Desenvolvimento de um painel sanduíche com carga de particulado oriundo de resíduo lignocelulósico para aplicação em produtos na área de equipamentos de proteção

This work aims to study and investigate the use of a hybrid composite polymer formed with blanket aramid (Kevlar 29) fiber blanket flax fiber and particulate dry endocarp of coconut (Cocos nucifera Linn), using as matrix an epoxy resin based thermoset for use in areas of protective equipment. Besides such material is used an aluminum plate, joined to the composite by means of glue based on epoxy and araldite commercial. The manufacturing process adopted was manual lamination (Hand Lay Up) to manufacture the hybrid composite. After the composite is prepared, an aluminum plate is subjected to pressure and glued to cure the adhesive. Layers of veil will also be used to separate the particulate from the linen blanket layer without disturbing the alignment of the fibers of the blankets. To characterize the mechanical and physical behavior was manufactured a plate of 800 x 600 mm of the hybrid composite, which were removed specimens for tests of water absorption to saturation; density; impact test (Charpy) and two test specimens for ballistic testing 220 mm x 200 mm to make a comparative study between the dry state and saturated water absorption and thus see the ballistic performance of these two conditions. The test was applied to make a comparative study of fracture in these two conditions, caused by penetrating ballistic missile (38 and 380). To test the impact (Charpy) will analyze the absorbed energy, fracture appearance and lateral contraction, also in dry condition and saturation of absorbed water, thereby analyzing situations where the impact load is relevant, such as bumps and shocks produced by stone, metal or wooden bars among others. The proposed configuration, along with the tests, has the purpose, application in the fields of equipment against ballistic impact, such as helmets; bullet proof vests; shields; protective packaging and other items to be identified in this research.

Propriedades térnicas de géis e xerogéis híbridos de sílica/orgânico à base de GPTS-TEOS com diferentes concentrações de GPTS

In the present work the thermal characteristics of gels and xerogels of Silica/organic hybrids derived from different concentrations of GPTS-TEOS were investigated by thermal analysis (TG, DTA, and DSC). The preparation of gels of the Silica/organic hybrid matrix was held through the sol-gel process, consisting by the hydrolysis of alkoxides GPTS and TEOS in proportion (1:1) and (1:2) that was promoted in acidic conditions under reflux and stirring at 80oC/2h, producing the matrix in the colloidal state (sol). Gels were prepared by addition of NH4OH to the sol, promoting gelation of sol in sealed plastics containers. Part of the gels samples was analyzed by TG, DTS and DSC techniques in order to characterize water loss and degradation of the polymeric “epoxy” groups present in the structure of the silica derived from the GPTS alkoxide. Another set of samples was dried at 80oC/48h to obtain xerogels (dried gels) and analyzed by the same techniques. We obtained the characteristics temperatures of the matrix by the techniques DTA, DSC and TG, under measurements of thermal analysis until 800oC and 600oC in case of DSC. By thermal analysis (TG, DTA, and DSC) the main endothermic events (loss of water, melting, pyrolysis) and exothermic events (burning of the polymer) of the GPTS-TEOS matrix were determined

Metodologia híbrida de desenvolvimento centrado no utilizador: aplicada ao software educativo

