Caracterização do meio físico como subsídio à elaboração de cartas de sensibilidade ambiental: ensaio de aplicação em dutovia na Serra do Mar - SP

Pós-graduação em Geociências e Meio Ambiente - IGCE

Mapeamento geoambiental como subsídio na determinação de áreas de instabilidades da faixa de dutos Osvat/Osplan - São Sebastião, SP

Works of linear engineering such as roads, pipelines and transmission lines have specific mapping due to their large scale impact on the environment, thus requiring mapping methods that are both efficient and of low cost. This paper presents a proposal of Geoenvironmental mapping for works linear. The work chosen for the implementation of the method was the Osvat/Osplan pipeline located in the cities of São Sebastião and Caraguatatuba. The geoenvironment mapping was elaborate trough photo-interpretation of images of the ETM+/Landsat-7 sensor and analysis of the drainage network, thus resulting in the partitioning of the geoenvironmental units and the fracture area (structural lineaments and lines of strikes), these maps were subsequently integrated into a product called Map of environmental susceptibility to gravitational and erosive processes, which helped define the areas with potential geotechnical problems that could damage both the pipeline and the environment.

Desenvolvimento de uma ferramenta personalizada em sistema de informações geográficas, para identificar áreas de risco a inundação em obras lineares: uma aplicação prática em dutovias

Pós-graduação em Geociências e Meio Ambiente - IGCE

Caracterização gfeológico-geotécnica aplicada a gestão de risco no gasoduto GASBOL, trecho Ipeúna/SP - Itirapina/SP

The pipelines are characterized by the great length and linearity, these enterprises are usually associated with the horizon of soil and decomposed rock and accidents in this system usually have high complexity. So this work proposes a study of geological and geotechnical characterization of approximately 40 km ² and a study of risk analysis along 18.3 km of gas pipeline GASBOL, in the municipalities of Ipeúna-SP and Itirapina-SP, in scale 1:25.000, besides correlation between studies. The method for geological and geotechnical characterization is based on physiographic integrated analysis technique, which is supported by literature research, observation and interpretation of satellite imagery (photointerpretation), correlation of products numerical model of ground, fieldwork. The method adopted for risk classification is based on preliminary analysis of hazards (APP) technique, which is identified the geological process, this feature is classified as the susceptibility of occurrence, and then classified as the possible consequence of the process, if this evolves. As a product of the research, we designed a map in 1:25,000 scale, containing a table of geological and geotechnical characteristics of the mapped drives, as well as sectorization risk in each section of the pipeline. Were mapped geological and geotechnical seven units in the study area, delimited in excerpts of which five are classified as high risk, totaling 1.1 km in length of 18.3 km total

Dutovias: aspectos gerais e a questão ambiental na definição de trajetos terrestres

Taking into account the consistent and important expansion of the Brazilian oil and gas pipelines network in the last years, this work discusses how these lines are planned regarding the continental environmental context. Its central objective is to show how studies to select alternative lines are made before a gas or oil pipeline is installed. These studies help to choose routes in which the environment is less affected by the pipeline, and use specific methods, technologies, and tools. Bibliographical studies combined with interviews and discussions with experts of the oil and gas sector were used to support this monograph.

Uso do modelo de simulação 'ABC 6' para avaliação de áreas sujeitas à ocorrência de ondas de cheia e corridas de massa/detritos: estudo de caso na bacia do Ribeirão da Prata (SP)

Pipelines are linear engineering works, designed mostly for transporting oil and its derivatives for long distances, furnishing even the farthermost zones of the country. Due to oil sector needs to ensure for the safety and conservation of its properties, several geotechnical studies are being held at the pipelines field, in order to preserve this important transportation, and also to prevent accidents, which might seriously compromise the environment and the population who lives around it. The OSBRA pipeline, who connects the city of Paulínia to the capital Brasília, is one of these engineering works that deserves to be pointed out. This research, performed at the Ribeirão da Prata Basin, was a pilot study conducted with the main objective of testing the current methodology efficiency, for future applications in the closest watersheds to the OSBRA pipeline. The objective of this research is to analyze flood wave and debris flow processes in a non-fictional watershed, by comparing two different kinds of methods: the first one based on simulation models (software ‘ABC 6’), and the other one by flood wave and debris flow susceptibility mapping. The results from the hydrological modeling were both hydrographs and ietographs that estimated values of outputs and infiltration. To construct the susceptibility maps were necessary three other maps: ground use and occupation maps, divided according to the different protection degrees that were offered to the ground; maps of dam locations in the area and physiographic compartimentation maps, divided according to the local geology. To complete the methodology, the results were collected from both methods for comparison. The obtained product for this methodology was series of data whose different susceptibility degrees to flood wave and debris flow could define the safest route for a pipeline crossing in this watershed...

