CFD analysis of pneumatic conveying in a double-tube-socket (DTS (R)) pipe

A pipeline with a bypass is widely used for the pneumatic conveying of material. The double-tube-socket (DTS (R)) technology, which uses a special inner bypass, represents the current state of the art. Here, a new methodology is proposed based on the use of computational fluid dynamics (CFD) to predict the energy consumption of DTS conveying. The predicted results are in good agreement with those from pilot-scale experiments. (C) 2010 Elsevier Inc. All rights reserved.

NEW METHODOLOGY FOR THE ESTIMATION OF ENERGY CONSUMPTION IN A DOUBLE-TUBE-SOCKET (DTS (R)) PNEUMATIC CONVEYING

A new methodology based on the use of CFD is proposed to estimate the energy consumptions in a DTS (DOUBLE-TUBE-SOCKET) pneumatic conveying. A simple computational program based on this methodology is developed. It can directly give the lowest energy consumption and the compatible gas consumption by only input the distance of conveying and the conveying tonnage. This computational program has been validated through our experimental work.

Shrinking neighborhood evolution : a novel stochastic algorithm for numerical optimization

Focusing on the conditions that an optimization problem may comply with, the so-called convergence conditions have been proposed and sequentially a stochastic optimization algorithm named as DSZ algorithm is presented in order to deal with both unconstrained and constrained optimizations. The principle is discussed in the theoretical model of DSZ algorithm, from which we present the practical model of DSZ algorithm. Practical model efficiency is demonstrated by the comparison with the similar algorithms such as Enhanced simulated annealing (ESA), Monte Carlo simulated annealing (MCS), Sniffer Global Optimization (SGO), Directed Tabu Search (DTS), and Genetic Algorithm (GA), using a set of well-known unconstrained and constrained optimization test cases. Meanwhile, further attention goes to the strategies how to optimize the high-dimensional unconstrained problem using DSZ algorithm.

