Tracing CO2 emissions in global value chains

This paper integrates two lines of research into a unified conceptual framework: trade in global value chains and embodied emissions. This allows both value added and emissions to be systematically traced at the country, sector, and bilateral levels through various production network routes. By combining value-added and emissions accounting in a consistent way, the potential environmental cost (amount of emissions per unit of value added) along global value chains can be estimated. Using this unified accounting method, we trace CO2 emissions in the global production and trade network among 41 economies in 35 sectors from 1995 to 2009, basing our calculations on the World Input–Output Database, and show how they help us to better understand the impact of cross-country production sharing on the environment.

Carbon emissions locked - in trade

In recent years there has been a growing concern about the emission trade balance of countries. It is due to the fact that countries with an open economy are active players in the international trade, though trade is not only a major factor in forging a country’s economic structure anymore, but it does contribute to the movement of embodied emissions beyond the country borders. This issue is especially relevant from the carbon accounting policy’s point of view, as it is known that the production-based principle is in effect now in the Kyoto agreement. The study aims at revealing the interdependence of countries on international trade and its environmental impacts, and how the carbon accounting method plays a crucial role in evaluating a country’s environmental performance and its role in the climate mitigation processes. The input-output models are used in the methodology, as they provide an appropriate framework for this kind of environmental accounting; the analysis shows an international comparison of four European countries (Germany, the United Kingdom, the Netherlands, and Hungary) with extended trading activities and carbon emissions. Moving from the production-based approach in the climate policy, to the consumptionperspective principle and allocation [15], it would also help increasing the efficiency of emission reduction targets and the evaluation of the sustainability dimension and its impacts of international trade. The results of the study have shown that there is an importance of distinction between the two emission allocation approaches, both from global and local level point of view.

Case study on the whole life carbon cycle in buildings

Global temperatures are expected to rise by between 1.1 and 6.4oC this century, depending, to a large extent, on the amount of carbon we emit to the atmosphere from now onwards. This warming is expected to have very negative effects on many peoples and ecosystems and, therefore, minimising our carbon emissions is a priority. Buildings are estimated to be responsible for around 50% of carbon emissions in the UK. Potential reductions involve both operational emissions, produced during use, and embodied emissions, produced during manufacture of materials and components, and during construction, refurbishments and demolition. To date the major effort has focused on reducing the, apparently, larger operational element, which is more readily quantifiable and reduction measures are relatively straightforward to identify and implement. Various studies have compared the magnitude of embodied and operational emissions, but have shown considerable variation in the relative values. This illustrates the difficulties in quantifying embodied, as it requires a detailed knowledge of the processes involved in the different life cycle phases, and requires the use of consistent system boundaries. However, other studies have established the interaction between operational and embodied, which demonstrates the importance of considering both elements together in order to maximise potential reductions. This is borne out in statements from both the Intergovernmental Panel on Climate Change and The Low Carbon Construction Innovation and Growth Team of the UK Government. In terms of meeting the 2020 and 2050 timeframes for carbon reductions it appears to be equally, if not more, important to consider early embodied carbon reductions, rather than just future operational reductions. Future decarbonisation of energy supply and more efficient lighting and M&E equipment installed in future refits is likely to significantly reduce operational emissions, lending further weight to this argument. A method of discounting to evaluate the present value of future carbon emissions would allow more realistic comparisons to be made on the relative importance of the embodied and operational elements. This paper describes the results of case studies on carbon emissions over the whole lifecycle of three buildings in the UK, compares four available software packages for determining embodied carbon and suggests a method of carbon discounting to obtain present values for future emissions. These form the initial stages of a research project aimed at producing information on embodied carbon for different types of building, components and forms of construction, in a simplified form, which can be readily used by building designers in optimising building design in terms of minimising overall carbon emissions. Keywords: Embodied carbon; carbon emission; building; operational carbon.