Proposta de traçado de alcoolduto ligando a hidrovia Tietê Paraná à refinaria do planalto paulista com uso de avaliação multicritérios e geotecnologias

From the beginning of the century, with the advent of the flex fuel car, successor fluctuations in oil prices and the rise of awareness of the impending shortage of fossil fuels, the alcohol sector begins to reappear in the panorama of national economy making Brasill reaches the point of becoming a leading exporter of this product. Ethanol assumed the role of such importance in Brazilian exports, which Petrobras through the Growth Acceleration Program (PAC) has made investments in the Brazilian pipeline network to better ensure the production of ethanol to major ports. The means of transport in pipelines are safe and inexpensive, but require careful evaluation in its implementation, they may lead to negative social and environmental impacts. Thus, the purpose of this project is to propose the best route for an ethanol pipeline connectin the Tietê-Paraná, leaving the municipality of Santa Maria da Serra (SP), to the Planalto Paulista Refinery (REPLAN), located in Paulinia (SP), belonging to the passage of ethanol export corridor, currently under revelopment. The technique used for the development of the stroke is the association of multicriteria evaluation, the geographical information system (SIG) and geotechnologies. This study presented three possible layouts for the ethanol pipeline, highlighting the best option, in addition, demonstrated the suitability of the area to receive projects of similar nature to a pipeline

Fases de investigação geológico-geotécnica para a implantação de dutovias

The research addresses the need for detailed geological and geotechnical investigations in pipeline’s design, given the diversity of geological units crossed by these works along its layout, which often extends for hundreds of miles. For its large size, this type of work often goes through different states and regions with very different characteristics in terms of topography, vegetation, geology and geotechnical conditions. For a better use of these investigations in order to avoid unnecessary costs and inefficient results, some authors recommend that steps be taken to study, seeking a progressive detail of the pipeline’s implantation area. The main objective of the study is to describe, analyze and correlate the proposals for geological and geotechnical’s investigation recommended by the authors selected. Nogueira Junior & Marques (1998) suggest that for better effectiveness of geological and geotechnical investigations associated with the deployment of pipelines, different research methods are applied sequentially in five major stages of the building. Rocha et al (2008) recommend that, for the pipeline’s implantation using horizontal directional drilling, investigations are performed in three phases of study, to be developed in coordination with the project stages. For Gelinas & Mathy (2004), when time and budget constraints permit, geotechnical investigations for directional drilling projects for pipelines must be made in four sequential phases. Heinz (2008) suggests that the geotechnical investigations for pipeline’s implantation using horizontal directional drilling at crossings of water bodies are carried out in three successive stages. By the development of research, we could see that all the different proposals recommend studies in sequential phases, starting from a more general scale for a more specific, seeking a progressive understanding of the geological model of the area where you intend to deploy the pipeline

Diretrizes para execução dos estudos geológico-geotécnicos e ambientais voltados à implantação de dutovias

Due to the new discoveries of oil and gas reservoirs, and also the increasing production of bio-fuels, the brazilian general pipeline system is being vertiginously extended. On the other hand, there is a lack of clear parameters that would allow a better utilization of the geological-geotechnical studies in the process of environmental licensing of pipeline systems. Therefore, this paper presents guidelines that would orientate the environmental licensing procedures to build pipeline systems, and also the geological-geotechnical studies that would support the characterization of the physical context. The method applied in this study consisted in the existing data survey and in their organization, analysis and review. In doing so, there is a well-subsidy integration of the many steps of the pipeline system implementation, the required environmental licenses and the investigation methods of the correlated physical context. As a result, it’s presented a flowchart of the guidelines, detailing the interaction between the environmental licensing, the geological-geotechnical studies and the phases of the pipeline’s project.

Tenacidade ao impacto e resistência a fadiga de aço API 5L X70 modificado ao Nb

O transporte de gás e derivados de petróleo é realizado pelo uso de tubulações, denominadas de oleodutos ou gasodutos, que necessitam de elevados níveis de resistência mecânica e corrosão, aliadas a uma boa tenacidade à fratura e resistência à fadiga. A adição de elementos de liga nesses aços, Ti, V e Nb entre outros, é realizada para o atendimento destes níveis de resistência após o processamento termomecânico das chapas para fabricação destes dutos, utilizando-se a norma API 5L do American Petroleum Institute, API, para a classificação destes aços. A adição de elementos de liga em associação com o processamento termomecânico visa o refino de grão da microestrutura austenítica, o qual é transferido para a estrutura ferrítica resultante. O Brasil é o detentor das maiores reservas mundiais de nióbio, que tem sido apresentado como refinador da microestrutura mais eficiente que outros elementos, como o V e Ti. Neste trabalho dois aços, denominados Normal e Alto Nb foram estudados. A norma API propõe que a soma das concentrações de Nióbio, Vanádio e Titânio devem ser menores que 0,15% no aço. As concentrações no aço contendo mais alto Nb é de 0,107%, contra 0,082% do aço de composição normal, ou seja, ambos atendem o valor especificado pela norma API. Entretanto, os aços são destinados ao uso em dutovias pela PETROBRÁS que impõe limites nos elementos microligantes para os aços aplicados em dutovias. Deste modo estudos foram desenvolvidos para verificar se os parâmetros de resistência à tração, ductilidade, tenacidade ao impacto e resistência à propagação de trinca por fadiga, estariam em acordo com a norma API 5L grau X70 e com os resultados que outros pesquisadores têm encontrado para aços dessa classe. Ainda, como para a formação de uma dutovia os tubos são unidos uns aos outros por processo de soldagem (circunferencial), o estudo de fadiga foi estendido para as regiões da solda e zona termicamente afetada (ZTA). Como conclusão final observa-se que o aço API 5L X70 com Nb modificado, produzido conforme processo desenvolvido pela ArcelorMittal - Tubarão, apresenta os parâmetros de resistência e ductilidade em tração, resistência ao impacto e resistência a propagação de trinca em fadiga (PTF) similar aos aços API 5L X70 com teores de Nb = 0,06 % peso e aqueles da literatura com teores de Nb+Ti+V < 0,15% peso. O metal base, metal de solda e zona termicamente afetada apresentaram curvas da/dN x ΔK similares, com os parâmetros do material C e m, da equação de Paris, respectivamente na faixa de 3,3 - 4,2 e 1.3x10-10 - 5.0x10-10 [(mm/ciclo)/(MPa.m1/2)m].