Flexible high voltage pulsed power supply for plasma applications

Demands for delivering high instantaneous power in a compressed form (pulse shape) have widely increased during recent decades. The flexible shapes with variable pulse specifications offered by pulsed power have made it a practical and effective supply method for an extensive range of applications. In particular, the release of basic subatomic particles (i.e. electron, proton and neutron) in an atom (ionization process) and the synthesizing of molecules to form ions or other molecules are among those reactions that necessitate large amount of instantaneous power. In addition to the decomposition process, there have recently been requests for pulsed power in other areas such as in the combination of molecules (i.e. fusion, material joining), gessoes radiations (i.e. electron beams, laser, and radar), explosions (i.e. concrete recycling), wastewater, exhausted gas, and material surface treatments. These pulses are widely employed in the silent discharge process in all types of materials (including gas, fluid and solid); in some cases, to form the plasma and consequently accelerate the associated process. Due to this fast growing demand for pulsed power in industrial and environmental applications, the exigency of having more efficient and flexible pulse modulators is now receiving greater consideration. Sensitive applications, such as plasma fusion and laser guns also require more precisely produced repetitive pulses with a higher quality. Many research studies are being conducted in different areas that need a flexible pulse modulator to vary pulse features to investigate the influence of these variations on the application. In addition, there is the need to prevent the waste of a considerable amount of energy caused by the arc phenomena that frequently occur after the plasma process. The control over power flow during the supply process is a critical skill that enables the pulse supply to halt the supply process at any stage. Different pulse modulators which utilise different accumulation techniques including Marx Generators (MG), Magnetic Pulse Compressors (MPC), Pulse Forming Networks (PFN) and Multistage Blumlein Lines (MBL) are currently employed to supply a wide range of applications. Gas/Magnetic switching technologies (such as spark gap and hydrogen thyratron) have conventionally been used as switching devices in pulse modulator structures because of their high voltage ratings and considerably low rising times. However, they also suffer from serious drawbacks such as, their low efficiency, reliability and repetition rate, and also their short life span. Being bulky, heavy and expensive are the other disadvantages associated with these devices. Recently developed solid-state switching technology is an appropriate substitution for these switching devices due to the benefits they bring to the pulse supplies. Besides being compact, efficient, reasonable and reliable, and having a long life span, their high frequency switching skill allows repetitive operation of pulsed power supply. The main concerns in using solid-state transistors are the voltage rating and the rising time of available switches that, in some cases, cannot satisfy the application’s requirements. However, there are several power electronics configurations and techniques that make solid-state utilisation feasible for high voltage pulse generation. Therefore, the design and development of novel methods and topologies with higher efficiency and flexibility for pulsed power generators have been considered as the main scope of this research work. This aim is pursued through several innovative proposals that can be classified under the following two principal objectives. • To innovate and develop novel solid-state based topologies for pulsed power generation • To improve available technologies that have the potential to accommodate solid-state technology by revising, reconfiguring and adjusting their structure and control algorithms. The quest to distinguish novel topologies for a proper pulsed power production was begun with a deep and through review of conventional pulse generators and useful power electronics topologies. As a result of this study, it appears that efficiency and flexibility are the most significant demands of plasma applications that have not been met by state-of-the-art methods. Many solid-state based configurations were considered and simulated in order to evaluate their potential to be utilised in the pulsed power area. Parts of this literature review are documented in Chapter 1 of this thesis. Current source topologies demonstrate valuable advantages in supplying the loads with capacitive characteristics such as plasma applications. To investigate the influence of switching transients associated with solid-state devices on rise time of pulses, simulation based studies have been undertaken. A variable current source is considered to pump different current levels to a capacitive load, and it was evident that dissimilar dv/dts are produced at the output. Thereby, transient effects on pulse rising time are denied regarding the evidence acquired from this examination. A detailed report of this study is given in Chapter 6 of this thesis. This study inspired the design of a solid-state based topology that take advantage of both current and voltage sources. A series of switch-resistor-capacitor units at the output splits the produced voltage to lower levels, so it can be shared by the switches. A smart but complicated switching strategy is also designed to discharge the residual energy after each supply cycle. To prevent reverse power flow and to reduce the complexity of the control algorithm in this system, the resistors in common paths of units are substituted with diode rectifiers (switch-diode-capacitor). This modification not only gives the feasibility of stopping the load supply process to the supplier at any stage (and consequently saving energy), but also enables the converter to operate in a two-stroke mode with asymmetrical capacitors. The components’ determination and exchanging energy calculations are accomplished with respect to application specifications and demands. Both topologies were simply modelled and simulation studies have been carried out with the simplified models. Experimental assessments were also executed on implemented hardware and the approaches verified the initial analysis. Reports on details of both converters are thoroughly discussed in Chapters 2 and 3 of the thesis. Conventional MGs have been recently modified to use solid-state transistors (i.e. Insulated gate bipolar transistors) instead of magnetic/gas switching devices. Resistive insulators previously used in their structures are substituted by diode rectifiers to adjust MGs for a proper voltage sharing. However, despite utilizing solid-state technology in MGs configurations, further design and control amendments can still be made to achieve an improved performance with fewer components. Considering a number of charging techniques, resonant phenomenon is adopted in a proposal to charge the capacitors. In addition to charging the capacitors at twice the input voltage, triggering switches at the moment at which the conducted current through switches is zero significantly reduces the switching losses. Another configuration is also introduced in this research for Marx topology based on commutation circuits that use a current source to charge the capacitors. According to this design, diode-capacitor units, each including two Marx stages, are connected in cascade through solid-state devices and aggregate the voltages across the capacitors to produce a high voltage pulse. The polarity of voltage across one capacitor in each unit is reversed in an intermediate mode by connecting the commutation circuit to the capacitor. The insulation of input side from load side is provided in this topology by disconnecting the load from the current source during the supply process. Furthermore, the number of required fast switching devices in both designs is reduced to half of the number used in a conventional MG; they are replaced with slower switches (such as Thyristors) that need simpler driving modules. In addition, the contributing switches in discharging paths are decreased to half; this decrease leads to a reduction in conduction losses. Associated models are simulated, and hardware tests are performed to verify the validity of proposed topologies. Chapters 4, 5 and 7 of the thesis present all relevant analysis and approaches according to these topologies.

