Model-independent bounds for the potential and kinetic energy of liquid 4He at zero temperature

Using the experimental values of the chemical potentials of liquid 4He and of a 3He impurity in liquid 4He, we derive a model-independent lower (upper) bound to the kinetic (potential) energy per particle at zero temperature. The values of the bounds at the experimental saturation density are 13.42 K for the kinetic energy and -20.59 K for the potential energy. All the theoretical calculations based on the Lennard-Jones potential violate the upper-bound condition for the potential energy.

Apparent digestibility coefficients of selected feed ingredients for dourado Salminus brasiliensis

The excellence of its flesh and fast growth makes the dourado, Salminus brasiliensis, a carnivorous fish native to the Prata basin, a potential candidate for intensive fish farming. This study evaluated the apparent digestibility coefficients (ADC) of energy and nutrients of animal and plant protein sources for the carnivorous Characin dourado S. brasiliensis. Fish (19.5 +/- 5.0 g) were stocked in plastic cages (80-L) and fed pelleted test diets containing 30% of the test ingredient [fish meal (FM), poultry by-product meal (PBM), soybean meal (SBM), and corn gluten meal (CGM) plus 70% of a reference diet (481.4 g kg(-1) of crude protein and 18.63 kJ of gross energy per gram]. After the last daily meal, cages were transferred to cylindrical, conical-bottomed aquarium (200-L) where faeces were collected by sedimentation in a refrigerated container. Except for ADC of protein and energy, all other ADC of nutrients showed significant differences (P < 0.01). ADC values were: 94.3%, 91.3%, 93.1%, and 93.5% for crude protein; 91.0%, 90.3%, 87.8%, and 88.8% for gross energy; 92.1%, 84.5%, 80.6%, and 79.3% for ash; 83.9%, 80.3%, 84.3%, and 84.6% for dry matter; 97.4%, 96.7%, 93.3%, and 91.5% for lipid for FM, PBM, SBM, and CGM, respectively. The average amino acid ADC was: 93.6%, 90.0%, 92.1%, and 92.5% of FM, PBM, SBM, and CGM, respectively. All test ingredients were efficiently used and can partially replace FM in diets for carnivorous dourado.

Metanolin tuotanto biomassasta

Tämä työ käsittelee eri tapoja, joilla biomassasta voidaan valmistaa metanolia. Työssä käydään läpi eri valmistusreitit sekä tarkastellaan biomassaa raaka-aineena. Työhön on myös koottu joidenkin maailmalla tehtyjen tutkimusten aine- ja energiataseita. Tutkimusten pohjalta mietitään onko metanolin tuotanto liikennepolttoaineeksi tällä hetkellä taloudellisesti tai energiatehokkuudeltaan järkevää. Metanolia voidaan valmistaa biomassasta pääsääntöisesti viidellä eri tavalla. Ensimmäinen tapa on kaasuttaa biomassaa, jolloin tuotetaan raaka-kaasua. Raaka-kaasusta jalostetaan synteesikaasua, josta voidaan metanolisynteesillä valmistaa metanolia. Toinen tapa metanolin valmistamiseksi on liittää tuotanto sellunkeiton yhteyteen. Tällöin raaka-aineena olisi selluprosessissa syntyvä mustalipeä, josta metanoli voidaan erottaa. Kolmas mahdollinen valmistusprosessi on biomassan mädätys. Mädätyksessä syntyy biokaasua, josta jalostetaan synteesikaasuaja siitä edelleen metanolia. Neljäs keino metanolin valmistamiseksi biomassasta on pyrolyysi. Puun pyrolyysissä puu kuumennetaan nopeasti hapettomissa tai rajallisen hapensaannin olosuhteissa. Prosessissa syntyvästä pyrolyysiöljystä voidaan erottaa metanolia tislaamalla. Viides mahdollinen reitti metanolin valmistukselle on Fischer¬–Tropsch-synteesi. Biomassasta saatu synteesikaasu johdetaan FT-synteesiin, jossa katalyyttisesti saadaan hiilivetyjen ohella tuotettua metanolia. Biopolttoaineiden kuten metanolin valmistusprosesseja tutkitaan ja kehitetään jatkuvasti, sillä uusiutumattomat energianlähteet eivät riitä loputtomasti ja niiden aiheuttamia hiilidioksidipäästöjä halutaan vähentää. Tällä hetkellä tuotantoteknologiat eivät ole vielä tarpeeksi kehittyneet, jotta tuotanto saataisiin vastaamaan kulutusta. Metanolia ei kuitenkaan vielä voida käyttää sellaisenaan liikennepolttoaineena, joten metanolin markkinat ainakin vielä ovat sillä saralla varsin kapeat.

