Metodologia de análise e diagnóstico de fratura em um componente automotivo sujeito a cargas cíclicas alternadas

The competitiveness of the trade generated by the higher availability of products with lower quality and cost promoted a new reality of industrial production with small clearances. Track deviations at the production are not discarded, uncertainties can statistically occur. The world consumer and the Brazilian one are supported by the consumer protection code, in lawsuits against the products poor quality. An automobile is composed of various systems and thousands of constituent parts, increasing the likelihood of failure. The dynamic and security systems are critical in relation to the consequences of possible failures. The investigation of the failure gives us the possibility of learning and contributing to various improvements. Our main purpose in this work is to develop a systematic, specific methodology by investigating the root cause of the flaw occurred on an axle end of the front suspension of an automobile, and to perform comparative data analyses between the fractured part and the project information. Our research was based on a flaw generated in an automotive suspension system involved in a mechanical judicial cause, resulting in property and personal damages. In the investigations concerning the analysis of mechanical flaws, knowledge on materials engineering plays a crucial role in the process, since it enables applying techniques for characterizing materials, relating the technical attributes required from a respective part with its structure of manufacturing material, thus providing a greater scientific contribution to the work. The specific methodology developed follows its own flowchart. In the early phase, the data in the records and information on the involved ones were collected. The following laboratory analyses were performed: macrography of the fracture, micrography with SEM (Scanning Electron Microscope) of the initial and final fracture, phase analysis with optical microscopy, Brinell hardness and Vickers microhardness analyses, quantitative and qualitative chemical analysis, by using X-ray fluorescence and optical spectroscopy for carbon analysis, qualitative study on the state of tension was done. Field data were also collected. In the analyses data of the values resulting from the fractured stock parts and the design values were compared. After the investigation, one concluded that: the developed methodology systematized the investigation and enabled crossing data, thus minimizing diagnostic error probability, the morphology of the fracture indicates failure by the fatigue mechanism in a geometrically propitious location, a tension hub, the part was subjected to low tensions by the sectional area of the final fracture, the manufacturing material of the fractured part has low ductility, the component fractured in an earlier moment than the one recommended by the manufacturer, the percentages of C, Si, Mn and Cr of the fractured part present values which differ from the design ones, the hardness value of the superior limit of the fractured part is higher than that of the design, and there is no manufacturing uniformity between stock and fractured part. The work will contribute to optimizing the guidance of the actions in a mechanical engineering judicial expertise

Appropriate treatment for Crohn's disease: methodology and summary results of a multidisciplinary international expert panel approach--EPACT.

BACKGROUND/AIMS: For many therapeutic decisions in Crohn's disease (CD), high-grade evidence is lacking. To assist clinical decision-making, explicit panel-based appropriateness criteria were developed by an international, multidisciplinary expert panel. METHODS: 10 gastroenterologists, 3 surgeons and 2 general practitioners from 12 European countries assessed the appropriateness of therapy for CD using the RAND Appropriateness Method. Their assessment was based on the study of a recent literature review of the subject, combined with their own expert clinical judgment. Panelists rated clinical indications and treatment options using a 9-point scale (1 = extremely inappropriate; 9 = extremely appropriate). These scenarios were then discussed in detail at the panel meeting and re-rated. Median ratings and disagreement were used to aggregate ratings into three assessment categories: appropriate (A), uncertain (U) and inappropriate (I). RESULTS: 569 specific indications were rated, dealing with 9 clinical presentations: mild/moderate luminal CD (n = 104), severe CD (n = 126), steroid-dependent CD (n = 25), steroid-refractory CD (n = 37), fistulizing CD (n = 49), fibrostenotic CD (n = 35), maintenance of medical remission of CD (n = 84), maintenance of surgical remission (n = 78), drug safety in pregnancy (n = 24) and use of infliximab (n = 7). Overall, 146 indications (26%) were judged appropriate, 129 (23%) uncertain and 294 (52%) inappropriate. Frank disagreement was low (14% overall) with the greatest disagreement (54% of scenarios) being observed for treatment of steroid-refractory disease. CONCLUSIONS: Detailed explicit appropriateness criteria for the appropriate use of therapy for CD were developed for the first time by a European expert panel. Disease location, severity and previous treatments were the main factors taken into account. User-friendly access to EPACT criteria is available via an Internet site, www.epact.ch, allowing prospective evaluation and improvement of appropriateness of current CD therapy.

Expert system for the assessment of power transformer insulation condition based on type-2 fuzzy logic systems

An efficient expert system for the power transformer condition assessment is presented in this paper. Through the application of Duval`s triangle and the method of the gas ratios a first assessment of the transformer condition is obtained in the form of a dissolved gas analysis (DGA) diagnosis according IEC 60599. As a second step, a knowledge mining procedure is performed, by conducting surveys whose results are fed into a first Type-2 Fuzzy Logic System (T2-FLS), in order to initially evaluate the condition of the equipment taking only the results of dissolved gas analysis into account. The output of this first T2-FLS is used as the input of a second T2-FLS, which additionally weighs up the condition of the paper-oil system. The output of this last T2-FLS is given in terms of words easily understandable by the maintenance personnel. The proposed assessing methodology has been validated for several cases of transformers in service. (C) 2010 Elsevier Ltd. All rights reserved.

