Dynamic force balances for short-duration hypersonic testing facilities

Two force balance techniques for use in hypersonic impulse facilities are compared by measuring the drag force on a 30° semi-apex-angle blunt cone model in a hypersonic shock tunnel at a free stream Mach number of 5.75. An accelerometer-based balance and a stress-wave force balance were tested simultaneously on the same model to measure the drag force. It was found that drag force measurements could be made using both techniques in a flow with a 450-μ s test period. The measured drag forces compared well with the theoretical values estimated using Newtonian theory.

Force-induced globule-coil transition in laminin binding protein and its role for viral-cell membrane fusion.

The specific interactions of the pairs laminin binding protein (LBP)-purified tick-borne encephalitis viral surface protein E and certain recombinant fragments of this protein, as well as West Nile viral surface protein E and certain recombinant fragments of that protein, are studied by combined methods of single-molecule dynamic force spectroscopy (SMDFS), enzyme immunoassay and optical surface waves-based biosensor measurements. The experiments were performed at neutral pH (7.4) and acid pH (5.3) conditions. The data obtained confirm the role of LBP as a cell receptor for two typical viral species of the Flavivirus genus. A comparison of these data with similar data obtained for another cell receptor of this family, namely human αVβ3 integrin, reveals that both these receptors are very important. Studying the specific interaction between the cell receptors in question and specially prepared monoclonal antibodies against them, we could show that both interaction sites involved in the process of virus-cell interaction remain intact at pH 5.3. At the same time, for these acid conditions characteristic for an endosome during flavivirus-cell membrane fusion, SMDFS data reveal the existence of a force-induced (effective already for forces as small as 30-70 pN) sharp globule-coil transition for LBP and LBP-fragments of protein E complexes. We argue that this conformational transformation, being an analog of abrupt first-order phase transition and having similarity with the famous Rayleigh hydrodynamic instability, might be indispensable for the flavivirus-cell membrane fusion process. Copyright © 2014 John Wiley & Sons, Ltd.

Prediction of Soil Properties from the Concepts of Energy Transfer in Dynamic Penetration Tests

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Burden or benefit? Regulation as a dynamic influence on small business performance

This article contributes to contemporary debates concerning the impact of regulation on small business performance. Reassessing previous studies, we build our insights on their useful, but partial, approaches. Prior studies treat regulation principally as a static and negative influence, thereby neglecting the full range of regulatory effects on business performance. This study adopts a more nuanced approach, one informed by critical realism, that conceptualises social reality as stratified, and social causality in terms of the actions of human agents situated within particular social-structural contexts. We theorise regulation as a dynamic force, enabling as well as constraining performance, generating contradictory performance effects. Such regulatory effects flow directly from adaptations to regulation, and indirectly via relationships with the wide range of close and distant stakeholders with whom small businesses interact. Future research should examine these contradictory regulatory influences on small business performance.

Efeitos agudos do alongamento estático no desempenho da força dinâmica em homens jovens

Introdução: O alongamento muscular é frequentemente utilizado nas práticas desportivas, com o objetivo de aumentar a flexibilidade muscular e amplitude articular, assim como diminuir o risco de lesões e melhorar o desempenho atlético. Objetivo: Analisar o efeito agudo do alongamento com diferentes tempos no desempenho da força dinâmica de membros superiores e inferiores em homens jovens. Métodos: Participaram da amostra 14 voluntários do sexo masculino com idade de 23 ± 2 anos, peso corporal de 84 ± 10kg, estatura de178 ± 7cm, IMC de 26 ± 2kg/m2 e percentual de gordura de 11 ± 3%. Eles foram avaliados com o teste de 10RM em três situações distintas: condição sem alongamento (SA), aquecimento especifico seguido do teste de 10-RM; condição com oito minutos de alongamento (AL-8), uma sessão de alongamento estático com oito minutos de duração, seguido do aquecimento e teste de 10RM; e a condição alongamento 16 minutos (AL-16), 16 minutos de alongamento seguidos dos procedimentos descritos anteriormente. Os testes foram feitos no supino reto e leg-press 45º; os alongamentos foram selecionados de forma a atingir as musculaturas solicitadas nos respectivos exercícios. Resultados: Houve redução de 9,2% da força muscular dinâmica de membros superiores em comparação dos grupos SA e AL16, e entre os grupos AL8 e AL16 (p < 0,001). Em membros inferiores essa redução de força (p < 0,001) foi de 4,8% para AL-8 e de 14,3% para AL-16 em comparação com o grupo SA. Conclusão: Sessões de alongamentos estáticos efetuados antes de atividades que envolvam força dinâmica possuem a capacidade de alterar negativamente o desempenho dessa qualidade física, acarretando pior rendimento em longos períodos de alongamento.

