Is characterizing the digital forensic facial reconstruction with hair necessary? A familiar assessors' analysis

Background: In the international scientific literature, there are few studies that emphasize the presence or absence of hair in forensic facial reconstructions. There are neither Brazilian studies concerning digital facial reconstructions without hair, nor research comparing recognition tests between digital facial reconstructions with hair and without hair. The miscegenation of Brazilian people is considerable. Brazilian people, and, in particular, Brazilian women, even if considered as Caucasoid, may present the hair in very different ways: curly, wavy or straight, blonde, red, brown or black, long or short, etc. For this reason, it is difficult to find a correct type of hair for facial reconstruction (unless, in real cases, some hair is recovered with the skeletal remains). Aims and methods: This study focuses on the performance of three different digital forensic facial reconstructions, without hair, of a Brazilian female subject (based on one international database and two Brazilian databases for soft facial-tissue thickness) and evaluates the digital forensic facial reconstructions comparing them to photographs of the target individual and nine other subjects, employing the recognition method. A total of 22 assessors participated in the recognition process; all of them were familiar with the 10 individuals who composed the face pool. Results and conclusions: The target subject was correctly recognized by 41% of the 22 examiners in the International Pattern, by 32% in the Brazilian Magnetic Resonance Pattern and by 32% in the Brazilian Fresh Cadavers Pattern. The facial reconstructions without hair were correctly recognized using the three databases of facial soft-tissue thickness. The observed results were higher than the results obtained using facial reconstructions with hair, from the same skull, which can indicate that it is better to not use hair, at least when there is no information concerning its characteristics. © 2013 Elsevier B.V. All rights reserved.

Tests of one Brazilian facial reconstruction method using three soft tissue depth sets and familiar assessors

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Tests of one Brazilian facial reconstruction method using three soft tissue depth sets and familiar assessors

Facial reconstruction is a method that seeks to recreate a person's facial appearance from his/her skull. This technique can be the last resource used in a forensic investigation, when identification techniques such as DNA analysis, dental records, fingerprints and radiographic comparison cannot be used to identify a body or skeletal remains. To perform facial reconstruction, the data of facial soft tissue thickness are necessary. Scientific literature has described differences in the thickness of facial soft tissue between ethnic groups. There are different databases of soft tissue thickness published in the scientific literature. There are no literature records of facial reconstruction works carried out with data of soft tissues obtained from samples of Brazilian subjects. There are also no reports of digital forensic facial reconstruction performed in Brazil. There are two databases of soft tissue thickness published for the Brazilian population: one obtained from measurements performed in fresh cadavers (fresh cadavers' pattern), and another from measurements using magnetic resonance imaging (Magnetic Resonance pattern). This study aims to perform three different characterized digital forensic facial reconstructions (with hair, eyelashes and eyebrows) of a Brazilian subject (based on an international pattern and two Brazilian patterns for soft facial tissue thickness), and evaluate the digital forensic facial reconstructions comparing them to photos of the individual and other nine subjects. The DICOM data of the Computed Tomography (CT) donated by a volunteer were converted into stereolitography (STL) files and used for the creation of the digital facial reconstructions. Once the three reconstructions were performed, they were compared to photographs of the subject who had the face reconstructed and nine other subjects. Thirty examiners participated in this recognition process. The target subject was recognized by 26.67% of the examiners in the reconstruction performed with the Brazilian Magnetic Resonance Pattern, 23.33% in the reconstruction performed with the Brazilian Fresh Cadavers Pattern and 20.00% in the reconstruction performed with the International Pattern, in which the target-subject was the most recognized subject in the first two patterns. The rate of correct recognitions of the target subject indicate that the digital forensic facial reconstruction, conducted with parameters used in this study, may be a useful tool. (C) 2011 Elsevier Ireland Ltd. All rights reserved.

Digital forensic osteology--possibilities in cooperation with the Virtopsy project.

