Gonadic Sperm Reserve in Buffaloes Created under Tropical Conditions

The objective of the present study was quantifying the spermatic production per gram and daily rate of the testicular parenchyma. Testis of 12 crossbred Murrah buffaloes aged 24 to 48 months created under extensive conditions in the State of São Paulo/Brazil were analyzed. Animals were divided into groups based on the testicular shape (long and long-moderate) and testicular sides (right and left) and the studied parameters were: length and testicular width, weight and volume of the albuginea and mediastinum and net weight of the testicular parenchyma, gonadic sperm reserves, spermatic production/g of testicular parenchyma, daily spermatic production/g, total daily spermatic production, resulting into the values: 8.16 +/- 0.87 and 4.29 +/- 0.50 cm; 9.09 +/- 1.91 g and 8.77 +/- 1.88 mL; 0.97 +/- 0.39 g and 0.90 +/- 0.38 mL; 112.91 +/- 18.85 g; 14.32 x 10(9) +/- 0.15; 13.42 x 10(6) +/- 0.17; 27.40 x 10(6) +/- 0.35 and 2.92 x 10(9) +/- 0.30, registering no difference between right and left testis in relation to the parameters (P>0.05). There was no relation between testicular biometry and spermatic production (P>0.05). According to the obtained values, all animals were considered sexually mature and presented an efficient spermatic production per gram of testicular parenchyma and total daily production.

Leistungsfähigkeit und Robustheit der Endzuchtgruppe aus dem Zuchtprogramm der "Witzenhäuser Landschaftspflegeziege"

Ziegenrassen, die in Deutschland in der Landschaftspflege eingesetzt werden, besitzen vorwiegend den Charakter einer intensiven Produktionsausrichtung. Das vorherrschende marginale Futterangebot auf Magerrasen-Biotopen kann die hohen Anforderungen auf das Fütterungsniveau der Tiere nicht erfüllen. Angeführt durch diese Ausgangssituation, begann das Fachgebiet Internationale Nutztierzucht und -haltung der Universität Kassel in Witzenhausen mit dem "Zuchtprogramm der Witzenhäuser Landschaftspflegeziege". Ziel dieser Untersuchung war es, die Leistungsfähigkeit und Robustheit der Endzuchtgruppe aus dem Zuchtprogramm über einen längeren Zeitraum (2001 bis 2003) anhand von definierten Merkmalen zu erfassen und zu dokumentieren. Alle Merkmale wurden zum selben Zeitpunkt ebenfalls an einer Kaschmirziegenherde, einer der drei Ursprungsrassen, zum Vergleich erhoben. Ausgangspunkt der Untersuchung, neben dem Hauptuntersuchungsareal des Naturschutzgebiets Ebenhöhe-Liebenberg, war die Lehr- und Versuchsbetrieb der Universität Kassel in Witzenhausen in Neu-Eichenberg. Achtung: Die Seitenzählung der Printausgabe ist mit der Online-Publikation nicht identisch.

Maternal offspring behaviour in curraleiro pé duro naturalized cattle in brazil

The objective of the present study consisted of describing dam and calf suckling behaviour of Curraleiro Pé Duro cattle. In this study, 38 mother-offspring pairs and one mother-offspring-orphan trio were observed for 10 hours daily during three consecutive days spaced every four months over a period of one year. After identification,theanimalswereobserved under field conditions where calf posture and the number of sucklingepisodes(NS),meansucklingduration(MSD),total suckling duration per day (TSD) as well as natural weaning of these animals were recorded. The model assessed the effects of calf sex and age as well as feeding time. Suckling episodes (70.6%) had a duration of one to five minutes and the calf that suckled in the inverted parallel position had greater chances of success during suckling (99.5%); the younger animals had a shorter mean suckling duration (4.0±0.6 minutes) than the older ones (7.5±1.2 minutes) but they showed a higher number of suckling episodes (6.29±1.00 vs. 1.33±0.04 feeds in 10 hours for young and older calves). Only the factor age in the firstthree months was significant for NS,MSD,and TSD;males and females had similar suckling episode length and distribution. While these animals show some traits similar to other cattle breeds such as feeding their calves early in the morning and late in the afternoon, the dams spend large periods of the day away from their calves and suckling is more frequent but for shorter periods of time compared with other breeds. Other unique features such as allo-suckling and formation of day-long crèches are observed in this breed. © 2013 Sociedade Brasileira de Zootecnia;.