Dynamics of Highway Bridges, HR-67, 1961

The AASHO specifications for highway bridges require that in designing a bridge, the live load must be multiplied by an impact factor for which a formula is given, dependent only upon the length of the bridge. This formula is a result of August Wohler's tests on fatigue in metals, in which he determined that metals which are subjected to large alternating loads will ultimately fail at lower stresses than those which are subjected only to continuous static loads. It is felt by some investigators that this present impact factor is not realistic, and it is suggested that a consideration of the increased stress due to vibrations caused by vehicles traversing the span would result in a more realistic impact factor than now exists. Since the current highway program requires a large number of bridges to be built, the need for data on dynamic behavior of bridges is apparent. Much excellent material has already been gathered on the subject, but many questions remain unanswered. This work is designed to investigate further a specific corner of that subject, and it is hoped that some useful light may be shed on the subject. Specifically this study hopes to correlate, by experiment on a small scale test bridge, the upper limits of impact utilizing a stationary, oscillating load to represent axle loads moving past a given point. The experiments were performed on a small scale bridge which is located in the basement of the Iowa Engineering Experiment Station. The bridge is a 25 foot simply supported span, 10 feet wide, supported by four beams with a composite concrete slab. It is assumed that the magnitude of the predominant forcing function is the same as the magnitude of the dynamic force produced by a smoothly rolling load, which has a frequency determined by the passage of axles. The frequency of passage of axles is defined as the speed of the vehicle divided by the axle spacing. Factors affecting the response of the bridge to this forcing function are the bridge stiffness and mass, which determine the natural frequency, and the effects of solid damping due to internal structural energy dissipation.

Kiinnirullaimen dynamiikan ja värähtelyjen simulointi

Diplomityössä tutkittiin kaupallisen monikappaledynamiikkaohjelmiston soveltuvuutta kiinnirullaimen dynamiikan ja värähtelyjen tutkimiseen. Erityisen kiinnostuneita oltiin nipin kuvauksesta sekä nipissä tapahtuvista värähtelyistä. Tässä diplomityössä mallinnettiin kiinnirullaimen ensiö- ja toisiokäytöt sekä tampuuritela. Malli yhdistettiin myöhemmin Metso Paper Järvenpäässä rinnakkaisena diplomityönä tehtyyn malliin, joista muodostui kahteen ratkaisijaan perustuva simulointimalli. Simulointimalli rakennettiin käyttämään kahta erillistä ratkaisijaa, joista toinen on mekaniikkamallin rakentamisessa käytetty ADAMS-ohjelmisto ja toinen säätöjärjestelmää ja hydraulipiirejä kuvaava Simulink-malli. Nipin mallintamiseksi tampuuritela ja rullaussylinteri mallinnettiin joustaviksi käyttäen keskitettyjen massojen menetelmää. Siirtolaitteissa sekä runkorakenteissa tapahtuvat joustot kuvattiin yhden vapausasteen jousi-vaimennin voimilla kuvattuina järjestelminä. Tässä diplomityössä on myös keskitytty esittelemään ADAMS-ohjelmiston toimintaa ohjeistavasti sekä käsittelemään parametrisen mallintamisen etuja. Työssä havaittiin monikappaledynamiikan soveltuvuus kiinnirullaimen dynamiikan sekä dynaamisten voimien aiheuttamien värähtelyjen tutkimiseen. Suoritetuista värähtelymittauksista voitiin tehdä vain arvioita. Mallin havaittiin vaativan lisätutkimusta ja kehitystyötä

Doença do disco intervertebral Hansen tipo II em cães: fisiopatologia, abordagem clínico-cirúrgica e controvérsias

Protrusion of the intervertebral disc can cause chronic progressive compression of the spinal cord, and the neurological associated signs vary according to anatomical location, duration and dynamic force of compression. The type II disc disease is not fully understood, and there are many controversies about is clinical significance and best form of treatment. The most important aspect of conservative treatment is rest and physiotherapy associated with mild exercise, and use of corticosteroids to reduce vasogenic edema. The spinal decompression by surgery for removal of disc material from within the medullary canal is the surgical treatment of choice in type I disc disease, but has technical limitations in the type II disc disease. The purpose of this paper is to review the pathophysiology and treatment of chronic intervertebral disc disease and discuss the controversies in medical treatment and the use of some traditional and new surgical techniques.

