999 resultados para Disposição para tecnologia


Relevância:

60.00% 60.00%

Publicador:

Resumo:

Este estudo pretende esclarecer o processo de percepção de valor do consumidor ao utilizar seu telefone celular para fazer pagamentos (serviço de pagamento móvel), e sua disposição para utilizar o serviço de pagamento móvel de conteúdo tecnológico. Para tanto foi realizada pesquisa exploratória com consumidores, cujos resultados sugeriram atributos de qualidade (facilidade, velocidade, e conveniência), sacrifício (tarifas) e risco percebidos pelos entrevistados em relação ao pagamento Móvel.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Na actual monografia intitulada “Sistemas de Tratamento e Disposição dos Resíduos Sólidos” adoptar-se-á as teorias clássicas de solos, para representar os resíduos sólidos urbanos. No que diz ao tratamento e disposição, diversos métodos e técnicas vão ser apresentados. Assim esta pesquisa tem como objectivo principal avaliar o Aterro Sanitário proposto para Santiago, 1999 e a tecnologia do Compact Power (pirólise/gasificação). Os dados dos resíduos sólidos ficaram restringidos aos resíduos urbanos, encontrando-se uma grande heterogeneidade e constantes questionamentos em diversas bibliografias. Analisa-se os elementos base para o dimensionamento do Aterro Sanitário abrangendo um estudo mais aprofundado sobre a estabilização dos taludes. Quanto ao Compact Power, far-se-á a apresentação da planta que incluiu duas linhas, uma para o resíduo misturado e o outro para resíduos separados, uma planta de compostagem e uma planta de conversão térmica avançada (empregando os processos de pirólises, gaseificação e oxidação a alta temperatura). Na compilação deste documento, encontra-se uma análise SWOT, com o intuito de melhor analisar as referidas tecnologias apresentadas.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

O teste de comprimento de plântulas possui vantagens significativas para a avaliação do vigor de sementes. Além do baixo custo, não há necessidade de equipamentos sofisticados, nem recursos humanos altamente especializados e os resultados são obtidos rapidamente. Contudo, tem-se notado a presença de plântulas com hipocótilos grossos e curtos na realização deste teste quando conduzido com 20 sementes de soja, o que pode interferir nos resultados. O objetivo deste trabalho foi avaliar os efeitos do tamanho da amostra (20 e 10 sementes), diâmetro do rolo de germinação (três diâmetros) e tamanho das sementes (peneiras 12, 13 e 14) sobre os resultados do teste de comprimento de plântulas de soja. Neste teste, realizado com 20 sementes, a disposição das sementes em duas fileiras, o diâmetro do rolo de germinação e o tamanho das sementes interferiram nos resultados do teste. No teste conduzido com 10 sementes tais efeitos não foram observados, indicando que tal metodologia favorece a reprodutibilidade dos resultados.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

A Tecnologia da Informação, ao colocar à disposição dos bancos todo o ferramental para automatizar seus processos, foi a principal causa da queda da quantidade de postos de trabalho no setor bancário

