Study of the dimensions of double-torsion test specimens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characteristics of the double-torsion test to determine the R-curve of ceramic materials

Double-torsion tests were carried out on a commercial ceramic floor tile to verify whether this test is suitable for determining the R-curve of ceramics. The instantaneous crack length was obtained by means of compliance calibration, and it was found that the experimental compliance underestimates the real crack length. The load vs. displacement curves were also found to drop after maximum loading, causing the stress intensity factor to decline. The R-curves were calculated by two methods: linear elastic fracture mechanics and the energetic method. It was obtained that the average values of crack resistance, R, and the double of the work of fracture, 2 · γwof, did not depend on notch length, a0, which is a highly relevant finding, indicating that these parameters were less dependent on the test specimen's geometry. The proposal was to use small notches, which produce long stable crack propagation paths that in turn are particularly important in the case of coarse microstructures.

Aspergillus fumigatus fungus ball in hospitalized patients with chronic pulmonary disease: usefulness of double immunodiffusion test as a screening procedure

Double immunodiffusion (DID) was used as a screening test for the diagnosis of aspergillosis. Three hundred and fifty patients were tested, all of them referred from a specialized chest disease hospital and without a definitive etiological diagnosis. When DID was positive addtional information such as clinical history and radiographic findings were requested and also surgical specimens were obtained whenever possible. Specific precipitin hamds for Aspergillus fumigatus antigen were found in 29 (8.3%) of 350 patients sera. Nineteen (65.5%) of the 29 patients with positive serology were recognized as having a fungus ball by X-rays signs in 17 or by pathological examination in 2 or by both in 8 patients. This two-year prospective study has shown that pulmonary aspergillos is a considerable problem among patiens admitted to a Chest Diseases Hospital, especially in those with pulmonary cavities or bronchiectasis.

The double triangular test in practice

The double triangular test was introduced twenty years ago, and the purpose of this paper is to review applications that have been made since then. In fact, take-up of the method was rather slow until the late 1990s, but in recent years several clinical trial reports have been published describing its use in a wide range of therapeutic areas. The core of this paper is a detailed account of five trials that have been published since 2000 in which the method was applied to studies of pancreatic cancer, breast cancer, myocardial infarction, epilepsy and bedsores. Before those accounts are given, the method is described and the history behind its evolution is presented. The future potential of the method for sequential case-control and equivalence trials is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.

Double effort test for evaluation of aerobic capacity of diet-induced obese rats

Introduction: The literature lacks studies about lactate actions and some limitations in studies involving healthy individuals or patients with some metabolic disorder. Objectives: This study aimed to evaluate the protocol of double effort test for obese-induced rats. Methods: Fourteen male Wistar rats were divided into two groups: Control (Con) and Obese (Obe). The control group was fed with standard chow and water ad libitum. The obese group was fed with standard chow, water ad libitum and hyperlipidic diet. Twelve weeks after the beginning of the hyperlipidic diet, insulin tolerance test, Maximal Lactate Steady State (MLSS) test and the double efforts test were performed. Results: The diet was effective to promote obesity. The obese group decreased insulin sensitivity in approximately 19% (Con = 2.156 ± 0.1187 AU vs Obe = 1.742 ± 0.1551 AU). The lactate concentration and velocity of anaerobic threshold at MLSS test were 3.780 ± 0.09 mmol/L e 18 m.min-1 in both groups. The velocity of anaerobic threshold estimated by double efforts test was 15.59±0.653 m.min-1 in Con group control animals and 16.42±0.672 m.min-1 in Obe group. The double effort test underestimated around 13% and 8.7% the aerobic capacity in control and obese groups respectively, however, presented significant correlation with MLSS (r = 0,88; P < 0,0075 controls / r = 0,92; P < 0,0031 obese). Conclusion: So, the double effort test can be an interesting alternative to evaluate the aerobic capacity for both healthy sedentary and obese animals.