Genetic parameters for scrotal circumference, breeding soundness examination and sperm defects in young Nellore bulls

A total of 51,161 records of scrotal circumference measurements at 18 mo of age (SCI 8) and 17,648 records of sperm defects and breeding soundness of Nellore bulls (mean age of 22.5 mo), raised under extensive conditions, were analyzed to estimate coefficients of heritability and genetic correlations of morphological semen traits by Bayesian inference. The observed semen traits were classified as minor (MID). major (MAD), and total sperm defects (TD). The animals were classified according to breeding soundness as satisfactory and unsatisfactory potential breeders. The (co)variance components and breeding values were estimated by Gibbs sampling using the GIBBS2F90 program under an animal model that included contemporary group as fixed effect, age of animal as linear covariate, and direct additive genetic effects as random effects. Heritabilities of 0.40 ± 0.02, 0.16 ± 0.02, 0.04 ± 0.01, 0.15 ± 0.01, and 0.10 ± 0.01 were obtained for SCI8, MID, MAD, TD, and breeding soundness, respectively. The SC18 showed a positive and moderate correlation with breeding soundness (0.56 ± 0.04) and a negative and low correlation with MID (-0.23 ± 0.03), MAD (-0.16 ± 0.02), and TD (-0.24 ± 0.02). In conclusion, scrotal circumference showed the best response to selection among the traits studied and was favorably correlated with breeding soundness and sperm morphology in young Nellore bulls. © 2013 American Society of Animal Science. All rights reserved.

Distúrbios comportamentais em ruminantes não associados a doenças: origem, significado e importância

O estudo científico do comportamento animal frente às distintas modificações do ambiente (inanimado ou não) onde os mesmos estão sendo criados constitui o principal objetivo da etologia. Por outro lado, muitas doenças que acometem os ruminantes também cursam produzindo diversas alterações no comportamento desses animais; portanto, os profissionais que trabalham com ruminantes precisam reconhecer o que vem a ser um comportamento anormal, decorrente do empobrecimento ambiental associado ou não a erros alimentares e que resulta em prejuízos ao bem-estar dos animais (p.ex. confinamentos com superlotação, falta de sombra nas pastagens, volumosos finamente moídos) daqueles oriundos de doenças ou estados carenciais, como por exemplo, a depravação do apetite causada pelas deficiências de sódio, cobalto e de fibra fisicamente efetiva. O propósito dessa revisão é discutir sobre os principais desvios comportamentais verificados nos ruminantes domésticos criados em sistemas intensivos ou não no Brasil.

Estudo genético quantitativo das características andrológicas de touros jovens da raça Nelore

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da biometria testicular, concentração plasmática de hormônios e minerais em bovinos Nelore variedade Mocha dos 12 aos 24 meses de idade

Pós-graduação em Medicina Veterinária - FMVZ

Utilização de n-alcanos e álcoois de cadeia longa para estimar a ingestão e a digestibilidade em porcos alentejanos