The present study was carried out to check whether classic osteometric parameters can be determined from the 3D reconstructions of MSCT (multislice computed tomography) scans acquired in the context of the Virtopsy project. To this end, four isolated and macerated skulls were examined by six examiners. First the skulls were conventionally (manually) measured using 32 internationally accepted linear measurements. Then the skulls were scanned by the use of MSCT with slice thicknesses of 1.25 mm and 0.63 mm, and the 33 measurements were virtually determined on the digital 3D reconstructions of the skulls. The results of the traditional and the digital measurements were compared for each examiner to figure out variations. Furthermore, several parameters were measured on the cranium and postcranium during an autopsy and compared to the values that had been measured on a 3D reconstruction from a previously acquired postmortem MSCT scan. The results indicate that equivalent osteometric values can be obtained from digital 3D reconstructions from MSCT scans using a slice thickness of 1.25 mm, and from conventional manual examinations. The measurements taken from a corpse during an autopsy could also be validated with the methods used for the digital 3D reconstructions in the context of the Virtopsy project. Future aims are the assessment and biostatistical evaluation in respect to sex, age and stature of all data sets stored in the Virtopsy project so far, as well as of future data sets. Furthermore, a definition of new parameters, only measurable with the aid of MSCT data would be conceivable.

Sir Isaac Brock Facial Reconstruction Project, n.d.

Christian Cardell Corbet, a descendant of Guernsey, Channel Islands, was born in 1966 at Pickering Beach on Lake Ontario. He developed his talents as a landscape artist and at the young age of 14 he began his informal education in commercial signage from his paternal grandfather. He studied at the University of Guelph and McMaster University Anatomy Laboratory. Corbet traveled to England where he began to experiment more in abstraction and non-objective work. In 1995, he presented a portrait of HM Queen Elizabeth the Queen Mother at Clarence House. This brought his career to an international level. He also creates two-dimensional works and has received acclaim for his bronze art medallions. He has gained international recognition as a Forensic Artist working as Artist in Residence for the University of Western Ontario. He does facial reconstructions for special assignments. These original drawings relate to a sculpted medallion of Brock which was authorized by Sir Geoffrey Rowland, Bailiff, Guernsey, Channel Islands and Minister of Education of the States of Guernsey. This is the first time in known recorded history that a forensic analysis and sculpture has been created to accurately depict the facial likeness of Sir Isaac Brock. This project has been established to mark the 2012 anniversary of the death of Brock.

Digital forensic osteology--possibilities in cooperation with the Virtopsy project

The present study was carried out to check whether classic osteometric parameters can be determined from the 3D reconstructions of MSCT (multislice computed tomography) scans acquired in the context of the Virtopsy project. To this end, four isolated and macerated skulls were examined by six examiners. First the skulls were conventionally (manually) measured using 32 internationally accepted linear measurements. Then the skulls were scanned by the use of MSCT with slice thicknesses of 1.25 mm and 0.63 mm, and the 33 measurements were virtually determined on the digital 3D reconstructions of the skulls. The results of the traditional and the digital measurements were compared for each examiner to figure out variations. Furthermore, several parameters were measured on the cranium and postcranium during an autopsy and compared to the values that had been measured on a 3D reconstruction from a previously acquired postmortem MSCT scan. The results indicate that equivalent osteometric values can be obtained from digital 3D reconstructions from MSCT scans using a slice thickness of 1.25 mm, and from conventional manual examinations. The measurements taken from a corpse during an autopsy could also be validated with the methods used for the digital 3D reconstructions in the context of the Virtopsy project. Future aims are the assessment and biostatistical evaluation in respect to sex, age and stature of all data sets stored in the Virtopsy project so far, as well as of future data sets. Furthermore, a definition of new parameters, only measurable with the aid of MSCT data would be conceivable.

