Electronic structure of the layered ferroelectric perovskite SrBi2Ta2O9

The band structure of the Bi layered perovskite SrBi2Ta2O9 (SBT) has been calculated by the tight binding method. We find both the valence and conduction band edges to consist of states primarily derived from the Bi-O layer rather than the perovskite Sr-Ta-O block. The valence band maximum arises from O p and some Bi s states, while the conduction band minimum consists of Bi p states, with a band gap of 5.1 eV. It is argued that the Bi-O layers largely control the electronic response of SBT while the ferroelectric response originates from the perovskite Sr-Ta-O block. Bi and Ta centered traps are calculated to be shallow, which may account in part for the excellent fatigue properties of SBT.

Electronic structure of the ferroelectric layered perovskite SrBi2Ta2O9

The band structure of the layered perovskite SrBi2Ta2O9 (SBT) was calculated by tight binding and the valence band density of states was measured by x-ray photoemission spectroscopy. We find both the valence and conduction band edges to consist of states primarily derived from the Bi-O layer rather than the perovskite Sr-Ta-O blocks. The valence band maximum arises from O p and some Bi s states, while the conduction band minimum consists of Bi p states, with a wide band gap of 5.1 eV. It is argued that the Bi-O layers largely control the electronic response whereas the ferroelectric response originates mainly from the perovskite Sr-Ta-O block. Bi and Ta centered traps are calculated to be shallow, which may account in part for its excellent fatigue properties. © 1996 American Institute of Physics.

Electronic properties of GaAs, InAs and InP nanowires studied by terahertz spectroscopy.

We have performed a comparative study of ultrafast charge carrier dynamics in a range of III-V nanowires using optical pump-terahertz probe spectroscopy. This versatile technique allows measurement of important parameters for device applications, including carrier lifetimes, surface recombination velocities, carrier mobilities and donor doping levels. GaAs, InAs and InP nanowires of varying diameters were measured. For all samples, the electronic response was dominated by a pronounced surface plasmon mode. Of the three nanowire materials, InAs nanowires exhibited the highest electron mobilities of 6000 cm² V⁻¹ s⁻¹, which highlights their potential for high mobility applications, such as field effect transistors. InP nanowires exhibited the longest carrier lifetimes and the lowest surface recombination velocity of 170 cm s⁻¹. This very low surface recombination velocity makes InP nanowires suitable for applications where carrier lifetime is crucial, such as in photovoltaics. In contrast, the carrier lifetimes in GaAs nanowires were extremely short, of the order of picoseconds, due to the high surface recombination velocity, which was measured as 5.4 × 10⁵ cm s⁻¹. These findings will assist in the choice of nanowires for different applications, and identify the challenges in producing nanowires suitable for future electronic and optoelectronic devices.

Bond-charge calculation of nonlinear optical susceptibilities of LiXO3 type complex crystals

Second order nonlinear optical (NLO) tensor coefficients of LiXO3 (X = I, Nb, Ta) type crystals have been evaluated on the basis of the dielectric theory of complex crystals and the modified bond charge model. The current method is capable of calculating single bond contributions to the total second order NLO susceptibility. The tenser values thus calculated agree well with experimental data. By introducing the subformula equation and the concept of the effective charge of one valence electron, we are able to successfully treat such complex crystals as LiXO3 type compounds. In addition, the bond charge expression is modified to a more reasonable form for complex crystals. (C) 1998 Elsevier Science B.V.

Reformulating time-dependent density functional theory with non-orthogonal localized molecular orbitals.

Time-dependent density functional theory (TDDFT) has broad application in the study of electronic response, excitation and transport. To extend such application to large and complex systems, we develop a reformulation of TDDFT equations in terms of non-orthogonal localized molecular orbitals (NOLMOs). NOLMO is the most localized representation of electronic degrees of freedom and has been used in ground state calculations. In atomic orbital (AO) representation, the sparsity of NOLMO is transferred to the coefficient matrix of molecular orbitals (MOs). Its novel use in TDDFT here leads to a very simple form of time propagation equations which can be solved with linear-scaling effort. We have tested the method for several long-chain saturated and conjugated molecular systems within the self-consistent charge density-functional tight-binding method (SCC-DFTB) and demonstrated its accuracy. This opens up pathways for TDDFT applications to large bio- and nano-systems.

Probing the ultimate limits of plasmonic enhancement.

Metals support surface plasmons at optical wavelengths and have the ability to localize light to subwavelength regions. The field enhancements that occur in these regions set the ultimate limitations on a wide range of nonlinear and quantum optical phenomena. We found that the dominant limiting factor is not the resistive loss of the metal, but rather the intrinsic nonlocality of its dielectric response. A semiclassical model of the electronic response of a metal places strict bounds on the ultimate field enhancement. To demonstrate the accuracy of this model, we studied optical scattering from gold nanoparticles spaced a few angstroms from a gold film. The bounds derived from the models and experiments impose limitations on all nanophotonic systems.