Simplified quartessence cosmology

We propose a new class of accelerating world models unifying the cosmological dark sector (dark matter and dark energy). All the models are described by a simplified version of the Chaplygin gas quartessence cosmology. It is found that even for Omega(k) not equal 0, this quartessence scenario depends only on a pair of parameters which can severely be constrained by the cosmological tests. As an example we perform a joint analysis involving the latest SNe type la data and the recent Sloan Digital Sky Survey measurement of baryon acoustic oscillations. In our analysis we have considered the SNe type la Union sample compiled by Kowalski et al. [M. Kowalski et al., Astrophys. J. 686 (2008) 749, arXiv:0804.4142]. At 95.4% (c.l.), we find for BAD + Union sample, alpha = 0.81(-0.04)(+0.04) and Omega(Q4) = 1.15(-0.17)(+0.16) The best-fit for this simplified quartessence scenario is a spatially closed Universe and its reduced chi(2) is exactly the same of the flat concordance model (Lambda CDM). (C) 2009 Elsevier B.V. All rights reserved.

Evaluation of a PVT Air Collector

Hybrid Photovoltaic Thermal (PVT) collectors are an emerging technology that combines PV and solar thermal systems in a single solar collector producing heat and electricity simultaneously. The focus of this thesis work is to evaluate the performance of unglazed open loop PVT air system integrated on a garage roof in Borlänge. As it is thought to have a significant potential for preheating ventilation of the building and improving the PV modules electrical efficiency. The performance evaluation is important to optimize the cooling strategy of the collector in order to enhance its electrical efficiency and maximize the production of thermal energy. The evaluation process involves monitoring the electrical and thermal energies for a certain period of time and investigating the cooling effect on the performance through controlling the air mass flow provided by a variable speed fan connected to the collector by an air distribution duct. The distribution duct transfers the heated outlet air from the collector to inside the building. The PVT air collector consists of 34 Solibro CIGS type PV modules (115 Wp for each module) which are roof integrated and have replaced the traditional roof material. The collector is oriented toward the south-west with a tilt of 29 ᵒ. The collector consists of 17 parallel air ducts formed between the PV modules and the insulated roof surface. Each air duct has a depth of 0.05 m, length of 2.38 m and width of 2.38 m. The air ducts are connected to each other through holes. The monitoring system is based on using T-type thermocouples to measure the relevant temperatures, air sensor to measure the air mass flow. These parameters are needed to calculate the thermal energy. The monitoring system contains also voltage dividers to measure the PV modules voltage and shunt resistance to measure the PV current, and AC energy meters which are needed to calculate the produced electrical energy. All signals recorded from the thermocouples, voltage dividers and shunt resistances are connected to data loggers. The strategy of cooling in this work was based on switching the fan on, only when the difference between the air duct temperature (under the middle of top of PV column) and the room temperature becomes higher than 5 °C. This strategy was effective in term of avoiding high electrical consumption by the fan, and it is recommended for further development. The temperature difference of 5 °C is the minimum value to compensate the heat losses in the collecting duct and distribution duct. The PVT air collector has an area of (Ac=32 m2), and air mass flow of 0.002 kg/s m2. The nominal output power of the collector is 4 kWppv (34 CIGS modules with 115 Wppvfor each module). The collector produces thermal output energy of 6.88 kWth/day (0.21 kWth/m2 day) and an electrical output energy of 13.46 kWhel/day (0.42 kWhel/m2 day) with cooling case. The PVT air collector has a daily thermal energy yield of 1.72 kWhth/kWppv, and a daily PV electrical energy yield of 3.36 kWhel /kWppv. The fan energy requirement in this case was 0.18 kWh/day which is very small compared to the electrical energy generated by the PV collector. The obtained thermal efficiency was 8 % which is small compared to the results reported in literature for PVT air collectors. The small thermal efficiency was due to small operating air mass flow. Therefore, the study suggests increasing the air mass flow by a factor of 25. The electrical efficiency was fluctuating around 14 %, which is higher than the theoretical efficiency of the PV modules, and this discrepancy was due to the poor method of recording the solar irradiance in the location. Due to shading effect, it was better to use more than one pyranometer.