The effect of lumbar support on the trunk muscle activity and pelvic tilt in a passenger vehicle car seat

In order to gain a competitive edge in the market, automotive manufacturers and automotive seat suppliers have identified seat ergonomics for further development to improve overall vehicle comfort. Adjustable lumbar support devices have been offered since long as comfort systems in either a 2-way or 4-way adjustable configuration, although their effect on lumbar strain is not well documented. The effect of a lumbar support on posture and muscular strain, and therefore the relationship between discomfort and comfort device parameter settings, requires clarification. The aim of this paper is to study the effect of a 4-way lumbar support on lower trunk and pelvis muscle activity, pelvic tilt and spine curvature during a car seating activity. 10 healthy subjects (5 m/f; age 19-39) performed a seating activity in a passenger vehicle with seven different static lumbar support positions. The lumbar support was tested in 3 different height positions in relation to the seatback surface centreline (high, centre, low), each having 2 depths positions (lumbar prominence). An extra depth position was added for the centre position. Posture data were collected using a VICON MX motion capture system and NORAXON DTS goniometers and inclinometer. A rigid-body model of an adjustable car seat with four-way adjustable lumbar support was constructed in UGS Siemens NX and connected to a musculoskeletal model of a seated-human, modelled in AnyBody. Wireless electromyography (EMG) was used to calibrate the musculoskeletal model and assess the relationship between (a) muscular strain and lumbar prominence (normal to seatback surface) respective to the lumbar height (alongside seatback surface), (b) hip joint moment and lumbar prominence (normal to seatback surface) respective to lumbar height (alongside seatback surface) and (c) pelvic tilt and lumbar prominence (normal to seatback surface) respective to the lumbar height (alongside seatback surface). This study was based on the assumption that the musculoskeletal human model was seated at the correct R-Point (SgRP), determined via the occupant packaging toolkit in the JACK digital human model. The effect of the interaction between the driver/car-seat has been investigated for factors resulting from the presence and adjustment of a 4-way lumbar support. The results obtained show that various seat adjustments, and driver’s lumbar supports can have complex influence on the muscle activation, joint forces and moments, all of which can affect the comfort perception of the driver. This study enables the automotive industry to optimise passenger vehicle seat development and design. It further more supports the evaluation of static postural and dynamic seat comfort in normal everyday driving tasks and can be applied for future car design to reduce investment and improve comfort.

Tensor-based analysis of genetic influences on brain integrity using DTI in 100 twins

Information from the full diffusion tensor (DT) was used to compute voxel-wise genetic contributions to brain fiber microstructure. First, we designed a new multivariate intraclass correlation formula in the log-Euclidean framework. We then analyzed used the full multivariate structure of the tensor in a multivariate version of a voxel-wise maximum-likelihood structural equation model (SEM) that computes the variance contributions in the DTs from genetic (A), common environmental (C) and unique environmental (E) factors. Our algorithm was tested on DT images from 25 identical and 25 fraternal twin pairs. After linear and fluid registration to a mean template, we computed the intraclass correlation and Falconer's heritability statistic for several scalar DT-derived measures and for the full multivariate tensors. Covariance matrices were found from the DTs, and inputted into SEM. Analyzing the full DT enhanced the detection of A and C effects. This approach should empower imaging genetics studies that use DTI.

