Using forecasts to protect Federal facilities in the path of Hurricane Isabel

Hurricane Isabel made landfall as a Category 2 Hurricane on 18 September 2003, on the North Carolina Outer Banks between Cape Lookout and Cape Hatteras, then coursed northwestward through Pamlico Sound and west of Chesapeake Bay where it downgraded to a tropical storm. Wind damage on the west and southwest shores of Pamlico Sound and the western shore of Chesapeake Bay was moderate, but major damage resulted from the storm tide. The NOAA, National Ocean Service, National Centers for Coastal Ocean Sciences, Center for Coastal Fisheries and Habitat Research at Beaufort, North Carolina and the Center for Coastal Environmental Health and Biomedical Research Branch at Oxford, Maryland have hurricane preparedness plans in place. These plans call for tropical storms and hurricanes to be tracked carefully through NOAA National Weather Service (NWS) watches, warnings, and advisories. When a hurricane watch changes to a hurricane warning for the areas of Beaufort or Oxford, documented hurricane preparation plans are activated. Isabel exacted some wind damage at both Beaufort and Oxford. Storm tide caused damage at Oxford, where area-wide flooding isolated the laboratory for many hours. Storm tide also caused damage at Beaufort. Because of their geographic locations on or near the open ocean (Beaufort) or on or near large estuaries (Beaufort and Oxford), storm tide poses a major threat to these NOAA facilities and the safety of federal employees. Damage from storm surge and windblown water depends on the track and intensity of a storm. One tool used to predict storm surge is the Sea, Lake, and Overland Surges from Hurricanes (SLOSH) model of the NWS, which provides valuable surge forecasts that aid in hurricane preparation.

New York, N.Y. and vicinity, 1860 (Raster Image) (Image 2 of 2)

This layer is a georeferenced raster image of the historic paper map entitled: Map of the five cities of New York, Brooklyn, Jersey City, Hoboken & Hudson City : Plate no. 2, prepared by M. Dripps for Valentine's Manuel [sic] of the Corporation of the city of New York. It was published by Common Council in 1860. Scale not given. This layer is image 2 of 2 total images of the two sheet source map, representing the southern portion of the map. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Universal Transverse Mercator (UTM) Zone 18N NAD83 projection. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, city wards, parks, cemeteries, pier and bulkhead lines, selected public buildings, and more. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

New York, N.Y. and vicinity, 1860 (Raster Image) (Image 2 of 2)

This layer is a georeferenced raster image of the historic paper map entitled: Map of the five cities of New York, Brooklyn, Jersey City, Hoboken & Hudson City : Plate no. 1, prepared by M. Dripps for Valentine's Manuel [sic] of the Corporation of the city of New York. It was published by Common Council in 1860. Scale not given. This layer is image 1 of 2 total images of the two sheet source map, representing the northern portion of the map. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Universal Transverse Mercator (UTM) Zone 18N NAD83 projection. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, city wards, parks, cemeteries, pier and bulkhead lines, selected public buildings, and more. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

New York, N.Y. and vicinity, 1899 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: New York City and vicinity, H.M. Wilson, geographer in charge ; triangulation by U.S. Coast and Geodetic Survey ; topography by S.H. Bodfish ... [et al. and] U.S. Coast and Geodetic Survey, N.Y. City Government and the Geological Survey of New Jersey. It was published by U.S.G.S. in 1899. Scale 1:62,500. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Universal Transverse Mercator (UTM) Zone 18N NAD83 projection. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, railroads, drainage, cities and towns, villages, forts, cemeteries, aqueducts, boundaries, and more. Relief is shown with standard contour intervals of 20 feet. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Manhattan, New York, N.Y., 1829 (Raster Image) (Image 1 of 2)

This layer is a georeferenced raster image of the historic paper map entitled: Map of the city and county of New York : with the adjacent country, by David H. Burr. It was published by D.H. Burr for the Atlas of the state of New York, 1829. Scale [ca. 1:20,000]. This layer is image 1 of 2 total images of the two sheet source map, representing the southern portion of the map. Covers Manhattan and adjacent portions of Brooklyn, Queens, and New Jersey. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Universal Transverse Mercator (UTM) Zone 18N NAD83 projection. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, selected public buildings, city wards, ferry lines, wharves, forts and more. Relief is shown by hachures. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Manhattan, New York, N.Y., 1829 (Raster Image) (Image 2 of 2)

This layer is a georeferenced raster image of the historic paper map entitled: Map of the city and county of New York : with the adjacent country, by David H. Burr. It was published by D.H. Burr for the Atlas of the state of New York, 1829. Scale [ca. 1:20,000]. This layer is image 2 of 2 total images of the two sheet source map, representing the northern portion of the map. Covers Manhattan and adjacent portions of Brooklyn, Queens, and New Jersey. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Universal Transverse Mercator (UTM) Zone 18N NAD83 projection. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, selected public buildings, city wards, ferry lines, wharves, forts and more. Relief is shown by hachures. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

New York, N.Y. and vicinity, 1961 : Harlem, N.Y.-N.J. (8 Sheet Set) (Raster Image)

This layer is a georeferenced raster image of the United States Geological Survey 7.5 minute topographic sheet map entitled: New York and vicinity : Harlem, N.Y.-N.J., 1956. It is part of an 8 sheet map set covering the metropolitan New York City area. It was published in 1961. Scale 1:24,000. The source map was compiled from 1:24,000-scale maps of Mount Vernon 1956, Yonkers 1956, Central Park 1956, and Flushing 1955 7.5 minute quadrangles. Hydrography compiled from USC&GS charts 222 (1955), 223 (1954), 748 (1955), 226, 274, 745, 746, and 747 (1956). The image inside the map neatline is georeferenced to the surface of the earth and fit to the Universal Transverse Mercator (UTM) Zone 18N NAD27 projection. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. USGS maps are typical topographic maps portraying both natural and manmade features. They show and name works of nature, such as mountains, valleys, lakes, rivers, vegetation, etc. They also identify the principal works of humans, such as roads, railroads, boundaries, transmission lines, major buildings, etc. Relief is shown with standard contour intervals of 10 and 20 feet; depths are shown with contours and soundings. Please pay close attention to map collar information on projections, spheroid, sources, dates, and keys to grid numbering and other numbers which appear inside the neatline. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Denver and Vicinity, Colorado, 1957 (Raster Image)

This layer is a georeferenced raster image of the historic, topographic paper map entitled: Denver and vicinity, Colorado, 1957. It was published in 1959 by the Geological Survey. Compiled from 1:24,000 scale maps of Sable, Derby, Arvada, Fort Logan, Englewood, Fitzsimons, Parker, Highlands Ranch, and Littleton 1957 7.5 minute quadrangles. The image inside the map neatline is georeferenced to the surface of the earth and fit to the State Plane Colorado Central NAD 1927 coordinate system (in Feet) (Fipszone 0502). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This is a typical topographic map portraying both natural and manmade features. It shows and names works of nature, such as mountains, valleys, lakes, rivers, vegetation, etc. It also identify the principal works of humans, such as roads, railroads, boundaries, transmission lines, major buildings, etc. Relief is shown with standard contour intervals of 10 feet. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Water quality in Rhode River at Smithsonian Institution Pier near Annapolis, Maryland, April 1970 through December 1973 /

Chiefly tables.