O número diminuto de estudos sobre a técnica dos n-alcanos para porcos Alentejanos motivou o interesse em realizar um ensaio que simulasse as ingestões reais dos animais em Montanheira, no sentido de se compreender melhor o comportamento alimentar destes animais em condições extensivas. Para validar a técnica dos n-alcanos com altos níveis de ingestão em porcos Alentejanos, realizou-se um ensaio in vivo, em caixas metabólicas, com nove machos castrados da raça suína Alentejana com peso médio de 97,64 kg. O delineamento do ensaio experimental foi efectuado segundo o quadrado latino e os suínos foram alimentados três vezes por dia com bolota e luzerna desidratada foi também fornecido a cada animal diariamente, dois bolinhos contendo alcanos sintéticos (C32 e C36). No período experimental foram realizadas colheitas de fezes, refugos e alimento, para se estimar pelo método in vivo a digestibilidade e a ingestão. Calcularam-se as taxas de recuperação fecal para os n-alcanos e para os álcoois de cadeia longa, com o intuito de se identificar aqueles que apresentaram valores mais elevados e semelhantes entre si. O alcano que mostrou apresentar uma taxa de recuperação mais elevada e semelhante aos alcanos sintéticos foi o C29. Em relação aos álcoois de cadeia longa o que mostrou a taxa de recuperação fecal mais alta foi o C280H. Os n-alcanos naturais que melhor forneceram uma estimativa da digestibilidade foram o C25 e o C27. Na estimativa da ingestão os pares de alcanos que mais se aproximaram do valor real foram o C 29: C32 e o C29:C36· ABSTRACT; The miniature number of studies of the n-alkanes for Alentejano pigs motivated the interest in carrying 1hrough an essay that it simulated the real intake of the animal in "Montanheira”, the direction of to better understand the alimentary behavior of these animals in extensive conditions. To validate the technique of the n-alkanes with high levels of intake in Alentejano pigs, an in vivo essay was become fulfilled, in metabolic cages, with nine castred males of Alentejana swine race with average weight of97,64 kg. The delineation of the experimental essay was effected according to latin square and the swines had been fed 1hree times per day with acorn and deshydrated lucerne (Medicago sativa). Also it was supplied to each animal daily, two cookies contend synthetic alkanes (C32 e C36). ln experimental period had been carried through harvests of faeces, rubbishes and foods, to estimate digestibility and intake. The fecal recoveries for the n-alkanes and the long chain alcohols had been calculated, with the intention to identifying those that had presented higher and similar values. The alkane that showed to present a tax of higher and similar fecal recovery to synthetic alkanes was the C29. The long chain alcohol that it showed the higher fecal recovery was the C28OH. The natural alkanes that had better supplied an estimate of digestibility had been the C25 and C27. ln the estimate of intake the pairs of alkanes that been more come close to the real value had been the pair C29:C32 and the C29:C36.

Heritability Estimate and Genetic Correlations of Reproductive Features in Nellore Bulls, Offspring of Super Precocious, Precocious and Normal Cows Under Extensive Farming Conditions

The present work aimed to estimate heritability and genetic correlations of reproductive features of Nellore bulls, offspring of mothers classified as superprecocious (M1), precocious (M2) and normal (M3). Twenty one thousand hundred and eighty-six animals with average age of 21.29 months were used, evaluated through the breeding soundness evaluation from 1999 to 2008. The breeding soundness features included physical semen evaluation (progressive sperm motility and sperm vigour), semen morphology (major, minor and total sperm defects), scrotal circumference (SC), testicular volume (TV) and SC at 18 months of age (SC18). The components of variance, heritability and genetic correlations for and between the features were estimated simultaneously by restricted maximum likelihood, with the use of the vce software system vs 6. The heritability estimates were high for SC18, SC and TV (0.43, 0.63 and 0.54; 0.45, 0.45 and 0.44; 0.42, 0.45 and 0.41, respectively for the categories of mothers M1, M2 and M3) and low for physical and morphological semen aspects. The genetic correlations between SC18 and SC were high, as well as between these variables with TV. High and positive genetic correlations were recorded among SC18, SC and TV with the physical aspects of the semen, although no favourable association was verified with the morphological aspects, for the three categories of mothers. It can be concluded that the mothers sexual precocity did not affect the heritability of their offspring reproduction features.

Sexual Precocity of Nellore Bulls that are Offspring of Super Precocious, Precocious and Normal Cows in Extensive Farming Conditions

Contents The objective of this work was to verify that mothers classified as super precocious (M1) and precocious (M2) produce more precocious bulls than females classified as normal (M3). This study included 21186 animals with an average age of 21.29 +/- 1.77months that underwent a breeding soundness evaluation from 1999 to 2008. Of these animals, 2019, 6059 and 13108 were offspring of M1, M2 and M3 females, respectively. In the breeding soundness examination, the animals were classified as sound for reproduction, sound under a natural mating regime, unsound for reproduction and discarded. To compare the averages obtained for each category of mother within the individual breeding soundness classes, a chi-square test with a 5% error probability was used, considering the effects of year and month of birth and farm. For the three classes of mothers (M1, M2 and M3), 67.26, 67.22 and 64.16% of bull calves were considered sound for reproduction and 19.71, 19.46 and 21.90% were considered unsound for reproduction, respectively. There was no difference in the frequency of animals that were sound for reproduction under the natural breeding regime between the three classes of mothers (8.87, 9.31 and 9.19%, respectively). There was a difference between the numbers of precocious and normal females that were discarded, with frequencies of 4.01 and 4.75%, respectively (p<0.05). There were differences in year and month of birth and farm between super precocious and precocious cows in relation to the breeding soundness classification of the animals. It was concluded that the bull offspring of super precocious and precocious cows presented a higher percentage of approval in the breeding soundness examination than the bull offspring of normal cows, demonstrating that the selection for precocity of females has contributed to an increase in the sexual precocity of the herd in relation to the sexual maturity of bulls.