Cultura de tecidos desdiferenciados e embriões somáticos de Petiveria alliacea L. visando à produção de substâncias bioativas

Petiveria alliacea L. pertence à família Phytolaccacceae e é conhecida popularmente como guiné ou amansa-senhor, entre outros nomes. Tem sido muito utilizada na medicina popular como agente terapêutico, devido à diversas propriedades farmacológicas. Estudos fitoquímicos têm contribuído para a descoberta de grande variedade de substâncias biologicamente ativas produzidas em diferentes partes da planta (saponinas, alcalóides, flavonóides, sulfetos, taninos, cumarinas, entre outros). A análise química da raiz tem revelado grande quantidade de derivados sulfurados, principalmente o dibenzil trissulfeto (DTS), com atividade antifúngica, antibacteriana, antioxidante e anticancerígena. Visando avaliar a produção biotecnológica do DTS, o presente trabalho teve como objetivo, otimizar a cultura de novas linhagens de calos, células em suspensão e embriões somáticos, a partir de plantas de P. alliacea L. mantidas in vitro, com o monitoramento da capacidade biossintética das culturas. Os resultados mostraram que a produção de calos friáveis foi possível em explantes foliares inoculados em meio MS suplementado com PIC ou 2,4-D. Além da resposta calogênica, foi observada a produção de estruturas globulares caracterizadas como embriões somáticos. A ocorrência de embriogênese somática direta foi confirmada através da análise histológica do processo regenerativo. A indução de embriões somáticos gerou um processo de embriogênese secundária altamente repetitivo até 150 dias de cultura e conversão a plantas em freqüência de 5%. Em relação à cultura de células em suspensão a partir dos calos friáveis, observou-se uma diminuição do crescimento celular ao longo das subculturas. As culturas em suspensão originadas de tecido embriogênico secundário continuaram o processo repetitivo em meio líquido e apresentaram conversão a plantas em taxas mais baixas que as obtidas em meio sólido. A obtenção de plantas completas a partir dos embriões somáticos demonstrou a possibilidade de utilização desse sistema para a micropropagação dessa espécie. O monitoramento fitoquímico dos sistemas de cultura in vitro e plantas de campo mantidas em casa de vegetação durante 02 anos apresentou diferenças significativas, confirmando que a cultura de tecidos pode alterar as rotas metabólicas. A cromatografia gasosa acoplada à espectrometria de massas realizada com extrato em diclorometano de embriões secos e hexânico de embriões frescos e raízes secas de plantas provenientes de embriões somáticos, demonstrou a presença do DTS, constituindo, portanto, sistemas in vitro importantes para a modulação desta substância.

Comportamento sexual e uso de álcool e drogas entre homens que fazem sexo com homens no Ceará: tendências e práticas de risco para DST/AIDS