Elements of a methodology to assess the alignment of core-values in collaborative networks

Collaborative networks are typically formed by heterogeneous and autonomous entities, and thus it is natural that each member has its own set of core-values. Since these values somehow drive the behaviour of the involved entities, the ability to quickly identify partners with compatible or common core-values represents an important element for the success of collaborative networks. However, tools to assess or measure the level of alignment of core-values are lacking. Since the concept of 'alignment' in this context is still ill-defined and shows a multifaceted nature, three perspectives are discussed. The first one uses a causal maps approach in order to capture, structure, and represent the influence relationships among core-values. This representation provides the basis to measure the alignment in terms of the structural similarity and influence among value systems. The second perspective considers the compatibility and incompatibility among core-values in order to define the alignment level. Under this perspective we propose a fuzzy inference system to estimate the alignment level, since this approach allows dealing with variables that are vaguely defined, and whose inter-relationships are difficult to define. Another advantage provided by this method is the possibility to incorporate expert human judgment in the definition of the alignment level. The last perspective uses a belief Bayesian network method, and was selected in order to assess the alignment level based on members' past behaviour. An example of application is presented where the details of each method are discussed.

Expert supervision based on cases

The paper focuses on taking advantage of large amounts of data that are systematically stored in plants (by means of SCADA systems), but not exploited enough in order to achieve supervisory goals (fault detection, diagnosis and reconfiguration). The methodology of case base reasoning (CBR) is proposed to perform supervisory tasks in industrial processes by re-using the stored data. The goal is to take advantage of experiences, registered in a suitable structure as cam, avoiding the tedious task of knowledge acquisition and representation needed by other reasoning techniques as expert systems. An outlook of CBR terminology and basic concepts are presented. The adaptation of CBR in performing expert supervisory tasks, taking into account the particularities and difficulties derived from dynamic systems, is discussed. A special interest is focused in proposing a general case definition suitable for supervisory tasks. Finally, this structure and the whole methodology is tested in a application example for monitoring a real drier chamber

A Novel Breast Tissue Density Classification Methodology

It has been shown that the accuracy of mammographic abnormality detection methods is strongly dependent on the breast tissue characteristics, where a dense breast drastically reduces detection sensitivity. In addition, breast tissue density is widely accepted to be an important risk indicator for the development of breast cancer. Here, we describe the development of an automatic breast tissue classification methodology, which can be summarized in a number of distinct steps: 1) the segmentation of the breast area into fatty versus dense mammographic tissue; 2) the extraction of morphological and texture features from the segmented breast areas; and 3) the use of a Bayesian combination of a number of classifiers. The evaluation, based on a large number of cases from two different mammographic data sets, shows a strong correlation ( and 0.67 for the two data sets) between automatic and expert-based Breast Imaging Reporting and Data System mammographic density assessment

Testing for potential contextual bias effects during the verification stage of the ACE-V methodology when conducting fingerprint comparisons

This study was conducted to assess if fingerprint specialists could be influenced by extraneous contextual information during a verification process. Participants were separated into three groups: a control group (no contextual information was given), a low bias group (minimal contextual information was given in the form of a report prompting conclusions), and a high bias group (an internationally recognized fingerprint expert provided conclusions and case information to deceive this group into believing that it was his case and conclusions). A similar experiment was later conducted with laypersons. The results showed that fingerprint experts were influenced by contextual information during fingerprint comparisons, but not towards making errors. Instead, fingerprint experts under the biasing conditions provided significantly fewer definitive and erroneous conclusions than the control group. In contrast, the novice participants were more influenced by the bias conditions and did tend to make incorrect judgments, especially when prompted towards an incorrect response by the bias prompt.

Programa pacient expert en obesitat

Objectiu general: desenvolupament del Programa Pacient Expert en obesitat. Objectius específics: es basaran amb el compliment de la dieta i l’activitat física, les mesures fisiològiques, la capacitat d’autogestió i el grau de satisfacció. Metodologia: - Àmbit d’estudi: Atenció Primària en Salut. - Disseny: estudi quantitatiu de tipus assaig clínic aleatoritzat. - Participants: adults amb obesitat. - Obtenció de dades: per l’anàlisi de variància per mesures repetides, l’anàlisi del discurs i l’observació estructurada. Limitacions de l’estudi: possible buit de dades per la pèrdua de participants o per la falta de continuïtat d’aquests.

The use of the SeDeM diagram expert system for the formulation of Captopril SR matrix tablets by direct compression

The SeDeM Diagram Expert System has been used to study excipients, Captopril and designed formulations for their galenic characterization and to ascertain the critical points of the formula affecting product quality to obtain suitable formulations of Captopril Direct Compression SR Matrix Tablets. The application of the Sedem Diagram Expert System enables selecting excipients with in order to optimize the formula in the preformulation and formulation studies. The methodology is based on the implementation of ICH Q8, establishing the design space of the formula with the use of experiment design, using the parameters of the SeDeM Diagram Expert System as system responses.