Heritability Estimate and Genetic Correlations of Reproductive Features in Nellore Bulls, Offspring of Super Precocious, Precocious and Normal Cows Under Extensive Farming Conditions

The present work aimed to estimate heritability and genetic correlations of reproductive features of Nellore bulls, offspring of mothers classified as superprecocious (M1), precocious (M2) and normal (M3). Twenty one thousand hundred and eighty-six animals with average age of 21.29 months were used, evaluated through the breeding soundness evaluation from 1999 to 2008. The breeding soundness features included physical semen evaluation (progressive sperm motility and sperm vigour), semen morphology (major, minor and total sperm defects), scrotal circumference (SC), testicular volume (TV) and SC at 18 months of age (SC18). The components of variance, heritability and genetic correlations for and between the features were estimated simultaneously by restricted maximum likelihood, with the use of the vce software system vs 6. The heritability estimates were high for SC18, SC and TV (0.43, 0.63 and 0.54; 0.45, 0.45 and 0.44; 0.42, 0.45 and 0.41, respectively for the categories of mothers M1, M2 and M3) and low for physical and morphological semen aspects. The genetic correlations between SC18 and SC were high, as well as between these variables with TV. High and positive genetic correlations were recorded among SC18, SC and TV with the physical aspects of the semen, although no favourable association was verified with the morphological aspects, for the three categories of mothers. It can be concluded that the mothers sexual precocity did not affect the heritability of their offspring reproduction features.

Modelling of inflatable rescue boats (IRBs) in surf conditions to reduce injuries

The Inflatable Rescue Boat (IRB) is arguably the most effective rescue tool used by the Australian surf lifesavers. The exceptional features of high mobility and rapid response have enabled it to become an icon on Australia's popular beaches. However, the IRB's extensive use within an environment that is as rugged as it is spectacular, has led it to become a danger to those who risk their lives to save others. Epidemiological research revealed lower limb injuries to be predominant, particularly the right leg. The common types of injuries were fractures and dislocations, as well as muscle or ligament strains and tears. The concern expressed by Surf Life Saving Queensland (SLSQ) and Surf Life Saving Australia (SLSA) led to a biomechanical investigation into this unique and relatively unresearched field. The aim of the research was to identify the causes of injury and propose processes that may reduce the instances and severity of injury to surf lifesavers during IRB operation. Following a review of related research, a design analysis of the craft was undertaken as an introduction to the craft, its design and uses. The mechanical characteristics of the vessel were then evaluated and the accelerations applied to the crew in the IRB were established through field tests. The data were then combined and modelled in the 3-D mathematical modelling and simulation package, MADYMO. A tool was created to compare various scenarios of boat design and methods of operation to determine possible mechanisms to reduce injuries. The results of this study showed that under simulated wave loading the boats flex around a pivot point determined by the position of the hinge in the floorboard. It was also found that the accelerations experienced by the crew exhibited similar characteristics to road vehicle accidents. Staged simulations indicated the attributes of an optimum foam in terms of thickness and density. Likewise, modelling of the boat and crew produced simulations that predicted realistic crew response to tested variables. Unfortunately, the observed lack of adherence to the SLSA footstrap Standard has impeded successful epidemiological and modelling outcomes. If uniformity of boat setup can be assured then epidemiological studies will be able to highlight the influence of implementing changes to the boat design. In conclusion, the research provided a tool to successfully link the epidemiology and injury diagnosis to the mechanical engineering design through the use of biomechanics. This was a novel application of the mathematical modelling software MADYMO. Other craft can also be investigated in this manner to provide solutions to the problem identified and therefore reduce risk of injury for the operators.

