Effect of Chain Length of Alcohol on the Lipase-Catalyzed Esterification of Propionic Acid in Supercritical Carbon Dioxide

The esterification of propionic acid was investigated using three different alcohols, namely, isopropyl alcohol, isobutyl alcohol, and isoamyl alcohol. The variation of conversion with time for the synthesis of isoamyl propionate was investigated in the presence of five enzymes. Novozym 435 showed the highest activity, and this was used as the enzyme for investigating the various parameters that influence the esterification reaction. The Ping-Pong Bi-Bi model with inhibition by both acid and alcohol was used to model the experimental data and determine the kinetics of the esterification reaction.

Multifunctional SA-PProDOT binder for lithium ion batteries

An environmentally benign, highly conductive, and mechanically strong binder system can overcome the dilemma of low conductivity and insufficient mechanical stability of the electrodes to achieve high performance lithium ion batteries (LIBs) at a low cost and in a sustainable way. In this work, the naturally occurring binder sodium alginate (SA) is functionalized with 3,4-propylenedioxythiophene-2,5-dicarboxylic acid (ProDOT) via a one-step esterification reaction in a cyclohexane/dodecyl benzenesulfonic acid (DBSA)/water microemulsion system, resulting in a multifunctional polymer binder, that is, SA-PProDOT. With the synergetic effects of the functional groups (e.g., carboxyl, hydroxyl, and ester groups), the resultant SA-PProDOT polymer not only maintains the outstanding binding capabilities of sodium alginate but also enhances the mechanical integrity and lithium ion diffusion coefficient in the LiFePO4 (LFP) electrode during the operation of the batteries. Because of the conjugated network of the PProDOT and the lithium doping under the battery environment, the SA-PProDOT becomes conductive and matches the conductivity needed for LiFePO4 LIBs. Without the need of conductive additives such as carbon black, the resultant batteries have achieved the theoretical specific capacity of LiFePO4 cathode (ca. 170 mAh/g) at C/10 and ca. 120 mAh/g at 1C for more than 400 cycles.

On the reactivity of carboxyl groups of ribonuclease-A in anhydrous methanol

The esterification of Ribonuclease-A in methanol/0.1 M hydrochloric acid has been studied by measuring the decrease in the number of titratable groups of the protein and estimating the amount of methanol incorporated. Esterification of nearly five of the 11 free carboxyl groups of the protein resulted in almost complete inactivation of the enzyme. The initial products of esterification have been chromatographed on Amberlite columns, and five partially active methyl ester derivatives of Ribonuclease-A have been isolated. The dimethyl ester, the initial product of esterification with reduced catalytic activity, has the carboxyl groups of Glu-49 and Asp-53 modified. Even in the non-aqueous solvent, as in the native structure of the protein in aqueous solution, these carboxyl groups are the fast reacting ones. Subsquently, the esterification reaction appears to proceed preferentially at the C-terminal region of the molecule. Comparison of the reactivities of carboxyl groups of Ribonuclease-A in acidic methanol to that known in aqueous solutions (with carbodiimides) suggests that the structure of Ribonuclease-A in the non-aqueous solvent resembles, at least in part, the structure in aqueous environment.

Síntese de sebacato de dioctila empregando lipases

A crescente demanda por lubrificantes obtidos a partir de fontes renováveis vem incentivando a pesquisa por alternativas sustentáveis. O objetivo principal deste trabalho foi investigar a síntese de sebacato de dioctila a partir da reação de esterificação entre o ácido sebácico e o 1-octanol empregando biocatalisadores e catalisador químico convencional (ácido sulfúrico). Alguns parâmetros reacionais foram estudados: tipo de lipase comercial imobilizada (Novozym 435, Lipozyme RM IM e Lipozyme TL IM), temperatura, razão molar ácido/álcool, concentração de lipase, métodos de remoção da água do meio reacional. A reutilização da lipase Novozym 435 também foi avaliada. A conversão da reação foi determinada por cromatografia em fase gasosa. A lipase Novozym 435 apresentou os melhores resultados: 100% de conversão de ácido sebácico quando foi empregada razão molar ácido:álcool de 1:5 e 5% m/m de lipase, após 150 minutos de reação a 100C. O emprego de peneira molecular e vácuo não aumentou a conversão do ácido sebácico. O produto final foi caracterizado com relação à viscosidade, ao índice de viscosidade, ao ponto de fulgor, ao ponto de fluidez e ao índice de neutralização, e apresentou comportamento semelhante a um óleo naftênico