Practical guidance and considerations for transitioning patients from oxcarbazepine or carbamazepine to eslicarbazepine acetate--Expert opinion.

There is currently a lack of guidance on methodology and special considerations for transitioning patients from oxcarbazepine (OXC) or carbamazepine (CBZ) to eslicarbazepine acetate (ESL), if deemed clinically necessary. An advisory panel of epilepsy experts was convened to share their experience on the use of adjunctive ESL in clinical practice and to provide practical recommendations to help address this gap. When changing over from OXC to ESL, an OXC:ESL dose ratio of 1:1 should be employed to calculate the ESL target dose, and the changeover can take place overnight. No changes to comedication are required. Since CBZ has a different mechanism of action to ESL and is a stronger inducer of cytochrome P450 (CYP) enzymes, the transitioning of patients from CBZ to ESL requires careful consideration on a patient-by-patient basis. In general, a CBZ:ESL dose ratio of 1:1.3 should be employed to calculate the ESL target dose, and patients should be transitioned over a minimum period of 1-2weeks. Special considerations include adjustment of titration schedule and target dose in elderly patients and those with hepatic or renal impairment and potential adjustment of comedications metabolized by CYP enzymes. In summary, due to structural distinctions between ESL, OXC, and CBZ, which affect mechanism of action and tolerability, there are clinical situations in which it may be appropriate to consider transitioning patients from OXC or CBZ to ESL. Changing patients over from OXC to ESL is generally more straightforward than transitioning patients from CBZ to ESL, which requires careful consideration.

A feature-based object-oriented expert system to model and support product design

In this paper a computer program to model and support product design is presented. The product is represented through a hierarchical structure that allows the user to navigate across the product’s components, and it aims at facilitating each step of the detail design process. A graphical interface was also developed, which shows visually to the user the contents of the product structure. Features are used as building blocks for the parts that compose the product, and object-oriented methodology was used as a means to implement the product structure. Finally, an expert system was also implemented, whose knowledge base rules help the user design a product that meets design and manufacturing requirements.

Exploration of implicit theories in the formation of expert opinion in portuguese criminal law

This dissertation examines different aspects involved in the formation of psychologists’ expert opinion in the Portuguese criminal justice system, more precisely, as this opinion is reflected in assessment reports. The present dissertation is comprised of three qualitative studies, the first sought to provide a general portrait of a sample of 106 forensic psychological reports as to their overall quality as measured in terms of relevance and coherence. Results show that the formal markers of quality are present in the sample analysed, a certain number of weaknesses have been observed, notably concerning the internal coherence of the reports as well as the relevance of the information reported on. The second study explored the opinions of 17 Portuguese judges and state prosecutors concerning the use they make of this type of forensic report. It appears that they consider these reports to be useful and very credible, specially so when they have been produced under the auspices of the National Institute of Legal Medicine and Forensic Sciences, which is the state forensic institution. Furthermore, it appears that judges and prosecutors were particularly interested in data that allowed for a personalised portrait of the assessee. The third study sought to better comprehend the conceptual bases on which psychologists construct their reports. To this end, an exploratory study was undertaken with a sample of key-actors; the analysis of their interviews shows that they define their judicial mandate as well as the basic concepts that are associated to this mandate in different ways. A theoretical framework provided by an implicit theories model was used to help understand these results.

A Novel Breast Tissue Density Classification Methodology

It has been shown that the accuracy of mammographic abnormality detection methods is strongly dependent on the breast tissue characteristics, where a dense breast drastically reduces detection sensitivity. In addition, breast tissue density is widely accepted to be an important risk indicator for the development of breast cancer. Here, we describe the development of an automatic breast tissue classification methodology, which can be summarized in a number of distinct steps: 1) the segmentation of the breast area into fatty versus dense mammographic tissue; 2) the extraction of morphological and texture features from the segmented breast areas; and 3) the use of a Bayesian combination of a number of classifiers. The evaluation, based on a large number of cases from two different mammographic data sets, shows a strong correlation ( and 0.67 for the two data sets) between automatic and expert-based Breast Imaging Reporting and Data System mammographic density assessment

Expert supervision based on cases

The paper focuses on taking advantage of large amounts of data that are systematically stored in plants (by means of SCADA systems), but not exploited enough in order to achieve supervisory goals (fault detection, diagnosis and reconfiguration). The methodology of case base reasoning (CBR) is proposed to perform supervisory tasks in industrial processes by re-using the stored data. The goal is to take advantage of experiences, registered in a suitable structure as cam, avoiding the tedious task of knowledge acquisition and representation needed by other reasoning techniques as expert systems. An outlook of CBR terminology and basic concepts are presented. The adaptation of CBR in performing expert supervisory tasks, taking into account the particularities and difficulties derived from dynamic systems, is discussed. A special interest is focused in proposing a general case definition suitable for supervisory tasks. Finally, this structure and the whole methodology is tested in a application example for monitoring a real drier chamber