No Brasil, o s casos de AIDS entre homens que fazem sexo com homens (HSH) predominaram durante um longo período. A partir da década de 90, observa-se um declínio nesta categoria com o aumento de casos entre heterossexuais. Na região Nordeste, entretanto, os casos de AIDS entre HSH representam, ainda, cerca de 50% do total dos casos registrados em anos recentes. Nosso objetivo foi estudar o comportamento sexual e o padrão de consumo de drogas e álcool entre HSH no Ceará, enfatizando as tendências recentes e suas relações com práticas sexuais de risco para DTS/AIDS. Foram realizados quatro estudos seccionais em 1995, 1998, 2002 e 2005 no Ceará, nordeste do Brasil. A população do estudo foi composta por homens que fazem sexo com homens (HSH), com 14 anos ou mais , que referiram prática sexual anal ou oral com homens nos últimos 12 meses. A seleção dos participantes utilizou técnicas do tipo Snow Ball (1995, 1998, 2002); Time Space Sampling (2002) e Respondent Driven Sampling (2005). O primeiro artigo enfoca as tendências do comportamento sexual em Fortaleza ao longo destes quatro períodos e o segundo os preditores do consumo de álcool e drogas nos municípios de Fortaleza (n=401), Sobral (n=100) e a região do Cariri (n=100) em 2002. Análise se basearam nas comparações entre proporções, utilizando o teste do de Pearson e intervalos de 95% de confiança (IC95%) e análise de regressão logística multivariada para avaliação dos fatores associados ao consumo de álcool e drogas, utilizando-se como medida de associação a razão de chances (odds ratio OR) e seus respectivos intervalos de 95% de confiança. Resultados Práticas sexuais: Elevado percentual da população estudada referiu práticas sexuais de risco em 1995 (49,9%), decrescendo significativamente em 1998 (32,6%), tornando a crescer em 2002 (54,6%) e apresentando os menores percentuais em 2005 (31,4%). Este padrão não apresentou grandes variações por idade, mas em relação à escolaridade observou-se que os indivíduos com escolaridade mais elevada aumentaram as práticas de risco entre 1998 (28,6%) e 2002 (46,5%) decrescendo no último período (21,0%) enquanto aqueles com baixa ou média escolaridade só mostraram uma queda significativa no comportamento de risco entre 2002 (82,1% - baixa; 67,7% - média) e 2005 (29,1% - baixa; 34,3 média). A prática sexual anal com preservativo cresceu no decorrer dos anos variando de 43,3% a 53,7% entre a primeira e a última onda ( de tendência p<0.001). A relação anal sem preservativo foi uma prática com alto percentual na maioria dos anos. De 2002 a 2005, houve uma diminuição significativa (de alto percentual na maioria dos anos. De 2002 a 2005, houve uma diminuição significativa (de 57,7% para 26,3%) das relações fixas monogâmicas. Consumo de álcool e drogas: No estudo, 63% dos HSH participantes foram classificados como bebedores que se embriagam. Observou-se que o consumo crescente de álcool leva a um aumento do uso concomitante de outras drogas, sejam lícitas ou ilícitas. Foram variáveis preditoras de beber se embriagando: ter de 21 a 30 anos (OR: 1,5; IC 95%: 1,1-2,9); ter mais que 30 anos (OR: 1,6: IC95%: 1,2-2,3); ser solteiro/separado/divorciado (OR:3,0%; IC95%: 1,7-5,3); ser da raça negra (OR: 2,0 IC95%: 1,7-2,01); ser da raça parda (OR: 1,8 IC95%: 1,3-2,6); receber dinheiro por sexo (OR:2,0 IC95%: 1,8-2,9). As práticas sexuais dos SHS em Fortaleza apresentaram variações significativas ao longo doa anos estudados, semelhantemente a outros estudos internacionais. Vários fatores poderiam ser responsáveis por explicar o comportamento da curva observada em Fortaleza, seja no âmbito local, nacional ou internacional. Entre os fatores que podem explicar alterações observadas estariam: 1) redução nos recursos destinados à prevenção da AIDS no país devido a retirada de alguns organismos de cooperação internacional que se voltaram para outros países, como na África Leste Europeu, levando o Brasil a priorizar segmentos populacionais com maior vulnerabilidade; 2) grande impacto na prevenção das DST /AIDS na comunidade de homo/bissexuais masculinos, especialmente nos anos de 1998 a 2002; 3) o avanço no tratamento, surgimento de novas drogas, melhora da qualidade de vida e aumento da sobrevida, contribuindo para a construção da falsa ideia de segurança na população. Neste estudo a escolaridade mostrou-se um fator importante associado ao envolvimento em práticas sexuais não seguras. Os indivíduos com mais baixa escolaridade, no período de 1995 a 2002, se envolveram em maior risco, aparentando não terem sido atingidos pelas campanhas que possam ter ocorrido, principalmente no período de 1995 a 1998. A maior escolaridade apresenta-se como fator de proteção em todo o período estudado, provavelmente pelo maior acesso à informação. Finalmente, pode-se observar no ano de 2002 um elevado percentual de homens que consomem cinco ou mais doses em um dia típico e associam outras drogas ao consumo do álcool. Tal comportamento, dentro da população HSH, embora não seja caracterizado como dependência química, é alterado de maneira significativa pelo efeito etílico, levando à outras práticas de risco. Também se observou em nosso estudo que o consumo crescente de álcool leva a um aumento do uso de outras drogas, atuando para a adoção de comportamentos de risco. Existem evidências que suportam relação entre uso de outras drogas e a prática sexual de risco. Os indivíduos que referiram receber dinheiro em troca de sexo foram mais frequentemente classificados como bebedores que se embriagam. Os achados deste estudo mostram a importância da realização de uma vigilância comportamental contínua em relação ao HIV favorecendo o entendimento da dinâmica da epidemia junto das DST/AIDS nesta população vulnerável, assim como a importância que o álcool assume como problema de saúde pública neta população específica e a necessidade de se direcionar medidas voltadas para a sua prevenção.