Avaliação de catalisadores à base de estanho visando à produção de biodiesel

Atualmente, existe um crescente interesse por fontes de energia renováveis e o desenvolvimento de novas tecnologias para a produção de biocombustíveis. O biodiesel é uma fonte alternativa de combustível bastante atrativa em relação ao diesel em decorrência de seus benefícios ambientais. A obtenção de biodiesel é geralmente realizada através de reações de transesterificação de óleos vegetais com álcool de cadeia curta. Entretanto, também se pode produzi-lo através da esterificação de ácidos graxos livres utilizando-se matérias-primas de baixa qualidade como rejeitos industriais, domésticos ou gorduras animais. O estudo de catalisadores que melhorem os resultados destas reações tem importante papel no desenvolvimento da produção de biodiesel. Normalmente, utilizam-se catalisadores básicos como o NaOH, nas reações de transesterificação. No entanto, o uso destes catalisadores causa impactos ambientais, além de promover a reação de saponificação quando a matéria-prima apresenta teores significativos de acidez, reduzindo o rendimento e dificultando a separação de fases. Este trabalho apresenta o estudo de catalisadores ácidos, à base de estanho, com ênfase especial no sulfato de estanho II, voltados para utilização na reação de esterificação de cargas contendo elevados teores em ácidos graxos. Avaliou-se a influência das variáveis: temperatura, concentração do catalisador, tipo de sistema reacional, quantidade de etanol, tipo de álcool, acidez, natureza dos ácidos graxos e temperatura de calcinação. Uma comparação entre os catalisadores, a questão da reutilização do catalisador e das mudanças proporcionadas pelo tratamento térmico ao qual foram submetidos também foram analisadas. Dentre os catalisadores estudados, os de sulfato de estanho mostraram maior atividade catalítica frente à reação estudada, os mais promissores sendo os calcinados até a temperatura de 500C. O principal motivo para os altos rendimentos encontrados foi associado ao comportamento pseudo-homogêneo do SnSO4, que se solubiliza, acidificando o meio reacional durante as reações de esterificação

Síntese de ésteres derivados do ácido oléico empregando lipases produzidas por Yarrowia lipolytica

Biodiesel é um biocombustível que consiste na mistura de ésteres monoalquílicos de ácidos graxos de cadeia longa. O processo usual de produção deste combustível é a transesterificação de óleos vegetais com álcoois de cadeia curta. Nesse processo, a matéria prima deve conter baixo conteúdo de ácido graxos livres ( ≤ 1%) e água (≤ 0,5%). Como alternativa ao processo de transesterificação, destaca-se o emprego de matérias-primas de baixo custo, com elevado teor de ácidos graxos livres, para a síntese de ésteres alquílicos através de reações de esterificação. As reações de produção do biodiesel podem ser catalisadas por via química (ácida e básica) ou enzimática. Na catálise enzimática, os biocatalisadores empregados são as lipases, que catalisam a hidrólise e síntese de ésteres e podem ser obtidas a partir de microrganismos, plantas ou tecido animal, sendo as de origem microbiana as mais utilizadas. O objetivo principal deste trabalho foi avaliar o potencial da lipase de Yarrowia lipolytica, uma levedura não convencional, na síntese de ésteres do ácido oleico visando à obtenção de ésteres alquílicos (biodiesel). Foram estudados os efeitos da temperatura (25, 30, 35, 40, 50 e 60oC), do teor enzimático (5, 10, 20, 30 e 40% v/v) e do tipo de álcool (metanol, etanol, n-propanol e n-butanol ) nas reações de esterificação do ácido oleico empregando o extrato enzimático líquido produzido por Yarrowia lipolytica. Os resultados obtidos mostraram que as reações conduzidas a 30oC e com 10% v/v do extrato enzimático apresentaram maior taxa inicial de reação. Também foi avaliada a utilização do extrato enzimático liofilizado (5% m/v) e do PES (produto enzimático sólido) (5% m/v) de Yarrowia lipolytica na reação de esterificação do ácido oleico com n-butanol a 30oC. O maior consumo de ácido oleico ocorreu na reação conduzida com o PES. O efeito da temperatura (25, 30, 35, 40 e 50oC) na síntese de oleato de butila foi, então, investigado nas reações empregando PES como biocatalisador e a maior conversão de ácido oleico foi verificada na temperatura de 40oC

