Is it possible to dissociate ‘liking’ and ‘wanting’ for foods in humans? A novel experimental procedure

Berridge's model (e.g. [Berridge KC. Food reward: Brain substrates of wanting and liking. Neurosci Biobehav Rev 1996;20:1–25.; Berridge KC, Robinson T E. Parsing reward. Trends Neurosci 2003;26:507–513.; Berridge KC. Motivation concepts in behavioral neuroscience. Physiol Behav 2004;81:179–209]) outlines the brain substrates thought to mediate food reward with distinct ‘liking’ (hedonic/affective) and ‘wanting’ (incentive salience/motivation) components. Understanding the dual aspects of food reward could throw light on food choice, appetite control and overconsumption. The present study reports the development of a procedure to measure these processes in humans. A computer-based paradigm was used to assess ‘liking’ (through pleasantness ratings) and ‘wanting’ (through forced-choice photographic procedure) for foods that varied in fat (high or low) and taste (savoury or sweet). 60 participants completed the program when hungry and after an ad libitum meal. Findings indicate a state (hungry–satiated)-dependent, partial dissociation between ‘liking’ and ‘wanting’ for generic food categories. In the hungry state, participants ‘wanted’ high-fat savoury > low-fat savoury with no corresponding difference in ‘liking’, and ‘liked’ high-fat sweet > low-fat sweet but did not differ in ‘wanting’ for these foods. In the satiated state, participants ‘liked’, but did not ‘want’, high-fat savoury > low-fat savoury, and ‘wanted’ but did not ‘like’ low-fat sweet > high-fat sweet. More differences in ‘liking’ and ‘wanting’ were observed when hungry than when satiated. This procedure provides the first step in proof of concept that ‘liking’ and ‘wanting’ can be dissociated in humans and can be further developed for foods varying along different dimensions. Other experimental procedures may also be devised to separate ‘liking’ and ‘wanting’.

Experimental investigation on low-temperature fatigue crack propagation in offshore structural steel A131 under random sea ice loading

An apparatus of low-temperature controlling for fatigue experiments and its crack measuring system were developed and used for offshore structural steel A131 under conditions of both low temperature and random sea ice. The experimental procedures and data processing were described, and a universal random data processing software for FCP under spectrum loading was written. Many specific features of random ice-induced FCP which differed with constant amplitude FCP behaviours were proposed and temperature effect on ice-induced FCP was pointed out with an easily neglected aspect in designing for platforms in sea ice emphasized. In the end, differences of FCP behaviours between sea ice and ocean wave were presented.

Do experimental subjects favor their friends?

Ideally we would like subjects of experiments to be perfect strangers so that the situation they face at the lab is not just part of a long run interaction. Unfortunately, it is not easy to reach those conditions and experimenters try to mitigate any effects from those out-of-the-lab relationships by, for instance, randomly matching subjects. However, even if this type of procedure is used, there is a positive probability that a subject may face a friend or an acquaintance. We find evidence that social proximity between subjects is irrelevant to experiment results in dictator games. Thus, although ideal conditions are not met, relations between subjects do not contaminate the results of experiments.

Effects of the essential oil from Citrus aurantium L. in experimental anxiety models in mice

Citrus aurantium L. is popularly used to treat anxiety, among other indications suggesting central nervous system action. Previous studies showed anxiolytic effect in the essential oil from peel in mice evaluated on the elevated plus maze [Carvalho-Freitas, M.I.R., Costa, M., 2002. Anxiolytic and sedative effects of extracts and essential oil from Citrus aurantium L. Biological and Pharmaceutical Bulletin 25, 1629-1633.]. In order to better characterize the activity of the essential oil, it was evaluated in two other experimental models: the light-dark box and the marble-burying test, respectively related to generalized anxiety disorder and to obsessive compulsive disorder. Mice were treated acutely by oral route 30 min (single dose) or once a day for 15 days (repeated doses) before experimental procedures. In light-dark box test, single treatment with essential oil augmented the time spent by mice in the light chamber and the number of transitions between the two compartments. There were no observed alterations in the parameters evaluated in light-dark box after repeated treatment. Otherwise, single and repeated treatments with essential oil were able to suppress marble-burying behavior. At effective doses in the behavioral tests, mice showed no impairment on rotarod procedure after both single and repeated treatments with essential oil, denoting absence of motor deficit. Results observed in marble-burying test, related to obsessive compulsive disorder, appear more consistent than those observed in light-dark box. (c) 2005 Elsevier B.V. All rights reserved.

