An RFID-based traceability system

Traceability system in the food supply chain is becoming more necessary. RFID and EPCglobal Network Standards are emerging technologies that bring new opportunities to develop the high performance traceability system. This research proposes the analysis, design, and development of the RFID and EPCglobal Network Standards based traceability system that adheres to the requirements of global food traceability in terms of completeness of traceability information. The additional components, including lot management system and electronic transaction management system, encourage the traditional system in order to fulfill the missing information. The proposed system was developed and applied in a rice supply chain. Results from experimentation showed that the additional components can significantly improve the completeness of traceability information. The collaboration between EPCglobal Network Standards and electronic transaction management system can improve the performances in RFID operations.

Formal network behaviour analysis using model checking

In this research we modelled computer network devices to ensure their communication behaviours meet various network standards. By modelling devices as finite-state machines and examining their properties in a range of configurations, we discovered a flaw in a common network protocol and produced a technique to improve organisations' network security against data theft.

Traceability applications based on Discovery Services

RFID, in its different forms, but especially following EPCglobal standards, has become a key enabling technology for many applications. An essential component to develop track and trace applications in a complex multi-vendor scenario are the Discovery Services. Although they are already envisaged as part of the EPCglobal network architecture, the functional definition and standardization of the Discovery Service is still at a very early stage. Within the scope of the BRIDGE project, a specification for the interfaces of Discovery Services has been developed, together with a prototype to validate the design and different models to enhance supply-chain control through track and trace applications. © 2008 IEEE.

Ypres rally network

Along of this document the reader could find a suitable network design and solution for the Rally Championship of Ypres meeting all the requirements set by the organization of the rally. These requirements have brought many problems in accordance with the network standards, because the area where the boxes are located is pretty large nevertheless technologies to solve those problems are detailed in the project. It has been included different designs in the project, each one of them based on distinct characteristic as they could be efficient, performance… , and the most important, since the organization of the rally is non-profit , the budget. Nevertheless we didn’t dismiss the use of long-lasting devices, as CISCO devices, despite their price. Furthermore a configuration of routing/switching devices has been explained for those who will be commanded to implement this solution. This solution is design to supply internet access as well as video streaming to all boxes for what teams can follow the championship in live time. The maximum connection of internet service provider (ISP) is 160Mbps, this bandwidth has to be distributed for the boxes dynamically. Finally to ensure the network works out it has to be monitored, this is reachable by using network analysis tools which in this project Wireshark has been chosen. RESUMEN. A lo largo de este documento, el lector encontrara un posible diseño y una posible solución para la red local del circuito de Rally celebrado en Ypres, cumpliendo con todos los requisitos y especificaciones establecidos por la organización. Estos requisitos han causado problemas de conformidad con los estándares de la red, debido a que la zona donde se encuentran los Boxes de los equipos es bastante larga, sin embargo las tecnologías para resolver esos problemas se detallan en este proyecto. Se han incluido diferentes diseños, cada uno de ellos centrado en aspectos diferentes así como la eficacia, el rendimiento, el presupuesto, etc... Esta solución está diseñada para suministrar acceso a Internet, así como la transmisión dinámica de video a todos los equipos para que puedan seguir la competición en tiempo real. Finalmente para controlar y asegurar que la red funciona, será monitorizada mediante herramientas de análisis de redes (Wireshark).

Markov modelling of the IEEE 802.11 DCF for real-time applications with periodic traffic

Popular wireless network standards, such as IEEE 802.11/15/16, are increasingly adopted in real-time control systems. However, they are not designed for real-time applications. Therefore, the performance of such wireless networks needs to be carefully evaluated before the systems are implemented and deployed. While efforts have been made to model general wireless networks with completely random traffic generation, there is a lack of theoretical investigations into the modelling of wireless networks with periodic real-time traffic. Considering the widely used IEEE 802.11 standard, with the focus on its distributed coordination function (DCF), for soft-real-time control applications, this paper develops an analytical Markov model to quantitatively evaluate the network quality-of-service (QoS) performance in periodic real-time traffic environments. Performance indices to be evaluated include throughput capacity, transmission delay and packet loss ratio, which are crucial for real-time QoS guarantee in real-time control applications. They are derived under the critical real-time traffic condition, which is formally defined in this paper to characterize the marginal satisfaction of real-time performance constraints.