Production and characterization of biodiesel from tung oil

The feasibility of biodiesel production from tung oil was investigated. The esterification reaction of the free fatty acids of tung oil was performed using Amberlyst-15. Optimal molar ratio of methanol to oil was determined to be 7.5:1, and Amberlyst-15 was 20.8wt% of oil by response surface methodology. Under these reaction conditions, the acid value of tung oil was reduced to 0.72mg KOH/g. In the range of the molar equivalents of methanol to oil under 5, the esterification was strongly affected by the amount of methanol but not the catalyst. When the molar ratio of methanol to oil was 4.1:1 and Amberlyst-15 was 29.8wt% of the oil, the acid value decreased to 0.85mg KOH/g. After the transesterification reaction of pretreated tung oil, the purity of tung biodiesel was 90.2wt%. The high viscosity of crude tung oil decreased to 9.8mm(2)/s at 40 degrees C. Because of the presence of eleostearic acid, which is a main component of tung oil, the oxidation stability as determined by the Rancimat method was very low, 0.5h, but the cold filter plugging point, -11 degrees C, was good. The distillation process did not improve the fatty acid methyl ester content and the viscosity.

Study on comblike polymer electrolyte

New comblike polymers(CP) have been synthesized by reacting monomethyl ether of polyethylene glycol(PEGME) with poly(methyl vinyl ether-alt-maleic anhydride)(MA) and endcapping the residual carboxylic acid with methanol. Butanone was selected as a solvent for the esterification reaction in order to obtain a completely soluble product. They were characterized by IR, C-13 NMR and elemental analysis.

Stability of 5-aminolevulinic acid in novel non-aqueous gel and patch-type systems intended for topical application.

Aminolevulinic acid (ALA) stability within topical formulations intended for photodynamic therapy (PDT) is poor due to dimerisation to pyrazine-2,5-dipropionic acid (PY). Most strategies to improve stability use low pH vehicles, which can cause cutaneous irritancy. To overcome this problem, a novel approach is investigated that uses a non-aqueous vehicle to retard proton-induced charge separation across the 4-carbonyl group on ALA and lessen nucleophilic attack that leads to condensation dimerisation. Bioadhesive anhydrous vehicles based on methylvinylether-maleic anhydride copolymer patches and poly(ethyleneglycol) or glycerol thickened poly(acrylic acid) gels were formulated. ALA stability fell below pharmaceutically acceptable levels after 6 months, with bioadhesive patches stored at 5°C demonstrating the best stability by maintaining 86.2% of their original loading. Glycerol-based gels maintained 40.2% in similar conditions. However, ALA loss did not correspond to expected increases in PY, indicating the presence of another degradative process that prevented dimerisation. Nuclear magnetic resonance (NMR) analysis was inconclusive in respect of the mechanism observed in the patch system, but showed clearly that an esterification reaction involving ALA and both glycerol and poly(ethyleneglycol) was occurring. This was especially marked in the glycerol gels, where only 2.21% of the total expected PY was detected after 204 days at 5°C. Non-specific esterase hydrolysis demonstrated that ALA was recoverable from the gel systems, further supporting esterified binding within the gel matrices. It is conceivable that skin esterases could duplicate this finding upon topical application of the gel and convert these derivatives back to ALA in situ, provided skin penetration is not affected adversely.