Bone healing pattern in surgically created circumferential defects around submerged implants: an experimental study in dog

Objective: To describe the healing of marginal defects below or above 1 mm of dimension around submerged implants in a dog model.Material and methods: In 12 Labrador dogs, all mandibular premolars and first molars were extracted bilaterally. After 3 months of healing, full-thickness flaps were elevated in the edentulous region of the right side of the mandible. Two recipient sites were prepared and the marginal 5mm were widened to such an extent to obtain, after implant installation, a marginal gap of 0.5mm at the mesial site (small defect) and of 1.25mm at the distal site (large defect). Titanium healing caps were affixed to the implants and the flaps were sutured allowing a fully submerged healing. The experimental procedures were subsequently performed in the left side of the mandible. The timing of the experiments and sacrifices were planned in such a way to obtain biopsies representing the healing after 5, 10, 20 and 30 days. Ground sections were prepared and histomorphometrically analyzed.Results: The filling of the defect with newly formed bone was incomplete after 1 month of healing in all specimens. Bone formation occurred from the base and the lateral walls of the defects. A larger volume of new bone was formed in the large compared with the small defects. Most of the new bone at the large defect was formed between the 10- and the 20-day period of healing. After 1 month of healing, the outline of the newly formed bone was, however, located at a similar distance from the implant surface (about 0.4mm) at both defect types. Only minor newly formed bone in contact with the implant, starting from the base of the defects, was seen at the large defects (about 0.8mm) while a larger amount was detected at the small defects (about 2.2 mm).Conclusion: Marginal defects around titanium implants appeared to regenerate in 20-30 days by means of a distance osteogenesis. The bone fill of the defects was, however, incomplete after 1 month.

Regeneração óssea de defeitos circunferenciais criados cirurgicamente ao redor de implantes submersos. Estudo experimental em cães

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do padrão de reparação óssea ao redor de implantes submersos: estudo experimental em cães

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo experimental de um reator de gaseificação em um leito fixo de açaí

Um leito de gaseificação de pequena escala foi projetado, construído e operado com o objetivo de investigar os parâmetros que influenciam o processo de gaseificação de um leito fixo de caroço de açaí. O reator é do tipo topo aberto downdraft estratificado, de dimensões de 15 cm de diâmetro interno por 1,5 m de altura, com isolamento térmico. O gás produzido foi coletado a jusante do leito de gaseificação e condensado para remoção de alcatrão, o qual foi posteriormente quantificado em titulador Karl Fisher. Após remoção do alcatrão o gás foi introduzido em um Micro GC para quantificação dos percentuais molares de H², CO, N² e CH⁴. O perfil de temperatura do leito foi medido com termopares tipo K posicionados ao longo do eixo longitudinal do leito em distâncias de 10 cm. A vazão de ar foi medida com auxilio de um tubo de Pitot e um micromanômetro. As aquisições dos dados de temperatura foram feitas por um data logger e vazão mássica do ar sendo feita usando comunicação RS232 do micromanômetro. Os procedimentos experimentais foram feitos ao longo de 4 horas de operação do leito de gaseificação, com consumo médio de biomassa de 1,6 kg/h, com 6 dados do perfil de temperatura, vazão mássica de ar, perda de carga do leito e concentração dos gases obtidos no processo de gaseificação e quantificação do teor de alcatrão condensável presente no gás. Verificou-se que o gaseificador de leito de açaí pode ser operado através de uma gama bastante ampla de taxas de fluxo de ar de 2 a 5 kg/h, com a quantidade de energia do gás produzido variando de 5 a 15 MJ/h. As concentrações típicas dos gases obtidos no leito foram de 13% de H², 11% de CO, 1,3% de CH⁴. A eficiência máxima de gás frio de 57% e teor médio de alcatrão de 155 g/m³.

Eletrofisiologia da visão em modelo experimental de ratos com diabetes e hipotireoidismo