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Esta dissertação de mestrado teve como objetivo analisar a produtividade do trabalho dos Magistrados do Poder Judiciário Brasileiro. O objetivo específico foi tentar compreender as contribuições da Tecnologia da Informação e da Inovação para a produtividade do trabalho dos Magistrados. A tecnologia da informação e a inovação têm sido responsáveis pela otimização de tarefas nas mais diversas áreas, proporcionando muitos benefícios, que vão desde a economia de tempo na realização das atividades até a redução de custos. Para verificar as contribuições da tecnologia da informação e da inovação na produtividade do trabalho dos magistrados foi adotado a estudo de caso, o qual teve como foco o Superior Tribunal de Justiça (STJ). Nesse sentido, a pesquisa foi conduzida por meio de levantamento e análise de dados provenientes de documentos, da Internet e de entrevistas. Justamente, procurando reconhecer quais são as ferramentas de TI e quais são as inovações colocadas à disposição dos magistrados do STJ para o desempenho de sua função, como se dá o alinhamento com o planejamento estratégico e em que medida a TI e a inovação tem possibilitado o aumento da produtividade do trabalho dos magistrados do STJ. As conclusões depreendidas deste estudo revelam que de fato há um aumento da produtividade do trabalho dos magistrados do STJ com o uso da TI e da Inovação.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The city of Natal comprises an area of about 170 km² (65,63 squares miles). The Dunas-Barreiras Aquifer is the most important reservoir of the coastal basin of RN. It is being responsible for the water supplying of about 70% of the population, however, due to the sewage disposal system by cesspools and drains, it is presently affected in a great extent by nitrates contamination. Thus, the present work proposes to research the utilization of contaminated water by nitrates of this fountainhead and find cost of the potable water through the ionic exchange technology. This technology consists in the removal of mineral salts by the exchange of cations for one ion of hydrogen (H+), through the passage of water by cationic resin bed and, secondly, by the exchange of the anions for hydroxyl ions (OH-) through a anionic resin bed. The obtained results have showed the waters derived from fountains, big water holes and shallow wells were microbiologically contaminated, while the waters derived from deep wells (above 70 m 76,58 yards) were free of contamination. Thus, only these ones are suitable to the use of ionic technology. The experiments were conducted with the resin IMAC-HP-555 such as kinetic, thermodynamic, and adsorption by fixed bed studies, being obtained several project variables for the experimental column, as follow: work temperature of 25oC; resin maximum capacity maximum e mean of adsorption ==0,01692 g NO3-1/g R e 0,0110 g NO3-1/g R, respectively. On the experimental column were performed breakthrough tests which pointed for an average ideal average speed of work of 13.2 m / h, with an average efficiency of 45% of adsorption, an optimal concentration of NaCl desorption of 8%, and an ideal desorption time of 80 minutes for the equilibrium conditions of water from the Dunas-Barreiras aquifer. Scale projection for ion-exchange column for denitrification, for these variables, using a computer modeling programme, to project the column of ion exchange ROREX-420/2000, obtained a cost for the drinking water denitrified by this system of R$ 0,16 / m3

Relevância:

30.00% 30.00%

Publicador:

Resumo:

In this assignment, will be assessed the conditions of operation for the final disposal of household solid waste landfill in the city of Cachoeira Paulista-SP. The theme chosen for research is of great social importance therefore is directly related to the well-being of the people, sustainable development, environmental protection and public health. Everyone should be aware of the problems related to improper final disposal of solid waste of any kind. The objectives of the study were: analyse the conditions of operation of the landfill; verify the treatment technology of percolating liquids (slurry) generated in the landfill; examine whether the landfill obey the rules; which cities in the region depend on the disposal system, verify that there are flaws in the final destination of solid waste in the municipality and in the cities of the region. The research is primarily a bibliographic review, obtained by querying the database and virtual libraries. Technical visits were also held at the study site, to check spot the methodology employed in the operation of landfill This work concluded that for the period under study, the landfill was as a landfill site, therefore, in accordance with the rules of operation

Relevância:

30.00% 30.00%

Publicador:

Resumo:

