5 resultados para ECOMSED


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Five diagnostic experiments with a 3D baroclinic hydrodynamic and sediment transport model ECOMSED in couple with the third generation wave model SWAN and the Grant-Madsen bottom boundary layer model driven by the monthly sediment load of the Yellow River, were conducted to separately diagnose effects of different hydrodynamic factors on transport of suspended sediment discharged from the Yellow River in the Bohai Sea. Both transport and spatio-temporal distribution of suspended sediment concentration in the Bohai Sea were numerially simulated. It could be concluded that suspended sediment discharged from the Yellow River cannot be delivered in long distance under the condition of tidal current. Almost all of sediments from the Yellow River are deposited outside the delta under the condition of wind-driven current, and only very small of them are transported faraway. On the basis of wind forcing, sediments from the Yellow River are mainly transported north-northwestward, and others which are first delivered to the Laizhou Bay are continuously moved northward. An obvious 3D structure characteristic of sediment transport is produced in the wind-driven and tide-induced residual circulation condition. Transport patterns at all layers are generally consistent with circulation structure, but there is apparent deviation between the depth-averaged sediment flux and the circulation structure. The phase of temporal variation of sediment concentration is consistent with that of the bottom shear stress, both of which are proved to have a ten-day cycle in wave and current condition.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Based on the Estuarine, Coastal and Ocean Modeling System with Sediments (ECOMSED) model, a 3-D hydrodynamic-transport numerical model was established for the offshore area near the Yangtze Estuary in the East China Sea. The hydrodynamic module was driven by tide and wind. Sediment module included sediment resuspension, transport and deposition of cohesive and non-cohesive sediment. The settling of cohesive sediment in the water column was modeled as a function of aggregation (flocculation) and deposition. The numerical results were compared with observation data for August, 2006. It shows that the sediment concentration reduces gradually from the seashore to the offshore area. Numerical results of concentration time series in the observation stations show two peaks and two valleys, according with the observation data. It is mainly affected by tidal current. The suspended sediment concentration is related to the tidal current during a tidal cycle, and the maximum concentration appears 1 h-4 h after the current maximum velocity has reached.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

To study the relationship between sediment transportation and saltwater intrusion in the Changjiang (Yangtze) estuary, a three-dimensional numerical model for temperature, salinity, velocity field, and suspended sediment concentration was established based on the ECOMSED model. Using this model, sediment transportation in the flood season of 2005 was simulated for the Changjiang estuary. A comparison between simulated results and observation data for the tidal level, flow velocity and direction, salinity and suspended sediment concentration indicated that they were consistent in overall. Based on model verification, the simulation of saltwater intrusion and its effect on sediment in the Changjiang estuary was analyzed in detail. The saltwater intrusion in the estuary including the formation, evolution, and disappearance of saltwater wedge and the induced vertical circulation were reproduced, and the crucial impact of the wedge on cohesive and non-cohesive suspended sediment distribution and transportation were successfully simulated. The result shows that near the salinity front, the simulated concentrations of both cohesive and non-cohesive suspended sediment at the surface layer had a strong relationship with the simulated velocity, especially when considering a 1-hour lag. However, in the bottom layer, there was no obvious correlation between them, because the saltwater wedge and its inducing vertical circulation may have resuspended loose sediment on the bed, thus forming a high-concentration area near the bottom even if the velocity near the bottom was very low during the transition phase from flood to ebb.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