O diabetes mellitus constitui um problema de saúde pública mundial devido ao seu potencial de morbidade e mortalidade. Esta patologia é caracterizada como uma desordem metabólica com hiperglicemia crônica, resultado de uma deficiência absoluta ou relativa na secreção e/ou ação da insulina. Associado a esse quadro, problemas com a tireoide são frequentemente encontrados em pacientes acometidos por diabetes, principalmente com o avançar da idade. Além disso, há um corpo de conhecimento que descreve que tanto o diabetes quanto o hipotiroidismo provocam isoladamente perdas visuais, no entanto, não há muitas publicações acerca da fisiologia envolvendo em conjunto ambas patologias com as complicações visuais. O presente trabalho objetivou investigar questões relevantes para uma compreensão mais detalhada do quadro de evolução do comprometimento retiniano em modelos animais acometidos concomitantemente por duas doenças: diabetes e hipotireoidismo. Para isso, foram utilizados 50 ratos Wistar machos (Rattus norvegicus), com dois meses de idade, pesando entre 80 a 120 gramas, divididos em quatro grupos: um grupo controle sem procedimentos; um grupo com hipotireoidismo optando por um modelo experimental de tireoidectomia bilateral; um grupo com diabetes, com aplicação de 200 mg/Kg a 2% de Aloxana; e dois grupos com as duas patologias, adotando ambos os procedimentos experimentais, alterando a sequência das patologias em questão. Nos grupos estudados foi utilizado para avaliar as alterações visuais, um método não invasivo amplamente utilizado no meio acadêmico que é o eletrorretinograma (ERG) em diferentes períodos de 30, 45 e 60 dias. Assim, encontramos uma diminuição da amplitude média da onda-a dos animais nos grupos com diabetes e com as duas patologias em todos os registros realizados, os que apresentaram maiores diferenças estatísticas foram em relação ao registro de estocópica máxima, como também diferença no potencial oscilatório de ambos os grupos com as duas patologias. Os resultados obtidos dão suporte à hipótese que as duas patologias concomitantes (diabetes e hipotireoidismo) diminuem significativamente as respostas do ERG.

Bone healing pattern in surgically created circumferential defects around submerged implants: an experimental study in dog

Objective: To describe the healing of marginal defects below or above 1 mm of dimension around submerged implants in a dog model. Material and methods: In 12 Labrador dogs, all mandibular premolars and first molars were extracted bilaterally. After 3 months of healing, full-thickness flaps were elevated in the edentulous region of the right side of the mandible. Two recipient sites were prepared and the marginal 5mm were widened to such an extent to obtain, after implant installation, a marginal gap of 0.5mm at the mesial site (small defect) and of 1.25mm at the distal site (large defect). Titanium healing caps were affixed to the implants and the flaps were sutured allowing a fully submerged healing. The experimental procedures were subsequently performed in the left side of the mandible. The timing of the experiments and sacrifices were planned in such a way to obtain biopsies representing the healing after 5, 10, 20 and 30 days. Ground sections were prepared and histomorphometrically analyzed. Results: The filling of the defect with newly formed bone was incomplete after 1 month of healing in all specimens. Bone formation occurred from the base and the lateral walls of the defects. A larger volume of new bone was formed in the large compared with the small defects. Most of the new bone at the large defect was formed between the 10- and the 20-day period of healing. After 1 month of healing, the outline of the newly formed bone was, however, located at a similar distance from the implant surface (about 0.4mm) at both defect types. Only minor newly formed bone in contact with the implant, starting from the base of the defects, was seen at the large defects (about 0.8mm) while a larger amount was detected at the small defects (about 2.2 mm). Conclusion: Marginal defects around titanium implants appeared to regenerate in 20-30 days by means of a distance osteogenesis. The bone fill of the defects was, however, incomplete after 1 month.

Experimental and analytical investigation of refrigerant and lubricant migration

The off-cycle refrigerant mass migration has a direct influence on the on-cycle performance since compressor energy is necessary to redistribute the refrigerant mass. No studies, as of today, are available in the open literature which experimentally measured the lubricant migration within a refrigeration system during cycling or stop/start transients. Therefore, experimental procedures measuring the refrigerant and lubricant migration through the major components of a refrigeration system during stop/start transients were developed and implemented. Results identifying the underlying physics are presented. The refrigerant and lubricant migration of an R134a automotive A/C system-utilizing a fixed orifice tube, minichannel condenser, plate and fin evaporator, U-tube type accumulator and fixed displacement compressor-was measured across five sections divided by ball valves. Using the Quick-Closing Valve Technique (QCVT) combined with the Remove and Weigh Technique (RWT) using liquid nitrogen as the condensing agent resulted in a measurement uncertainty of 0.4 percent regarding the total refrigerant mass in the system. The determination of the lubricant mass distribution was achieved by employing three different techniques-Remove and Weigh, Mix and Sample, and Flushing. To employ the Mix and Sample Technique a device-called the Mix and Sample Device-was built. A method to separate the refrigerant and lubricant was developed with an accuracy-after separation-of 0.04 grams of refrigerant left in the lubricant. When applying the three techniques, the total amount of lubricant mass in the system was determined to within two percent. The combination of measurement results-infrared photography and high speed and real time videography-provide unprecedented insight into the mechanisms of refrigerant and lubricant migration during stop-start operation. During the compressor stop period, the primary refrigerant mass migration is caused by, and follows, the diminishing pressure difference across the expansion device. The secondary refrigerant migration is caused by a pressure gradient as a result of thermal nonequilibrium within the system and causes only vapor phase refrigerant migration. Lubricant migration is proportional to the refrigerant mass during the primary refrigerant mass migration. During the secondary refrigerant mass migration lubricant is not migrating. The start-up refrigerant mass migration is caused by an imbalance of the refrigerant mass flow rates across the compressor and expansion device. The higher compressor refrigerant mass flow rate was a result of the entrainment of foam into the U-tube of the accumulator. The lubricant mass migration during the start-up was not proportional to the refrigerant mass migration. The presence of water condensate on the evaporator affected the refrigerant mass migration during the compressor stop period. Caused by an evaporative cooling effect the evaporator held 56 percent of the total refrigerant mass in the system after three minutes of compressor stop time-compared to 25 percent when no water condensate was present on the evaporator coil. Foam entrainment led to a faster lubricant and refrigerant mass migration out of the accumulator than liquid entrainment through the hole at the bottom of the U-tube. The latter was observed for when water condensate was present on the evaporator coil because-as a result of the higher amount of refrigerant mass in the evaporator before start-up-the entrainment of foam into the U-tube of the accumulator ceased before the steady state refrigerant mass distribution was reached.