Capacidade de força dos membros superiores em competidores de montaria em touros

This study did evaluate the handgrip strength capacity of bull riding practitioners and recreational practitioners in order to obtain parameters of the muscular fitness of subjects undertaken this sports practice. Twenty right-handed subjects were grouped into bull riding athletes (10 individuals at AMT: 174.5 ± 5.2 cm of height, 78.9 ± 12 kg of body weight, 24.7 ± 6.1 years, and 13,8 ± 2.4% for body fat) and non-athletes (10 subjects n-AMR: 178.5 ± 7.3 cm of height, 81.2 ± 8.8kg of body weight, 21.7 ± 2.3 years, and 13.8 ± 1.9% of body fat). They were underwent to protocols of handgrip strength evaluation by a standard and specific dynamometry (simulating a bull riding posture) of right (DPD e DED) e left (DEP e DEE) hands. The dynamic force values from one repetition to maximum test (1RM) were either obtained in conventional load-based system for upper limbs exercises. The values were compared by the test-t for independent data, assuming ρ ≤ 0.05. The relationship between the values of strength from handgrip and dynamic exercises were drawn by Pearson correlation. The results of the AMT to DPD (43.8 ± 6.8kgf), DPE (39.4 ± 7.7kgf), DED (44.9 ± 5.6kgf), and DEE (39.8 ± 8.3kgf). For the n-AMT in DPD (47.0 ± 3.0kgf), DPE (42.2 ± 6.1kgf), DED (49.2 ± 1.5kgf), and DEE (46.2 ± 4.1kgf). Significant difference was observed between DED and DEE. The strength tests of 1RM at bench press (73.2 ± 12.0kg and 82.0 ± 12.0kg), arm-curl (45.2 ± 8.9kg and 43.8 ± 8.9kg), triceps pulley (67.0 ± 6.3kg and 72.0 ± 6.3kg), and pulley (73.5 ± 8.5kg and 73.7 ± 7.5kg) for groups n-AMT and AMT did not showed differences. Correlations were showed between all handgrip tests and elbow flexor force for AMT, and between DPD and elbow extensor, abductor, adductor and extensor of shoulder for n-AMT. influences to the performance of the force dynamometry. It could be concluded that handgrip force and dynamic strength of upper limbs did not were putative responses for bull riding practice.

Interpretação racional do ensaio DPL

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Substrate binding tunes conformational flexibility and kinetic stability of an amino acid antiporter

We used single molecule dynamic force spectroscopy to unfold individual serine/threonine antiporters SteT from Bacillus subtilis. The unfolding force patterns revealed interactions and energy barriers that stabilized structural segments of SteT. Substrate binding did not establish strong localized interactions but appeared to be facilitated by the formation of weak interactions with several structural segments. Upon substrate binding, all energy barriers of the antiporter changed thereby describing the transition from brittle mechanical properties of SteT in the unbound state to structurally flexible conformations in the substrate-bound state. The lifetime of the unbound state was much shorter than that of the substrate-bound state. This leads to the conclusion that the unbound state of SteT shows a reduced conformational flexibility to facilitate specific substrate binding and a reduced kinetic stability to enable rapid switching to the bound state. In contrast, the bound state of SteT showed an increased conformational flexibility and kinetic stability such as required to enable transport of substrate across the cell membrane. This result supports the working model of antiporters in which alternate substrate access from one to the other membrane surface occurs in the substrate-bound state.