本文主要利用ECOMSED模式对长江口及邻近海域的水文、泥沙过程进行三维数值模拟,并结合实测资料分析其水动力、泥沙输运、底床冲淤等特征;然后利用欧拉二相流模型模拟小尺度条件下长江口底床上圆桩周围的水流和泥沙冲刷、输运规律。 通过资料分析和ECOMSED数值模拟结果比较,我们得出:长江口口门内为非正规半日潮流区,潮流运动形式多为往复流,落潮流占优。落潮流速大于涨潮流速,流速垂向分布从表层到底层递减。悬沙浓度与流速关系密切,一般来说,流速越大,悬沙浓度越高;一个潮周期过程中会出现两次、三次或四次泥沙再悬浮,分别是涨急、落急、涨转落、落转涨时刻;盐水楔结构对粘性与非粘性悬沙浓度的分布起决定性作用,转流时泥沙再悬浮主要是由于这时会出现盐水楔,并形成垂向环流,使床面大量未被固结的泥沙再悬浮,形成峰值。悬浮泥沙垂向分布可分为垂线型,斜线型,抛物线型和L型。流场和底床冲淤变化与水深关系密切:深水区,流速较大,底床冲淤变化也较大。其中,受径流影响区表现为淤积,受潮流影响区表现为冲刷;浅水区基本表现为淤积。 从模式运行结果和实测资料比较可以看出,该模型可以较好的模拟长江口水流、悬浮泥沙分布与变化;能够再现在径流入海口处,盐水楔结构及其诱生的垂向环流从形成到发展,又到消失的完整过程;也能够展示底床的冲淤变化。对于我们模拟长江口背景流场,了解该区域内水动力变化、悬浮泥沙输运、底床冲淤等有重要意义。 在欧拉二相流模型对长江口底床上圆桩周围的水流和局部冲刷数值模拟过程中,我们不仅考虑水流和泥沙之间的作用,还引入泥沙颗粒之间的相互影响。模拟结果较合理的展示了圆桩周围的流场类型和底床冲刷变化:在圆桩前方,流速减小并形成垂向涡旋,从而产生局部冲刷;在圆桩两侧,水流加速,挟带上游泥沙向下输送,并在内侧堆积;而在圆桩后面,存在流速分离区。在该分离区内流速很小,并且当流速较大时,会产生回流,形成两个对称的漩涡。流速越大,圆桩前由垂向涡旋引起的局部冲刷就越明显;而当底床泥沙粒径变小时,泥沙临界起动流速变小,底床也更容易被冲刷。悬浮泥沙浓度分布受流场的影响,并且当粒径小而流速大时,能悬浮到更高的深度。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

中国沿岸海域是上升流的多发区. 渤、黄海域,东海陆架区,台湾海峡,以及南海沿岸都存在众多的上升流区. 上升流有利于穿越陆架的物质输运,可以把下层海水中的营养物质带至真光层,促进浮游植物生长,为赤潮爆发提供有利条件. 长江口外和浙江沿岸上升流区连续几年爆发大规模赤潮,该海域已成为我国近海赤潮严重的区域之一. 同时上升流也是该海域海洋渔场形成的重要动力因子. 因此,对长江口外及浙江沿岸上升流的研究具有重要的意义. 本文基于Blumberg等(1996)的ECOMSED模式,对长江口外海区域夏季的上升流现象进行了数值模拟研究. 为了提高对长江口外海区域上升流模拟的准确性和可靠性,模式综合考虑了径流,风应力,环流,热通量和M2,S2,K1,O1四个主要分潮的作用. 本文首先进行控制实验,综合考虑各种动力因子,模拟长江口外南部冷水区的上升流现象,再单独考虑各个动力因子做数值实验,并对各种数值实验结果进行分析对比来研究产生该区域上升流现象的主要原因. 我们设计了3个数值实验:不考虑风应力和热通量、不考虑环流、仅考虑温盐和潮因子. 方便起见,将综合考虑各种动力因子的数值模拟称作控制实验. 各种实验结果的分析表明,长江口外水下河谷的南边(杭州湾口门中心东侧),上升流主要是由向北流动的台湾暖流通过底Ekman效应和陆坡的抬升共同作用产生的. 夏季偏南风对长江口外水下河谷西侧上升流的产生有一定影响,但作用不大. 此外,潮汐潮流对上升流的产生也起着一定的作用,但在本文关注的上升流区潮作用影响不大.