Transposition of first digital pad for reconstruction of a palmar antebrachial soft tissue defect in a cat

An 8-year-old female neutered Siamese cat was presented with a recent history of incomplete excision of an apocrine gland adenocarcinoma from the palmar aspect of the right antebrachium, just proximal to the carpal joint. There was no evidence of metastasis. Wide surgical excision of the previous surgery site was performed resulting in a soft tissue defect. Partial reconstruction was achieved using digital pad transposition of the first digit (dewclaw), forming a local axial pattern flap that was transposed into the adjacent defect. The remaining defect was closed by primary apposition. The skin flap healed successfully. Some breakdown of the skin closed by primary apposition necessitated open wound management. The cosmetic and functional result of the first digital pad transposition was considered excellent, rendering it a useful means to reconstruct soft tissue defects in the carpal region.

Patients' Satisfaction After Surgical Facial Reconstruction or After Rehabilitation With Maxillofacial Prosthesis

The matching of the aesthetic, functional, and psychosocial results of a facial deformity may produce devastating effects in its carriers, especially if the lesion is extensive or the treatment is aggressive. Because of this, the objective of the present article was to evaluate patient's satisfaction rating after surgical facial reconstruction or rehabilitation with oral and maxillofacial prosthesis, by means of reviewing the literature.

Surgical-allogeneic facial reconstruction: facial transplants

Several factors including cancer, malformations and traumas may cause large facial mutilation. These functional and aesthetic deformities negatively affect the psychological perspectives and quality of life of the mutilated patient. Conventional treatments are prone to fail aesthetically and functionally. The recent introduction of the composite tissue allotransplantation (CTA), which uses transplanted facial tissues of healthy donors to recover the damaged or non-existent facial tissue of mutilated patients, resulted in greater clinical results. Therefore, the present study aims to conduct a literature review on the relevance and effectiveness of facial transplants in mutilated subjects. It was observed that the facial transplants recovered both the aesthetics and function of these patients and consequently improved their quality of life.

Reconstrução facial forense: comparação entre tabelas de espessuras de tecidos moles faciais

As Ciências Forenses empregam a técnica de Reconstrução Facial buscando aumentar as possibilidades de reconhecimento humano. Após análise antropológica, a face é esculpida sobre o crânio esqueletizado e divulgada na mídia. Existem várias metodologias para a modelagem do rosto e das características da face, bem como vários dados de espessuras de tecidos moles que auxiliam no contorno facial. Com o intuito de investigar se existe uma metodologia que favoreça mais reconhecimentos e que permita uma maior semelhança com o indivíduo, este trabalho buscou comparar reconstruções faciais manuais feitas com duas abordagens para o preenchimento dos tecidos moles (métodos Americano e de Manchester) e para a predição dos olhos, nariz, boca e orelhas. Também buscou comparar reconstruções realizadas com quatro tabelas de espessuras de tecidos moles, desenvolvidas para brasileiros por estudos prévios, observando a possibilidade de unir esses dados para auxiliar na reconstrução. Um quarto objetivo foi averiguar se existe influência do sexo e do conhecimento anatômico ou forense na frequência de reconhecimentos. O estudo foi dividido em duas fases. Na primeira, duas reconstruções foram realizadas para dois indivíduos alvos (um homem e uma mulher) com os métodos Americano e de Manchester, aplicando dois guias para olhos, nariz, boca e orelhas. As reconstruções foram avaliadas por quarenta indivíduos (homens e mulheres, divididos em 4 grupos - alunos de graduação em Odontologia que não passaram pela disciplina de Odontologia Legal, alunos de graduação em Odontologia que passaram pela disciplina, especialistas em Odontologia Legal e indivíduos que não possuíam conhecimento de anatomia humana) por meio dos testes de reconhecimento e semelhança. Para o alvo feminino, as frequências de reconhecimentos foram 20% e 10% para os métodos Americano e de Manchester, respectivamente; para o alvo masculino, as frequências foram 35% e 17,5%. Em relação à semelhança, as medianas foram menores que 3 (em uma escala de 1 a 5); entretanto, foi verificada uma exceção para a escultura feita com o método Americano para o alvo masculino, a qual apresentou mediana 3. Na segunda fase, reconstruções faciais para quatro alvos (dois homens e duas mulheres) foram obtidas com o método Americano, considerando as quatro tabelas de espessuras de tecidos moles para brasileiros. Dezesseis reconstruções foram avaliadas por cento e vinte indivíduos, também pelos testes de reconhecimento e semelhança. Assim como na fase I, foram considerados o sexo e o grupo dos avaliadores. Para o alvo 1, as proporções de acertos são significativamente maiores para reconstruções feitas com as tabelas de cadáveres (44% e 38%) em relação às com os dados de exames de imagem. Para o alvo 4, as proporções de acertos com os dados de cadáveres (Tedeschi-Oliveira et al.) e com os de ressonância magnética foram significativamente maiores comparados às reconstruções com dados de tomografias computadorizadas. Em relação à semelhança, somente o alvo 1 mostrou diferenças significativas de frequências de semelhança leve entre reconstruções. Além disso, não houve influência nem do sexo, nem do conhecimento de anatomia nas frequências de reconhecimentos corretos. Espera-se que a tabela proposta possa ser empregada para a população brasileira.

