Implementation of a probabilistic based framework for safety assessment of existing timber elements

The assessment of existing timber structures is often limited to information obtained from non or semi destructive testing, as mechanical testing is in many cases not possible due to its destructive nature. Therefore, the available data provides only an indirect measurement of the reference mechanical properties of timber elements, often obtained through empirical based correlations. Moreover, the data must result from the combination of different tests, as to provide a reliable source of information for a structural analysis. Even if general guidelines are available for each typology of testing, there is still a need for a global methodology allowing to combine information from different sources and infer upon that information in a decision process. In this scope, the present work presents the implementation of a probabilistic based framework for safety assessment of existing timber elements. This methodology combines information gathered in different scales and follows a probabilistic framework allowing for the structural assessment of existing timber elements with possibility of inference and updating of its mechanical properties, through Bayesian methods. The probabilistic based framework is based in four main steps: (i) scale of information; (ii) measurement data; (iii) probability assignment; and (iv) structural analysis. In this work, the proposed methodology is implemented in a case study. Data was obtained through a multi-scale experimental campaign made to old chestnut timber beams accounting correlations of non and semi-destructive tests with mechanical properties. Finally, different inference scenarios are discussed aiming at the characterization of the safety level of the elements.

Field Equilibrium Finite Elements for Structural Analysis

Many finite elements used in structural analysis possess deficiencies like shear locking, incompressibility locking, poor stress predictions within the element domain, violent stress oscillation, poor convergence etc. An approach that can probably overcome many of these problems would be to consider elements in which the assumed displacement functions satisfy the equations of stress field equilibrium. In this method, the finite element will not only have nodal equilibrium of forces, but also have inner stress field equilibrium. The displacement interpolation functions inside each individual element are truncated polynomial solutions of differential equations. Such elements are likely to give better solutions than the existing elements.In this thesis, a new family of finite elements in which the assumed displacement function satisfies the differential equations of stress field equilibrium is proposed. A general procedure for constructing the displacement functions and use of these functions in the generation of elemental stiffness matrices has been developed. The approach to develop field equilibrium elements is quite general and various elements to analyse different types of structures can be formulated from corresponding stress field equilibrium equations. Using this procedure, a nine node quadrilateral element SFCNQ for plane stress analysis, a sixteen node solid element SFCSS for three dimensional stress analysis and a four node quadrilateral element SFCFP for plate bending problems have been formulated.For implementing these elements, computer programs based on modular concepts have been developed. Numerical investigations on the performance of these elements have been carried out through standard test problems for validation purpose. Comparisons involving theoretical closed form solutions as well as results obtained with existing finite elements have also been made. It is found that the new elements perform well in all the situations considered. Solutions in all the cases converge correctly to the exact values. In many cases, convergence is faster when compared with other existing finite elements. The behaviour of field consistent elements would definitely generate a great deal of interest amongst the users of the finite elements.

Viability of ceramic residues in lime-based mortars

3rd Historic Mortars Conference, 11-14 September 2013, Glasgow, Scotland

A integração do Building Information Modeling (BIM) num projeto de reabilitação

Dissertação de mestrado integrado em Engenharia Civil

Creating and implementing a financial management process to an international company

The objectives of this thesis areto identify the best elements from Information Technology Infrastructure Library financial management for an international company. The elements need to be customized to fit existing elements and the thesis needs to provide implementation proposal. The new IT financial management needs to improve cost visibility and bring benefits to the company. In order to find the best elements for IT financial management, there needs to be a research to discover the companys business needs. The ITIL library is used to find answers and solutions to the companys issues in IT financial management. Other IT frameworks can and will be used as well, if they are able to work with ITIL model. ITIL consists from budgeting, accounting and charging in IT financial management, which all needs to be investigated. In addition more ITIL elements such as contract management and supplier management can be used, in order to make IT financial management work better.

