Análise cinemática e dinâmica para conversão de um VW saveiro em veículo elétrico

This work aims to kinematic and dynamic analysis of a VW Saveiro in order to estimate the power requested to the engine with the imposed movement conditions. Thus, the study will be the basis to the specification of the electric engine, on the conversion of the internal combustion vehicle into electric one. First of all, a literature review was done in order to understand the state of the art for this issue and come up with the technical features of the vehicle in question. The next step is the identification and calculation of all forces acting on the prototype in motion, from 0 to 120 km/h, in intervals of 10 km/h, under the defined conditions of path and time. Then, were determined the values of the torque and rotation of the components from the transmission system, as well as the engine power, for each speed range. The results show the most influential forces on the resistence of the movement in each speed range, and the behavior of the torque curve is verified. Finally, it was also analyzed the implementation of pinwheels on the frontal area of the vehicle, in order to convert wind energy into electrical energy to supply the lighting subsystem of the vehicle and the proposal was validated. Limiting the maximum speed of the vehicle to 90 km/h, it was finally concluded that the power of the electric engine should be 40 HP

Determinação da freqüência natural de eixos utilizando o software excel

This work aims to determine the first natural frequency of rotation shaft by using a basic software, Excel, and to compare it to the values obtained in laboratory. When an axle is submitted to a rotation, depending on the rotational frequency used, the axle can enter a state of resonance, in which the amplitude of vibration becomes rather high. The frequencies in which the resonance is observed depends on several parameters of the axle, including the number of concentrated masses associated to the axle. Thus, to obtain a computer program of easy use and access, which can preview the frequency of resonance of an axle in rotation with ‘n’ numbers of concentrated masses it has been studied how the frequency varies with each of these parameters. The computer program and the analyses have been made using the Rayleigh Method, which allowed the transformation of a continuous system to discrete through the theory of finite elements, which has proved that, the bigger the number of divisions of the shaft taken into consideration in the calculus of the natural frequency, the more this value gets close to the real value. The results obtained have been considered satisfactory once these have gotten close to the theoretical results expected

Dinâmica e controle de um sistema Maglev simplificado

Pós-graduação em Engenharia Mecânica - FEIS

Psicoterapia dinamica breve : uma intervenção alternativa na preparação psicologica de tenistas infanto-juvenis

Universidade Estadual de Campinas. Faculdade de Educação Física

Canoagem velocidade : dinamica das cargas de treinamento no macrociclo e a dinamica da alteração de marcadores funcionais externos

Universidade Estadual de Campinas . Faculdade de Educação Física

Futebol : as cargas concentradas de força e a dinamica da alteração das capacidades biomotoras no macrociclo anual de treinamento

Universidade Estadual de Campinas . Faculdade de Educação Física

Projeto da cadeia de suprimento: uma visão dinamica da decisão fazer versus comprar

Nos últimos anos, temos observado movimentos cíclicos na arquitetura da cadeia de suprimento de alguns setores produtivos. Ora temos o setor integrado verticalmente, composto por grandes empresas dominantes, ora temos o mesmo setor desintegrado horizontalmente, constituído por uma multidão de empresas atuando em nichos de mercado. Nesse ambiente altamente competitivo, o domínio de competências essenciais, com maior valor agregado, é decisivo para a sobrevivência de qualquer organização. Este artigo propõe facilitar a compreensão do assunto, analisando a evolução dos modelos tradicionais de decisão fazer versus comprar e avaliando sua adequação em setores da economia com elevada velocidade evolutiva.

DINAMICA MICROBIANA Y CALIDAD DE LA MATERIA ORGANICA DEL SUELO COMO INDICADORES DE SUSTENTABILIDAD EN EL CHACO ARIDO DE LA PROVINCIA DE CORDOBA Microbial dynamic and organic matter quality as indicators of soil sustainability in Dry Chaco of Córdoba Province

Se propone analizar el efecto del uso productivo en el Chaco Árido de la provincia de Córdoba, mediante la aplicación de indicadores de sustentabilidad relacionados con la calidad de la materia orgánica y la liberación de nutrientes en el suelo, con la finalidad de aportar a un tema de suma interes para la provincia de Córdoba como es la formulación de criterios y pautas de manejo para la implementación de la Ley de Bosques (N° 26331). Se trabajará en la localidad de San Miguel en el departamento Pocho, en un sitio de bosque no disturbado y en tres sistemas productivos: desmonte selectivo con implantación de pasturas; desmonte total con agricultura bajo riego y desmonte total sobrepastoreado. En cada sitio se medirá “in situ” la emisión de CO2 y se tomaran muestras de suelo a las que se les determinará: a) contenido de materia orgánica total (MO), b) contenido de sustancias húmicas (SH), diferenciando ácidos húmicos (AH) y fúlvicos (AF), c) abundancia y actividad de microorganismos nitrificadores y d) propiedades químicas de los AH y AF. Se calcularán los siguientes índices de sustentabilidad a) materia orgánica biodisponible (MOB=MO–SH); b) índice de humificación (IH=SH/MO); c) tipo de humus (TH=AF/AH; d) índice de mineralización de C (IMC=CO2/MO); e) índice de nitrificación (IN=actividad/abundancia); y f) índice de estabilidad de las fracciones humificadas: compuestos aromáticos/ alifáticos. Los datos serán analizados estadísticamente mediante ANOVA y comparación de medias por LSD (P<0.05) y tests multivariados. We proposed analyze the effect of land use in Arid Chaco of Cordoba province, using sustainability indicators related to organic matter quality and nutrient release in soil, with the aim to formulate management criteria for the implementation of the Ley de Bosques (N° 26331) in Córdoba province. The study will be conducted in San Miguel village in Pocho department, in one undisturbed forest site and three productive systems: selective clearing with grass sowing; total clearing with irrigation agriculture and total clearing with overgrazed. In each site "in situ" CO2 emission will be measured and soil samples will be taken, in which the following parameters will be determined: a) total organic matter content (MO), b) humic substances content (SH), in humic acids (AH) and fulvic acids (AF), c) abundance and activity of nitrifier microorganisms and d) chemical properties of AH and AF. The sustainability indexes will be calculated: biodisponible organic matter (MOB=MO–SH); b) humification index (IH=SH/MO); c) humus type (TH=AF/AH; d) C mineralization index (IMC=CO2/MO); e) nitrifying index (IN=activity/abundance); and f) humic fractions stability index: aromatic/aliphatic compounds. The data will be statistically analyzed by ANOVA and the means will be compared by LSD (P<0.05) and multivariate tests.

Dinamica y manejo de poblaciones de malas hierbas

El presente trabajo es una revisión de la modelización de estudios de dinámica de poblaciones de malas hierbas, que fue presentada como ponencia en el XVIII Congresso Brasile iro de Herbicida s e Plant as Daninh as en 1991, Brasília. Partiendo de la población, como unidad básica de los ecosistemas agrarios, se relacionan diferentes modelos de dinámica incluyendo el fenómeno de competencia intra específica, la evolución del banco de semillas y aplicaciones a la asociación cultivo y mala hierba. A través de los diagramas de ciclos vitales, que relacionan los estados funcionales y los procesos demográficos, se llega al establecimiento del modelo matricial.

Estudio de las maquinas eléctricas para el ingeniero en electrónica

Tesis (Maestría en Ciencias de la Ingenieria Electrica con Especialidad en Electrónica) UANL