Conservação in vitro de germoplasma de Petiveria alliacea L. utilizando cultura de tecidos e criopreservação

A implementação de estratégias visando à conservação de espécies medicinais apresenta grande importância, tanto do ponto de vista ecológico quanto econômico. Petiveria alliacea L., espécie da família Phytolacaceae, conhecida como guiné, erva-de alho, erva-tipi ou amansa-senhor, pode ser encontrada desde a América Central até a América do Sul. Esta espécie possui ampla utilização medicinal, devido à presença, em sua composição, de vários polissulfetos, como o DTS (dibenziltrissulfeto), com propriedades antifúngica, antineoplásica e imunomodulatória, entre outras. O objetivo deste trabalho foi a conservação in vitro de germoplasma de Petiveria alliacea obtido de diferentes populações ocorrentes no Rio de Janeiro, através de métodos baseados em cultura de tecidos e criopreservação. Plantas obtidas através da germinação in vitro foram utilizadas como matrizes para a micropropagação através da multiplicação de meristemas pré-existentes em meio MS sem reguladores de crescimento, e embriões somáticos foram obtidos de forma direta a partir da cultura de explantes foliares das linhagens estudadas (Magé MG; Marechal Hermes MH; Niterói NT; Vila Isabel VI e Planta envasada AL), em presença de PIC (20μM) e 2,4D (22,6 μM), após 60 dias de cultivo. Os ápices caulinares das plantas micropropagadas e os embriões somáticos obtidos foram submetidos à criopreservação através de técnicas de vitrificação, encapsulamento-vitrificação e encapsulamento-desidratação, com a avaliação da pré-cultura e de soluções crioprotetoras (PVS2 e PVS3), em diferentes concentrações e tempos de exposição. Os resultados mostraram uma taxa de 100% de germinação in vitro. As condições para a pré-cultura de ápices foram padronizadas, entretanto não foram obtidos resultados positivos após o descongelamento. Por outro lado, os embriões da linhagem AL (linhagem embriogênica em cultura há 24 meses) mantiveram sua capacidade multiplicativa (100%) (embriogênese secundária) quando submetidos à desidratação em sacarose (0,5M) e expostos às soluções de vitrificação PVS2 e PVS3 pelos menores tempos (15 e 30 minutos). Os diferentes meios de recuperação apresentaram respostas variáveis em relação à capacidade multiplicativa dos embriões. O encapsulamento/vitrificação foi a técnica que promoveu maior tolerância dos embriões ao congelamento. A recuperação dos embriões através de multiplicação após a criopreservação abre uma perspectiva de conservação de genótipos com alta produção de polissulfetos, de interesse para a indústria farmacêutica

Experimental and numerical study on power consumptions in a double-tube-socket pneumatic conveying system

A new methodology is proposed in this paper to predict the lowest power consumption for a double-tube-socket (DTS) pneumatic conveying system. This methodology is established on both experimental work and numerical simulation. After parametric studies by numerical simulation, the desired conveying cases which have the lowest power consumption were obtained. Finally those cases were carried out in our experimental system. The measured power consumption was close to that predicted. In this paper the experimental work is discussed and the numerical simulation introduced. (c) 2010 Elsevier B.V. All rights reserved.

