Performance characteristics and design recommendations for biomass-burning stoves using earthen construction materials

This report provides an analysis of the thermal performance and emissions characteristics of improved biomass stoves constructed using earthen materials. Commonly referred to as mud stoves, this type of improved stove incorporates high clay content soil with an organic binder in the construction of its combustion chamber and body. When large quantities of the mud material are used to construct the stove body, the stove does not offer significant improvements in fuel economy or air quality relative to traditional open fire cooking. This is partly because a significant amount of heat is absorbed by the mass of the stove reducing combustion efficiency and heat transfer to the cook pot. An analysis of the thermal and mechanical properties of stove materials was also performed. A material mixture containing a one‐to‐one ratio by volume of high content clay soil and straw was found to have thermal properties comparable to fired ceramics used in more advanced improved stove designs. Feedback from mud stove users in Mauritania and Mali, West Africa was also collected during implementation. Suggestions for stove design improvements were developed based on this information and the data collected in the performance, emissions, and material properties analysis. Design suggestions include reducing stove height to accommodate user cooking preferences and limiting overall stove mass to reduce heat loss to the stove body.

From the Humpata Plateau to Namibe Desert, SW Angola

After the Congress, a six-day field trip, will be held through three southwestern provinces of Angola (Huíla, Namibe and Cunene), every day starting and ending in the city of Lubango, for overnight stay in Lubango, with the purpose to observe some of the main sites of geological interest in this zone of Angola. The itinerary of this field trip presents the geologic history of Southwestern Angola and its evolution in the scope of the Congo Craton, through a trip that begins in the first excursion days by the oldest geologic formations and phenomena until the recent geologic formations and phenomena on the last excursion days. On the first and second excursion days, September 5th and September 6th, the field trip will go along the Kunene Anorthosite Complex of Angola (KAC), to observe some petrographic features of the KAC that are important to understand the emplacement of this huge igneous massif of the early Kibarean age. These days of the field trip allow the observation of Earthen Construction, because this region of Cunene is privileged to appreciate a kind of Eco-construction, made of raw earth and in wattle and daub, built with ancient techniques, which constitute a real GeoHeritage. On September 7th, in the morning, the destination will be Tundavala, to visit Tundavala Gap, a huge escarpment of more than 1,000 m high cutted in Neo-Archean and Paleo-Proterozoic igneous rocks, the Ruins of Tundavala (quartzite blocks with sedimentary structures) and Tundavala Waterfalls on a quartzitic scarp. After lunch, the field trip continues towards Humpata plateau to observe the panoramic view over Lubango city from the Statue of Cristo Rei, then the outcrops of dolomitic limestones with stromatolites and dolerites and finally the Leba passage, a huge escarpment and one of the most spectacular parts of the Serra da Chela, traversed by a mountain road built in the early 70s of the last century, that can be observed from the belvedere of the Serra da Chela. On September 8th, the destination is the carbonatite complexes of Tchivira and Bonga, belonging to the Mesozoic alkaline massifs of ultrabasic rocks, a rift valley system that occurs during the Early Cretaceous. In this forth excursion day, due to the huge dimensions of these two carbonatite structures it will be visited, only, the Complex of Bonga, namely the outcrops of the northern part of the structure and secondary deposits on the boundary on the southern part of the of the Complex. The last two excursion days, September 9th and September 10th, are to observe the Cretaceous Basin of Namibe. On September 9th, the northern part of Namibe Basin will be visited to observe the volcanic basic rocks of Namibe as well as the interesting paleontological site of Bentiaba. On September 10th, the destination is the southern and more recent part of Namibe Basin, where on the Namib Desert, the exotic plant Welwitschia mirabilis can be observed, as well as Arco, an oasis in the desert. This last excursion day, ends up at the dunes of Tombwa near the mouth of Curoca river and the beautiful bay of Tombwa, where can be observed heavy minerals in their beach sands.

Indian storage reservoirs with earthen dams: being a practical treatise on their design and construction.

Blank pages for notes included in paging.