A conditional retransmission enabled transport protocol for real-time networked control systems

Real-time networked control systems (NCSs) over data networks are being increasingly implemented on a massive scale in industrial applications. Along with this trend, wireless network technologies have been promoted for modern wireless NCSs (WNCSs). However, popular wireless network standards such as IEEE 802.11/15/16 are not designed for real-time communications. Key issues in real-time applications include limited transmission reliability and poor transmission delay performance. Considering the unique features of real-time control systems, this paper develops a conditional retransmission enabled transport protocol (CRETP) to improve the delay performance of the transmission control protocol (TCP) and also the reliability performance of the user datagram protocol (UDP) and its variants. Key features of the CRETP include a connectionless mechanism with acknowledgement (ACK), conditional retransmission and detection of ineffective data packets on the receiver side.

WWW++ - Adding why to what, when and where

RFID technology can be used to its fullest potential only with software to supplement the hardware with powerful capabilities for data capture, filtering, counting and storage. The EPCglobal Network architecture encourages minimizing the amount of business logic embedded in the tags, readers and middleware. This creates the need for a Business Logic Layer above the event filtering layer that enhances basic observation events with business context - i.e. in addition to the (what, when, where) information about an observation, it adds context information about why the object was there. The purpose of this project is to develop an implementation of the Business Logic Layer. This application accepts observation event data (e.g. from the Application Level Events (ALE) standard interface), enriches them with business context and provides these enriched events to a repository of business-level events (e.g. via the EPC Information Services (EPCIS) capture interface). The strength of the application lies in the automatic addition of business context. It is quick and easy to adapt any business process to the framework suggested and equally easy to reconfigure it if the business process is changed. A sample application has been developed for a business scenario in the retail sector.

Integrated Management of Interface Power (IMIP) Framework

La présence importante de plusieurs réseaux sans-fils de différentes portées a encouragée le développement d’une nouvelle génération d’équipements portables sans-fils avec plusieurs interfaces radio. Ainsi, les utilisateurs peuvent bénéficier d’une large possibilité de connectivité aux réseaux sans-fils (e.g. Wi-Fi [1], WiMAX [2], 3G [3]) disponibles autour. Cependant, la batterie d’un nœud mobile à plusieurs interfaces sera rapidement épuisée et le temps d’utilisation de l’équipement sera réduit aussi. Pour prolonger l’utilisation du mobile les standards, des réseaux sans-fils, on définie (individuellement) plusieurs états (émission, réception, sleep, idle, etc.); quand une interface radio n’est pas en mode émission/réception il est en mode sleep/idle où la consommation est très faible, comparée aux modes émission/réception. Pourtant, en cas d’équipement portable à multi-interfaces radio, l’énergie totale consommée par les interfaces en mode idle est très importante. Autrement, un équipement portable équipé de plusieurs interfaces radio augmente sa capacité de connectivité mais réduit sa longévité d’utilisation. Pour surpasser cet inconvénient on propose une plate-forme, qu'on appelle IMIP (Integrated Management of Interface Power), basée sur l’extension du standard MIH (Media Independent Handover) IEEE 802.21 [4]. IMIP permet une meilleure gestion d’énergie des interfaces radio, d’un équipement mobile à multi-radio, lorsque celles-ci entrent en mode idle. Les expérimentations que nous avons exécutées montrent que l’utilisation de IMIP permet d'économiser jusqu'a 80% de l'énergie consommée en comparaison avec les standards existants. En effet, IMIP permet de prolonger la durée d'utilisation d'équipements à plusieurs interfaces grâce à sa gestion efficace de l'énergie.