长白山阔叶红松林林冠大气界面湍流主导时间尺度特征(英文)

使用多尺度分析方法分析了长白山阔叶红松林林冠大气界面湍流交换的主导时间尺度特征及相应的作用系数特征及大气层结和林冠结构的影响。发现:水平风速的DTS大于垂直风速的相应值,垂直风速的DCR大于水平风速的DCR。大气层结影响是非线性的。不稳定层结条件下的DTS和DCR大于稳定层结下。在强稳定层结和强不稳定层结条件下,DTS和DCR主要取决于来流特征。生长季节各高度DTS的变化规律较为复杂且不一致,非生长季节各高度具有一致的变化。不稳定层结条件下的生长季节水平风速DTS大于非生长季节;林冠结构可以显著影响主导时间尺度和主导过程贡献率。图2表1参15。

一种基于安全状态转移的简并测试集生成方法

在总结前人工作的基础上,结合安全操作系统对测试的特殊需求,提出了简并测试集(degenerate test set,简称DTS)的概念,设计了一种使用模型检测的基于安全状态转移的高效测试集生成方法.该方法以状态转移为化简对象,在利用模型检测技术生成测试用例的同时,归并相同的状态转移并化简需求集中的冗余属性,从而最终达到化简测试集的目的.在此基础上,探讨了单个用例失败时用例集的有效性问题,并对DTS生成算法进行了改进.实验结果表明,该方法可以有效地对测试集中的冗余进行化简.

叠前时间偏移: 基于波动方程的架构、发展和应用

This dissertation starts from the point that the prestack time migration can been considered as an approximation of the prestack depth migration, giving a wave equation based prestack time migration approach. The new approach includes: analytically getting the travel time and amplitude based on the one way wave equation and the stationary-phase theory, using ‘spread’ imaging method and imaging following the prestack depth migration, updating the velocity model with respect to the flats of the events in CRP gathers. Based on this approach, we present a scheme that can image land seismic data without field static correction. We may determine the correct near surface velocities and stack velocities by picking up the residual correction of the events in the CRP gathers. We may get the rational migration section based on the updated velocities and correct the migration section from a floating datum plane to a universal datum plane. We may adaptively determine the migration aperture according to the dips of the imaging structures. This not only speed up the processing, but may suppress the migration noise produce by the extra aperture. We adopt the deconvolution imaging condition of wave equation migration. It may partially compensate the geometric divergence. In this scheme, we use the table-driven technique which may enhance the computational efficiency. If the subsurface is much more complicated, it may be impossible to distinguish the DTS curve. To solve this problem, we proposed a technique to determine the appropriate range of the DTS curve. We synthesize DTS panel in this range using different velocities and depths, and stack the amplitude around the zero time. Determine the correct velocity and location of the considered grid point by comparing the values.