Pflanzlicher Lichtsammler (LHCII) in Hybridkomplexen mit organischen Farbstoffen und anorganischen Halbleiter-Nanokristallen (Quantum dots)

Der Lichtsammelkomplex II (LHCII) höherer Pflanzen ist eines der häufigsten Membranproteine der Welt. Er bindet 14 Chlorophylle und 4 Carotinoide nicht kovalent und fungiert in vivo als Lichtantenne des Photosystems II. Eine optimale Absorption von Licht ist auch bei Solarzellen entscheidend und es liegt nahe hier dasselbe Prinzip zu verwenden. Dafür bietet sich der Einsatz biologischer Komponenten wie des LHCII an. Dieser wurde evolutionär für eine effektive Absorption und Weiterleitung von Sonnenenergie optimiert. Zusätzlich lässt er sich in vitro in rekombinanter Form rekonstituieren. Für eine eventuelle Nutzung des LHCII in technologischen Anwendungen bedarf es der Interaktion mit anderen, vorzugsweise synthetischen Komponenten. Daher wurde die Bindung und der Energietransfer zwischen dem LHCII und organischen Fluoreszenzfarbstoffen sowie anorganischen „Quantum dots“ (QDs) untersucht. rnMit Donorfarbstoffen wurde die Grünlücke des LHCII funktionell geschlossen. Dafür wurden bis zu vier Fluoreszenzfarbstoffe kovalent an den LHCII gebunden. Diese Interaktion erfolgte sowohl mit Maleimiden an Cysteinen als auch mit N-Hydroxysuccinimidylestern an Lysinen. Die Assemblierung, Struktur und Funktion des Pigment-Protein-Komplexes wurde durch die Fluoreszenzfarbstoffe nicht gestört.rnAuf der Suche nach einem Farbstoff, der als Akzeptor die vom LHCII aufgenommene Energie übernimmt und durch Elektronenabgabe in elektrische Energie umwandelt, wurden drei Rylenfarbstoffe, ein Quaterrylen und zwei Terrylene, untersucht. Der LHCII konnte mit allen Farbstoffen erfolgreich markiert werden. Für die Nutzung der Hybridkomplexe ergaben sich allerdings Probleme. Das Quaterrylen beeinträchtigte aufgrund seiner Hydrophobizität die Rekonstitution des Proteins, während bei beiden Terrylenen der Energietransfer ineffizient war.rn Zusätzlich zu den Standard-Verknüpfungen zwischen Farbstoffen und Proteinen wurde in dieser Arbeit die „native chemische Ligation“ etabliert. Hierfür wurde eine LHCII-Mutante mit N-terminalem Cystein hergestellt, markiert und rekonstituiert. Messdaten an diesem Hybridkomplex ließen auf einen Energietransfer zwischen Farbstoff und Protein schließen. rnIn Hybridkomplexen sollen langfristig zur Ladungstrennung fähige Typ II-QDs Anwendung finden, wobei der LHCII als Lichtantenne dienen soll. Bis diese QDs verwendet werden können, wurden grundlegende Fragen der Interaktion beider Materialen an Typ I-QDs mit Energietransfer zum LHCII untersucht. Dabei zeigte sich, dass QDs in wässriger Lösung schnell aggregieren und entsprechende Kontrollen wichtig sind. Weiterführend konnte anhand der Trennung von ungebundenem und QD-gebundenem LHCII die Bindung von LHCII an QDs bestätigt werden. Dabei wurden Unterschiede in der Bindungseffizienz in Abhängigkeit der verwendeten LHCII und QDs festgestellt. Durch Herstellung von Fusionsproteinen aus LHCII und Affinitätspeptiden konnte die Bindung optimiert werden. Ein Energietransfer von QDs zu LHCII war nicht sicher nachzuweisen, da in den Hybridkomplexen zwar die QD- (Donor-) Fluoreszenz gelöscht, aber die LHCII- (Akzeptor-) Fluoreszenz nicht entsprechend stimuliert wurde.rnZusammenfassend wurden in dieser Arbeit einige Hybridkomplexe hergestellt, die in weiterführenden Ansätzen Verwendung finden können. Auf die hier gewonnenen Erkenntnisse über Interaktionen zwischen LHCII und synthetischen Materialien kann jetzt weiter aufgebaut werden.