Assisting digital forensic analysis via exploratory information visualisation

Background: Digital forensics is a rapidly expanding field, due to the continuing advances in computer technology and increases in data stage capabilities of devices. However, the tools supporting digital forensics investigations have not kept pace with this evolution, often leaving the investigator to analyse large volumes of textual data and rely heavily on their own intuition and experience. Aim: This research proposes that given the ability of information visualisation to provide an end user with an intuitive way to rapidly analyse large volumes of complex data, such approached could be applied to digital forensics datasets. Such methods will be investigated; supported by a review of literature regarding the use of such techniques in other fields. The hypothesis of this research body is that by utilising exploratory information visualisation techniques in the form of a tool to support digital forensic investigations, gains in investigative effectiveness can be realised. Method:To test the hypothesis, this research examines three different case studies which look at different forms of information visualisation and their implementation with a digital forensic dataset. Two of these case studies take the form of prototype tools developed by the researcher, and one case study utilises a tool created by a third party research group. A pilot study by the researcher is conducted on these cases, with the strengths and weaknesses of each being drawn into the next case study. The culmination of these case studies is a prototype tool which was developed to resemble a timeline visualisation of the user behaviour on a device. This tool was subjected to an experiment involving a class of university digital forensics students who were given a number of questions about a synthetic digital forensic dataset. Approximately half were given the prototype tool, named Insight, to use, and the others given a common open-source tool. The assessed metrics included: how long the participants took to complete all tasks, how accurate their answers to the tasks were, and how easy the participants found the tasks to complete. They were also asked for their feedback at multiple points throughout the task. Results:The results showed that there was a statistically significant increase in accuracy for one of the six tasks for the participants using the Insight prototype tool. Participants also found completing two of the six tasks significantly easier when using the prototype tool. There were no statistically significant different difference between the completion times of both participant groups. There were no statistically significant differences in the accuracy of participant answers for five of the six tasks. Conclusions: The results from this body of research show that there is evidence to suggest that there is the potential for gains in investigative effectiveness when information visualisation techniques are applied to a digital forensic dataset. Specifically, in some scenarios, the investigator can draw conclusions which are more accurate than those drawn when using primarily textual tools. There is also evidence so suggest that the investigators found these conclusions to be reached significantly more easily when using a tool with a visual format. None of the scenarios led to the investigators being at a significant disadvantage in terms of accuracy or usability when using the prototype visual tool over the textual tool. It is noted that this research did not show that the use of information visualisation techniques leads to any statistically significant difference in the time taken to complete a digital forensics investigation.