No panorama atual do desenvolvimento de software educativo é importante que os processos de desenvolvimento sejam adequados e compatíveis com o contexto em que serão utilizados este tipo de recursos. Desta forma, é importante melhorar continuamente os processos de desenvolvimento bem como se proceder à avaliação de forma a garantir a sua qualidade e viabilidade económica. Este estudo propõe uma Metodologia Híbrida de Desenvolvimento Centrado no Utilizador (MHDCU) aplicada ao software educativo. Trata-se de um processo de desenvolvimento simples, iterativo e incremental que tem como “alicerces” princípios do Design Centrado no Utilizador, especificados na International Organization for Standardization - ISO 13407. Na sua base encontra-se a estrutura disciplinada de processos de desenvolvimento, bem como práticas e valores dos métodos ágeis de desenvolvimento de software. O processo é constituído por 4 fases principais: planeamento (guião didático), design (storyboard), implementação e manutenção/operação. A prototipagem e a avaliação são realizadas de modo transversal a todo o processo. A metodologia foi implementada numa Pequena e Média Empresa de desenvolvimento de recursos educacionais, com o objetivo de desenvolver recursos educacionais com qualidade reconhecida e simultaneamente viáveis do ponto de vista económico. O primeiro recurso que teve por base a utilização desta metodologia foi o Courseware Sere – “O Ser Humano e os Recursos Naturais”. O trabalho seguiu uma metodologia de investigação & desenvolvimento, de natureza mista, em que se pretendeu descrever e analisar/avaliar uma metodologia de desenvolvimento de software educativo, i.e., o processo, bem como o produto final. O estudo é fundamentalmente descritivo e exploratório. A metodologia de desenvolvimento do software (primeira questão de investigação) foi proposta, essencialmente, com base na revisão integrativa da literatura da especialidade e com base nos resultados que emergiram das Fases 2 e 3. Do ponto de vista exploratório, foi avaliado, por um lado, o potencial técnico e didático da 1ª versão do software inserido no Courseware Sere (segunda questão de investigação), e, por outro lado, analisar os pontos fortes e as fragilidades da metodologia utilizada para o seu desenvolvimento (terceira questão de investigação). Como técnicas de recolha de dados recorreu-se a dois inquéritos por questionário e à observação direta participante (mediada pela plataforma moodle). Quanto às técnicas de análise de dados optou-se pela análise estatística descritiva e pela análise de conteúdo. Os resultados indicam que o recurso desenvolvido possui qualidade técnica e didática. Relativamente a análise da Metodologia Híbrida de desenvolvimento Centrado no Utilizador foram propostas algumas melhorias relacionadas com o envolvimento do utilizador e introdução de novos métodos. Apesar de identificadas algumas limitações, este projeto permitiu que a empresa melhorasse significativamente os processos de desenvolvimento de recursos (mesmo os que não são informatizados), bem como permitiu o aumento do seu portefólio com o desenvolvimento do Courseware Sere.

Gestão híbrida em cooperativa de crédito: uma análise a partir do interesse, participação, satisfação e expectativa dos cooperados da COOPERUFPA

The globalization of markets has confirmed for the processes of change in organizations both in structure and in management. This dynamic was also observed in credit unions because they are financial institutions and are under the rules of the Brazil´s Financial System. Given the context of organizational changes in the financial capital has played the traditional management reform is urgent. In organizations credit unions, given its dual purpose, because in the same organizational environment and capitalism coexist cooperative whose logics are antagonistic, but can live through the balance between instrumental rationality and substantive rationality in credit unions. Based on this concept a new form of management should be thought to be able to accommodate the demand of cooperative, community, government and the market. Hybridization has been observed in management practices` COOPERUFPA into dimensions financial, social and solidarity participation with a trend in paradigmatic form of hybrid management, in that it directly or indirectly affect the management decisions in the credit union. The hybrid management is a trend that has been setting the basis for societal transformation, so that credit unions promote actions of welfare oriented cooperative members and the community around the same time that attend the dynamics of market globalization. These actions, in the context of hybrid management should be implemented by COOPERUFPA from the sociability of the remains and the wide diffusion of solidarity culture between cooperative partnership as a way to recover their participation in trade relations, financial and the social collective developement. For the members of COOPERUFPA financial interest is evidenced in greater relevance for the social interest given its dominant relationship as "mere customer" of the credit union, however, the proactive participation of the life of the cooperative credit union is one of its expectative among of participation of to share power in decisions by general meetings. This passivity`s cooperator of the COOPERUFPA in defending the ideals overshadowed the spread of cooperative principles and values of cooperation among them. Thus his conception for COOPERUFPA in the financial dimension, social and solidarity democracy, performed transversely. The COOPERUFPA for not developing an education policy for the cooperation among its members, contributed to a process of collective alienation of cooperative ideals, since the cooperative do not understand the reality that surrounds them as members of an organization whose mission is to social and financial sustainability of its members

Efeito de argilas organofílicas na estrutura e propriedades de nanocompósitos de poli(metacrilato de metila)

Nacomposites of polymers and lamellar clayminerals, has generated high scientific and technological interest, for having mechanical properties and gas barriers differentiated of polymers and conventional composites. In this work, it was developed nanocomposites by single screw extruder and injection, utilizing commercial raw material, with the goal to investigate the quality of new developed materials. It was evaluated the influence of the content and the kind of clay in the structure and in the nanocomposites properties. It was used regular and elastomeric poly (methyl methacrylate) (Acrigel LEP 100 and Acrigel ECP800) and six montmorillonites (Cloisite 10A, 11B, 15A, 20A, 25A e 30B) at the concentration of 1% e 3% in weight. The nanocomposites were characterized by X-ray diffraction (XRD), thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), colorimetric, optical transparency, flexural and tensile tests, Rockwell hardness and esclerometry. It was founded that is possible to obtain intercalated and exfoliated nanocomposites PMMA/MMT, and the top results was obtained in the materials with 1%in clay weight organophilizated with 2M2HT (Cloisite 15A and 20A) presented intercalate and hybrid morphology (exfoliated and flocullated). The ones that was produced with organophilizated clay with 2MHTL8 (Cloisite 30B) had excellent visual quality, but the majority presented hybrid morphology. In the materials processed with organophilizated clay with MT2ETOH (Cloisite 30B), there were color change and loss of transparency. It occurs improvement in a few mechanical properties, mainly in the materials produced with PMMA elastomeric (Acrigel ECP800), being more significant, the increase in the resistance to stripping in those nanocomposites