Innate immunity to Paracoccidioides brasiliensis infection

Innate immunity is based in pre-existing elements of the immune system that directly interact with all types of microbes leading to their destruction or growth inhibition. Several elements of this early defense mechanism act in concert to control initial pathogen growth and have profound effect on the adaptative immune response that further develops. Although most studies in paracoccidioidomycosis have been dedicated to understand cellular and humoral immune responses, innate immunity remains poorly defined. Hence, the main purpose of this review is to present and discuss some mechanisms of innate immunity developed by resistant and susceptible mice to Paracoccidioides brasiliensis infection, trying to understand how this initial host-pathogen interface interferes with the protective or deleterious adaptative immune response that will dictate disease outcome. An analysis of some mechanisms and mediators of innate immunity such as the activation of complement proteins, the microbicidal activity of natural killer cells and phagocytes, the production of inflammatory eicosanoids, cytokines, and chemokines among others, is presented trying to show the important role played by innate immunity in the host response to P. brasiliensis infection.

Análise das disfunções da organização burocrática e suas implicações para a Qualidade de Vida no Trabalho (QVT): o caso de uma unidade de segurança pública, em Mato Grosso do Sul, Brasil

O objetivo geral deste estudo consistiu em identificar as dimensões da burocracia e relacioná-las aos elementos de disfunção burocrática existentes em uma unidade da administração pública estadual, no âmbito da Criminalística, que influenciam a Qualidade de Vida no Trabalho (QVT), considerando as abordagens humanista e restritiva, no contexto da Coordenadoria Geral de Perícias (CGP), a partir da percepção dos servidores lotados nesta unidade da Segurança Pública. Utilizou-se a pesquisa descritiva por meio de uma abordagem qualitativa de estudo de caso, com amostra constituída por peritos criminais do Instituto de Criminalística "Hercílio Macellaro" (ICHM), lotados na Capital do Estado, Campo Grande - MS. O método de coleta de dados adotado para a constatação das disfunções burocráticas foi um questionário com assertivas fechadas de alternativas de múltipla escolha, cujo modelo de resposta compõe-se por quatro níveis de gradação (sempre, muitas vezes, poucas vezes, nunca), elaborado a partir do modelo de Maia e Pinto (2007). Em outro momento, foi aplicado o questionário apresentando questões que abordavam os elementos da QVT propostos por Werther e Davis (1983), adaptado para o presente estudo. Para este questionário, as questões foram apresentadas em escala polarizada de satisfação do tipo Likert, composta por cinco alternativas (discordo totalmente, discordo parcialmente, não concordo nem discordo, concordo parcialmente e concordo totalmente), caracterizando a opinião do participante. A interpretação dos dados permitiu analisar a existência de quatro elementos de disfunção burocrática: internalização das regras, excesso de formalismo, rotinas e registros, resistência às mudanças e exibição de sinais de autoridade. De uma lado, a abordagem humanista foi possível analisar que os respondentes da pesquisa evidenciam ruídos na comunicação, tanto vertical quanto horizontal, o que indica a necessidade de mais transparência e clareza possível dentro e entre as equipes nos departamentos e destes com os superiores hierárquicos, a fim de proporcionar maior entendimento entre todos os envolvidos e a eliminação de conflitos que possam ocorrer através de informações distorcidas. Por outro lado, a análise da abordagem restritiva sobre a QVT neste estudo permitiu observar a predominância da racionalidade instrumental no contexto organizacional do ICHM, uma vez que está voltada somente para atender a seus processos organizacionais fundamentados no binômio técnica versus produção. Pode-se, assim, considerar que o ICHM está fortemente ligado ao modelo de organização burocrática, exteriorizado por quatro níveis de disfunções burocráticas. Além disso, como pretexto pela busca da eficiência, eficácia e efetividade, a práxis organizacional do ICHM parece convergir para dois modelos de produção: fordista e taylorista, as quais reforçam a corrente restritiva da QVT, que parece confirmar a manutenção da coisificação do sujeito em relação ao objeto, isto é, quando se pensava que o ser orgânico pudesse desfrutar do desenvolvimento tecnológico alcançado em várias ciências, paradoxalmente, o que tem sido visto é o trabalho como um fim em si mesmo.