Molecular effects in the ionization of N-2, O-2, and F-2 by intense laser fields

In this paper we study the response in time of N2, O2, and F2 to laser pulses having a wavelength of 390 nm. We find single-ionization suppression in O2 and its absence in F2, in accordance with experimental results at lambda= 800 nm. Within our framework of time-dependent density functional theory we are able to explain deviations from the predictions of intense-field many-body S-matrix theory (IMST). We confirm the connection of ionization suppression with destructive interference of outgoing electron waves from the ionized electron orbital. However, the prediction of ionization suppression, justified within the IMST approach through the symmetry of the highest occupied molecular orbital (HOMO), is not reliable since it turns out that—e.g., in the case of F2—the electronic response to the laser pulse is rather complicated and does not lead to dominant depletion of the HOMO. Therefore, the symmetry of the HOMO is not sufficient to predict ionization suppression. However, at least for F2, the symmetry of the dominantly ionized orbital is consistent with the nonsuppression of ionization.

The role of perceived usefulness and attitude on electronic health record acceptance : an empirical investigation using response surface analysis

Information and communications technologies are a significant component of the healthcare domain and electronic health records play a major role within it. As a result, it is important that they are accepted en masse by healthcare professionals. How healthcare professionals perceive the usefulness of electronic health records and their attitudes towards them have been shown to have significant effects on their overall acceptance. This paper investigates the role of perceived usefulness and attitude on the intention to use electronic health records by future healthcare professionals using polynomial regression with response surface analysis. Results show that the relationship is more complex than predicted in prior research. The paper concludes that the predicting properties of the above determinants must be further investigated to clearly understand their role in predicting the intention to use electronic health records and in designing systems that are better adopted by healthcare professionals of the future.

Response to: Electronic health records and healthcare identifiers : legislation discussion paper

Public submission # 029 to a Australian federal parliamentary committee considering proposed legislative changes to the Commonwealth's Healthcare Identifiers Act 2010 and the Personally Controlled Electronic Health Records Act 2012.

Dual emissive borane-BODIPY dyads: molecular conformation control over electronic properties and fluorescence response towards fluoride ions

Facile synthesis of two new dimesitylboryl appended BODIPYs is reported. The two dyads have similar fluorescent chromophores but differ in their molecular conformations. They exhibit dual fluorescence, intramolecular energy transfer between boryl and BODIPY chromophores and different fluorescence responses (emission enhancement and quenching) upon fluoride binding.

Response Surface Modeling and Optimisation for Reliable Electronic Products

The aim of integrating computational mechanics (FEA and CFD) and optimization tools is to speed up dramatically the design process in different application areas concerning reliability in electronic packaging. Design engineers in the electronics manufacturing sector may use these tools to predict key design parameters and configurations (i.e. material properties, product dimensions, design at PCB level. etc) that will guarantee the required product performance. In this paper a modeling strategy coupling computational mechanics techniques with numerical optimization is presented and demonstrated with two problems. The integrated modeling framework is obtained by coupling the multi-physics analysis tool PHYSICA - with the numerical optimization package - Visua/DOC into a fuJly automated design tool for applications in electronic packaging. Thermo-mechanical simulations of solder creep deformations are presented to predict flip-chip reliability and life-time under thermal cycling. Also a thermal management design based on multi-physics analysis with coupled thermal-flow-stress modeling is discussed. The Response Surface Modeling Approach in conjunction with Design of Experiments statistical tools is demonstrated and used subsequently by the numerical optimization techniques as a part of this modeling framework. Predictions for reliable electronic assemblies are achieved in an efficient and systematic manner.