An investigation of the hot-torsion test used in studies of hot workability

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Double blind test series

Braille is a communication tool in decline, in America by 80% since 1950, and in the UK to the extent that only 1% of blind people are now thought to read Braille.1, 2 There are a variety of causal factors, including the phasing out of Braille instruction due to the educational mainstreaming of blind children and the resistance to learning Braille by those who lose sight later in life.3Braille is a writing system of raised dots that allows blind people to read and write tactilely. Each Braille character comprises a cell of six potentially raised dots, two dots across and three dots down. It is designed only to communicate the message and does not convey the tonality provided by visual fonts.However, in his book Design Meets Disability, Graham Pullin, observes that: “Braille is interesting and beautiful, as abstract visual and tactile decoration, intriguing and indecipherable to the nonreader ” and continues; “…braille could be decorative for sighted people.”4I assert that the increasing abandonment of Braille frees it from its restrictive constraints, opening it to exploration and experimentation, and that this may result in Braille becoming dynamic expression for the sighted, as well as the partially sighted and blind.Printmaking is well suited for this exploration. Printmaking processes and techniques can result in prints aesthetically compelling to both senses of sight and touch. Established approaches, such as flocking, varnishes, puff-ink, embossing and die cut, combined with experiments in new techniques in laser cutting and 3D printing, create visually and texturally vibrant prints.In this paper I will detail my systematic investigation of sensually expressive printmaking concentrating on the issues surrounding Braille as a printmaking design element paying particular attention to the approaches and techniques used not only in producing its visual style but to those techniques used to keep it integrally tactile.

Finite Element Analysis of Shear Versus Torsion Adhesive Strength Tests for Dental Resin Composites

Stress distributions in torsion and wire-loop shear tests were compared using three-dimensional (3-D) linear-elastic finite element method, in an attempt to predict the ideal conditions for testing adhesive strength of dental resin composites to dentin. The torsion test presented lower variability in stress concentration at the adhesive interface with changes in the proportion adhesive thickness/resin composite diameter, as well as lower variability with changes in the resin composite elastic modulus. Moreover, the torsion test eliminated variability from changes in loading distance, and reduced the cohesive fracture tendency in the dentin. The torsion test seems to be more appropriate than wire-loop shear test for testing the resin composite-tooth interface strength. (c) Koninklijke Brill NV, Leiden, 2009

Desenvolvimento de ferramentas e provetes para o ensaio Thick Adherend Shear Test (TAST).

As estruturas coladas são geralmente projetadas para que o adesivo seja essencialmente sujeito a esforços de corte, pois neste tipo de solicitação o adesivo apresenta melhores caraterísticas mecânicas. A avaliação do comportamento ao corte pode ser realizada com o adesivo no estado maciço ou como camada fina em juntas adesivas. Os métodos que permitem avaliar o comportamento ao corte, quer para o adesivo, quer para as juntas, são: o ensaio Iosipescu ou V-Notched beam shear method, o ensaio de borboleta ou Notched plate shear method (Arcan), o ensaio de torsão, o ensaio de tração numa junta de sobreposição simples e o ensaio Thick Adherend Shear Test (TAST). Os ensaios Arcan e Iosipescu, tal como o ensaio de torção, podem ser realizados em provetes de adesivo maciço ou em juntas. O ensaio de torção é pouco utilizado, porque a aplicação do esforço de corte exige dispositivos e equipamentos de ensaios complexos. Os ensaios Arcan e Iosipescu utilizam provetes com entalhes e podem introduzir alguma dificuldade na medição precisa das deformações. O ensaio de tração numa junta de sobreposição simples é um dos métodos mais usados para caraterizar uma junta adesiva, porque é um método simples, as juntas são de fácil fabrico e pode ser realizado em máquinas universais de ensaios mecânicos. Neste ensaio os aderentes estão sujeitos a uma solicitação de tração, enquanto a camada de adesivo está sujeita a esforços de corte combinados com esforços de arrancamento. Os esforços de arrancamento resultam da própria geometria da junta na qual existe um desalinhamento das forças de tração, mesmo quando são colocados calços (reguladores de espessura) nos locais de amarração. O ensaio TAST é dos mais populares para obtenção das propriedades ao corte, uma vez que tanto as ferramentas de ensaio como o fabrico dos provetes são relativamente simples. Este ensaio é realizado em junta sendo os substratos espessos e de aço que, devido à sua elevada rigidez, contribuem para um esforço de corte praticamente puro no adesivo. Neste trabalho realizou-se o projeto e a fabricação das ferramentas, gabarit e substratos necessários para a execução de provetes TAST e ensaios utilizando diferentes adesivos.

Coccidioidomycosis in Brazil. A case report

Coccidioidomycosis is an endemic infection with a relatively limited geographic distribution: Mexico, Guatemala, Honduras, Colombia, Venezuela, Bolivia, Paraguai, Argentina and the southwest of the United States. In these countries, the endemic area is restricted to the semiarid desert like regions which are similar to the northeast of Brazil. Case report: The patient is a 32 year-old male, born in the state of Bahia (Northeast of Brazil) and has been living in São Paulo (Southeast) for 6 years. He was admitted at Hospital das Clínicas, at the Department of Pneumology in October 1996, with a 6 month history of progressive and productive cough, fever, malaise, chills, loss of weight, weakness and arthralgia in the small joints. Chest x-rays and computerized tomography disclosed an interstitial reticulonodular infiltrate with a cavity in the right upper lobe. The standard potassium hydroxide preparation of sputum and broncoalveolar lavage demonstrated the characteristic thickened wall spherules in various stages of development. Sabouraud dextrose agar, at 25° C and 30° C showed growth of white and cottony aerial micelium. The microscopic morphology disclosed branched hyphae characterized by thick walled, barrel shaped arthroconidia alternated with empty cells. The sorological studies with positive double immunodiffusion test, and also positive complement fixation test in 1/128 dilution confirmed the diagnosis. The patient has been treated with ketoconazole and presents a favorable clinical and radiological evolution