O processo de desenvolvimento de produto é reconhecido pela literatura como sendo de importância estratégica, mas, apesar disso, existe uma grande dificuldade para se gerenciar este processo, devido a existência de diversas visões parciais sobre sua abrangência e importância, as quais dificultam a integração entre os profissionais que atuam nessa área. No campo de ensino e pesquisa esse fenômeno também ocorre, pois o desenvolvimento de produtos é tratado de maneira incompleta pelas diferentes áreas de conhecimento especializado, criando visões parciais que apresentam linguagem e características próprias, as quais dificultam um entendimento comum dos aspectos desse processo. Para enfrentar esta situação, esse trabalho apresenta a experiência de grupos de pesquisa que formaram uma comunidade de prática em desenvolvimento de produtos, chamada PDPNet (Product Development Process Network), visando minimizar essas visões parciais. Para isso, os membros de tal comunidade envolveram-se no desenvolvimento de iniciativas e atividades conjuntas e têm a sua disposição um portal de conhecimentos para favorecer a sinergia entre os membros, apoiando o ambiente voltado à cooperação e facilitando a troca e criação de conhecimentos, o que é objetivo primordial de uma comunidade de prática. Este trabalho visa relatar e analisar criticamente as características principais da PDPNet, enfocando sua formação, estabelecimento, gestão das iniciativas e atividades para criação de conhecimentos, bem como a tecnologia de informação utilizada. Com esse trabalho, espera-se divulgar essa experiência para o meio acadêmico e empresarial interessado, de forma que suas práticas possam ser propagadas e as dificuldades consideradas. Além disso, espera-se que a análise crítica permita obter subsídios para que seus principais benefícios e dificuldades possam ser identificados e tratados pelos gestores da comunidade.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The final disposal of municipal solid waste in unsuitable areas without an infrastructure that meets the health measures and environmental protection, coupled with the lack of technical criteria in phase and decommissioning of the dump can promote environmental degradation. Alternatively to minimize the impacts of this activity for the stabilization of the area by isolating the massive waste with implementation of an adequate and finished by a layer of soil for plant growth final cover system. In this context, the present study aimed to evaluate the quality of the final cover in the area of a disabled dump the tropical semi-arid region in order to assist the process of recovery of these areas. The study area is located in the tropical semi-arid region in São João do Sabugi /RN. Soil samples were collected in the dump area and bushland as a benchmark of quality. To which they were subjected to analysis of physical attributes (particle density, bulk density, grain size and porosity), chemical properties (pH, K + , Na+ , Ca2 + , Mg2 + and Al3 + exchangeable, potential acidity, available phosphorus, sum of bases, CEC, base saturation, aluminum saturation, saturation Na + and adsorption ratio sodium, total organic carbon and total nitrogen) and total and soluble concentrations of heavy metals (Mn, Pb, Zn, Cd, Cu, Mo, Co, Cr, Ba and Ni). The differences between physical and chemical soil under native forest and final cover showing reduction of soil quality in the area off to the dump, which hinders the development of native vegetation and the recovery of the area. The absence of superior waterproofing to allow vertical transfer between the solid waste and the final cover promoted enrichment by chemical elements and heavy metals in excess can impair revegetation. Deficiencies found in the construction process of the final cover point to the need for intervention to accelerate the process of stabilization and recovery of the area of the local ecosystem