A Consumption-Based Approach to Carbon Emission Accounting – Sectoral Differences and Environmental Benefits

In recent years there has been growing concern about the emission trade balances of countries. This is due to the fact that countries with an open economy are active players in international trade. Trade is not only a major factor in forging a country’s economic structure, but contributes to the movement of embodied emissions beyond country borders. This issue is especially relevant from the carbon accounting policy and domestic production perspective, as it is known that the production-based principle is employed in the Kyoto agreement. The research described herein was designed to reveal the interdependence of countries on international trade and the corresponding embodied emissions both on national and on sectoral level and to illustrate the significance of the consumption-based emission accounting. It is presented here to what extent a consumption-based accounting would change the present system based on production-based accounting and allocation. The relationship of CO2 emission embodied in exports and embodied in imports is analysed here. International trade can blur the responsibility for the ecological effects of production and consumption and it can lengthen the link between consumption and its consequences. Input-output models are used in the methodology as they provide an appropriate framework for climate change accounting. The analysis comprises an international comparative study of four European countries (Germany, the United Kingdom, the Netherlands, and Hungary) with extended trading activities and carbon emissions. Moving from a production-based approach in climate policy to a consumption-based principle and allocation approach would help to increase the efficiency of emission reductions and would force countries to rethink their trading activities in order to decrease the environmental load of production activities. The results of this study show that it is important to distinguish between the two emission accounting approaches, both on the global and the local level.

CO2 emissions embodied in international trade: A multiregional Inputoutput model for Spain

As a result of globalization and free trade agreements, international trade is enormously growing and inevitably putting more pressure on the environment over the last few decades. This has drawn the attention of both environmentalist and economist in response to the ever growing concerns of climate change and urgent need of international action for its mitigation. In this work we aim at analyzing the implication of international trade in terms of CO2 between Spain and its important partners using a multi-regional input-output (MRIO) model. A fully integrated 13 regions MRIO model is constructed to examine the pollution responsibility of Spain both from production and consumption perspectives. The empirical results show that Spain is a net importer of CO2 emissions which is equivalent to 29% of its emission due to production. Even though the leading partner with regard to import values are countries such as Germany, France, Italy and Great Britain, the CO2 embodied due to trade with China takes the largest share. This is mainly due to the importation of energy intensive products from China coupled with Chinese poor energy mix which is dominated by coal-power plant. The largest portion (67%) of the global imported CO2 emissions is due to intermediate demand requirements by production sectors. Products such as Motor vehicles, chemicals, a variety of machineries and equipments, textile and leather products, construction materials are the key imports that drive the emissions due to their production in the respective exporting countries. Being at its peak in 2005, the Construction sector is the most responsible activity behind both domestic and imported emissions.

How does firm heterogeneity information impact the estimation of embodied carbon emissions in Chinese exports?

Using an augmented Chinese input–output table in which information about firm ownership and type of traded goods are explicitly reported, we show that ignoring firm heterogeneity causes embodied CO2 emissions in Chinese exports to be overestimated by 20% at the national level, with huge differences at the sector level, for 2007. This is because different types of firm that are allocated to the same sector of the conventional Chinese input–output table vary greatly in terms of market share, production technology and carbon intensity. This overestimation of export-related carbon emissions would be even higher if it were not for the fact that 80% of CO2 emissions embodied in exports of foreign-owned firms are, in fact, emitted by Chinese-owned firms upstream of the supply chain. The main reason is that the largest CO2 emitter, the electricity sector located upstream in Chinese domestic supply chains, is strongly dominated by Chinese-owned firms with very high carbon intensity.

Embodied pollution in Spanish household consumption: a disaggregate analysis

[spa] En este artículo aplicamos un modelo input-output ampliado medioambientalmente para analizar un aspecto específico de la hipótesis de la curva de Kuznets ambiental. El propósito del estudio es analizar si las estructuras de consumo de los hogares con una mejor ‘posición económica’ pueden tener un efecto positivo para reducir las presiones medioambientales. Para ello combinamos información de diferentes bases de datos para analizar el impacto de la contaminación atmosférica del consumo de diferentes hogares españoles en el año 2000. Consideramos nueve gases, i.e. los seis gases de efecto invernadero (CO2, CH4, N2O, SF6, HFCs, y PFCs) y otros tres gases (SO2, NOx, y NH3). Clasificamos los hogares en quintiles de gasto per capita y quintiles de gasto equivalente. Los resultados obtenidos muestran que hay una relación positiva y elevada entre el nivel de gasto y las emisiones directas e indirectas generadas por el consumo de los hogares; sin embargo, las intensidades de emisión tienden a disminuir con el nivel de gasto para los diferentes gases, con la excepción de SF6, HFCs, y PFCs.