Análise da confiabilidade do ensaio de identificação de ligas através de espectrometria por fluorescência de raios x

In chemical industry, petrochemical and oil refinery may be found situations that working pressures and very high temperatures, and alloys that comprise such equipment must have specific characteristics such. As a way to ensure that the materials are as designed, companies have some specific techniques, and one of them is X-ray fluorescence spectrometry, which allows its application in devices small and lightweight, which ensures its portability in field use. This technique however, has some shortcomings such as the impossibility of detecting carbon and other elements of low atomic number which can generate false identifications of elements that are not in the league or non-detection of existing elements. Therefore, this study investigated the reliability of this method using the apparatus Niton XL3t 800 and may conclude that their results are reliable and can be used to assist in ensuring the operational integrity of the production units of these companies

Los planos del concurso para la ciudad de vacaciones Playa de San Juan en 1933

En 1933 se celebra el concurso de anteproyectos para la primera ciudad turística de España. Las bases de la convocatoria exigían una extensa documentación: planes, planos y perspectivas. El análisis de la propuesta vencedora —muy sensible a las preexistencias— pone de relieve la secuencia que liga la geografía con la ordenación urbana gracias al pensamiento y a las herramientas gráficas. Primero, se dibuja el territorio levantando acta del mismo recurriendo a los diagramas. Segundo, los datos y las vocaciones del suelo se transforman en una trama urbana zonificada en el espacio y programada en el tiempo. Y tercero, la fotografía del paisaje sugiere los enclaves panorámicos y algunas de las arquitecturas clave. En este hito de la planificación se dan cita las modernas técnicas gráficas y fotográficas que interactúan con el urbanismo moderno del zoning.

Technologies for Seduction: The “Espacio Doméstico” VideoArt Center in Blanca [EDOM]

Sustainability, understood in its beginnings as a common horizon for multiple practices and fields of study, has gradually given way to the development of increasingly sophisticated tools, with distinct dominant meanings established for each discipline. Within the field of material technologies for architectural production, sustainability seems to have found its most fertile ground in topics such as recycling, the use of "bio" materials, or energetic efficiency. However, to improve the understanding of the impact of technology on our ways of living, it appears increasingly necessary to move from the deterministic logic of sustainability into the relational domain of ecology, where the use and deployment of technologies can be observed through the multiplicity of its effects and the diversity of actors involved. In this paper we will address the case of the rehabilitation of several traditional houses located in the Murcian town of Blanca to host the “Espacio Doméstico” VideoArt Center (EDOM). In this action the selection and implementation of technologies have been aimed at impacting on diverse aspects including local communities, digital manufacturing, recycling, and policies regarding the rehabilitation of heritage buildings. While the initial approach was to address housing recovery as a heterogeneous accumulation of stories, technologies or material deployments of the domestic, our intervention strategies ascribed to the different technologies the role of mediating with existing elements through the incorporation of the very different visions of sustainability. Thus, we displayed artifacts produced by digitally manufactured methacrylate assembled on IKEA structures, fluorescent power lines supported by insulators on the wall, fluorescent tattoos on walls and ceilings that guide and extend the configuration of existing flooring, esparto furniture and fabrics produced by the esparto women workers’ and village women’s associations, re-appropriations of old furniture through the implementation of new media technologies, etc. If we can see seduction as the process of converting affinities and disagreements into affirmative communication, then the EDOM proposal can be seen as an active seduction process between technologies and users who approach this kind of cultural artifacts. Through these permanently active processes, art technologies will refer the viewer to complex sensory experiences, where a combination of parody, memory and sound pushes the user to the limit of mere comprehension of works of art. This more relational approach to the issue of heritage rehabilitation, technology or art institutions is offered as an area of controversy and debate on the scope of political ecology and its potential impact on the architect’s professional practice.

Matrix elements of U(2n) generators in a multishell spin-orbit basis. II. The two-shell nonzero shift ACCs and U(2n) generator MEs

This is the second in a series of articles whose ultimate goal is the evaluation of the matrix elements (MEs) of the U(2n) generators in a multishell spin-orbit basis. This extends the existing unitary group approach to spin-dependent configuration interaction (CI) and many-body perturbation theory calculations on molecules to systems where there is a natural partitioning of the electronic orbital space. As a necessary preliminary to obtaining the U(2n) generator MEs in a multishell spin-orbit basis, we must obtain a complete set of adjoint coupling coefficients for the two-shell composite Gelfand-Paldus basis. The zero-shift coefficients were obtained in the first article of the series. in this article, we evaluate the nonzero shift adjoint coupling coefficients for the two-shell composite Gelfand-Paldus basis. We then demonstrate that the one-shell versions of these coefficients may be obtained by taking the Gelfand-Tsetlin limit of the two-shell formulas. These coefficients,together with the zero-shift types, then enable us to write down formulas for the U(2n) generator matrix elements in a two-shell spin-orbit basis. Ultimately, the results of the series may be used to determine the many-electron density matrices for a partitioned system. (C) 1998 John Wiley & Sons, Inc.