CORAL SNAKE ANTIVENOM PRODUCED IN CHICKENS (Gallus domesticus)

The production of anti-snake venom from large mammal's blood has been found to be low-yielding and arduous, consequently, antivenom immunoglobulins for treatment are achieved regularly as polyvalent serum. We have standardized an undemanding technique for making purified immunoglobulin IgY antivenom consisting of polyclonal antibodies against coral snake venom in the egg yolk of immunized hens. We have adapted a reported process of antibody purification from egg yolks, and achieved 90% antibody purity. The customized technique consisted of the removal of lipids from distilled water-diluted egg yolks by a freeze–thaw sequence. The specific immunoglobulins were present in the egg yolk for up to 180 days postimmunization. Therefore, by means of small venom quantities, a significant amount of immunoglobulins were found in an adequately purified state (The obtained material contained about 90% pure IgY). The antigen binding of the immunoglobulins was detected by a double immunodiffusion test. Titers of antibodies in the yolk were estimated with a serum protection assay (Median effective dose = ED50) (ED50= 477 mg/kg). Given that breeding hens is economically feasible, egg gathering is noninvasive and the purification of IgY antibodies is quick and easy, chicken immunization is an excellent alternative for the production of polyclonal antibodies. To the best of our knowledge, this is the first coral snake antivenom prepared in birds.

Standardization and evaluation of ELISA for the serodiagnosis of amoebic liver abscess

An ELISA test for the serological diagnosisof amoebic liver abscess (ALA) was standardized and evaluated in sera from three groups of patients: (1) three patients with diagnosis confirmed by isolation of the parasite,(2) thirty seven patients with diagnosis established by clinical findings and ultrasound studies and (3) seven patients whose diagnosis were established by clinical findings and a positive double immunodifusion test. Ninety one serum samples from healthy subjects and 22 from patients with other liver or parasitic diseases were also included in the study. the optimum concentration of Entamoeba histolytica antigen was 1.25 µg/ml and optimum dilutions of serum and anti-human IgG-alkaline phosphatase conjugate were 1:400 and 1:4000 respectively. The cut-off point of the ELISA test in this study was an absorbance value of 0.34. The test parameters were: sensitivity = 95.7 per cent, specificty = 100 per cent, positive predictive value = 100 per cent and negative predictive value = 98.2 per cent.The ELISA test was found to be of great use as a diagnostic tool for the establishment of amoebic etiology in patients with clinical supposition of ALA. The test could also be used for seroepidemiological surveys of the prevalence of invasive amoebiasis in a given population, since it allows the processing of a greater number of samples at a lower cost tahn other serological tests.

Nivel de concordancia en la interpretación de calcificaciones mamarias en las pacientes que fueron llevadas a biopsia por esterotaxia en la FCI –IC entre noviembre de 2004 a noviembre de 2008

Propósito: establecer la variabilidad inter observador en la categorización de las microcalcificaciones mamográficas según la clasificación vigente (BIRADS 4 edicion) entre dos evaluadores mediante un estudio de concordancia de consistencia. Determinar las razones de probabilidad y el valor predictivo positivo de categoría de microcalcificaciones. Materiales y métodos: este estudio incluye 108 placas mamográficas de 107 pacientes , mujeres con edades entre los 31 y 90 años a quienes se les había practicado biopsia guiada con esterotaxia por calcificaciones mamarias en la FCI – IC entre noviembre de 2004 a noviembre de 2008 y cuyos registros mamograficos se encontraran disponibles para análisis. Se diseñó una hoja de recolección de datos con la cual dos examinadores calificaban las calcificaciones según se describen en el BIRADS 4 edición sin conocer el resultado de la patología ni la calificación del otro examinador (doble ciego). Posteriormente se aplico un análisis Kappa Ponderado para determinar el nivel de concordancia más allá del azar entre los dos examinadores. Se Calcularon los valores predictivos positivos y las razones de probabilidad para cada categoría de calcificaciones.