Methods to increase response to postal and electronic questionnaires

Background: Postal and electronic questionnaires are widely used for data collection in epidemiological studies but non-response reduces the effective sample size and can introduce bias. Finding ways to increase response to postal and electronic questionnaires would improve the quality of health research. Objectives: To identify effective strategies to increase response to postal and electronic questionnaires. Search strategy: We searched 14 electronic databases to February 2008 and manually searched the reference lists of relevant trials and reviews, and all issues of two journals. We contacted the authors of all trials or reviews to ask about unpublished trials. Where necessary, we also contacted authors to confirm methods of allocation used and to clarify results presented. We assessed the eligibility of each trial using pre-defined criteria. Selection criteria: Randomised controlled trials of methods to increase response to postal or electronic questionnaires. Data collection and analysis: We extracted data on the trial participants, the intervention, the number randomised to intervention and comparison groups and allocation concealment. For each strategy, we estimated pooled odds ratios (OR) and 95% confidence intervals (CI) in a random-effects model. We assessed evidence for selection bias using Egger's weighted regression method and Begg's rank correlation test and funnel plot. We assessed heterogeneity among trial odds ratios using a Chi 2 test and the degree of inconsistency between trial results was quantified using the I 2 statistic. Main results: Postal We found 481 eligible trials.The trials evaluated 110 different ways of increasing response to postal questionnaires.We found substantial heterogeneity among trial results in half of the strategies. The odds of response were at least doubled using monetary incentives (odds ratio 1.87; 95% CI 1.73 to 2.04; heterogeneity P < 0.00001, I 2 = 84%), recorded delivery (1.76; 95% CI 1.43 to 2.18; P = 0.0001, I 2 = 71%), a teaser on the envelope - e.g. a comment suggesting to participants that they may benefit if they open it (3.08; 95% CI 1.27 to 7.44) and a more interesting questionnaire topic (2.00; 95% CI 1.32 to 3.04; P = 0.06, I 2 = 80%). The odds of response were substantially higher with pre-notification (1.45; 95% CI 1.29 to 1.63; P < 0.00001, I 2 = 89%), follow-up contact (1.35; 95% CI 1.18 to 1.55; P < 0.00001, I 2 = 76%), unconditional incentives (1.61; 1.36 to 1.89; P < 0.00001, I 2 = 88%), shorter questionnaires (1.64; 95%CI 1.43 to 1.87; P < 0.00001, I 2 = 91%), providing a second copy of the questionnaire at follow up (1.46; 95% CI 1.13 to 1.90; P < 0.00001, I 2 = 82%), mentioning an obligation to respond (1.61; 95% CI 1.16 to 2.22; P = 0.98, I 2 = 0%) and university sponsorship (1.32; 95% CI 1.13 to 1.54; P < 0.00001, I 2 = 83%). The odds of response were also increased with non-monetary incentives (1.15; 95% CI 1.08 to 1.22; P < 0.00001, I 2 = 79%), personalised questionnaires (1.14; 95% CI 1.07 to 1.22; P < 0.00001, I 2 = 63%), use of hand-written addresses (1.25; 95% CI 1.08 to 1.45; P = 0.32, I 2 = 14%), use of stamped return envelopes as opposed to franked return envelopes (1.24; 95% CI 1.14 to 1.35; P < 0.00001, I 2 = 69%), an assurance of confidentiality (1.33; 95% CI 1.24 to 1.42) and first class outward mailing (1.11; 95% CI 1.02 to 1.21; P = 0.78, I 2 = 0%). The odds of response were reduced when the questionnaire included questions of a sensitive nature (0.94; 95% CI 0.88 to 1.00; P = 0.51, I 2 = 0%). Electronic: We found 32 eligible trials. The trials evaluated 27 different ways of increasing response to electronic questionnaires. We found substantial heterogeneity among trial results in half of the strategies. The odds of response were increased by more than a half using non-monetary incentives (1.72; 95% CI 1.09 to 2.72; heterogeneity P < 0.00001, I 2 = 95%), shorter e-questionnaires (1.73; 1.40 to 2.13; P = 0.08, I 2 = 68%), including a statement that others had responded (1.52; 95% CI 1.36 to 1.70), and a more interesting topic (1.85; 95% CI 1.52 to 2.26). The odds of response increased by a third using a lottery with immediate notification of results (1.37; 95% CI 1.13 to 1.65), an offer of survey results (1.36; 95% CI 1.15 to 1.61), and using a white background (1.31; 95% CI 1.10 to 1.56). The odds of response were also increased with personalised e-questionnaires (1.24; 95% CI 1.17 to 1.32; P = 0.07, I 2 = 41%), using a simple header (1.23; 95% CI 1.03 to 1.48), using textual representation of response categories (1.19; 95% CI 1.05 to 1.36), and giving a deadline (1.18; 95% CI 1.03 to 1.34). The odds of response tripled when a picture was included in an e-mail (3.05; 95% CI 1.84 to 5.06; P = 0.27, I 2 = 19%). The odds of response were reduced when "Survey" was mentioned in the e-mail subject line (0.81; 95% CI 0.67 to 0.97; P = 0.33, I 2 = 0%), and when the e-mail included a male signature (0.55; 95% CI 0.38 to 0.80; P = 0.96, I 2 = 0%). Authors' conclusions: Health researchers using postal and electronic questionnaires can increase response using the strategies shown to be effective in this systematic review. Copyright © 2009 The Cochrane Collaboration. Published by John Wiley & Sons, Ltd.


--------------------------------------------------------------------------------

Reaxys Database Information|

--------------------------------------------------------------------------------

Reliability estimation of second life battery system power electronic topologies for grid frequency response applications

This paper is part of a project which aims to research the opportunities for the re-use of batteries after their primary use in low and ultra low carbon vehicles on the electricity grid system. One potential revenue stream is to provide primary/secondary/high frequency response to National Grid through market mechanisms via DNO's or Energy service providers. Some commercial battery energy storage systems (BESS) already exist on the grid system, but these tend to use costly new or high performance batteries. Second life batteries should be available at lower cost than new batteries but reliability becomes an important issue as individual batteries may suffer from degraded performance or failure. Therefore converter topology design could be used to influence the overall system reliability. A detailed reliability calculation of different single phase battery-to-grid converter interfacing schemes is presented. A suitable converter topology for robust and reliable BESS is recommended.