Effect of segmented anodes on the performance and plume of a hall thruster

Development of alternative propellants for Hall thruster operation is an active area of research. Xenon is the current propellant of choice for Hall thrusters, but can be costly in large thrusters and for extended test periods. Condensible propellants may offer an alternative to xenon, as they will not require costly active pumping to remove from a test facility, and may be less expensive to purchase. A method has been developed which uses segmented electrodes in the discharge channel of a Hall thruster to divert discharge current to and from the main anode and thus control the anode temperature. By placing a propellant reservoir in the anode, the evaporation rate, and hence, mass flow of propellant can be controlled. Segmented electrodes for thermal control of a Hall thruster represent a unique strategy of thruster design, and thus the performance of the thruster must be measured to determine the effect the electrodes have on the thruster. Furthermore, the source of any changes in thruster performance due to the adjustment of discharge current between the shims and the main anode must be characterized. A Hall thruster was designed and constructed with segmented electrodes. It was then tested at anode voltages between 300 and 400 V and mass flows between 4 and 6 mg/s, as well as 100%, 75%, 50%, 25%, and <5% of the discharge current on the shim electrodes. The level of current on the shims was adjusted by changing the shim voltage. At each operating point, the thruster performance, plume divergence, ion energy, and multiply charged ion fraction were measured performance exhibited a small change with the level of discharge current on the shim electrodes. Thrust and specific impulse increased by as much as 6% and 7.7%, respectively, as discharge current was shifted from the main anode to the shims at constant anode voltage. Thruster efficiency did not change. Plume divergence was reduced by approximately 4 degrees of half-angle at high levels of current on the shims and at all combinations of mass flow and anode voltage. The fraction of singly charged xenon in the thruster plume varied between approximately 80% and 95% as the anode voltage and mass flow were changed, but did not show a significant change with shim current. Doubly and triply charged xenon made up the remainder of the ions detected. Ion energy exhibited a mixed behavior. The highest voltage present in the thruster largely dictated the most probable energy; either shim or anode voltage, depending on which was higher. The overall change in most probable ion energy was 20-30 eV, the majority of which took place while the shim voltage was higher than the anode voltage. The thrust, specific impulse, plume divergence, and ion energy all indicate that the thruster is capable of a higher performance output at high levels of discharge current on the shims. The lack of a change in efficiency and fraction of multiply charged ions indicate that the thruster can be operated at any level of current on the shims without detrimental effect, and thus a condensible propellant thruster can control the anode temperature without a decrease in efficiency or a change in the multiply charged ion fraction.

[Future cardiac pacemakers – technical visions].

Cardiac pacemakers are routinely used for the treatment of bradyarrhythmias. Contemporary pacemakers are reliable and allow for a patient specific programming. However, pacemaker replacements due to battery depletion are common (~25 % of all implantation procedures) and bear the risk of complications. Batteryless pacemakers may allow overcoming this limitation. To power a batteryless pacemaker, a mechanism for intracorporeal energy harvesting is required. Such a generator may consist out of subcutaneously implanted solar cells, transforming the small amount of transcutaneously available light into electrical energy. Alternatively, intravascular turbines may harvest energy from the blood flow. Energy may also be harvested from the ventricular wall motion by a dedicated mechanical clockwork converting motion into electrical energy. All these approaches have successfully been tested in vivo. Pacemaker leads constitute another Achilles heel of contemporary pacemakers. Thus, leadless devices are desired. Miniaturized pacemaker circuits and suitable energy harvesting mechanisms (incorporated in a single device) may allow catheter-based implantation of the pacemaker in the heart. Such miniaturized battery- and leadless pacemakers would combine the advantages of both approaches and overcome major limitations of today’s systems.

New negative temperature coefficient thermistor ceramics in Mn-doped CaCu3-xMnxTi4O12 (0≤x≤1) system

New negative temperature coefficient (NTC) ceramics based on CaCu 3-xMnxTi4O12 (0≤x≤1) compositions have been investigated. The grain size of the CaCu 3-xMnxTi4O12 samples decreases at first and then increases with increasing Mn content. The X-ray photoelectron spectroscopy analysis corroborates the presence of Mn3+ and Mn 4+ in Mn-doped samples, which results in a decrease in the activation energy. All the NTC thermistors prepared show a linear relationship between the natural logarithm of the resistivity and the reciprocal temperature, indicative of NTC characteristics. The Mn-doped CaCu3-xMnxTi 4O12 NTC thermistors provide various electrical properties, depending on Mn content. The values of ρ25, B constant and activation energy of the NTC thermistors are in the range of 2.22×106-3.22×108 Ω cm, 5488-8031 K, and 0.473-0.692 eV, respectively. © 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Relative Energy Balance, CKD, and Risk of Cardiovascular and All-Cause Mortality.

