Energy rehabilitation of social housing for rent, as demonstrator in the LIFE 'New4Old' Project

The main goal of the cofounded by the European Commission LIFE Project, New4Old (LIFE10 ENV/ES/439), is to define the most appropriate method and the best available practice in social housing rehabilitation with energy and environmental sustainability criteria, as well as to apply innovative technologies in the fight against climate change through an efficient use of resources and energy. The institutions involved in the Project are the Technological Centre AITEMIN, Madrid Polytechnic University (UPM), Portugal Technological Centre for Ceramics and Glass (CTCV) and the Zaragoza City Housing Society (SMZV). The demonstrator project consists in the energy rehabilitation of a rental social housing building located in Zaragoza?s historic quarter, according to the conclusions and strategies developed for the LIFE project. In actions taken in households of this nature passive design strategies are essential due to the limited income of owners, who often cannot afford energy bills. Therefore, the proposed actions will help improve the building?s passive performance and reach a higher thermal comfort, without increasing the economic cost linked to energy consumption.

Reabilitação energética de um edifício de índole cultural: Centro Cultural de Belém

Dissertação de Natureza Científica para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Reabilitação energética de um edifício de serviços: convergência para NZEB

Dissertação de Natureza Científica para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Reabilitação energética de edifícios

A reabilitação é uma intervenção que confere ao edifício uma qualidade superior à que possuía aquando da sua construção. Desta forma, e com a entrada em vigor em final de 2013 da nova legislação referente à certificação energética dos edifícios, surge novamente o interesse na temática de reabilitar energeticamente o parque habitacional. Esta nova legislação aparece na sequencia das novas exigências da Comissão Europeia e do Parlamento Europeu face às alterações climáticas e consequentemente, em relação à eficiência energética. A reabilitação energética de edifícios, visa principalmente a melhoria das condições de conforto térmico, a redução dos consumos energéticos com aquecimento, arrefecimento e as águas quentes sanitárias. Tais melhorias são alcançáveis com intervenções que se foquem na envolvente dos edifícios, com a aplicação de sistemas de alta eficiência para o aquecimento, arrefecimento, iluminação e águas quentes sanitárias e com a integração de fontes de energias renováveis. Assim é possível alcançar edifícios com necessidades nulas ou quase nulas de energia, tal como exigem as metas impostas a nível europeu.

Rehabilitación energética de fachadas: Propuesta metodológica para la evaluación de soluciones innovadoras, basándose en el diagnóstico de viviendas sociales construidas entre 1940 y 1980