Embodied pollution in Spanish household consumption: a disaggregate analysis

[spa] En este artículo aplicamos un modelo input-output ampliado medioambientalmente para analizar un aspecto específico de la hipótesis de la curva de Kuznets ambiental. El propósito del estudio es analizar si las estructuras de consumo de los hogares con una mejor ‘posición económica’ pueden tener un efecto positivo para reducir las presiones medioambientales. Para ello combinamos información de diferentes bases de datos para analizar el impacto de la contaminación atmosférica del consumo de diferentes hogares españoles en el año 2000. Consideramos nueve gases, i.e. los seis gases de efecto invernadero (CO2, CH4, N2O, SF6, HFCs, y PFCs) y otros tres gases (SO2, NOx, y NH3). Clasificamos los hogares en quintiles de gasto per capita y quintiles de gasto equivalente. Los resultados obtenidos muestran que hay una relación positiva y elevada entre el nivel de gasto y las emisiones directas e indirectas generadas por el consumo de los hogares; sin embargo, las intensidades de emisión tienden a disminuir con el nivel de gasto para los diferentes gases, con la excepción de SF6, HFCs, y PFCs.

A case study to investigate the life cycle carbon emissions and carbon storage capacity of a cross laminated timber, multi-storey residential building

Forests are a store of carbon and an eco-system that continually removes carbon dioxide from the atmosphere. If they are sustainably managed, the carbon store can be maintained at a constant level, while the trees removed and converted to timber products can form an additional long term carbon store. The total carbon store in the forest and associated ‘wood chain’ therefore increases over time, given appropriate management. This increasing carbon store can be further enhanced with afforestation. The UK’s forest area has increased continually since the early 1900s, although the rate of increase has declined since its peak in the late 1980s, and it is a similar picture in the rest of Europe. The increased sustainable use of timber in construction is a key market incentive for afforestation, which can make a significant contribution to reducing carbon emissions. The case study presented in this paper demonstrates the carbon benefits of a Cross Laminated Timber (CLT) solution for a multi-storey residential building in comparison with a more conventional reinforced concrete solution. The embodied carbon of the building up to completion of construction is considered, together with the stored carbon during the life of the building and the impact of different end of life scenarios. The results of the study show that the total stored carbon in the CLT structural frame is 1215tCO2 (30tCO2 per housing unit). The choice of treatment at end of life has a significant effect on the whole life embodied carbon of the CLT frame, which ranges from -1017 tCO2e for re-use to +153tCO2e for incinerate without energy recovery. All end of life scenarios considered result in lower total CO2e emissions for the CLT frame building compared with the reinforced concrete frame solution.

Time valued life cycle greenhouse gas emissions from buildings

The UK has adopted legally binding carbon reduction targets of 34% by 2020 and 80% by 2050 (measured against the 1990 baseline). Buildings are estimated to be responsible for more than 50% of greenhouse gas (GHG) emissions in the UK. These consist of both operational, produced during use, and embodied, produced during manufacture of materials and components, and during construction, refurbishments and demolition. A brief assessment suggests that it is unlikely that UK emission reduction targets can be met without substantial reductions in both Oc and Ec. Oc occurs over the lifetime of a building whereas the bulk of Ec occurs at the start of a building’s life. A time value for emissions could influence the decision making process when it comes to comparing mitigation measures which have benefits that occur at different times. An example might be the choice between building construction using low Ec construction materials versus building construction using high Ec construction materials but with lower Oc, although the use of high Ec materials does not necessarily imply a lower Oc. Particular time related issues examined here are: the urgency of the need to achieve large emissions reductions during the next 10 to 20 years; the earlier effective action is taken, the less costly it will be; future reduction in carbon intensity of energy supply; the carbon cycle and relationship between the release of GHG’s and their subsequent concentrations in the atmosphere. An equation is proposed, which weights emissions according to when they occur during the building life cycle, and which effectively increases Ec as a proportion of the total, suggesting that reducing Ec is likely to be more beneficial, in terms of climate change, for most new buildings. Thus, giving higher priority to Ec reductions is likely to result in a bigger positive impact on climate change and mitigation costs.

Gross direct and embodied carbon sinks for urban inventories

Cities and urban regions are undertaking efforts to quantify greenhouse (GHG) emissions from their jurisdictional boundaries. Although inventorying methodologies are beginning to standardize for GHG sources, carbon sequestration is generally not quantified. This article describes the methodology and quantification of gross urban carbon sinks. Sinks are categorized into direct and embodied sinks. Direct sinks generally incorporate natural process, such as humification in soils and photosynthetic biomass growth (in urban trees, perennial crops, and regional forests). Embodied sinks include activities associated with consumptive behavior that result in the import and/or storage of carbon, such as landfilling of waste, concrete construction, and utilization of durable wood products. Using methodologies based on the Intergovernmental Panel on Climate Change 2006 guidelines (for direct sinks) and peer-reviewed literature (for embodied sinks), carbon sequestration for 2005 is calculated for the Greater Toronto Area. Direct sinks are found to be 317 kilotons of carbon (kt C), and are dominated by regional forest biomass. Embodied sinks are calculated to be 234 kt C based on one year's consumption, though a complete life cycle accounting of emissions would likely transform this sum from a carbon sink to a source. There is considerable uncertainty associated with the methodologies used, which could be addressed with city-specific stock-change measurements. Further options for enhancing carbon sink capacity within urban environments are explored, such as urban biomass growth and carbon capture and storage.