Structural behaviour and design of cold-formed steel wall systems under fire conditions

In recent times, light gauge steel framed (LSF) structures, such as cold-formed steel wall systems, are increasingly used, but without a full understanding of their fire performance. Traditionally the fire resistance rating of these load-bearing LSF wall systems is based on approximate prescriptive methods developed based on limited fire tests. Very often they are limited to standard wall configurations used by the industry. Increased fire rating is provided simply by adding more plasterboards to these walls. This is not an acceptable situation as it not only inhibits innovation and structural and cost efficiencies but also casts doubt over the fire safety of these wall systems. Hence a detailed fire research study into the performance of LSF wall systems was undertaken using full scale fire tests and extensive numerical studies. A new composite wall panel developed at QUT was also considered in this study, where the insulation was used externally between the plasterboards on both sides of the steel wall frame instead of locating it in the cavity. Three full scale fire tests of LSF wall systems built using the new composite panel system were undertaken at a higher load ratio using a gas furnace designed to deliver heat in accordance with the standard time temperature curve in AS 1530.4 (SA, 2005). Fire tests included the measurements of load-deformation characteristics of LSF walls until failure as well as associated time-temperature measurements across the thickness and along the length of all the specimens. Tests of LSF walls under axial compression load have shown the improvement to their fire performance and fire resistance rating when the new composite panel was used. Hence this research recommends the use of the new composite panel system for cold-formed LSF walls. The numerical study was undertaken using a finite element program ABAQUS. The finite element analyses were conducted under both steady state and transient state conditions using the measured hot and cold flange temperature distributions from the fire tests. The elevated temperature reduction factors for mechanical properties were based on the equations proposed by Dolamune Kankanamge and Mahendran (2011). These finite element models were first validated by comparing their results with experimental test results from this study and Kolarkar (2010). The developed finite element models were able to predict the failure times within 5 minutes. The validated model was then used in a detailed numerical study into the strength of cold-formed thin-walled steel channels used in both the conventional and the new composite panel systems to increase the understanding of their behaviour under nonuniform elevated temperature conditions and to develop fire design rules. The measured time-temperature distributions obtained from the fire tests were used. Since the fire tests showed that the plasterboards provided sufficient lateral restraint until the failure of LSF wall panels, this assumption was also used in the analyses and was further validated by comparison with experimental results. Hence in this study of LSF wall studs, only the flexural buckling about the major axis and local buckling were considered. A new fire design method was proposed using AS/NZS 4600 (SA, 2005), NAS (AISI, 2007) and Eurocode 3 Part 1.3 (ECS, 2006). The importance of considering thermal bowing, magnified thermal bowing and neutral axis shift in the fire design was also investigated. A spread sheet based design tool was developed based on the above design codes to predict the failure load ratio versus time and temperature for varying LSF wall configurations including insulations. Idealised time-temperature profiles were developed based on the measured temperature values of the studs. This was used in a detailed numerical study to fully understand the structural behaviour of LSF wall panels. Appropriate equations were proposed to find the critical temperatures for different composite panels, varying in steel thickness, steel grade and screw spacing for any load ratio. Hence useful and simple design rules were proposed based on the current cold-formed steel structures and fire design standards, and their accuracy and advantages were discussed. The results were also used to validate the fire design rules developed based on AS/NZS 4600 (SA, 2005) and Eurocode Part 1.3 (ECS, 2006). This demonstrated the significant improvements to the design method when compared to the currently used prescriptive design methods for LSF wall systems under fire conditions. In summary, this research has developed comprehensive experimental and numerical thermal and structural performance data for both the conventional and the proposed new load bearing LSF wall systems under standard fire conditions. Finite element models were developed to predict the failure times of LSF walls accurately. Idealized hot flange temperature profiles were developed for non-insulated, cavity and externally insulated load bearing wall systems. Suitable fire design rules and spread sheet based design tools were developed based on the existing standards to predict the ultimate failure load, failure times and failure temperatures of LSF wall studs. Simplified equations were proposed to find the critical temperatures for varying wall panel configurations and load ratios. The results from this research are useful to both structural and fire engineers and researchers. Most importantly, this research has significantly improved the knowledge and understanding of cold-formed LSF loadbearing walls under standard fire conditions.