Se propone una metodología para la evaluación de soluciones constructivas de fachada para la rehabilitación de viviendas sociales, construidas entre el final de la Guerra Civil y la entrada en vigor de la norma básica NBE-CT-79, sobre condiciones térmicas en edificios. La metodología parte por un lado del análisis del estado actual en las viviendas, y por otro de la caracterización de las soluciones constructivas de rehabilitación, para la evaluación conjunta de las posibles mejoras. Esta evaluación persigue valorar su repercusión en la calidad del ambiente interior, y en la reducción de la demanda energética para acondicionamiento térmico. Se aplica sobre dos viviendas tipo que se han monitorizado en Madrid, utilizando dos soluciones innovadoras para rehabilitación energética, que disponen de documentos de idoneidad DIT y DITE. Una incorpora sobre la fachada tipo un aislamiento por el exterior, y otra incorpora un sistema de fachada ventilada, también sobre esta fachada tipo. El análisis de las viviendas se ha realizado a partir de la toma de datos, ensayos y estudio de detalle, llevados a cabo a lo largo de los años 2014 y 2015. El análisis de los sistemas de fachada se ha realizado a partir de ensayos controlados, comparando los resultados para tres tipos de fachada: una fachada tipo, habitual en la construcción de las viviendas de este periodo, y las dos soluciones innovadoras mencionadas. Una vez realizado el diagnóstico de las viviendas y el análisis de los ensayos de los sistemas constructivos, los resultados obtenidos se utilizan para generar los modelos de simulación sobre los que evaluar las mejoras. El periodo de estudio comprende cuatro décadas que comienzan en 1940, en un momento con escasos medios técnicos para la construcción, y que coincide con el comienzo del crecimiento en las grandes ciudades, y finaliza con la incorporación en la normativa de las exigencias de aislamiento en fachadas, de 1979. En la ciudad de Madrid las viviendas construidas en este periodo, suponen un 45% del total de viviendas censadas en 2011. La rehabilitación energética se ha ido incorporando en los sucesivos planes nacionales de vivienda como actuación protegida, y son muchos y muy diversos los planes de acción desde la administración en materia de vivienda social, tanto a nivel nacional como europeo. La vivienda queda incluida en materia de desarrollo y cohesión urbana, territorial y social, haciendo necesario un enfoque integrado. Los barrios de vivienda social forman parte de un patrimonio construido en los que los criterios de sostenibilidad toman especial interés y relevancia, ya que a través del tiempo se han construido como actores y testigos de su historia social, económica, ambiental y cultural. El diseño de los modelos y actuaciones de futuro se sustenta en la asimilación de esa complejidad y diversidad adquirida. Por otro lado, el actual reto que impone el calentamiento global obliga a plantear escenarios de adaptación y mejora en estos edificios, con una especial atención a la dependencia energética, el consumo de recursos, y emisiones de gases de efecto invernadero. La fachada es el elemento más importante de la envolvente en los edificios multifamiliares, siendo el lugar donde se produce el intercambio entre el ambiente interior y exterior. Su rehabilitación puede mejorar las prestaciones de habitabilidad en las viviendas, y disminuir la demanda de energía para alcanzar unas condiciones de confort estándar. El trabajo de investigación que se ha realizado, forma parte de una linea de investigación abierta sobre sistemas constructivos y habitabilidad en edificación. ABSTRACT A methodology for the evaluation of facade’s constructive solutions for social housing refurbishment, built between the end of the Civil War, and the entry into force of the basic standard NBE-CT-79 on thermal conditions in buildings is proposed. This methodology starts both with the analysis of the current status in dwellings, and with the characterization of rehabilitation’s constructive solutions performance, for the integrated assessment of improvements. The evaluation seeks to assess their impact on the indoor environmental quality, and on reducing the energy demand for thermal conditioning. The methodology is applied to two standard dwellings, that have been monitored in Madrid, with two innovative solutions for energy refurbishment, which have DIT and DITE assessment documents. One incorporates an exterior insulation, and the other incorporates a ventilated facade system. The analysis of the dwellings was made from data collection, testing and detailed study, conducted throughout 2014 and 2015. Analysis of the facade systems was made from controlled trials comparing the results for three types of façade: a standard usual facade common in the construction of this period, and the two innovative solutions mentioned. Based on the diagnosis of housing and systems analysis, the results are used to generate simulation models on which assess the improvements. The study period comprises four decades starting in 1940, at a time with limited technical resources for construction, which coincides with the beginning of growth in big cities, and ends with the incorporation in the 1979 legislation of the façade’s insulation requirements. In the city of Madrid the houses built in this period account for 45% of all households surveyed in 2011. As a “protected action” energy rehabilitation has been incorporated in successive national housing plans, and there are many and very different action plans from the Administration in the field of social housing, both at national and European level. An integrated approach is needed, due to the inclusion of housing in development and urban, territorial and social cohesion. Social housing neighborhoods are part of the built heritage. Sustainability criteria therefore are particularely relevant, since over time they have been built as actors and witnesses of their social, economic, environmental and cultural history. The design and performance of future models is based on the assimilation of this complexity and diversity acquired. On the other hand, the current challenge posed by global warming forces to consider scenarios for adaptation and improvement in these buildings, with particular attention to energy dependence, resource consumption, and greenhouse gas emissions. The facade is the most important element of the envelope in the multi-family buildings, being the place where the exchange occurs between the indoor and outdoor environments. Its rehabilitation can improve wellbeing in housing performance, and reduce energy demand to achieve standard comfort conditions. This research that has been done, is part of an open research line on construction and living conditions in buildings.

Thermal characterization of urban heat island (UHI) according to urban morphology of Madrid

Present research is framed within the project MODIFICA (MODelo predictivo - edIFIcios - Isla de Calor Urbana) aimed at developing a predictive model for dwelling energy performance under the urban heat island effect in order to implement it in the evaluation of real energy demand and consumption of dwellings as well as in the selection of energy retrofitting strategies. It is funded by Programa de I+D+i orientada a los retos de la sociedad 'Retos Investigación' 2013. The scope of our predictive model is defined by the heat island effect (UHI) of urban structures that compose the city of Madrid. In particular, we focus on the homogeneous areas for urban structures with the same urban and building characteristics. Data sources for the definition of such homogeneous areas were provided by previous research on the UHI of Madrid. The objective is to establish a critical analysis of climate records used for energy simulation tools, which data come from weather stations placed in decontextualized areas from the usual urban reality, where the thermal conditions differs by up to 6ºC. In this way, we intend to develop a new predictive model for the consumption and demand in buildings depending on their location, the urban structure and the associated UHI, improving the future energy rehabilitation interventions

HUD rehabilitation energy guidelines for multi-family dwellings /

"September 1996."

HUD rehabilitation energy guidelines for one-to-four family dwellings /

Includes index.

Colorectal cancer survivors’ exercise experiences and preferences : qualitative findings from an exercise rehabilitation programme immediately after chemotherapy

Little is known about cancer survivors’ experiences with and preferences for exercise programmes offered during rehabilitation (immediately after cancer treatment). This study documented colorectal cancer survivors’ experiences in an exercise rehabilitation programme and their preferences for programme content and delivery. At the completion of 12-weeks of supervised exercise, 10 participants took part in one-on-one semi-structured interviews. Data from these interviews were coded, and themes were identified using qualitative software. Key findings were that most participants experienced improvements in treatment symptoms, including reduced fatigue and increased energy and confidence to do activities of daily living. They also reported that interactions with the exercise trainer and a flexible programme delivery were important aspects of the intervention. Most participants reported that they preferred having a choice of exercise, starting to exercise within a month after completing treatment, having supervision and maintaining a one-on-one format. Frustrations included scheduling conflicts and a lack of a transition out of the programme. The findings indicate that colorectal cancers experience benefits from exercise offered immediately after treatment and prefer individual attention from exercise staff. They further indicate directions for the implementation of future exercise programmes with this population.

