1000 resultados para Embriologia vegetal
Resumo:
Background Plant hormones play a pivotal role in several physiological processes during a plant's life cycle, from germination to senescence, and the determination of endogenous concentrations of hormones is essential to elucidate the role of a particular hormone in any physiological process. Availability of a sensitive and rapid method to quantify multiple classes of hormones simultaneously will greatly facilitate the investigation of signaling networks in controlling specific developmental pathways and physiological responses. Due to the presence of hormones at very low concentrations in plant tissues (10-9 M to 10-6 M) and their different chemistries, the development of a high-throughput and comprehensive method for the determination of hormones is challenging. Results The present work reports a rapid, specific and sensitive method using ultrahigh-performance liquid chromatography coupled to electrospray ionization tandem spectrometry (UPLC/ESI-MS/MS) to analyze quantitatively the major hormones found in plant tissues within six minutes, including auxins, cytokinins, gibberellins, abscisic acid, 1-amino-cyclopropane-1-carboxyic acid (the ethylene precursor), jasmonic acid and salicylic acid. Sample preparation, extraction procedures and UPLC-MS/MS conditions were optimized for the determination of all plant hormones and are summarized in a schematic extraction diagram for the analysis of small amounts of plant material without time-consuming additional steps such as purification, sample drying or re-suspension. Conclusions This new method is applicable to the analysis of dynamic changes in endogenous concentrations of hormones to study plant developmental processes or plant responses to biotic and abiotic stresses in complex tissues. An example is shown in which a hormone profiling is obtained from leaves of plants exposed to salt stress in the aromatic plant, Rosmarinus officinalis.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Studies in several countries have shown the occurrence of forest transition, when forest cover increase overcomes the loss by deforestation. In Brazil, although deforestation is still higher than afforestation, this relationship may be inverse in some regions. Recent assessments suggest the tendency of the state of São Paulo towards forest transition. Aiming to analyze forest transition evidence and facilitate the use of existing information, we review data on native vegetation cover variation in São Paulo from four data sources (Instituto Florestal, SOS MataAtlântica/INPE, IBGE and CATI/IEA). Our results indicate that discrepancies among these assessments may be accounted by differences in methodologies and objectives. We highlight their common grounds and discuss possibilities to harmonize their information.
Resumo:
The durability of the cellulose-cement composites is a decisive factor to introduce such material in the market. Polymers have been used in concrete and mortar production to increase its durability. The goal of this work was the physical and mechanical characterization of cellulose-cement composites modified by a polymer and the subsequent durability evaluation. The work also evaluated the dispersion of acrylic polymer in composites made of Pinus caribaea residues. The physical properties observed were water absorption by immersion and bulk density. Rupture modulus and toughness were determined by flexural test. The specimens were obtained from pads, produced by pressing and wet curing. Samples were subjected to accelerated aging tests by repeated wetting and drying cycles and hot-water bath and natural aging. The scanning electron microscopy (SEM) allowed verifying the fiber and composite characteristics along the time. For the composite range analyzed, it was observed the polymer improved the mechanical properties of composites besides a significant decreasing in water absorption. The use of polymer improved the performance of vegetable fiber-cement composites when compared to the conventional mortar, due to water absorption decreasing.
Resumo:
A common breeding strategy is to carry out basic studies to investigate the hypothesis of a single gene controlling the trait (major gene) with or without polygenes of minor effect. In this study we used Bayesian inference to fit genetic additive-dominance models of inheritance to plant breeding experiments with multiple generations. Normal densities with different means, according to the major gene genotype, were considered in a linear model in which the design matrix of the genetic effects had unknown coefficients (which were estimated in individual basis). An actual data set from an inheritance study of partenocarpy in zucchini (Cucurbita pepo L.) was used for illustration. Model fitting included posterior probabilities for all individual genotypes. Analysis agrees with results in the literature but this approach was far more efficient than previous alternatives assuming that design matrix was known for the generations. Partenocarpy in zucchini is controlled by a major gene with important additive effect and partial dominance.
Resumo:
Polycyclic aromatic hydrocarbons (PAHs) are a group of compounds that have been the subject of much concern due to their toxic potential. In this study, margarine?s, vegetable cream and mayonnaise available on the Brazilian market were analyzed for pyrene, chrysene, benzo(a)pyrene, benzo(b)fluoranthene and dibenzo(a,h)anthracene. The analytical methodology involved liquid-liquid extraction, clean-up on silica gel column and determination by high performance liquid chromatography using fluorescence detector. Variable levels of contamination were found within differents brands of the same product and within differents batches of the same brand. The total PAH content was in the range of 4.1 to 7.1mug/kg in vegetable cream, 1.7 to 3.9mug/kg in margarine and 1.0 to 21.7mug/kg in mayonnaise. In general the products which according to the label contain corn oil showed the highest levels of contamination. Based on these results and on the importance of fat, oils and derived products for the intake of PAHs, it is recommended that producers of margarine, vegetable creams and mayonnaise start to control the contamination of the vegetable oils used in the elaboration of these products, in order to reduce the exposure of consumers to excessive amounts of potentially carcinogenic compounds.
