Aplicação da técnica eletroanalítica de pulso diferencial usando o eletrodo de carbono vítreo modificado com cisteína para monitorar a degradação eletroquímica de ácido oxálico

In this paper, the technique of differential pulse voltammetry (DPV) has been studied for monitoring the concentration of oxalic acid (OA) during their electrochemical oxidation (EO) in acidic medium using platinum anode supported on titanium (Ti / Pt). The DPV was standardized and optimized using a glassy carbon electrode modified with cysteine. The modification with cysteine was developed electrochemically, forming a polymeric film on the surface of the glassy carbon electrode. The formation of the polymer film was confirmed by analysis of scanning electron microscope and atomic force microscope, confirming the modification of the electrode. The electrochemical degradation was developed using different current densities 10, 20 30 and 40 mA cm -2 electrode with Ti / Pt observing the degradation of oxalic acid, and monitored using the method of KMnO4 titration. However, the analyzes with DPV showed the same behavior elimination of oxalic acid titration. Compared with the titration method classical observed and DPV could be a good fit, confidence limits of detection and confirming the applicability of the technique electroanalytical for monitoring the degradation of oxalic acid

Determinação voltamétrica do nedocromil de sódio utilizando eletrodo de carbono vítreo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comportamento voltamétrico da redução de 2-furfuraldeído em etanol utilizando eletrodo de carbono vítreo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo comparativo de filmes de corantes fenotiazínicos na superfície de eletrodo de carbono vítreo e adsorvidos em titânio fosfatado e suas aplicações eletroanalíticas

Pós-graduação em Ciência dos Materiais - FEIS

Determinação simultânea de ferro e cobre em etanol combustível utilizando eletrodo de nanotubos de carbono modificados

Pós-graduação em Química - IQ

Desenvolvimento de sensor baseado em eletrodo modificado com nanotubos de carbono contendo pentacianonitrosilferratos de metais para determinação de antioxidantes em microemulsão de biodiesel

Pós-graduação em Química - IQ

Remoção de íons Cd2+ de soluções aquosas por eletrodeposição em eletrodos de carbono vítreo reticulado

As soluções aquosas obtidas após o tratamento final de efluentes de processos de eletrodeposição de Cd contém baixas concentrações de íons Cd2+. Neste trabalho determinaram-se as melhores condições para a utilização de eletrodos de carbono vítreo reticulado (CVR) no polimento destas soluções. A eletrodeposição do íon Cd2+ sobre eletrodo de carbono vítreo reticulado de porosidades distintas, 30, 60 e 100 ppi, com e sem recobrimento com polipirrol, foi investigada em soluções aquosas aeradas de ácido sulfúrico e sulfato de potássio em pH 4,8. Sob condições potenciostáticas, uma elevada eficiência de remoção foi obtida para soluções contendo 5 e 10 mg L-1 de íon Cd2+, na faixa de potenciais entre –0,9 e –1,1 V para CVR e em –3,0 V para CVR recoberto com polipirrol (CVR-PPy0). Após cada experimento de eletrodeposição, a diminuição da concentração do íon Cd2+ no eletrólito foi monitorada por voltametria de redissolução anódica. Neste experimenteo, empregando um eletrodo de gota pendente de mercúrio sendo estes resultados comparados com medidas por espectrometria de emissão atômica (ICP). Para o eletrodo de CVR, neste intervalo de potenciais, -0,9 e –1,1 V, a eletrodeposição do íon cádmio é controlada por transporte de massa e a concentração de íons cádmio varia exponencialmente com o tempo, seguindo uma cinética de pseudo primeira ordem. Para a concentração 10 mg L-1 e usando eletrodo de CVR 30 ppi, as eficiências de corrente e de remoção determinadas a -1,1 V após 30 minutos de eletrólise foram, 38 % e 97% , respectivamente. Para eletrodo de CVR 60 ppi foram encontrados 30 % e 99 %, respectivamente. Para o eletrodo de CVR-PPy0 a maior eficiência de remoção encontrada foi de 84% após 90 minutos de eletrólise em –3,0 V, sendo a eficiência de corrente menor do que 2%. A presença de Cd metálico depositado na superfície do eletrodo de CVR e CVR-PPy0 depois da redução em –1,1 V e –3,0 V, respectivamente, foi confirmada por análise de Microscopia Eeletrônica de Varredura (MEV) e espectrometria de energia dispersiva (EDS).

Eletroanálise e oxidação fotoeletrocatalítica dos disruptores endócrinos bisfenol A e nonilfenol sobre eletrodo de nanotubos de 'TI'/'TI''O IND.2' auto-organizados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Investigação eletroquímica e aplicação de eletrodos de carbono vítreo modificados por filmes de poli-L-lisina na determinação de antioxidantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Eletrodos impressos descartáveis e de carbono vítreo modificados com grafeno e compósito de nanotubos de carbono-quitosana aplicados na determinação de corantes de cabelo

Pós-graduação em Química - IQ

Síntese de nanopartículas de prata suportadas sobre nanotubos de carbono de paredes múltiplas para eletrooxidação de benzeno

Silver nanoparticles (Ag) were deposited on multi-walled carbon nanotube by eletroless. The hybrid Ag/MWCNT was used in the modification of glassy carbon electrode (GC) surface. The electrochemical characterization confirmed the presence of Ag in the nanocomposite has been showed that the synthesis was successful. The GC electrode modified with Ag/MWCNT film was evaluated for electro-oxidation of benzene. The electrochemical behavior presented an improvement on the catalytic surface in relation to non-modified GC electrode. The anodic peak current increased the magnitude in three times when compared with the CG electrode modified only with MWCNT