BACKGROUND Mortality risk for people with chronic kidney disease is substantially greater than that for the general population, increasing to a 7-fold greater risk for those on dialysis therapy. Higher body mass index, generally due to higher energy intake, appears protective for people on dialysis therapy, but the relationship between energy intake and survival in those with reduced kidney function is unknown. STUDY DESIGN Prospective cohort study with a median follow-up of 14.5 (IQR, 11.2-15.2) years. SETTING & PARTICIPANTS Blue Mountains Area, west of Sydney, Australia. Participants in the general community enrolled in the Blue Mountains Eye Study (n=2,664) who underwent a detailed interview, food frequency questionnaire, and physical examination including body weight, height, blood pressure, and laboratory tests. PREDICTORS Relative energy intake, food components (carbohydrates, total sugars, fat, protein, and water), and estimated glomerular filtration rate (eGFR). Relative energy intake was dichotomized at 100%, and eGFR, at 60mL/min/1.73m(2). OUTCOMES All-cause and cardiovascular mortality. MEASUREMENTS All-cause and cardiovascular mortality using unadjusted and adjusted Cox proportional regression models. RESULTS 949 people died during follow-up, 318 of cardiovascular events. In people with eGFR<60mL/min/1.73m(2) (n=852), there was an increased risk of all-cause mortality (HR, 1.48; P=0.03), but no increased risk of cardiovascular mortality (HR, 1.59; P=0.1) among those with higher relative energy intake compared with those with lower relative energy intake. Increasing intake of carbohydrates (HR per 100g/d, 1.50; P=0.04) and total sugars (HR per 100g/d, 1.62; P=0.03) was associated significantly with increased risk of cardiovascular mortality. LIMITATIONS Under-reporting of energy intake, baseline laboratory and food intake values only, white population. CONCLUSIONS Increasing relative energy intake was associated with increased all-cause mortality in patients with eGFR<60mL/min/1.73m(2). This effect may be mediated by increasing total sugars intake on subsequent cardiovascular events.

Low-cost batteries will not disrupt (all) energy utilities. CEPS Commentary, 5 October 2015

With the launch last April of an affordable lithium-ion home battery – the Powerwall – Tesla’s CEO Elon Musk is betting that batteries are going to become a mass market. This may very well become reality, but this commentary argues that one should not jump to the conclusion that this is the end of energy utilities. Similar to solar panels, batteries have high upfront costs. The massive deployment of solar was driven by dedicated policy support, in many cases without any kind of cost or volume control. There is no such thing for batteries. In the absence of financing programmes, the author finds that high upfront costs provide an unfavourable starting point for a disruptive development. But he notes that the fact that self-consumption of stored solar energy will soon pay for consumers represents a paradigm shift in the power industry, which should be seen as an opportunity, at least for first-movers.

Development of sustainable, innovative and energy-efficient concrete, based on the integration of all-waste materials: SUS-CON panels for building applications

The building sector requires the worldwide production of 4 billion tonnes of cement annually, consuming more than 40% of global energy and accounting for about 8% of the total CO2 emissions. The SUS-CON project aimed at integrating waste materials in the production cycle of concrete, for both ready-mixed and pre-cast applications, resulting in an innovative light-weight, ecocompatible and cost-effective construction material, made by all-waste materials and characterized by enhanced thermal insulation performance and low embodied energy and CO2. Alkali activated “cementless” binders, which have recently emerged as eco-friendly construction materials, were used in conjunction with lightweight recycled aggregates to produce sustainable concrete for a range of applications. This paper presents some results from the development of a concrete made with a geopolymeric binder (alkali activated fly ash) and aggregate from recycled mixed plastic. Mix optimisation was achieved through an extensive investigation on production parameters for binder and aggregate. The mix recipe was developed for achieving the required fresh and hardened properties. The optimised mix gave compressive strength of about 7 MPa, flexural strength of about 1.3 MPa and a thermal conductivity of 0.34 W/mK. Fresh and hardened properties were deemed suitable for the industrial production of precast products. Precast panels were designed and produced for the construction of demonstration buildings. Mock-ups of about 2.5 x 2.5 x 2.5 m were built at a demo park in Spain both with SUS-CON and Portland cement concrete, monitoring internal and external temperatures. Field results indicate that the SUS-CON mock-ups have better insulation. During the warmest period of the day, the measured temperature in the SUS-CON mock-ups was lower.

Hypothalamic Inflammation And The Central Nervous System Control Of Energy Homeostasis.

The control of energy homeostasis relies on robust neuronal circuits that regulate food intake and energy expenditure. Although the physiology of these circuits is well understood, the molecular and cellular response of this program to chronic diseases is still largely unclear. Hypothalamic inflammation has emerged as a major driver of energy homeostasis dysfunction in both obesity and anorexia. Importantly, this inflammation disrupts the action of metabolic signals promoting anabolism or supporting catabolism. In this review, we address the evidence that favors hypothalamic inflammation as a factor that resets energy homeostasis in pathological states.