Quantitative analysis of aluminum dross by the Rietveld method

Aluminum white dross is a valuable material principally due to its high metallic aluminum content. The aim of this work is to develop a method for quantitative analysis of aluminum white dross with high accuracy. Initially, the material was separated into four granulometric fractions by means of screening. Two samples of each fraction were obtained, which were analyzed by means of X-ray fluorescence and energy dispersive spectroscopy in order to determine the elements present in the samples. The crystalline phases aluminum, corundum, spinel, defect spinel, diaoyudaoite, aluminum nitride, silicon and quartz low were identified by X-ray diffraction. The quantitative phase analysis was performed by fitting the X-ray diffraction profile with the Rietveld method using the GSAS software. The following quantitative results were found: 77.8% aluminum, 7.3% corundum, 2.6% spinel, 7.6% defect spinel, 1.8% diaoyudaoite, 2.9% aluminum nitride, and values not significant of quartz and silicon.

Gold and dross /

Mode of access: Internet.

Dross,

Mode of access: Internet.

Etelä- ja Länsi-Suomen jätesuunnittelun toteutumisen 1. väliarvio

Jätehuollon tavoitetilana Etelä- ja Länsi-Suomessa vuonna 2020 on, että jätemäärä on vähentynyt, hyödyntäminen lisääntynyt ja jätehuolto muuttunut suunnitelmalliseksi. Jätehuoltoa kehitetään yhteistyössä sidosryhmien kanssa. Tässä ensimmäisessä väliarviossa tarkastellaan Etelä- ja Länsi-Suomen jätesuunnitelman sekä Keski-Suomen jätesuunnitelman toteutumista ja vaikuttavuutta. Väliarvio sisältää seurantatiedot jätemääristä ja tietoa toimenpiteistä jätehuollon kehittämiseksi. Tarkastelu kattaa Etelä-Pohjanmaan, Hämeen, Kaakkois-Suomen, Keski-Suomen, Pirkanmaan, Uudenmaan ja Varsinais-Suomen ELY-keskusten toiminta-alueet. Jätesuunnitelmissa vuonna 2009 asetetut tavoitteet ovat edenneet osittain. Painopisteet biohajoavat jätteet sekä yhdyskunta- ja haja-asutuslietteet ovat lähteneet edistymään parhaiten. Haastavimmat teemat, jotka eivät ole edenneet odotetusti, ovat pilaantuneita maita sekä jätehuoltoa poikkeuksellisissa tilanteissa koskevat painopisteet. Lähiaikoina kehittämistä vaativat teemat ovat painopisteet rakentamisen ateriaalitehokkuus sekä tuhkat ja kuonat. Näissä teemoissa on konkreettisia toteutumismahdollisuuksia ja useita kiinnostuneita toimijoita. Uusiomateriaalien kuten tuhkien ja kuonien, teollisuuden sivutuotteiden ja jätemateriaalien käyttöä on mahdollisuus lisätä luonnon kiviainesten sijaan. Rakentamisen materiaalitehokkuutta voidaan ennakoida suunnitelmallisuudella, resurssitehokkuudella ja säästävällä purkamisella. Väliarviossa on esitetty jatkotoimenpiteitä, jotka mahdollistavat jätesuunnitelmien toteutumisen. Asetetuista keskeisistä painopisteistä rakentamisen materiaalitehokkuus sekä tuhkat ja kuonat edellyttävät eniten jatkotoimenpiteitä. Lisäksi yhdyskuntajätteiden kierrätystä tulisi lisätä.

Dificultades del proceso educativo con sujetos toxicómanos.

Ordenar el marco teórico que sustenta la práctica educativa con sujetos toxicómanos. Comunidad terapéutica Can Puig, en concreto 'La Granja' de la que se escoge a tres sujetos representativos de una problemática muy diferente. La selección de estos individuos se ha efectuado en base a tres variables: motivación inicial del sujeto, momento en que accede al programa DROSS y evolución en la Comunidad Terapéutica. La investigación se inicia con una primera parte dedicada al trabajo conceptual e historiográfico de la Pedagogía Social y de las Comunidades Terapéuticas. Seguidamente, en la segunda parte, se analiza más detalladamente una comunidad terapéutica: 'La Granja'. Por último, se procede al análisis de tres casos particulares de este mismo centro. Los instrumentos utilizados son observaciones, documentos relacionados con el régimen interior de la institución y entrevistas. Estadísticas y tablas. Los resultados obtenidos tienen que ver con que el modelo de intervención con sujetos toxicómanos no es el correcto, ya que aproximadamente un 60 por ciento vuelve a consumir drogas; y que en los tres casos estudiados se ha observado que sin llegar a interiorizar los contenidos, los sujetos iban pasando de fase de forma mecánica. Las dificultades que se hayan a lo largo del proceso son inherentes a la toxicomanía, siendo el modelo de intervención poco correcto. Es importante que los educadores reflexionen sobre el lugar dónde trabajan para así poder analizar la tarea que desempeñan y promover cambios. Se ha podido apreciar que en el análisis de los tres casos, la existencia de la falta de vigor en algunos aspectos del programa. Finalizando, se debe cuestionar la concepción de la comunidad terapéutica como 'medio que cura' y plantearse otro tipo de intervenciones educativas.

Aportaciones de la educación en el abordaje de la toxicomanía.