Resumo:
O problema era como estabelecer a conviv??ncia profissional e a uni??o de esfor??os entre o Minist??rio da Agricultura e seus ??rg??os conveniados ou entidades contratadas, de modo a obter um melhor gerenciamento da atividade de ???Classifica????o Vegetal???. A solu????o foi encontrada numa mudan??a de atitude a partir da qual seguiram-se diversas medidas pr??ticas: os agentes supervisores passaram a se conduzir como parceiros dos prestadores de servi??os ao inv??s de fiscais. A iniciativa promoveu a supera????o dos conflitos entre prestadores de servi??o e supervisores, com ganhos de efic??cia e efici??ncia na atividade de classifica????o vegetal, moderniza????o dos processos de classifica????o vegetal, que passam a adotar equipamentos, procedimentos e padr??es de n??vel internacional e a generaliza????o da experi??ncia para outras unidades federativas, que levou o Minist??rio da Agricultura a iniciar um trabalho de reformula????o da legisla????o que normatiza a realiza????o de cursos de classifica????o vegetal e disciplina o credenciamento de classificadores e professores
Resumo:
A aplicação de fertilizantes orgânicos, em plantas medicinais e aromáticas, normalmente modifica positivamente a produção vegetal e de óleo essencial. Neste contexto, tendo por fim avaliar a resposta de plantas de Plectranthus neochilus Schltr., cultivadas com diferentes fontes de adubos orgânicos, o presente trabalho estudou a produção de biomassa, teor, rendimento e composição química do óleo essencial. As mudas, após a aclimatização, foram transplantadas para vasos de dez litros, acondicionados em casa de vegetação. O experimento foi constituído por quatro tratamentos e quatro repetições (16 parcelas), sendo cada parcela composta por cinco vasos. Os tratamentos foram: ausência de adubo orgânico (testemunha); aplicação de 60 t ha-1 de esterco bovino; 30 t ha-1 de esterco avícola; 60 t ha-1 de composto orgânico. Aos 120 dias de cultivo, as plantas foram colhidas e uma parte das folhas frescas foi destinada à extração do óleo essencial. O restante do material vegetal foi seco em estufa, até atingir peso constante, para a determinação da biomassa seca. As análises químicas do óleo foram realizadas por cromatografia gasosa (CG-DIC e CG-EM). As fontes de adubo orgânico testadas promoveram diferenças entre os tratamentos em relação à produção de biomassa, rendimento e composição do óleo essencial de P. neochilus. A utilização de diferentes fertilizantes orgânicos não modificou o teor de óleo volátil.
Resumo:
[…]. O potencial biotecnológico das microalgas tem vindo a despertar elevado interesse devido à identificação das diversas substâncias sintetizadas por estes organismos e ao facto do seu cultivo apresentar vantagens relativamente a outros vegetais, nomeadamente: (i) têm um ciclo de vida muito rápido, o que resulta numa produtividade muito elevada por unidade de área; (ii) a sua natureza, maioritariamente unicelular, assegura uma biomassa com composição bioquímica semelhante; e iii) são responsáveis por um sequestro de CO2mais eficaz que o das plantas superiores. Compostos extraídos de microalgas com potencial comercial incluem ácidos gordos polinsaturados, carotenóides, polissacáridos, vitaminas, esteróis, antioxidantes, outros. […].
Resumo:
The present work aims at evaluating the efficiency of an organic polymer from vegetal source used as coagulant for treating different types of industrial effluents. This coagulant (Flox-QT) is obtained from the Black Acacia (Acacia mearnsii). The effluents studied were produced in petrochemical, leather, cork stoppers, metalworking, olive oil, glue, paint (printing), textile and paper industries. The parameters analyzed in the effluents before and after treatment were selected according to the type of wastewater and included pH, conductivity, apparent colour, turbidity, total suspended solids (TSS), chemical oxygen demand (COD) and some metals. The coagulant proved to be efficient for almost all effluents tested. The best results were obtained for the paper industry wastewater, with 91% removal of chemical oxygen demand and 95% of total suspended solids removal. The estimated cost of this treatment would be only 0.24 Euro per cubic meter of treated effluent, only regarding the price of the coagulant and the required dosage. The use of this coagulant is also adequate for the valorisation of the sludge obtained, which in this case could be recycled for paper production.
Resumo:
Mestrado em Engenharia Química - Ramo Optimização Energética na Indústria Química
Resumo:
Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Conservação e Restauro (Área de Documentos Gráficos)
Resumo:
Dissertação apresentada à Universidade Nova de Lisboa,Faculdade de Ciências e Tecnologia para a obtenção do grau de Mestre em Energia e Bioenergia