Influence of plasticizer type and storage conditions on properties of poly(methyl vinyl ether-co-maleic anhydride) bioadhesive films

Poly(methyl vinyl ether-co-maleic anhydride) formed films from aqueous formulations with characteristics that are ideal as a basis for producing a drug-containing bioadhesive delivery system when plasticized with a monohydroxyl functionalized plasticizer. Hence, films containing a novel plasticizer, tripropylene glycol methyl ether (TPME), maintained their adhesive strength and tensile properties when packaged in aluminized foil for extended periods of time. Films plasticized with commonly used polyhydric alcohols, such as the glycerol in this study, underwent an esterification reaction that led to polymer crosslinking, as shown in NMR studies. These revealed the presence of peaks in the ester/carbonyl region, suggesting that glyceride residue formation had been initiated. Given the polyfunctional nature of glycerol, progressive esterification would result in a polyester network and an accompanying profound alteration in the physical characteristics. Indeed, films became brittle over time with a loss of both the aqueous solubility and bioadhesion to porcine skin. In addition, a swelling index was measurable after 7 days, a property not seen with those films containing TPME. This change in bioadhesive strength and pliability was independent of the packaging conditions, rendering the films that contain glycerol as unsuitable as a basis for topical bioadhesive delivery of drug substances. Consequently, films containing TPME have potential as an alternative formulation strategy.

Investigation of swelling and network parameters of poly (ethylene glycol)-crosslinked poly (methyl vinyl ether-co-maleic acid) hydrogels

he influence of poly(ethylene glycol) (PEG) plasticiser content and molecular weight on the physicochemical properties of films cast from aqueous blends of poly(methyl vinyl ether-co-maleic acid) was investigated using thermal analysis, swelling studies, scanning electron microscopy (SEM) and attenuated total reflectance (ATR)-Fourier transform infrared (FTIR) spectroscopy. FTIR spectroscopy revealed a shift of the CO peak from 1708 to 1731 cm-1, indicating that an esterification reaction had occurred upon heating, thus producing crosslinked films. Higher molecular weight PEGs (10,000 and 1000 Da, respectively), having greater chain length, producing hydrogel networks with lower crosslink densities and higher average molecular weight between two consecutive crosslinks. Accordingly, such materials exhibited higher swelling rates. Hydrogels crosslinked with a low molecular weight PEG (PEG 200) showed rigid networks with high crosslink densities and, therefore, lower swelling rates. Polymer:plasticizer ratio alteration did not yield any discernable patterns, regardless of the method of analysis. The polymer–water interaction parameter (?) increased with increases in the crosslink density. SEM studies showed that porosity of the crosslinked films increased with increasing PEG MW, confirming what had been observed with swelling studies and thermal analysis, that the crosslink density must be decreased as the Mw of the crosslinker is increased. Hydrogels containing PMVE/MA/PEG 10,000 could be used for rapid delivery of drug, due to their low crosslink density. Moderately crosslinked PMVE/MA/PEG 1000 hydrogels or highly crosslinked PMVE/MA/PEG 200 systems could then be used in controlling the drug delivery rates. We are currently evaluating these systems, both alone and in combination, for use in sustained release drug delivery devices.

Green synthesis of biodiesel using ionic liquids

This paper is a hybrid starting with an overview and history of biodiesel synthesis and finishing with a description with some of our latest unpublished data. Initially, we examine "green" ways of obtaining biodiesel using ionic liquids, which can have an acidic or basic functionality, and can function both as a solvent and catalyst for the (trans)esterification reaction to obtain biodiesel. Both animal and vegetable resources can be utilized as a resource for (trans)esterification reactions depending on the geographical area. Biodiesel is of great interest because it enables motor vehicle transport using a renewable resource, while reducing the amount of carbon dioxide from fossil fuels being released into the environment.