Uma abordagem híbrida para o problema de seleção de fornecedores em cadeia de suprimentos

This work presents a hybrid approach for the supplier selection problem in Supply Chain Management. We joined decision-making philosophy by researchers from business school and researchers from engineering in order to deal with the problem more extensively. We utilized traditional multicriteria decision-making methods, like AHP and TOPSIS, in order to evaluate alternatives according decision maker s preferences. The both techiniques were modeled by using definitions from the Fuzzy Sets Theory to deal with imprecise data. Additionally, we proposed a multiobjetive GRASP algorithm to perform an order allocation procedure between all pre-selected alternatives. These alternatives must to be pre-qualified on the basis of the AHP and TOPSIS methods before entering the LCR. Our allocation procedure has presented low CPU times for five pseudorandom instances, containing up to 1000 alternatives, as well as good values for all considered objectives. This way, we consider the proposed model as appropriate to solve the supplier selection problem in the SCM context. It can be used to help decision makers in reducing lead times, cost and risks in their supply chain. The proposed model can also improve firm s efficiency in relation to business strategies, according decision makers, even when a large number of alternatives must be considered, differently from classical models in purchasing literature

Estudo da viabilização do uso da mistura híbrida ferrocarbonila / ferrita de NI0,5Zn0,5Fe2o4 como material absorvedor de radiação eletromagnética

Were synthesized ferrites of NiZn on systems Ni0,5Zn0,5Fe2O4, the precursors citrate method. The decomposition of the precursors was studied by thermogravimetric analysis and spectroscopy in the infrared region, the temperature of 350°C/3h. The evolution of the phases formed after calcinations at 350ºC/3h, 600, 1000 and 1100ºC/2h was accompanied by X-ray diffraction using the Rietveld refinement method for better identification os structures formed. Was observed for samples calcined at different temperatures increased crystallinity with increasing calcination temperature, being observed for the samples calcined at 900 and 1100 º C/2h was the precipitation of a secondary phase, the phase hematite. The ferrocarbonila of industrial origin was analyzed by X-ray diffraction and Rietveld for the identification of its structure. The carbonyl iron was added NiZn ferrite calcined at 350ºC/3h, 600, 900, 1000 and 1100ºC/2h to the formation of hybrid mixtures. They were then analyzed by Xray diffraction and Rietveld. The NiZn ferrite and ferrocarbonila as well as the hybrid mixtures were subjected to analysis of scanning electron microscopy, magnetic measurements and reflectivity. The magnetic measurements indicated that the ferrite, the ferrocarbonila, as well as hybrid mixtures showed characteristics of soft magnetic material. The addition of ferrocarbonila in all compositions showed an increase in the results of magnetic measurements and reflectivity. Best result was observed in the increase of the magnetization for the hybrid mixture of Ferrocarbonila / ferrite of NiZn calcined at 600ºC/2h. The mixture Ferrocarbonila / ferrite calcined 1000°C/2h presented better absorption of electromagnetic radiation in the microwave

Estratégia de planejamento de redes de acesso de alta capilaridade baseada em tecnologia DSL: uma abordagem híbrida empírica e probabilística

A tecnologia DSL- Digital Subscriber Line permitem um acesso universal de banda larga, com redução de custo e tempo de implantação necessários, quando comparadas a outras redes de acesso. DSL pode ser considerada uma rede de banda larga de grande capilaridade, uma vez que utiliza uma combinação de infra-estrutura de telefonia existente e a tecnologia de transmissão. Não obstante, a rede DSL precisa ser amplamente compreendida, de maneira que suas principais vantagens não sejam suplantadas pela ineficiência geral do sistema. Esta tese apresenta uma abordagem baseada em estratégias que possibilitem o planejamento de redes de comunicação que a priori não foram implementadas para suportar fluxos Triple Play (pré-requisito obrigatório diante do perfil atual de usuários da Internet). Será mostrado que, a partir do uso de medidas reais e análises probabilísticas, é possível elaborar o planejamento de redes de comunicação, considerando os parâmetros físicos e lógicos, tais como: o caminho de transmissão, a influência do ruído na comunicação, os protocolos utilizados e tráfego de Triple Play (voz, vídeo e dados).