Optimal Rehabilitation Strategy In Water Distribution Systems Considering Reduction In Greenhouse Gas Emissions

Most of water distribution systems (WDS) need rehabilitation due to aging infrastructure leading to decreasing capacity, increasing leakage and consequently low performance of the WDS. However an appropriate strategy including location and time of pipeline rehabilitation in a WDS with respect to a limited budget is the main challenge which has been addressed frequently by researchers and practitioners. On the other hand, selection of appropriate rehabilitation technique and material types is another main issue which has yet to address properly. The latter can affect the environmental impacts of a rehabilitation strategy meeting the challenges of global warming mitigation and consequent climate change. This paper presents a multi-objective optimization model for rehabilitation strategy in WDS addressing the abovementioned criteria mainly focused on greenhouse gas (GHG) emissions either directly from fossil fuel and electricity or indirectly from embodied energy of materials. Thus, the objective functions are to minimise: (1) the total cost of rehabilitation including capital and operational costs; (2) the leakage amount; (3) GHG emissions. The Pareto optimal front containing optimal solutions is determined using Non-dominated Sorting Genetic Algorithm NSGA-II. Decision variables in this optimisation problem are classified into a number of groups as: (1) percentage proportion of each rehabilitation technique each year; (2) material types of new pipeline for rehabilitation each year. Rehabilitation techniques used here includes replacement, rehabilitation and lining, cleaning, pipe duplication. The developed model is demonstrated through its application to a Mahalat WDS located in central part of Iran. The rehabilitation strategy is analysed for a 40 year planning horizon. A number of conventional techniques for selecting pipes for rehabilitation are analysed in this study. The results show that the optimal rehabilitation strategy considering GHG emissions is able to successfully save the total expenses, efficiently decrease the leakage amount from the WDS whilst meeting environmental criteria.

Carbon dioxide emissions and international trade at the turn of the millennium

We present a new dataset of geographical production-, final (embodied) production-, and consumption-based carbon dioxide emission inventories, covering 78 regions and 55 sectors from 1997 to 2011. We extend previous work both in terms of time span and in bridging from geographical to embodied production and, ultimately, to consumption. We analyse the recent evolution of emissions, the development of carbon efficiency of the global economy, and the role of international trade. As the distribution of responsibility for emissions across countries is key to the adoption and implementation of international environmental agreements and regulations, the final production- and consumption-based inventories developed here provide a valuable extension to more traditional geographical production-based criteria.

China's inter-regional spillover of carbon emissions and domestic supply chains

In this study, we apply the inter-regional input–output model to explain the relationship between China’s inter-regional spillover of CO2 emissions and domestic supply chains for 2002 and 2007. Based on this model, we propose alternative indicators such as the trade in CO2 emissions, CO2 emissions in trade, regional trade balances, and comparative advantage of CO2 emissions. The empirical results not only reveal the nature and significance of inter-regional environmental spillover within China’s domestic regions but also demonstrate how CO2 emissions are created and distributed across regions via domestic production networks. The main finding shows that a region’s CO2 emissions depend on not only its intra-regional production technique, energy use efficiency but also its position and participation degree in domestic and global supply chains.

Quantity of CO2 Emissions in the Life Cycle of a Highway Infrastructure.

The complexity of climate change and its evolution during the last few years has a positive impact on new developments and approaches to reduce the emissions of CO2. Looking for a methodology to evaluate the sustainability of a roadway, a tool has been developed. Life Cycle Assessment (LCA) is being accepted by the road industry to measure and evaluate the environmental impacts of an infrastructure, as the energy consumption and carbon footprint. This paper describes the methodology to calculate the CO2 emissions associated with the energy embodied on a roadway along its life cycle, including construction, operations and demolition. It will assist to find solutions to improve the energy footprint and reduce the amount of CO2 emissions. Details are provided of both, the methodology and the data acquisition. This paper is an application of the methodology to the Spanish highways, using a local database. Two case studies and a practical example are studied to show the model as a decision support for sustainable construction in the road industry.