Investigation of swelling and network parameters of poly(ethylene glycol)-crosslinked poly(methyl vinyl ether-co-maleic acid) hydrogels

The influence of poly(ethylene glycol) (PEG) plasticiser content and molecular weight on the physicochemical properties of films cast from aqueous blends of poly(methyl vinyl ether-co-maleic acid) was investigated using thermal analysis, swelling studies, scanning electron microscopy (SEM) and attenuated total reflectance (ATR)-Fourier transform infrared (FTIR) spectroscopy. FTIR spectroscopy revealed a shift of the C{double bond, long}O peak from 1708 to 1731 cm, indicating that an esterification reaction had occurred upon heating, thus producing crosslinked films. Higher molecular weight PEGs (10,000 and 1000 Da, respectively), having greater chain length, producing hydrogel networks with lower crosslink densities and higher average molecular weight between two consecutive crosslinks. Accordingly, such materials exhibited higher swelling rates. Hydrogels crosslinked with a low molecular weight PEG (PEG 200) showed rigid networks with high crosslink densities and, therefore, lower swelling rates. Polymer:plasticizer ratio alteration did not yield any discernable patterns, regardless of the method of analysis. The polymer-water interaction parameter (?) increased with increases in the crosslink density. SEM studies showed that porosity of the crosslinked films increased with increasing PEG MW, confirming what had been observed with swelling studies and thermal analysis, that the crosslink density must be decreased as the M of the crosslinker is increased. Hydrogels containing PMVE/MA/PEG 10,000 could be used for rapid delivery of drug, due to their low crosslink density. Moderately crosslinked PMVE/MA/PEG 1000 hydrogels or highly crosslinked PMVE/MA/PEG 200 systems could then be used in controlling the drug delivery rates. We are currently evaluating these systems, both alone and in combination, for use in sustained release drug delivery devices. © 2008 Elsevier Ltd. All rights reserved.

Nanostructure des particules polymériques : aspects physiques, chimiques et biologiques