Uma abordagem híbrida e semiautomática para estimativa de regiões cobertas por nuvens e sombras em imagens de satélite: análise e avaliação

Os principais objetivos deste trabalho são propor um algoritmo eficiente e o mais automático possível para estimar o que está coberto por regiões de nuvens e sombras em imagens de satélite; e um índice de confiabilidade, que seja aplicado previamente à imagem, visando medir a viabilidade da estimação das regiões cobertas pelos componentes atmosféricos usando tal algoritmo. A motivação vem dos problemas causados por esses elementos, entre eles: dificultam a identificação de objetos de imagem, prejudicam o monitoramento urbano e ambiental, e desfavorecem etapas cruciais do processamento digital de imagens para extrair informações ao usuário, como segmentação e classificação. Através de uma abordagem híbrida, é proposto um método para decompor regiões usando um filtro passa-baixas não-linear de mediana, a fim de mapear as regiões de estrutura (homogêneas), como vegetação, e de textura (heterogêneas), como áreas urbanas, na imagem. Nessas áreas, foram aplicados os métodos de restauração Inpainting por suavização baseado em Transformada Cosseno Discreta (DCT), e Síntese de Textura baseada em modelos, respectivamente. É importante salientar que as técnicas foram modificadas para serem capazes de trabalhar com imagens de características peculiares que são obtidas por meio de sensores de satélite, como por exemplo, as grandes dimensões e a alta variação espectral. Já o índice de confiabilidade, tem como objetivo analisar a imagem que contém as interferências atmosféricas e daí estimar o quão confiável será a redefinição com base no percentual de cobertura de nuvens sobre as regiões de textura e estrutura. Tal índice é composto pela combinação do resultado de algoritmos supervisionados e não-supervisionados envolvendo 3 métricas: Exatidão Global Média (EGM), Medida De Similaridade Estrutural (SSIM) e Confiança Média Dos Pixels (CM). Finalmente, verificou-se a eficácia destas metodologias através de uma avaliação quantitativa (proporcionada pelo índice) e qualitativa (pelas imagens resultantes do processamento), mostrando ser possível a aplicação das técnicas para solucionar os problemas que motivaram a realização deste trabalho.

Técnica híbrida de plasma para a deposição de filmes de alumina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Gestão híbrida em cooperativa de crédito: uma análise a partir do interesse, participação, satisfação e expectativa dos cooperados da COOPERUFPA

The globalization of markets has confirmed for the processes of change in organizations both in structure and in management. This dynamic was also observed in credit unions because they are financial institutions and are under the rules of the Brazil´s Financial System. Given the context of organizational changes in the financial capital has played the traditional management reform is urgent. In organizations credit unions, given its dual purpose, because in the same organizational environment and capitalism coexist cooperative whose logics are antagonistic, but can live through the balance between instrumental rationality and substantive rationality in credit unions. Based on this concept a new form of management should be thought to be able to accommodate the demand of cooperative, community, government and the market. Hybridization has been observed in management practices` COOPERUFPA into dimensions financial, social and solidarity participation with a trend in paradigmatic form of hybrid management, in that it directly or indirectly affect the management decisions in the credit union. The hybrid management is a trend that has been setting the basis for societal transformation, so that credit unions promote actions of welfare oriented cooperative members and the community around the same time that attend the dynamics of market globalization. These actions, in the context of hybrid management should be implemented by COOPERUFPA from the sociability of the remains and the wide diffusion of solidarity culture between cooperative partnership as a way to recover their participation in trade relations, financial and the social collective developement. For the members of COOPERUFPA financial interest is evidenced in greater relevance for the social interest given its dominant relationship as "mere customer" of the credit union, however, the proactive participation of the life of the cooperative credit union is one of its expectative among of participation of to share power in decisions by general meetings. This passivity`s cooperator of the COOPERUFPA in defending the ideals overshadowed the spread of cooperative principles and values of cooperation among them. Thus his conception for COOPERUFPA in the financial dimension, social and solidarity democracy, performed transversely. The COOPERUFPA for not developing an education policy for the cooperation among its members, contributed to a process of collective alienation of cooperative ideals, since the cooperative do not understand the reality that surrounds them as members of an organization whose mission is to social and financial sustainability of its members

Arquitetura híbrida com DSP e FPGA para implementação de controladores de filtros ativos de potência

The presence of non-linear loads at a point in the distribution system may deform voltage waveform due to the consumption of non-sinusoidal currents. The use of active power filters allows significant reduction of the harmonic content in the supply current. However, the processing of digital control structures for these filters may require high performance hardware, particularly for reference currents calculation. This work describes the development of hardware structures with high processing capability for application in active power filters. In this sense, it considers an architecture that allows parallel processing using programmable logic devices. The developed structure uses a hybrid model using a DSP and an FPGA. The DSP is used for the acquisition of current and voltage signals, calculation of fundamental current related controllers and PWM generation. The FPGA is used for intensive signal processing, such as the harmonic compensators. In this way, from the experimental analysis, significant reductions of the processing time are achieved when compared to traditional approaches using only DSP. The experimental results validate the designed structure and these results are compared with other ones from architectures reported in the literature.

