encuestas reflejan que los productores reconocen la enfermedad en sus distinto síntomas, la mayoría sabe como se transmite y como se puede prevenir pero no cómo controlar. Sin la debida Asistencia Técnica y la falta de información acerca de las enfermedades e indicarles la importancia de las medidas fitosanitarias, los productores tendrán siempre los mismos problemas de enfermedades en sus plantaciones

Tratamento químico de sementes de paineira.

2009

Controle químico da ferrugem do álamo.

2010

Controle químico das principais doenças foliares da cultura do sorgo.

2007

Alternativas de controle químico de plantas daninhas na cultura do milho.

2000

Controle químico de fungos associados as sementes de sorgo e protecao contra fungos do solo.

2000

Controle químico da Helmintosporiose (Exserohilum turcicum) do sorgo.

2003

Controle químico da antracnose do sorgo.

2009

Controle químico de doenças na cultura do milho: aspectos a serem considerados na tomada de decisão sobre aplicação.

2009