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Tailings dams are structures that aims to retain the solid waste and water from mining processes. Its analysis and planning begins with searching of location for deployment, step on which to bind all kinds of variables that directly or indirectly influence the work, such as geological, hydrological, tectonic, topographic, geotechnical, environmental, social characteristics, evaluation security risks, among others. Thus, this paper aims to present a study on the most appropriate and secure type of busbar to design a layout structure of iron ore tailings, taking into account all the above mentioned variables. The case study involves the assessment of sites for location of dams of tailings disposal beneficiation of iron mine to be built in Bonito, in the municipality of Jucurutu in Seridó Potiguar. For site selection among alternatives, various aspects of the current state of the art were considered, one that causes the least environmental impact, low cost investment, adding value to the product and especially the safety of the implanted structure mitigates the concern about induced earthquakes as a result of liquefaction wastes somatized by dams in the region, as the tilling of Mina Bonito is located practically in the hydraulic basin dam Armando Ribeiro in environmental protection (APA). The methodology compares induced by dams in the semiarid region with the characteristics of the waste disposal and sterile seismicity, taking into account the enhancement of liquefaction by the action of seismicity in the Mina Bonito region. With the fulcrum in the methodology, we indicated the best busbar type for disposal of tailings from iron ore or combination of them, to be designed and built in semiarid particularly for Mina Bonito. Also presents a number of possible uses for the tailings and in engineering activities, which may cause processing to the common good.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The Brazilian agricultural research agency has, over the years, contributed to solve social problems and to promote new knowledge, incorporating new advances and seeking technological independence of the country, through the transfer of knowledge and technology generated. However, the process of transfering of knowledge and technology has represented a big challenge for public institutions. The Embrapa is the largest and main brazilian agricultural research company, with a staff of 9.790 employees, being 2.440 researchers and an annual budget of R$ 2.52 billion. Operates through 46 decentralized research units, and coordinate of the National Agricultural Research System - SNPA. Considering that technology transfer is the consecration of effort and resources spent for the generation of knowledge and the validity of the research, this work aims to conduct an assessment of the performance of Embrapa Swine and Poultry along the production chain of broilers and propose a technology transfer model for this chain, which can be used by the Public Institutions Research – IPPs. This study is justified by the importance of agricultural research for the country, and the importance of the institution addressed. The methodology used was the case study with a qualitative approach, documentary and bibliographic research and interviews with use of semi-structured questionnaires. The survey was conducted in three stages. In the first stage, there was a diagnosis of the Technology Transfer Process (TT), the contribution of the Embrapa Swine and poultry for the supply chain for broiler. At this stage it was used bibliographical and documentary research and semi- structured interviews with agroindustrial broiler agents, researchers at Embrapa Swine and Poultry, professionals of technology transfer, from the Embrapa and Embrapa Swine and Poultry, managers of technology transfer and researchers from the Agricultural Research Service - ARS. In the second step, a model was developed for the technology transferring poultry process of Embrapa. In this phase, there were made documentary and bibliographic research and analysis of information obtained in the interviews. The third phase was to validate the proposed model in the various sectors of the broilers productive chain. The data show that, although the Embrapa Swine and Poultry develops technologies for broiler production chain, the rate of adoption of these technologies by the chain is very low. It was also diagnosed that there is a gap between the institution and the various links of the chain. It was proposed an observatory mechanism to approximate Embrapa Swine and Poultry and the agents of the broiler chain for identifying and discussing research priorities. The proposed model seeks to improve the interaction between the institution and the chain, in order to identify the chain real research demands and the search and the joint development of solutions for these demands. The proposed TT model was approved by a large majority (96.77%) of the interviewed agents who work in the various links in the chain, as well as by representatives (92%) of the entities linked to this chain. The acceptance of the proposed model demonstrates the willingness of the chain to approach Embrapa Swine and Poultry, and to seek joint solutions to existing problems.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The use of poorly water soluble molecules in pharmaceutical area has grown. Since these molecules exhibit low oral bioavailability, they are not used in intravenous administrations. Therefore, it is necessary to develop their new formulations with the aim to increase their oral bioavailabilities as to enable intravenous applications. One of the few possibilities in achieving this is a nanonization process that can produce crystals smaller than 1 μm by high pressure homogenization and without use of organic solvents. This mini-review describes technical aspects of the nanocrystal production, morphological aspects (polymorphisms), the market relevance of the nanocrystals products that are already in clinical phase or at the market, as well as, perspectives for the near future.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this research was to optimize osmotic dehydration of pineapple, according to two criteria: maximize water loss and minimize solid gain. The process was made as an application to Combined Methods Technology, in which three preservation factors were combined: water activity, pH and chemical preservatives, all being applied at low levels, in order to get a product resembling non-processed fruit. The experiment was divided into three treatments, being: non-coated pineapple pieces (A), pieces coated with alginate (B) and coated with low-methoxyl pectin (C). Process involved the following main steps: enzymatic inactivation of fruit pieces; in treatments B and C, incorporation of their respective coatings; and osmotic dehydration, in sucrose syrup containing potassium sorbate and citric acid. Optimum conditions, determined from Response Surface Methodology, were the following: dehydration of fruit pieces coated by alginate, at 42-47° C, in sucrose syrup at 66-69° Brix, for 220 to 270 minutes. Results indicated that both coatings significantly affected the mass transfers of the process, reducing solid incorporation and increasing water loss; therefore, increasing weight loss and performance ratio (water loss: solid incorporation) took place. Water activity was not significantly affected by the coatings. The product obtained under optimum conditions was submitted to sensorial evaluation, and presented a good general acceptance. Moulds and yeasts countings indicated good microbiological stability of the product for at least 60 days at 30ºC.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Universidade Estadual de Campinas . Faculdade de Educação Física