Gestão híbrida em cooperativa de crédito: uma análise a partir do interesse, participação, satisfação e expectativa dos cooperados da COOPERUFPA

The globalization of markets has confirmed for the processes of change in organizations both in structure and in management. This dynamic was also observed in credit unions because they are financial institutions and are under the rules of the Brazil´s Financial System. Given the context of organizational changes in the financial capital has played the traditional management reform is urgent. In organizations credit unions, given its dual purpose, because in the same organizational environment and capitalism coexist cooperative whose logics are antagonistic, but can live through the balance between instrumental rationality and substantive rationality in credit unions. Based on this concept a new form of management should be thought to be able to accommodate the demand of cooperative, community, government and the market. Hybridization has been observed in management practices` COOPERUFPA into dimensions financial, social and solidarity participation with a trend in paradigmatic form of hybrid management, in that it directly or indirectly affect the management decisions in the credit union. The hybrid management is a trend that has been setting the basis for societal transformation, so that credit unions promote actions of welfare oriented cooperative members and the community around the same time that attend the dynamics of market globalization. These actions, in the context of hybrid management should be implemented by COOPERUFPA from the sociability of the remains and the wide diffusion of solidarity culture between cooperative partnership as a way to recover their participation in trade relations, financial and the social collective developement. For the members of COOPERUFPA financial interest is evidenced in greater relevance for the social interest given its dominant relationship as "mere customer" of the credit union, however, the proactive participation of the life of the cooperative credit union is one of its expectative among of participation of to share power in decisions by general meetings. This passivity`s cooperator of the COOPERUFPA in defending the ideals overshadowed the spread of cooperative principles and values of cooperation among them. Thus his conception for COOPERUFPA in the financial dimension, social and solidarity democracy, performed transversely. The COOPERUFPA for not developing an education policy for the cooperation among its members, contributed to a process of collective alienation of cooperative ideals, since the cooperative do not understand the reality that surrounds them as members of an organization whose mission is to social and financial sustainability of its members

Efeito de argilas organofílicas na estrutura e propriedades de nanocompósitos de poli(metacrilato de metila)

Nacomposites of polymers and lamellar clayminerals, has generated high scientific and technological interest, for having mechanical properties and gas barriers differentiated of polymers and conventional composites. In this work, it was developed nanocomposites by single screw extruder and injection, utilizing commercial raw material, with the goal to investigate the quality of new developed materials. It was evaluated the influence of the content and the kind of clay in the structure and in the nanocomposites properties. It was used regular and elastomeric poly (methyl methacrylate) (Acrigel LEP 100 and Acrigel ECP800) and six montmorillonites (Cloisite 10A, 11B, 15A, 20A, 25A e 30B) at the concentration of 1% e 3% in weight. The nanocomposites were characterized by X-ray diffraction (XRD), thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), colorimetric, optical transparency, flexural and tensile tests, Rockwell hardness and esclerometry. It was founded that is possible to obtain intercalated and exfoliated nanocomposites PMMA/MMT, and the top results was obtained in the materials with 1%in clay weight organophilizated with 2M2HT (Cloisite 15A and 20A) presented intercalate and hybrid morphology (exfoliated and flocullated). The ones that was produced with organophilizated clay with 2MHTL8 (Cloisite 30B) had excellent visual quality, but the majority presented hybrid morphology. In the materials processed with organophilizated clay with MT2ETOH (Cloisite 30B), there were color change and loss of transparency. It occurs improvement in a few mechanical properties, mainly in the materials produced with PMMA elastomeric (Acrigel ECP800), being more significant, the increase in the resistance to stripping in those nanocomposites

Executivo, Congresso e parlamentares na estrutura de delegação legislativa do Brasil republicano

Analisa a evolução da estrutura de delegação legislativa no Brasil republicano,identificando a centralidade do Executivo no processo decisório no pós-30 e evidenciando, ao mesmo tempo, o aumento da capacidade de controle da delegação por parte do Poder Legislativo a partir de 1988. A análise orienta-se pela argumentação de Shugart e Carey sobre os fundamentos da delegação legislativa.