Analysis of stability of earthen dams in kachchh region, Gujarat, India

The Kachchh region of Gujarat, India bore the brunt of a disastrous earthquake of magnitude M-w=7.6 that occurred on January 26, 2001. The major cause of failure of various structures including earthen dams was noted to be the presence of liquefiable alluvium in the foundation soil. Results of back-analysis of failures of Chang, Tappar, Kaswati and Rudramata earth dams using pseudo-static limit equilibrium approach presented in this paper confirm that the presence of liquefiable layer contributed to lesser factors of safety leading to a base type of failure that was also observed in the field. Following the earthquake, earth dams have been rehabilitated by the concerned authority and it is imperative that the reconstructed sections of earth dams be reanalyzed. It is also increasingly realized that risk assessment of dams in view of the large-scale investment made and probabilistic analysis is necessary. In this study, it is demonstrated that the probabilistic approach when used in conjunction with deterministic approach helps in providing a rational solution for quantification of safety of the dam and in the estimation of risk associated with the dam construction. (C) 2007 Elsevier B.V. All rights reserved.

Geographical cataloguing of earthen architecture in Soria, Spain

This paper discusses the most relevant earth construction techniques that have been employed in the province of Soria (Spain). The objectives of the research are, first, to locate and catalogue each building techniques with earth within the geographic regions and environmental units and their relation to physical and human environment. Then, the second aim is analyze these techniques and characterize them in terms of material, components and construction processes. Three types are studied: the construction of rammed-earth walls, adobe masonry and timber frame filled with adobe.

Understanding landscape and the values of traditional architecture and construction

Ponencia presentada en el congreso internacional organizado por el Comité Internacional de Arquitectura Vernácula de ICOMOS - UNESCO.

The role of microcomputer-based laboratory display in supporting the construction of new understanding in kinematics

Teachers' failure to utilise MBL activities more widely may be due to not recognising their capacity to transform the nature of laboratory activities to be more consistent with contemporary constructivist theories of learning. This research aimed to increase understanding of how MBL activities specifically designed to be consistent with a constructivist theory of learning support or constrain student construction of understanding. The first author conducted the research with his Year 11 physics class of 29 students. Dyads completed nine tasks relating to kinematics using a Predict-Observe-Explain format. Data sources included video and audio recordings of students and teacher during four 70-minute sessions, students' display graphs and written notes, semi-structured student interviews, and the teacher's journal. The study identifies the actors and describes the patterns of interactions in the MBL. Analysis of students' discourse and actions identified many instances where students' initial understanding of kinematics were mediated in multiple ways. Students invented numerous techniques for manipulating data in the service of their emerging understanding. The findings are presented as eight assertions. Recommendations are made for developing pedagogical strategies incorporating MBL activities which will likely catalyse student construction of understanding.

Skill development for innovative procurement environments in construction

The construction industry should be a priority to all governments because it impacts economically and socially on all citizens. Sector turnover in industrialised economies typically averages 8-12% of GDP. Further, construction is critical to economic growth. Recent Australian studies estimate that a 10% gain in efficiency in construction translates to a 2.5% increase in GDP Inefficiencies in the Australian construction industry have been identified by a number of recent studies modelling the building process. They have identified potential savings in time of between 25% and 40% by reducing non-value added steps in the process. A culture of reform is now emerging in the industry – one in which alternate forms of project delivery are being trialed. Government and industry have identified Alliance Contracting as a means to increase efficiency in the construction industry as part of a new innovative procurement environment. Alliance contracting requires parties to form relationships and work cooperatively to provide a more complete service. This is a significant cultural change for the construction industry, with its well-known adversarial record in traditional contracting. Alliance contracts offer enormous potential benefits, but the Australian construction industry needs to develop new skills to effectively participate in the new relationship environment. This paper describes a collaborative project identifying skill needs for clients and construction professionals to more effectively participate in an increasingly sophisticated international procurement environment. The aim of identifying these skill needs is to assist industry, government, and skill developers to prepare the Australian construction workforce for the future. The collaborating Australian team has been fortunate to secure the Australian National Museum in Canberra as its live case study. The Acton Peninsula Development is the first major building development in the world awarded on the basis of a joint alliance contract.