Desenvolvimento, implementação e testes de um sistema de comunicação sem fio heterogêneo para acesso à serviços: aplicações na telemedicina e domótica

Nos últimos de 20 anos, economia e tecnologia evoluíram em muitas direções e em novas áreas. Muitas dessas evoluções criaram oportunidades que estão sendo consideradas na concepção de futuras redes de comunicação. Estas novas possibilidades estão relacionadas à, sobretudo, utilização da internet para o acesso à serviços e englobam: mobilidade; tecnologias de baixo custo; crescimento e empregos (pela Internet participa-se de cada processo de negócios e produção); serviços; educação (oportunidade para as pessoas crescerem e se desenvolverem); entretenimento (mundos virtuais para o lazer, compras e jogos); volume de tráfego maior (texto, voz, imagens, vídeo). Como uma consequência, a Internet se tornou, semelhante a eletricidade ou água, um bem público. Com quase 2 bilhões de usuários (aproximadamente 28% da população mundial), a Internet está se tornando, cada vez mais, uma infraestrutura difusivo oferecendo em qualquer lugar, a qualquer momento conectividade e serviços. Este mundo da Internet atual é o resultado de sucessivas alterações que aconteceram desde o seu surgimento e que tornaram a infraestrutura de comunicação de importância crítica. Em termos de tecnologias de comunicação, os sistemas móveis sem fio têm um lugar especial devido a sua difusão excepcional na última década e que, junto com a Internet, tem permitido o aparecimento de dispositivos inteligentes, a introdução de novos serviços inovadores e exigindo, para tanto, um ambiente que suporte a inovação e criatividade. Porém, os vários padrões de redes para suporte, principalmente, ao acesso de última milha são desvantagens na perspectiva do usuário, pois este tem de se habilitar nessas redes (contratar os serviços) e, não raro, ter terminais específicos para o acesso. A idéia de um padrão único para estas redes não obteve resultados satisfatórios e uma solução aponta para a integração dessas redes para prover acesso único e transparente ao usuário. Esse trabalho, portanto, apresenta uma solução embarcada para integrar padrões de comunicações sem fio heterogênea do tipo IEEE 802.15.4 ZigBee, IEEE 802.20 GSM/GPRS e IEEE 802.2 Wi-Fi. Essa heterogeneidade de tecnologias sem fio permite a um usuário em movimento, através de seu terminal local ou remoto, acessar aplicativos e serviços de forma transparente. A avaliação de desempenho da solução foi realizada utilizando-se dois tipos de serviços: domótica e telemedicina. Os resultados indicaram que a solução proposta consegue integrar e prover os serviços com segurança e confiabilidade.

Das Internet der Dinge unter dem Aspekt der Selbststeuerung-Ein Überblick

In den letzten Jahren wurde die Vision einer Welt smarter Alltagsgegenstände unter den Begriffen wie Ubiquitous Computing, Pervasive Computing und Ambient Intelligence in der Öffentlichkeit wahrgenommen. Die smarten Gegenstände sollen mit digitaler Logik, Sensorik und der Möglichkeit zur Vernetzung ausgestattet werden. Somit bilden sie ein „Internet der Dinge“, in dem der Computer als eigenständiges Gerät verschwindet und in den Objekten der physischen Welt aufgeht. Während auf der einen Seite die Vision des „Internet der Dinge“ durch die weiter anhaltenden Fortschritte in der Informatik, Mikroelektronik, Kommunikationstechnik und Materialwissenschaft zumindest aus technischer Sicht wahrscheinlich mittelfristig realisiert werden kann, müssen auf der anderen Seite die damit zusammenhängenden ökonomischen, rechtlichen und sozialen Fragen geklärt werden. Zur Weiterentwicklung und Realisierung der Vision des „Internet der Dinge“ wurde erstmals vom AutoID-Center das EPC-Konzept entwickelt, welches auf globale netzbasierte Informationsstandards setzt und heute von EPCglobal weiterentwickelt und umgesetzt wird. Der EPC erlaubt es, umfassende Produktinformationen über das Internet zur Verfügung zu stellen. Die RFID-Technologie stellt dabei die wichtigste Grundlage des „Internet der Dinge“ dar, da sie die Brücke zwischen der physischen Welt der Produkte und der virtuellen Welt der digitalen Daten schlägt. Die Objekte, die mit RFID-Transpondern ausgestattet sind, können miteinander kommunizieren und beispielsweise ihren Weg durch die Prozesskette finden. So können sie dann mit Hilfe der auf den RFID-Transpondern gespeicherten Informationen Förderanlagen oder sonstige Maschinen ohne menschliches Eingreifen selbstständig steuern.