Embedded Through-Section shear strengthening technique using steel and CFRP bars in RC beams of different percentage of existing stirrups

The Embedded Through-Section (ETS) technique is a promising technique for the shear strengthening of existing (RC) elements. According to this technique, holes are drilled through the beam section, and bars of steel or FRP material are introduced into these holes and bonded to the concrete with adhesive materials. An experimental program was carried out with RC T-cross section beams strengthened in shear using the ETS steel bars and ETS CFRP rods. The research is focused on the evaluation of the ETS efficiency on beams with different percentage of existing internal transverse reinforcement (ρsw=0.0%, ρsw=0.1% and ρsw=0.17%). The effectiveness of different ETS strengthening configurations was also investigated. The good bond between the strengthening ETS bars and the surrounding concrete allowed the yield initiation of the ETS steel bars and the attainment of high tensile strains in the ETS CFPR rods, leading to significant increase of shear capacity, whose level was strongly influenced by the inclination of the ETS bars and the percentage of internal transverse reinforcement.

MAR elements as tools to increase protein production by CHO cells

One of the major hurdles of isolating stable, inducible or constitutive high-level producer cell lines is the time-consuming selection, analysis and characterization of the numerous clones required to identify one with the desired characteristics. Various boundary elements, matrix attachment regions, and locus control regions were screened for for their ability to augment the expression of heterologous genes in CHO and other cells. The 5'-matrix-attachment region (MAR) of the chicken lysozyme gene was found to significantly increase stable gene expression, in culture dishes and in bioreactors. These MAR elements can be easily combined with various existing expression systems, as they can be added in trans (i.e. on a separate plasmid) in co-transfections with previously constructed expression vectors. Using cell population analysis, we found that the use of the MAR increases the proportion of high-producing CHO cell clones, thus reducing the number of cell lines that need to be screened while increasing maximal productivity. Random cDNA cloning and sequencing indicated that over 12% of the ESTs correspond to the transgene. Thus, productivity is no longer limited by transcriptional events in such MAR-containing cell lines. The identification of small and more convenient active MAR portions will also be summarized. Finally, we will show examples of how MAR elements can be combined with short term expression to increase the simultaneous synthesis of many proteins in parallel by CHO cells. Overall, we conclude that the MAR sequence is a versatile tool to increase protein expression in short and long term production processes.

Numerical evaluation of the modulus of longitudinal elasticity in structural round timber elements of the Eucalyptus genus

Currently, the standards that deal with the determination of the properties of rigidity and strength for structural round timber elements do not take in consideration in their calculations and mathematical models the influence of the existing irregularities in the geometry of these elements. This study has as objective to determine the effective value of the modulus of longitudinal elasticity for structural round timber pieces of the Eucalyptus citriodora genus by a technique of optimization allied to the Inverse Analysis Method, to the Finite Element Method and the Least Square Method.

Characterization of fiber and vessel elements in pulp suspension images

The thesis is related to the topic of image-based characterization of fibers in pulp suspension during the papermaking process. Papermaking industry is focusing on process control optimization and automatization, which makes it possible to manufacture highquality products in a resource-efficient way. Being a part of the process control, pulp suspension analysis allows to predict and modify properties of the end product. This work is a part of the tree species identification task and focuses on analysis of fiber parameters in the pulp suspension at the wet stage of paper production. The existing machine vision methods for pulp characterization were investigated, and a method exploiting direction sensitive filtering, non-maximum suppression, hysteresis thresholding, tensor voting, and curve extraction from tensor maps was developed. Application of the method to the microscopic grayscale pulp images made it possible to detect curves corresponding to fibers in the pulp image and to compute their morphological characteristics. Performance of the method was evaluated based on the manually produced ground truth data. An accuracy of fiber characteristics estimation, including length, width, and curvature, for the acacia pulp images was found to be 84, 85, and 60% correspondingly.