双聚焦偏移速度估计与可分表示叠前弹性反演

In exploration seismology, the geologic target of oil and gas reservoir in complex medium request the high accuracy image of the structure and lithology of the medium. So the study of the prestack image and the elastic inversion of seismic wave in the complex medium come to the leading edge. The seismic response measured at the surface carries two fundamental pieces of information: the propagation effects of the medium and the reflections from the different layer boundaries in the medium. The propagation represent the low-wavenumber component of the medium, it is so-called the trend or macro layering, whereas the reflections represent the high-wavenumber component of the medium, it is called the detailed or fine layering. The result of migration velocity analysis is the resolution of the low-wavenumber component of the medium, but the prestack elastic inversion provided the resolution of the high-wavvenumber component the medium. In the dissertation, the two aspects about the migration velocity estimation and the elastic inversion have been studied.Firstly, any migration velocity analysis methods must include two basic elements: the criterion that tell us how to know whether the model parameters are correct and the updating that tell us how to update the model parameters when they are incorrect, which are effected on the properties and efficiency of the velocity estimation method. In the dissertation, a migration velocity analysis method based on the CFP technology has been presented in which the strategy of the top-down layer stripping approach are adapted to avoid the difficult of the selecting reduce .The proposed method has a advantage that the travel time errors obtained from the DTS panel are defined directly in time which is the difference with the method based on common image gather in which the residual curvature measured in depth should be converted to travel time errors.In the proposed migration velocity analysis method, the four aspects have been improved as follow:? The new parameterization of velocity model is provided in which the boundaries of layers are interpolated with the cubic spline of the control location and the velocity with a layer may change along with lateral position but the value is calculated as a segmented linear function of the velocity of the lateral control points. The proposed parameterization is suitable to updating procedure.? The analytical formulas to represent the travel time errors and the model parameters updates in the t-p domain are derived under local lateral homogeneous. The velocity estimations are iteratively computed as parametric inversion. The zero differential time shift in the DTS panel for each layer show the convergence of the velocity estimation.? The method of building initial model using the priori information is provided to improve the efficiency of velocity analysis. In the proposed method, Picking interesting events in the stacked section to define the boundaries of the layers and the results of conventional velocity analysis are used to define the velocity value of the layers? An interactive integrate software environment with the migration velocity analysis and prestack migration is built.The proposed method is firstly used to the synthetic data. The results of velocity estimation show both properties and efficiency of the velocity estimation are very good.The proposed method is also used to the field data which is the marine data set. In this example, the prestack and poststack depth migration of the data are completed using the different velocity models built with different method. The comparison between them shows that the model from the proposed method is better and improves obviously the quality of migration.In terms of the theoretical method of expressing a multi-variable function by products of single-variable functions which is suggested by Song Jian (2001), the separable expression of one-way wave operator has been studied. A optimization approximation with separable expression of the one-way wave operator is presented which easily deal with the lateral change of velocity in space and wave number domain respectively and has good approach accuracy. A new prestack depth migration algorithm based on the optimization approximation separable expression is developed and used to testing the results of velocity estimation.Secondly, according to the theory of the seismic wave reflection and transmission, the change of the amplitude via the incident angle is related to the elasticity of medium in the subsurface two-side. In the conventional inversion with poststack datum, only the information of the reflection operator at the zero incident angles can be used. If the more robust resolutions are requested, the amplitudes of all incident angles should be used.A natural separable expression of the reflection/transmission operator is represented, which is the sum of the products of two group functions. One group function vary with phase space whereas other group function is related to elastic parameters of the medium and geological structure.By employing the natural separable expression of the reflection/transmission operator, the method of seismic wave modeling with the one-way wave equation is developed to model the primary reflected waves, it is adapt to a certain extent heterogeneous media and confirms the accuracy of AVA of the reflections when the incident angle is less than 45'. The computational efficiency of the scheme is greatly high.The natural separable expression of the reflection/transmission operator is also used to construct prestack elastic inversion algorithm. Being different from the AVO analysis and inversion in which the angle gathers formed during the prstack migration are used, the proposed algorithm construct a linear equations during the prestack migration by the separable expression of the reflection/transmission operator. The unknowns of the linear equations are related to the elasticity of the medium, so the resolutions of them provided the elastic information of the medium.The proposed method of inversion is the same as AVO inversion in , the difference between them is only the method processing the amplitude via the incident angle and computational domain.

The effect of variability in the powder/liquid ratio on the strength of zinc phosphate cement

Aim: To investigate (a) variability in powder/liquid proportioning (b) effect of the extremes of any such variability on diametral tensile strength (DTS), in a commercial zinc phosphate cement. Statistical analyses (a = 0.05) were by Student's t-test in the case of powder/liquid ratio and one-way ANOVA and Tukey HSD for for pair-wise comparisons of mean DTS. The Null hypotheses were that (a) the powder-liquid mixing ratios observed would not differ from the manufacturer's recommended ratio (b) DTS of the set cement samples using the extreme powder/liquid ratios observed would not differ from those made using the manufacturer's recommended ratio. Methodology: Thirty-four undergraduate dental students dispensed the components according to the manufacturer's instructions. The maximum and minimum powder/liquid ratios (m/m), together with the manufacturer's recommended ratio (m/m), were used to prepare cylindrical samples (n = 3 x 34) for DTS testing. Results: Powder/liquid ratios ranged from 2.386 to 1.018.The mean ratio (1.644 (341) m/m) was not significantly different from the manufacturer's recommended value of 1.718 (p=0.189). DTS values for the maximum and minimum ratios (m/m), respectively, were both significantly different from each other (p<0.001) and from the mean value obtained from the manufacturer's recommended ratio (m/m) (p<0.001). Conclusions: Variability exists in powder/liquid ratio (m/m) for hand dispensed zinc phosphate cement. This variability can affect the DTS of the set material.