A sensorless virtual slave control scheme for kinematically dissimilar master-slave teleoperation

The use of telerobotic systems is essential for remote handling (RH) operations in radioactive areas of scientific facilities that generate high doses of radiation. Recent developments in remote handling technology has seen a great deal of effort being directed towards the design of modular remote handling control rooms equipped with a standard master arm which will be used to separately control a range of different slave devices. This application thus requires a kinematically dissimilar master-slave control scheme. In order to avoid drag and other effects such as friction or other non-linear and unmodelled slave arm effects of the common position-position architecture in nonbackdrivable slaves, this research has implemented a force-position control scheme. End-effector force is derived from motor torque values which, to avoid the use of radiation intolerant and costly sensing devices, are inferred from motor current measurement. This has been demonstrated on a 1-DOF test-rig with a permanent magnet synchronous motor teleoperated by a Sensable Phantom Omni® haptic master. This has been shown to allow accurate control while realistically conveying dynamic force information back to the operator.

Realization of Sinusoidal Forces at CEM

This paper describes the procedure implemented at CEM for dynamic force calibration using sinusoidal excitations of force transducers. The method is based on a sinusoidal excitation of force transducers equipped with an additional top mass excited with an electrodynamic shaker system. The acceleration is measured by means of a laser vibrometer.

Highly demanding resistive vibration exercise program is tolerated during 56 days of strict bed-rest

Several studies have tried to find countermeasures against musculoskeletal de-conditioning during bed-rest, but none of them yielded decisive results. We hypothesised that resistive vibration exercise (RVE) might be a suitable training modality. We have therefore carried out a bed-rest study to evaluate its feasibility and efficacy during 56 days of bed-rest. Twenty healthy male volunteers aged 24 to 43 years were recruited and, after medical check-ups, randomised to a non-exercising control (Ctrl) group or a group that performed RVE 11 times per week. Strict bed-rest was controlled by video surveillance. The diet was controlled. RVE was performed in supine position, with a static force component of about twice the body weight and a smaller dynamic force component. RVE comprised four different units (squats, heel raises, toe raises, kicks), each of which lasted 60 - 100 seconds. Pre and post exercise levels of lactate were measured once weekly. Body weight was measured daily on a bed scale. Pain questionnaires were obtained in regular intervals during and after the bed-rest. Vibration frequency was set to 19 Hz at the beginning and progressed to 25.9 Hz (SD 1.9) at the end of the study, suggesting that the dynamic force component increased by 90%. The maximum sustainable exercise time for squat exercise increased from 86 s (SD 21) on day 11 of the BR to 176 s (SD 73) on day 53 (p = 0.006). On the same days, post-exercise lactate levels increased from 6.9 mmol/l (SD2.3) to 9.2 mmol/l (SD 3.5, p = 0.01). On average, body weight was unchanged in both groups during bed-rest, but single individuals in both groups depicted significant weight changes ranging from -10% to + d10% (p < 0.001). Lower limb pain was more frequent during bed-rest in the RVE subjects than in Ctrl (p = 0.035). During early recovery, subjects of both groups suffered from muscle pain to a comparable extent, but foot pain was more common in Ctrl than in RVE (p = 0.013 for plantar pain, p = 0.074 for dorsal foot pain). Our results indicate that RVE is feasible twice daily during bed-rest in young healthy males, provided that one afternoon and one entire day per week are free. Exercise progression, mainly by progression of vibration frequency, yielded increases in maximum sustainable exercise time and blood lactate. In conclusion, RVE as performed in this study, appears to be safe.

Minority influence and innovation:antecedents, processes and consequences

Social groups form an important part of our daily lives. Within these groups pressures exist which encourage the individual to comply with the group’s viewpoint. This influence, which creates social conformity, is known as ‘majority influence’ and is the dominant process of social control. However, there also exists a ‘minority influence’, which emerges from a small subsection of the group and is a dynamic force for social change. Minority Influence and Innovation seeks to identify the conditions under which minority influence can prevail, to change established norms, stimulate original thinking and help us to see the world in new ways. With chapters written by a range of expert contributors, areas of discussion include: •processes and theoretical issues •the factors which affect majority and minority influence •interactions between majority and minority group members This book offers a thorough evaluation of the most important current developments within this field and presents consideration of the issues that will be at the forefront of future research. As such it will be of interest to theorists and practitioners working in social psychology. This book offers a thorough evaluation of the most important current developments within this field and presents consideration of the issues that will be at the forefront of future research. As such it will be of interest to theorists and practitioners working in social psychology.