Using multiple GPUs to accelerate string searching for digital forensic analysis

String searching within a large corpus of data is an important component of digital forensic (DF) analysis techniques such as file carving. The continuing increase in capacity of consumer storage devices requires corresponding im-provements to the performance of string searching techniques. As string search-ing is a trivially-parallelisable problem, GPGPU approaches are a natural fit – but previous studies have found that local storage presents an insurmountable performance bottleneck. We show that this need not be the case with modern hardware, and demonstrate substantial performance improvements from the use of single and multiple GPUs when searching for strings within a typical forensic disk image.

Aproximação facial forense: relação entre as estruturas ósseas e a porção inferior do nariz

Este trabalho teve o propósito de avaliar a relação entre a cartilagem alar e a abertura piriforme a partir de imagens de tomografia computadorizada cone-beam e a relação do nariz com o padrão esquelético vertical da face. A pesquisa foi realizada com 96 imagens de indivíduos de ambos os sexos (49 masculino e 47 feminino), com idades entre 18 e 65 anos classificados de acordo com sua tipologia facial. Para a realização das marcações e mensurações de interesse foi utilizado o software OsiriX. A tipologia facial foi acessada através de três metodologias: índice facial, ângulo goníaco e proporção entre as alturas faciais. No corte axial da imagem de tomografia computadorizada, foram aferidas quatro grandezas lineares: largura do nariz externo, distância entre as inserções alares, extensão da base da abertura piriforme e máxima largura da abertura piriforme. Todas as grandezas foram mensuradas por dois examinadores em concordância. A análise dos resultados obtidos mostrou que há correlação entre as larguras do nariz externo e da abertura piriforme e entre a base da cavidade nasal e a distância entre as inserções alares. A largura da abertura piriforme aumenta proporcionalmente mais que a do nariz. Além disso, a tipologia facial longa associa-se à largura nasal.

Beyond the sphere of the English facial approximation literature: Ramifications of German papers on western method concepts

In the English literature, facial approximation methods have been commonly classified into three types: Russian, American, or Combination. These categorizations are based on the protocols used, for example, whether methods use average soft-tissue depths (American methods) or require face muscle construction (Russian methods). However, literature searches outside the usual realm of English publications reveal key papers that demonstrate that the Russian category above has been founded on distorted views. In reality, Russian methods are based on limited face muscle construction, with heavy reliance on modified average soft-tissue depths. A closer inspection of the American method also reveals inconsistencies with the recognized classification scheme. This investigation thus demonstrates that all major methods of facial approximation depend on both face anatomy and average soft-tissue depths, rendering common method classification schemes redundant. The best way forward appears to be for practitioners to describe the methods they use (including the weight each one gives to average soft-tissue depths and deep face tissue construction) without placing them in any categorical classificatory group or giving them an ambiguous name. The state of this situation may need to be reviewed in the future in light of new research results and paradigms.

Assessing facial approximation accuracy: How do resemblance ratings of disparate faces compare to recognition tests?

In the past, the accuracy of facial approximations has been assessed by resemblance ratings (i.e., the comparison of a facial approximation directly to a target individual) and recognition tests (e.g., the comparison of a facial approximation to a photo array of faces including foils and a target individual). Recently, several research studies have indicated that recognition tests hold major strengths in contrast to resemblance ratings. However, resemblance ratings remain popularly employed and/or are given weighting when judging facial approximations, thus indicating that no consensus has been reached. This study aims to further investigate the matter by comparing the results of resemblance ratings and recognition tests for two facial approximations which clearly differed in their morphological appearance. One facial approximation was constructed by an experienced practitioner privy to the appearance of the target individual (practitioner had direct access to an antemortem frontal photograph during face construction), while the other facial approximation was constructed by a novice under blind conditions. Both facial approximations, whilst clearly morphologically different, were given similar resemblance scores even though recognition test results produced vastly different results. One facial approximation was correctly recognized almost without exception while the other was not correctly recognized above chance rates. These results suggest that resemblance ratings are insensitive measures of the accuracy of facial approximations and lend further weight to the use of recognition tests in facial approximation assessment. (c) 2006 Elsevier Ireland Ltd. All rights reserved.