Les nanotechnologies appliquées aux sciences pharmaceutiques ont pour but d’améliorer l’administration de molécules actives par l’intermédiaire de transporteurs nanométriques. Parmi les différents types de véhicules proposés pour atteindre ce but, on retrouve les nanoparticules polymériques (NP) constituées de copolymères “en bloc”. Ces copolymères permettent à la fois l’encapsulation de molécules actives et confèrent à la particule certaines propriétés de surface (dont l’hydrophilicité) nécessaires à ses interactions avec les milieux biologiques. L’architecture retenue pour ces copolymères est une structure constituée le plus fréquemment de blocs hydrophiles de poly(éthylène glycol) (PEG) associés de façon linéaire à des blocs hydrophobes de type polyesters. Le PEG est le polymère de choix pour conférer une couronne hydrophile aux NPs et son l’efficacité est directement liée à son organisation et sa densité de surface. Néanmoins, malgré les succès limités en clinique de ces copolymères linéaires, peu de travaux se sont attardés à explorer les effets sur la structure des NPs d’architectures alternatives, tels que les copolymères en peigne ou en brosse. Durant ce travail, plusieurs stratégies ont été mises au point pour la synthèse de copolymères en peigne, possédant un squelette polymérique polyesters-co-éther et des chaines de PEG liées sur les groupes pendants disponibles (groupement hydroxyle ou alcyne). Dans la première partie de ce travail, des réactions d’estérification par acylation et de couplage sur des groupes pendants alcool ont permis le greffage de chaîne de PEG. Cette méthode génère des copolymères en peigne (PEG-g-PLA) possédant de 5 à 50% en poids de PEG, en faisant varier le nombre de chaînes branchées sur un squelette de poly(lactique) (PLA). Les propriétés structurales des NPs produites ont été étudiées par DLS, mesure de charge et MET. Une transition critique se situant autour de 15% de PEG (poids/poids) est observée avec un changement de morphologie, d’une particule solide à une particule molle (“nanoagrégat polymére”). La méthode de greffage ainsi que l’addition probable de chaine de PEG en bout de chaîne principale semblent également avoir un rôle dans les changements observés. L’organisation des chaînes de PEG-g-PLA à la surface a été étudiée par RMN et XPS, méthodes permettant de quantifier la densité de surface en chaînes de PEG. Ainsi deux propriétés clés que sont la résistance à l’agrégation en conditions saline ainsi que la résistance à la liaison aux protéines (étudiée par isothermes d’adsorption et microcalorimétrie) ont été reliées à la densité de surface de PEG et à l’architecture des polymères. Dans une seconde partie de ce travail, le greffage des chaînes de PEG a été réalisé de façon directe par cyclo-adition catalysée par le cuivre de mPEG-N3 sur les groupes pendants alcyne. Cette nouvelle stratégie a été pensée dans le but de comprendre la contribution possible des chaines de PEG greffées à l’extrémité de la chaine de PLA. Cette librairie de PEG-g-PLA, en plus d’être composée de PEG-g-PLA avec différentes densités de greffage, comporte des PEG-g-PLA avec des PEG de différent poids moléculaire (750, 2000 et 5000). Les chaines de PEG sont seulement greffées sur les groupes pendants. Les NPs ont été produites par différentes méthodes de nanoprécipitation, incluant la nanoprécipitation « flash » et une méthode en microfluidique. Plusieurs variables de formulation telles que la concentration du polymère et la vitesse de mélange ont été étudiées afin d’observer leur effet sur les caractéristiques structurales et de surface des NPs. Les tailles et les potentiels de charges sont peu affectés par le contenu en PEG (% poids/poids) et la longueur des chaînes de PEG. Les images de MET montrent des objets sphériques solides et l'on n’observe pas d’objets de type agrégat polymériques, malgré des contenus en PEG comparable à la première bibliothèque de polymère. Une explication possible est l’absence sur ces copolymères en peigne de chaine de PEG greffée en bout de la chaîne principale. Comme attendu, les tailles diminuent avec la concentration du polymère dans la phase organique et avec la diminution du temps de mélange des deux phases, pour les différentes méthodes de préparation. Finalement, la densité de surface des chaînes de PEG a été quantifiée par RMN du proton et XPS et ne dépendent pas de la méthode de préparation. Dans la troisième partie de ce travail, nous avons étudié le rôle de l’architecture du polymère sur les propriétés d’encapsulation et de libération de la curcumine. La curcumine a été choisie comme modèle dans le but de développer une plateforme de livraison de molécules actives pour traiter les maladies du système nerveux central impliquant le stress oxydatif. Les NPs chargées en curcumine, montrent la même transition de taille et de morphologie lorsque le contenu en PEG dépasse 15% (poids/poids). Le taux de chargement en molécule active, l’efficacité de changement et les cinétiques de libérations ainsi que les coefficients de diffusion de la curcumine montrent une dépendance à l’architecture des polymères. Les NPs ne présentent pas de toxicité et n’induisent pas de stress oxydatif lorsque testés in vitro sur une lignée cellulaire neuronale. En revanche, les NPs chargées en curcumine préviennent le stress oxydatif induit dans ces cellules neuronales. La magnitude de cet effet est reliée à l’architecture du polymère et à l’organisation de la NP. En résumé, ce travail a permis de mettre en évidence quelques propriétés intéressantes des copolymères en peigne et la relation intime entre l’architecture des polymères et les propriétés physico-chimiques des NPs. De plus les résultats obtenus permettent de proposer de nouvelles approches pour le design des nanotransporteurs polymériques de molécules actives.

Surface acidity and catalytic activity of sulphated samaria

We have investigated the changes in surface acidity/basicity and catalytic pro~erties of samarium oxide due to surface modification by SO42- ion. The acidity/basicity of the catalysts is determined by titration method using Hammett indicators. Esterification of acetic acid by n-butanol is chosen as a test reaction. Sm203, owing to its high basicity and low acidity, does not catalyze the reaction. But sulphated Sm20J catalyzes the esterification reaction effectively. Activation temperature does not have much effect on the acidity of sulphated samaria.