Thin-film elemental analyses for precise characterization of minerals

The Analytical Electron Microscope (AEM), with which secondary X-ray emission from a thin (<150nm), electron-transparent material is measured, has rapidly become a versatile instrument for qualitative and quantitative elemental analyses of many materials, including minerals. With due regard for sources of error in experimental procedures, it is possible to obtain high spatial resolution (~20nm diameter) and precise elemental analyses (~3% to 5% relative) from many silicate minerals. In addition, by utilizing the orientational dependence of X-ray emission for certain multi-substituted crystal structures, site occupancies for individual elements within a unit cell can be determined though with lower spatial resolution. The relative ease with which many of these compositional data may be obtained depends in part on the nature of the sample, but, in general, is comparable to other solid state analytical techniques such as X-ray diffraction and electron microprobe analysis. However, the improvement in spatial resolution obtained with the AEM (up to two orders of magnitude in analysis diameter) significantly enhances interpretation of fine-grained assemblages in many terrestrial or extraterrestrial rocks.

From nucleation to nanowires : a single-step process in reactive plasmas

This feature article introduces a deterministic approach for the rapid, single-step, direct synthesis of metal oxide nanowires. This approach is based on the exposure of thin metal samples to reactive oxygen plasmas and does not require any intervening processing or external substrate heating. The critical roles of the reactive oxygen plasmas, surface processes, and plasma-surface interactions that enable this growth are critically examined by using a deterministic viewpoint. The essentials of the experimental procedures and reactor design are presented and related to the key process requirements. The nucleation and growth kinetics is discussed for typical solid-liquid-solid and vapor-solid-solid mechanisms related to the synthesis of the oxide nanowires of metals with low (Ga, Cd) and high (Fe) melting points, respectively. Numerical simulations are focused on the possibility to predict the nanowire nucleation points through the interaction of the plasma radicals and ions with the nanoscale morphological features on the surface, as well as to control the localized 'hot spots' that in turn determine the nanowire size and shape. This generic approach can be applied to virtually any oxide nanoscale system and further confirms the applicability of the plasma nanoscience approaches for deterministic nanoscale synthesis and processing.

Fluorescence-polarization studies on binding of 4-methylumbelliferyl beta-D-galactopyranoside to Ricinus communis (castor-bean) agglutinin

The binding of Ricinus communis (castor-bean) agglutinin 1 to saccharides was studied by equilibrium dialysis and fluorescence polarization by using the fluorescently labelled sugar 4-methylumbelliferyl beta-D-galactopyranoside. No appreciable change in ligand fluorescence of 4-methylumbelliferyl beta-D-galactopyranoside was considerably polarized on its binding to the lectin. The association constants obtained by Scatchard analysis of equilibrium-dialysis and fluorescence-polarization data do not differ much from each other, and at 25 degrees C, Ka = 2.4 (+/- 0.2) X 10(4)M-1. These values agree reasonably well with that reported in the literature for Ricinus agglutinin 1. The number of binding sites obtained by the different experimental procedures is 1.94 +/- 0.1 per molecule of 120 000 daltons and is equal to the reported value of 2. The consistency in the values of Ka and number of binding sites indicate the absence of additional subsites on Ricinus agglutinin 1 for its specific sugars. In addition, the excellent agreement between the binding parameters obtained by equilibrium dialysis and fluorescence polarization indicate the potential of ligand-fluorescence-polarization measurements in the investigation of lectin-sugar interactions.