Produção de eletrodos em carbono vítreo monolítico e reticulado a partir da resina furfurílica dopada com cobre

The glassy carbon is a material with a huge technological evolution. Due to its lightness, biocompatibility and their thermal and electrical properties this material finds applications in several industrial fields such as electronics, medical, aerospace and chemical. In order to explore the conductive properties of glassy carbon for use as modified electrodes, the present work aims the processing of monolithic and reticulated glassy carbon with colloidal copper for use in electrochemical applications. First, the best parameters for the cure of furfuryl alcohol resin doped were established through viscosimetry measurements and pressurized differential scanning calorimetry. The analysis of the micrographs of the cured resins show that copper concentrations above 3% weight, generate higher porosity in the material. The characterizations of the monolithic and reticulated glassy carbon resulting from carbonization were performed by scanning electron microscopy (SEM), Raman and Electrochemical impedance spectroscopy, and although it was not possible to detect the presence of copper by SEM, the influence of these particles have been observed by Raman and FT-IR spectra and electrochemical behavior of the material. The decrease in conductivity of monolithic and reticulated glassy carbon in the presence of copper may be related to the defects caused by the presence of copper in the structure of the material.

Determinação de fósforo em biodiesel utilizando eletrodo quimicamente modificado com nanopartículas de ferro

Once petroleum is na exhaustible source of energy, alternative fuels are having more prominence. A much discussed option for replacing fossil fuels is the use of biofuels derived from oils or fats, especially biodiesel. The biodiesel preparation is through a reaction named transesterification, a reaction of triglycerides with a short chain alcohol with a catalyst, producing a mixture of fatty acid esters and glycerol. According to ANP (National Petroleum Agency) specifications, biodiesel can have contaminants due to the catalyst or oil used on its synthesis, such as phosphorus, wich can damage the catalytic converter and cause significant increase in the particles emission. This project aims to develop na alternative method using chemically modified electrodes with iron nanoparticles for determination of phosphorus in biodiesel. For the formation of the iron nanoparticles film on the surface of a glassy carbon electrode, was used a iron sulfate solution. The film was formed after 10 successive cycles, with a scanning speed of 50 mV s-1 and a potential range of -0,9 to -1,25 V. To reduce possible oxides on the surface and activate the electrode, it has been subjected to a cathodic polarization with a potential of -1,25 V for 15 minutes in a sodium hydroxide solution. In cyclic voltammograms obtained in the study of the speed of scanning, there is an increase in the intensity of the anodic and cathodic current peaks. The cathodic peak current varied linearly with the square root of scan rate, showing that the electrode is controlled by diffusion. After successive additions of phosphate there is a linear variation in the current peak in the concentration range of 1,0 x 10-7 a 1,0 x 10-6 mol L-1. To determine if the concentration of phosphorus in real sample, the method of adding standard was used by adding aliquots of phosphate ions in the solution containing soy biodiesel extracted with ....

Modificação de eletrodos de carbono vítreo e nanotubos de Ti/TiO2 com aspirinato de cobre (II) para detecção eletroquímica e redução fotoeletrocatalítica de íons nitrito

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicabilidade da voltametria de pulso diferencial na quantificação de ácido fólico e ácido oxálico: um método comparativo

The development of more selective and sensitive analytical methods is of great importance in different areas of knowledge, covering, for example, food, biotechnological, environmental and pharmaceutical sectors. The study aimed to employ the technique electroanalytical differential pulse voltammetry (DPV) as an innovative and promising alternative for identification and quantification of organic compounds. The organic compounds were investigated in this study oxalic acid (OA) and folic acid (FA). The electrochemical oxidation of oxalic acid has been extensively studied as a model reaction in the boundary between the organic and inorganic electrochemistry. Since the AF, an essential vitamin for cell multiplication in all tissues, which is essential for DNA synthesis. The AF has been investigated using analytical techniques, liquid chromatography and molecular absorption spectrophotometry. The results obtained during the experimental procedure indicated that the process of electrochemical oxidation of oxalic acid is strongly dependent on the nature of the anode material and the oxidation mechanism, which affects their detection. Efficient removal was observed in Ti/PbO2 anodes, graphite, BDD and Pt 90, 85, 80 and 78% respectively. It was also shown that the DPV employing glassy carbon electrode offers a fast, simple, reliable and economical way to determine the AO during the process of electrochemical oxidation. Furthermore, electroanalytical methods are more expensive than commonly used chromatographic analysis and other instrumental methods involving toxic reagents and higher cost. Compared with the classical method of titration and DPV could be a good fit, confidence intervals and detection limits confirming the applicability of electroanalytical technique for monitoring the degradation of oxalic acid. For the study of AF was investigated the electrocatalytic activity of the carbon paste electrode for identification and quantification in pharmaceutical formulations by applying the DPV. The results obtained during the experimental procedure showed an irreversible oxidation peak at 9.1 V characteristic of FA. The carbon paste sensor showed low detection limit of 5.683×10−8 mol L-1 reducing matrix effects. The spectrophotometric analysis showed lower concentrations of HF compared with those obtained by HPLC and DPV. The levels of AF were obtained according to the methodology proposed by the Brazilian Pharmacopoeia. The electroanalytical method (DPV) proposed is cheaper than GC analysis commonly used by the pharmaceutical industry. The results demonstrated the potential of these electroanalytical techniques for future applications in environmental, chemical and biological sensors