Contribuir a la formalización de lo educativo en el ámbito de las drogodependencias, así como poder resolver algunos interrogantes y provocar otros a partir de la reflexión provocada por la investigación. Programa DROSS, programa Integral a las drogodependencias. La investigación en general es un trabajo conceptual e historiográfico de lo que la educación puede aportar al tema de las drogodependencias. La investigación se estructura en tres partes: la primera hace referencia a cuestiones relacionadas con la Pedagogía Social, la segunda aborda el marco teórico de dos modelos diferenciados (positivista y estructural), y la tercera parte aborda el tema de las aplicaciones prácticas del modelo estructural. Se entiende la Pedagogía como ciencia formalizada que proporciona un lugar y un saber que permite la intervención educativa, en este caso con drogodependientes. La intervención del educador puede situarse en tres niveles: en grupos y vida cuotidiana, como técnico de organización, y como científico e investigador. El paradigma positivista articula su acción a partir del modelo psicosocial, éste se constituye en hegemónico en la actualidad. Este modelo tiende a la eliminación del conflicto por la abstinencia, privilegiando 'modelos de conductas', y definiendo lo que está bien y lo que está mal. La Pedagogía y los modelos que de ellos se derivan son los que han de marcar la actuación profesional del educador.

Aproveitamento de resíduo de caulim em cerâmica branca

The world market of Kaolin has been growing as new investments for better quality of materials have been applied. This market produces amounts of dross that are put in the environment in a wrong way, causing damages to it. Trying to reduce these damages, researches have been done in an attempt to use kaolin dross in ceramic. The disposal of kaolin dross in the environment by the industries of the states of Rio Grande do Norte and Paraiba have great impact in society. Usually this dross is disposed clandestinely in places like roads, river banks and lands of small cities. The present work shows the characteristics of the kaolin produced by the mining company in Junco do Seridó, Paraiba state, western Seridó, 300 km from Natal, in the border of both states. After that, researches were done to study its physical and the chemistry characteristics, trying to see if it can be used in white ceramic. The samples got were bolted in fabric of 325# . The technological characteristics tried to use it as a product in white ceramic. For that, it was made a haracterization of the subject matter through enlargement analyses, ATG and ATD, elaborating three formulations that were burned in four different temperatures, 1175, 1200, 1250 and 1300 degrees centigrade up to 30 minutes. After the burning, the subjects were submitted to water absorbing tests, linear retreating, apparent porosity, apparent specific mass, resistance to flexibility and MEV. For one of the mixtures it was obtained demanded properties for a semi porous material

Caracterização de resíduos industriais visando a seu aproveitamento na fabricação de aço

Esse trabalho consiste na caracterização do resíduo de mármore, lama fina de aciaria e borra de alumínio, para averiguar a viabilidade técnica da utilização de tais resíduos na dessulfuração e desfosforação de ferro-gusa líquido. A caracterização desses resíduos foi feita através de análises químicas, granulométricas, difração de raios X e microscopia eletrônica de varredura (MEV) com micro análise por Espectroscopia por Energia Dispersiva de Raios X (EDS). A lama fina de aciaria apresenta um teor de FeO de 84,90%, o resíduo de mármore apresentou um teor de 61,5% de CaO e 33,9% de MgO e a borra de alumínio apresentou 36,5% de Al metálico e 62% de Al2O3. A granulometria do resíduo de mármore apresentou um tamanho de grão médio igual 42,810 µm. Já, na borra de alumínio, o tamanho médio foi de 101,803 µm. A lama fina de aciaria LD apresentou, em torno de 54,7% de sua granulometria, entre 0,15 e 0,075mm. Esses resultados apontam para a viabilidade técnica da utilização desses materiais na dessulfuração e desfosforação do ferro-gusa.

Primary optics for efficient high-brightness LED color mixing

In SSL general illumination, there is a clear trend to high flux packages with higher efficiency and higher CRI addressed with the use of multiple color chips and phosphors. However, such light sources require the optics provide color mixing, both in the near-field and far-field. This design problem is specially challenging for collimated luminaries, in which diffusers (which dramatically reduce the brightness) cannot be applied without enlarging the exit aperture too much. In this work we present first injection molded prototypes of a novel primary shell-shaped optics that have microlenses on both sides to provide Köhler integration. This shell is design so when it is placed on top of an inhomogeneous multichip Lambertian LED, creates a highly homogeneous virtual source (i.e, spatially and angularly mixed), also Lambertian, which is located in the same position with only small increment of the size (about 10-20%, so the average brightness is similar to the brightness of the source). This shell-mixer device is very versatile and permits now to use a lens or a reflector secondary optics to collimate the light as desired, without color separation effects. Experimental measurements have shown optical efficiency of the shell of 95%, and highly homogeneous angular intensity distribution of collimated beams, in good agreement with the ray-tracing simulations.

Inhomogeneous source uniformization using a shell mixer Köhler integrator

High flux and high CRI may be achieved by combining different chips and/or phosphors. This, however, results in inhomogeneous sources that, when combined with collimating optics, typically produce patterns with undesired artifacts. These may be a combination of spatial, angular or color non-uniformities. In order to avoid these effects, there is a need to mix the light source, both spatially and angularly. Diffusers can achieve this effect, but they also increase the etendue (and reduce the brightness) of the resulting source, leading to optical systems of increased size and wider emission angles. The shell mixer is an optic comprised of many lenses on a shell covering the source. These lenses perform Kohler integration to mix the emitted light, both spatially and angularly. Placing it on top of a multi-chip Lambertian light source, the result is a highly homogeneous virtual source (i.e, spatially and angularly mixed), also Lambertian, which is located in the same position with essentially the same size (so the average brightness is not increased). This virtual light source can then be collimated using another optic, resulting in a homogeneous pattern without color separation. Experimental measurements have shown optical efficiency of the shell of 94%, and highly homogeneous angular intensity distribution of collimated beams, in good agreement with the ray-tracing simulations.

The Kinetics of Myeloid Derived Suppressor Cell Frequency and Function in Chronic Retroviral Infections

Thesis (Ph.D.)--University of Washington, 2016-06