Optimal Rehabilitation Strategy In Water Distribution Systems Considering Reduction In Greenhouse Gas Emissions

Most of water distribution systems (WDS) need rehabilitation due to aging infrastructure leading to decreasing capacity, increasing leakage and consequently low performance of the WDS. However an appropriate strategy including location and time of pipeline rehabilitation in a WDS with respect to a limited budget is the main challenge which has been addressed frequently by researchers and practitioners. On the other hand, selection of appropriate rehabilitation technique and material types is another main issue which has yet to address properly. The latter can affect the environmental impacts of a rehabilitation strategy meeting the challenges of global warming mitigation and consequent climate change. This paper presents a multi-objective optimization model for rehabilitation strategy in WDS addressing the abovementioned criteria mainly focused on greenhouse gas (GHG) emissions either directly from fossil fuel and electricity or indirectly from embodied energy of materials. Thus, the objective functions are to minimise: (1) the total cost of rehabilitation including capital and operational costs; (2) the leakage amount; (3) GHG emissions. The Pareto optimal front containing optimal solutions is determined using Non-dominated Sorting Genetic Algorithm NSGA-II. Decision variables in this optimisation problem are classified into a number of groups as: (1) percentage proportion of each rehabilitation technique each year; (2) material types of new pipeline for rehabilitation each year. Rehabilitation techniques used here includes replacement, rehabilitation and lining, cleaning, pipe duplication. The developed model is demonstrated through its application to a Mahalat WDS located in central part of Iran. The rehabilitation strategy is analysed for a 40 year planning horizon. A number of conventional techniques for selecting pipes for rehabilitation are analysed in this study. The results show that the optimal rehabilitation strategy considering GHG emissions is able to successfully save the total expenses, efficiently decrease the leakage amount from the WDS whilst meeting environmental criteria.

Step Counting and Energy Expenditure Estimation in Patients With Chronic Obstructive Pulmonary Disease and Healthy Elderly: Accuracy of 2 Motion Sensors

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resting energy expenditure and carbohydrate oxidation are higher in elderly patients with COPD: a case control study

Background: Elderly patients with chronic obstructive pulmonary disease (COPD) usually have a compromised nutritional status which is an independent predictor of morbidity and mortality. To know the Resting Energy Expenditure (REE) and the substrate oxidation measurement is essential to prevent these complications. This study aimed to compare the REE, respiratory quotient (RQ) and body composition between patients with and without COPD.Methods: This case-control study assessed 20 patients with chronic obstructive pulmonary disease attending a pulmonary rehabilitation program. The group of subjects without COPD (control group) consisted of 20 elderly patients attending a university gym, patients of a private service and a public healthy care. Consumption of oxygen (O-2) and carbon dioxide (CO2) was determined by indirect calorimetry and used for calculating the resting energy expenditure and respiratory quotient. Body mass index (BMI) and waist circumference (WC) were also measured. Percentage of body fat (%BF), lean mass (kg) and muscle mass (kg) were determined by bioimpedance. The fat free mass index (FFMI) and muscle mass index (MMI) were then calculated.Results: The COPD group had lower BMI than control (p = 0.02). However, WC, % BF, FFMI and MM-I did not differ between the groups. The COPD group had greater RQ (p = 0.01), REE (p = 0.009) and carbohydrate oxidation (p = 0.002).Conclusions: Elderly patients with COPD had higher REE, RQ and carbohydrate oxidation than controls.

Analysis of failed commercially pure titanium dental implants: A scanning electron microscopy and energy-dispersive spectrometer X-ray study

Background: the failure of osseointegration in oral rehabilitation has gained importance in current literature and in clinical practice. The integration of titanium dental implants in alveolar bone has been partly ascribed to the biocompatibility of the implant surface oxide layer. The aim of this investigation was to analyze the surface topography and composition of failed titanium dental implants in order to determine possible causes of failure.Methods: Twenty-one commercially pure titanium (cpTi) implants were retrieved from 16 patients (mean age of 50.33 +/- 11.81 years). Fourteen implants were retrieved before loading (early failures), six after loading (late failures), and one because of mandibular canal damage. The failure criterion was lack of osseointegration characterized as dental implant mobility. Two unused implants were used as a control group. All implant surfaces were examined by scanning electron microscopy (SEM) and energy-dispersive spectrometer x-ray (EDS) to element analysis. Evaluations were performed on several locations of the same implant.Results: SEM showed that the surface of all retrieved implants consisted of different degrees of organic residues, appearing mainly as dark stains. The surface topography presented as grooves and ridges along the machined surface similar to control group. Overall, foreign elements such as carbon, oxygen, sodium, calcium, silicon, and aluminum were detected in failed implants. The implants from control group presented no macroscopic contamination and clear signs of titanium.Conclusion: These preliminary results do not suggest any material-related cause for implant failures, although different element composition was assessed between failed implants and control implants.