Candida species distribution and antifungal susceptibility testing according to European Committee on Antimicrobial Susceptibility Testing and new vs. old Clinical and Laboratory Standards Institute clinical breakpoints: a 6-year prospective candidaemia survey from the fungal infection network of Switzerland

We analyzed the species distribution of Candida blood isolates (CBIs), prospectively collected between 2004 and 2009 within FUNGINOS, and compared their antifungal susceptibility according to clinical breakpoints defined by the European Committee on Antimicrobial Susceptibility Testing (EUCAST) in 2013, and the Clinical and Laboratory Standards Institute (CLSI) in 2008 (old CLSI breakpoints) and 2012 (new CLSI breakpoints). CBIs were tested for susceptiblity to fluconazole, voriconazole and caspofungin by microtitre broth dilution (Sensititre® YeastOne™ test panel). Of 1090 CBIs, 675 (61.9%) were C. albicans, 191 (17.5%) C. glabrata, 64 (5.9%) C. tropicalis, 59 (5.4%) C. parapsilosis, 33 (3%) C. dubliniensis, 22 (2%) C. krusei and 46 (4.2%) rare Candida species. Independently of the breakpoints applied, C. albicans was almost uniformly (>98%) susceptible to all three antifungal agents. In contrast, the proportions of fluconazole- and voriconazole-susceptible C. tropicalis and F-susceptible C. parapsilosis were lower according to EUCAST/new CLSI breakpoints than to the old CLSI breakpoints. For caspofungin, non-susceptibility occurred mainly in C. krusei (63.3%) and C. glabrata (9.4%). Nine isolates (five C. tropicalis, three C. albicans and one C. parapsilosis) were cross-resistant to azoles according to EUCAST breakpoints, compared with three isolates (two C. albicans and one C. tropicalis) according to new and two (2 C. albicans) according to old CLSI breakpoints. Four species (C. albicans, C. glabrata, C. tropicalis and C. parapsilosis) represented >90% of all CBIs. In vitro resistance to fluconazole, voriconazole and caspofungin was rare among C. albicans, but an increase of non-susceptibile isolates was observed among C. tropicalis/C. parapsilosis for the azoles and C. glabrata/C. krusei for caspofungin according to EUCAST and new CLSI breakpoints compared with old CLSI breakpoints.

Test and evaluation of non conventional instrument transformers and sampled value process bus on Powerlink's transmission network

IEC 61850 Process Bus technology has the potential to improve cost, performance and reliability of substation design. Substantial costs associated with copper wiring (designing, documentation, construction, commissioning and troubleshooting) can be reduced with the application of digital Process Bus technology, especially those based upon international standards. An IEC 61850-9-2 based sampled value Process Bus is an enabling technology for the application of Non-Conventional Instrument Transformers (NCIT). Retaining the output of the NCIT in its native digital form, rather than conversion to an analogue output, allows for improved transient performance, dynamic range, safety, reliability and reduced cost. In this paper we report on a pilot installation using NCITs communicating across a switched Ethernet network using the UCAIug Implementation Guideline for IEC 61850-9-2 (9-2 Light Edition or 9-2LE). This system was commissioned in a 275 kV Line Reactor bay at Powerlink Queensland’s Braemar substation in 2009, with sampled value protection IEDs 'shadowing' the existing protection system. The results of commissioning tests and twelve months of service experience using a Fibre Optic Current Transformer (FOCT) from Smart Digital Optics (SDO) are presented, including the response of the system to fault conditions. A number of remaining issues to be resolved to enable wide-scale deployment of NCITs and IEC 61850-9-2 Process Bus technology are also discussed.

Genesis and role of standards : theoretical foundations and socio-economical model for the construction and use of standards

A key issue for the economic development and for performance of organizations is the existence of standards. As their definitions and control are source of power, it seems to be important to understand the concept and to wonder about the representations authorized by the concept which give their direction and their legitimacy. The difficulties of classical microeconomics of establishing a theory of standardisation compatible with its fundamental axiomatic are underlined. We propose to reconsider the problem by carrying out the opposite way: to question the theoretical base, by reformulating assumptions on the autonomy of the choice of the actors. The theory of conventions will offer us both a theoretical framework and tools, enabling us to understand the systemic dimension and dynamic structure of standards seen as special case of conventions. This work aims thus to provide a sound basis and promote a better consciousness in the development of global project management standards, aiming also to underline that social construction is not a matter of copyright but a matter of open minds, collective cognitive process and freedom for the common wealth.